L 50 x 50 x6
L 75 x 75 x 8
L 100 x 100 x 8
2L 150X150X8
2L 200X150X12
ANGLE A36 / EN 10025 S275 P91
L 50 x 50 x6
L 75 x 75 x 8
L 100 x 100 x 8
2L 150X150X8
2L 200X150X12
HAND RAIL ASTM A106B
PIPE 1-1/4", SCH 40
CHANNEL ASTM - A36 OR IS: 2062 GR. BR A36 / EN 10025 S275
ISMC 125 /150/200/250
UPN 100 / UPN 140 / UPN 200 UPN 240 / UPN 300
Surface of Table: 32 x 7 - 60x12
No. of TEE slots: 3
Vertical Travel: ½ 5/8
Swivel of table: 450
Longitudinal Transverse: 15 30
Cross Transverse: 6 10
Vertical Transverse: 13 -22
Taper of spindle: ISO -40
RPM of spindle: 50-750
No of spindle speed: 7-9
Weight Approx: 500kg 2050kg
Length of the bed: 1828 mm 3657mm
Width of the bed: 350 mm- 600 mm
Height of centre: 300mm 550 mm
Swing Over Slide: 430 mm 863mm
Swing in Gap: 914mm 1473mm
Admit Between Centers: 838mm -2363mm
Spindle Hollow: 53mm 103mm
Type of Bed: Pedestal
Hp.Required: 2*960,3*960,5*960
Length of the bed: 6½ Ft 14Ft
Width of the bed: 375 mm- 550 mm
Height of centre: 300mm 500 mm
Swing Over Cross Slide: 325 mm 630mm
Swing Over Bed: 600 mm 1000 mm
Swing in Gap: 865 mm 1400 mm
Admit Between Center: 1000 mm -3000 mm
No. of Spindle speed: 8
Spindle Hollow: 65 mm 103mm
No of Feeds: 30
With Worth Threads TPI: 2-30
Electric Motor RPM: 3*1440,5*1440,7.5*1440
Length of the bed : 4.5 Ft 12 Ft
Width of the bed: 240 mm- 375 mm
Height of centre: 170 mm 300 mm
Swing Over Cross Slide: 180 mm 390mm
Swing Over Bed: 340 mm 600 mm
RPM: 60 1025 to 30-1050 18 H-L
Admit Between Center: 600 1500/2500
No. of Spindle speed: 8
Cross Slide Travel: 175 -375
Top Slide Travel: 125- 175
With Worth Threads TPI: 2-30
Lead Screw: 4 TPI
Main Motor: 1.5 kw 3.7 kw
Application : Industrial purpose
Type : Reciprocating compressor
Make : Demag/ Dresser Rand/ Flowserve/ Elgi
Model : SS 15 LB
Free Air delivery: 49.1 CFM (1390 lpm)
Maximum Pressure : 128 PSI (9 Kgf/cm²)
Piston displacement : 66.4 CFM (1853 lpm)
Motor Power : 11 KW (15 HP)
Air receiver : 500 Liters
Rotating speed: 925 Rpm
Net Weight : 514 Kg
Application : Drilling Rig
Type : Air screw compressor
Make : ELGI/ Atlas Copco/ Doosan-IR
Model : PG 600S-200/ XAVS 600
Maximum Air delivery : 600 CFM (16.99 m�³/min)
Maximum Pressure :200 PSI (14.1 Kgf/cm�²)
Engine : 6 CTA 8.3, Cummins
Length : 3115 -5453 mm
Width: 1250 -1927 mm
Height : 1620 - 2066 mm
Dry Weight : 2520 Kgs
Application : Drilling Rig
Type : Air screw compressor
Make : ELGI/ Atlas Copco/ Doosan-I
Model : XRH 1100 Excel/ PG 1100S-300
Maximum Air delivery :1100 CFM (31.15 m�³/min)
Maximum Pressure : 300 PSI (21.1 Kgf/cm�²)
Engine : NTA 855 BC, Cummins
Length: 3942 - 4326 mm
Width : 1600 - 1790 mm
Height : 1865 - 1956 mm
Dry Weight : 4100 - 5050 Kgs
Application: Drilling Rig
Type : Air screw compressor
Make: ELGI/ Atlas Copco/ Doosan-IR
Model : XRV 1200 Excel/ PG 1200S
Maximum Air delivery: 1200 CFM (33.98 m�³/min)
Maximum Pressure: 300 PSI (23.2 Kgf/cm�²)
Engine : NTA 855 BC, Cummins
Length : 3942 - 4326 mm
Width: 1600 - 1790 mm
Height:1865 - 1956 mm
Dry Weight: 4100 - 5050 Kgs
Application: Industrial purpose
Type : Reciprocating compressor
