Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber,
It builds favourable properties which make it high performance polymer, compressible and heat resistance.
TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength
Properties
High temperature resistance
Wide range of hardnesses
Resistance to chemicals and weathering
Low compression set
Flex fatigue resistance
Lightweight
Good colourability
Typical Applications
Interior and Exterior Automotive parts
Wire & Cable Jacketing compound
Gaskets
Grommet, sockets
Building and construction materials
Sporting goods
Electrical and electronics good
Specification
Hardness
Set(ISO 868) (Shore A-D) 40 A - 55 D
Density
(g/cm3) 0.93 - 1.1
Compression(Set) Excellent
Tensile Set (ISO 527) 3 MPa 10 MPa
Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3
Elongation Set (ISO 527) (%) 500 1000
Working Temp. Max. (C) 140
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Good
Motor Oil Resistance Excellent
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed
Properties
Good Dimension Stability
High Impact Strength
Good Heat Aging Properties
Low Density
Good Chemical Resistance
Good Processability
Low Cost
Extensive Compounding capabilities
Good Recyclability
Non-hygroscopic, pre-drying is not necessary
Coloured grades available
Typical Applications
Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs
Industrial products- gasket & seal, weather striping etc.
Appliance and housewares Products
Sporting goods
Personal Care goods
Wire and cable Flexible cord, welding cable jacket , automotive wire & cable
Health care
Specification missing -take from website
Specification
Hardness
Set(ISO 868) (Shore A-D) 50 �??-60 D
Density
(g/cm3) 0.88 1.12
Compression(Set) Very Good
Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3
Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3
Elongation Set (ISO 527) (%) 400 - 1000
Working Temp. Max. (C) 100
Working Temp. Min.(C) -40
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Medium
Motor Oil Resistance Medium
Acid-Base Resistance Excellent
UV-Ozone Stability Excellent
Wide hardness range
Does not require vulcanisation-quire higher saving on the processing costs
Remains flexible at low temperatures
High temperature resistance
Electrical insulator with very low conductivity
Has grades with very low compression set
Grades having excellent abrasion resistance
Excellent tear resistance
100% recyclable
PVC free
Resistance to solvents
Resistance to oil
Resistance to acids bases and detergents
Resistance to UV and ozone
Resistance to bacterial and fungus growth
Has low toxic potential, with many grades conforming with FDA regulations
Halogen free flame retardancy (VO-V1-V2)
Colored grades available
Allows direct colouring during processing by utilizing PP or PE based color
2-shot molding onto wide range of plasics
Suitable for co-extrusion process
Thermoplastic elastomers (TPEs) are also known as thermoplastic rubbers. These are a class of copolymers, which are used are plastic and rubber that includes a material with both thermoplastic and elastomeric properties. With the help of compounds as SBS or SEBS it forms Thermoplastic elastomers which are known as TPE, it facilitates to know the general level of performance and asset of the compound
Properties
grades and transparent grades available
Household Appliances
Consumable Goods
Pleasant Surface Feel (Soft Touch)
Adhesion to Polar thermoplastic such as ABS, PC & PP
Good Tear strength, abrasion resistance
High Flexibility
Durability
Low compression set
Typical Applications
Kitchen
Utensils
Household Articles
Soft GripSeals
manufacture of shoe sole material
shock-absorbing material
packing material grips
anti-slip pads, rubber and plastic modification
Specification
Hardness
Set(ISO 868) (Shore A-D) 30 A - 50 D
Density
(g/cm3) 0.88 1.4
Compression(Set) Good
Tensile Set (ISO 527) 1.5 MPa 12 MPa
Tear Set (ISO 34) 20 kg/cm3 - 60 kg/cm3
Elongation Set (ISO 527) (%) 300 - 1200
Working Temp. Max. (C) 130
Working Temp. Min.(C) -30
Adhesion PP/ABS/HIPS/SAN/PC/NYLON
Solvent Resistance Medium
Motor Oil Resistance Good
Acid-Base Resistance Excellent
UV-Ozone Stability Medium
FlexiShine Pollyblends has launched a next-generation technology to create glass-filled PP compounds. We create compounds with unprecedented strength. Glass Filled PP Compound is prepared by compounding Polypropylene Homo-Polymer with a fine grade of glass. The entire process followed as par the industry standard and up to mark of all grades which are suggested by the authorities.
Glass-Filled PP Compound manufacturers in India use a special technique to increase the long term thermal-mechanical properties. We use some additives like antioxidants, lubricant, processing aid. It shows good dispersibility and excellent balance of properties in the final product if some compounds are used directly or diluted with desired grades of polypropylenes.
FEATURES
High strength
High chemical resistance
High melting point (150 to 200F)
Very low density
Abrasion resistance
Lightweight
Low-cost fabrications
Machinable
Maintenance-free
Weldable
Wipes clean
Dimensional stability
Excellent electrical properties
Typical Applications
Acid Tank/Lineup
Battery Cases
Tank Covers
Etching
Machines/Rinse Tubes
Machined Parts
Fume Hoods
Ducts
Scrub Stations
Metal Plating Barrel