2019 Suzuki 40 HP DF40ATL2 Outboard Motor
This is the only engine in the 40 hp class to offer DOHC performance, and also the only engine in its class to incorporate a maintenance-free, oil-bathed timing chain, which provides the outboard with increased durability and maintenance free operation. With larger displacements for increased power and performance, Suzuki's Lean Control System for improved fuel economy and designs that are more compact and lighter in weight than the predecessor, the new DF40A engines also incorporate the Suzuki Troll Mode System. During the 2011 Miami Boat Show, the Boating Writers of America presented Suzuki Marine with the NMMA Innovation Award for the DF40A/DF50A.
Features
Multi Point Sequential Electronic Fuel Injection
Suzuki Lean Burn Control System
Suzuki Troll Mode System
Direct Ignition
Suzuki Easy Start System
Over-Rev. Limiter
Low Oil Pressure Caution
Fully Transistorized Ignition
Timing Chain
Fresh Water Flushing System
Power Trim and Tilt
Suzuki Anti-Corrosion System
Specifications
Recommended Transom Height (inches): L: 20
Starting System: Electric
Weight (lb.): L: 229
Engine Type: DOHC 12-Valve
Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection
Number of Cylinders: 3
Piston Displacement inches (cc): 57.4 (941)
Bore x Stroke inches (mm): 2.85 x 2.99 (72.5 x 76)
Maximum Output HP: 40
Operating Range (rpm): 5000 - 6000
Steering: Remote (Tiller Kit Optional)
Oil Pan Capacity quarts (liter): 2.9 (2.7)
Ignition System: Solid State Direct Ignition
Alternator: 12V 19A
Trim Position: Power Trim and Tilt
Gear Ratio: 2.27:1
Standard Propeller: Optional See Dealer
Propeller Selection: 9 - 17
2019 Honda 25 HP BF25D3LRG Outboard Motor
For mid and smaller horsepower needs, there is plenty of punch in the Honda BF30 and BF25. But it is power you will feel and never hear. That because all Hondas are whisper quiet. So extraordinarily quiet, we donot have to put extra dampening insulation in the cowling like most manufacturers do.
Instead we pack em full of features. Like a Center Mount Tiller with up-front controls. The 3 to 3 Induction system that provides smooth, quiet operation. And Autostart Enrichment, which makes starting a breeze.
And of course, the exceptionally durable BF25 and BF30 are backed by the best standard warranty you can get. The end result? More good times on the water.
Condition New
Stock Number BF25D3LRG
Year 2019
Make Honda Marine
Model BF25 L Type
Fuel Type Gas
Vehicle Type Outboard
Category Four Stroke
Engine 4-Stroke SOHC 3 Cylinder - 2 Valves/ Cyl.
Propulsion Single Outboard
Propulsion Type Powered
Number of Engines 1
Engine Type Outboard
Engine Power 25 HP
Dry Weight 160 lbs
2019 Evinrude 40 HP E40DRGL Outboard Motor
Engine
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke: 3.62 x 2.60 in. (92 x 66 mm)
Displacement: 52.7 cu.in. (863cc)
Starting: Rope (Electric Accessory)
Dimensions
Shaft Length: 20 in. (508 mm)
Weight: 232 lb. (105 kg)
General
Trim Method: Manual
Propshaft Horsepower: 40 hp
Full Throttle Operating Range: 5500-6000 rpm
Gear Ratio / Shift: 2.9:1
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator: 81 Amps Total / 25 Net Dedicated
Steering: Tiller
Warranty: 3-Year, Non-Declining
Features
Auto-Storage: The auto winterization feature fogs the engines itself in minutes, with no trip to the dealer. An Evinrude E-TEC engine does not require belts, camshafts or exhaust valves, which means there are fewer parts to wear down or malfunction than a four--stroke outboard. Extend the life of your outboard and your boating season.
More Miles Per Hour: Get even more extra miles per hour with the Straight Leading Edge gearcase. The Evinrude SLE gearcase features high-efficiency water pickups and a weed-slicing shape up front, for a cooler-running engine and ultimate durability and reliability in the long run.
Specifications
Engine Model: E40DRGL Graphite
Engine Type: Inline 2-Cylinder E-TEC D.I.
Bore x Stroke - in (mm): 3.62 x 2.60 (92 x 66)
Displacement - cu in (cc) L: 52.7 (863)
Gear Ratio: 2.9:1
Full Throttle RPM Range: 5500-6000 RPM
Weight - lbs (kg): 232 (105)
Starting: Rope (Electric Accessory)
Controls: Mechanical
Fuel Induction: E-TEC Direct Injection with stratified low RPM combustion mode
Alternator Output*: 81 Amps Total / 25 Net Dedicated
Steering: Tiller
Trim Method: Manual
Trim Range: -4�° to 16�°
Tilt Range: 65�°
Shaft Length - in (mm): 20 (508)
Lubrication: Multi-Point Targeted Oiling
Oil Tank Capacity - gal (L): 2 (1.9)
Recommended Oil: Evinrude / Johnson XD-100 Oil
Recommended Fuel: 87 Octane
Warranty: 3-Year, Non-Declining
Emissions Compliance: EPA 2013 / CARB 3 STAR / European Union
Specifications
Engine Type: Yamaha T25XWTC High Thrust Four Stroke
Horsepower: 25 hp
Cylinders: 2 cyl
Shaft Length: 25"
Steering: Remote Mech
Starter: Electric + Manual
Weight: 154 lbs
Full Throttle Range: 5000 - 6000 rpm
Displacement: 432cc
Induction System: EFI
Warranty: 3 years