Make : Demag/ Dresser Rand/ Flowserve/ Elgi
Model : TS 15 LB
Free Air delivery : 44.1 CFM (1250 lpm)
Maximum Pressure : 175 PSI (12 Kgf/cm�²)
Piston displacement : 54.3 CFM (1535 lpm)
Motor Power : 11 KW (15 HP)
Air receiver: 500 Liters
Rotating speed: 1150 Rpm
Net Weight : 470 Kg
Lifting Capacity: 20 Ton
Height: 19.2 m
Engine Power: 101 Hp
Drive: 4WD
Power Source: Diesel , Hydrualic,Mechanical
Front Axle; 10040 kgs
Rear Axle: 10200 kgs
Power Rating : 20KVA
Electric Power: 16KWE
Rated Current: 22 Amp
Engine Model: AL2CTIDG1
Engine Power rated : 18.7 KW (25.4 HP)
No. of cylinders: 2
Piston displacement: 1.915 Liters
Fuel tank capacity: 55 Ltr
Battery capacity: 90 AH
Size (LXW): 2000mm X 900mm
Net Weight: 676 Kg
Power Rating : 40KVA
Electric Power: 32KWE
Rated Current: 55.65 Amp
Engine Model: AL4CTDG1
Engine Power rated : 39 KW (52.28 HP)
No. of cylinders: 4
Piston displacement: 4 Liters
Fuel tank capacity: 140 Ltr
Battery capacity: 90 AH
Size (LXW): 2500mm X 1100mm
Net Weight: 1075 Kg
Maximum Drilling diameter: 75 to 100 mm
Distance of spindle axis column: 450 to 2500 mm
Spindle nose & working surface: 400 to 2000 mm
Vertical travel of radial arm: 800 to 1000 mm
Travel of spindle head along arm: 1550 to 2000 mm
Column diameter: 450 to 550 mm
Spindle diameter: 85 to 104 mm
Spindle travel: 400 to 450 mm
Spindle speed: 20 to 1250 RPM (16 step)
Spindle feed: 0.04 to 3.2 mm/rotation (16 step)
Size of work table: 630x800 to 800x1000 mm
Motor power: 5.5 to 7.5 Kw
Weight: 7000 to 11000 Kg
Maximum Drilling diameter: 40 to 65 mm
Distance of spindle axis column: 320 to 1600 mm
Spindle nose & working surface: 90 to 1220 mm
Vertical travel of radial arm: 500 to 580 mm
Travel of spindle head along arm: 500 to 1250 mm
Column diameter: 300 to 350 mm
Spindle diameter: 60 to 79 mm
Spindle travel: 240 to 315 mm
Spindle speed: 75 to 2000 RPM (6 to 16 step)
Spindle feed: 0.1 to 3.2 mm/rotation (3 to 16 step)
Size of work table: 400x350 to 500x630 mm
Motor power: 1.5 to 3 Kw
Weight: 1800 to 3500 Kg
Maximum Drilling diameter: 125 to 150 mm
Distance of spindle axis column: 570 to 4000 mm
Spindle nose & working surface: 750 to 2500 mm
Vertical travel of radial arm: 1250 mm
Travel of spindle head along arm: 2580 to 3400 mm
Column diameter: 700 to 800 mm
Spindle diameter: 112 to 142 mm
Spindle travel: 500 to 560 mm
Spindle speed: 8 to 1000 RPM (22 step)
Spindle feed: 0.06 to 3.2 mm/rotation (16 step)
Size of work table: 800x1250
Motor power: 15 to 18.5 Kw
Weight: 20000 to 28500 Kg
PRO DRILLING RODS
ARC WELDED/ FRICTION WELDED
Size : 3" OD (76.2mm)-8" OD (203.2mm)
Length : 1.5 Meter(5FT) -6 meter ( 20ft)
PRO BUTTON BITS
Size : 3 22
OD : 76.0mm 560.0mm
Shank Length : 165.0mm 530.0mm
No. of Splines : 6 ? 12 Nos
Input Voltage240 V: 415 V
Input Phase: 3 No
Input Frequency: 60 Hz
Output Open Circuit Voltage: 89 V
Welding Current Range: 20- 500Amp
NICKEL ALLOY ASME FLANGES
UNS No2200,2201,4400,6600,6022,6625, 8800, 8020,8825, 8810,8811,8904,10276
ASME Class 150#/300#/600#/900#/1500#/2500#
Weld neck, Slip on, Socket Weld, Threaded, Blind, WNRTJ, SWRTJ., SORTJ.
Special Flange Like Tounge & Groove Flange, Spade, Spec. Blind
150#/300# 1/2" to 44â??
600# 12â?? to 12"
900#/1500#/2500# 12â??
Flangolet, Weldo Flange &nippo Flange
FLANGOLET, WELDO FLANGE &NIPPO FLANGE
UNS No 2200, 2201,4400,6600, 6022,6625, 8800, 8020,8825, 8810, 8811, 8904,10276
3000#/6000#/9000# ratings
Socket weld 1/2" to 3"
Threaded NPT & BSPT 1/8â?? to 2â??
Elbow 45 deg & 90 deg
Tee Equal & Reducing
Coupling Half, Full, Reducing
Reducing Bushes
Hex Nipple Equal & reducing
Union, Hex plug & caps
Reducing Inserts
Pipe Nipples
Concentric & Eccentric Swages 1/2" to 6â??
Piggeble Bends of 3D, 5D, 6D, 7D, 10D Radius
NICKEL ALLOY BRANCH OUTLET FITTINGS
UNS No 2200, 2201, 4400, 6600, 6022,
6625,8800,8020,8825,8810,8811,8904,10276
3000# / 6000#
Sockolet 1/2" to 3â??
Threadolet NPT & BSPT 1/4" To 3â??
Elbolet/Latrolet 1/2" to 3â??
Weldolet 1/2" to 8â??
Nipolet 1/2" to 2â??
LOWPRESSURE THREADED FITTINGS
UNS No 2200, 2201, 4400, 6600, 6022, 6625, 8800, 8020, 8825, 8810,8811, 8904, 10276
Class 150# BSP
1/8â?? to 6â??
Elbow 45 deg & 90 deg
Street elbow
Socket , Full & reducing
TOE Welding & TBE Barrel Nipple
Tees, Reducing bushes, Hex Nipple, Union,
Hex plugs, caps, Crosses, Hose Nipples, Hex Nuts.
NICKEL ALLOY TABLE FLANGES
UNS No 2200,2201,4400,6600,6022,6625,8800, 8020,8825,8810,8811,8904,10276
Table D, E & H
Slip on Pipe Bore , Threaded BSP & Blind
1/2" to 24"
AS 2129 Dimension
Fully Machined Both Sides.
High Density Impact Resistant PP Shell
With 4 point PE Suspension
With Adjustable Chin Strap
With Buckle for Adjustable Fitting
Color: White / Yellow / Royal Blue / Orange / Red / Green
Conforms to : CE EN397.2000 & ANSI Z89. 1 .2003
High Density Impact Resistant PP Shell
With 4 point Webbing Suspension
With Adjustable Chin Strap
Smooth Ratchet for Adjustable Fitting
Color: White / Yellow / Royal Blue / Orange / Red / Green
Conforms to: CE EN397.2000 & ANSI Z89.1. 2003
Standard - EN 397:1995
Shell : HDPE (High Density Polyethylene)
Cradle : 6 Point Plastic
Headband : LDPE (Low Density Polyethylene)
Color : White / Blue / Yellow
Sweatband
Capacity: 5 to 25 Tons
Piston size: 80 to 125 mm
Stroke Length: 250 to 300 mm
Day light: 300 to 400 mm
Shut height: 50 to 100 mm
Table size (L x W): 350 x 300 to 450 x 300
Approach speed: 20 to 30 mm/sec
Pressing speed: 5 to 8 mm/sec
Return speed: 30 to 40 mm/sec
Electric motor power: 5 HP
Weight of the press: 1 to 3 Tons
No. of cylinders: 01 No. Double acting
Capacity : 50 to 500 Tons
Piston size : 200 to 565 mm
Stroke Length: 350 to 700 mm
Day light: 450 to 1000 mm
Shut height: 100 to 300 mm
Table size (L x W): 500 x 500 to 1000 x 1000
Approach speed: 70 to 130 mm/sec
Pressing speed: 10 mm/sec
Return speed: 80 to 140 mm/sec
Electric motor power: 7.5 to 50 HP
Weight of the press: 5 to 16 Tons
No. of cylinders: 1+2 Nos
Working height: 750 mm
T Slots: T16 to T24
Working pressure: 210 bar
Capacity : 5 to 30 Tons
Piston size : 80 to 140 mm
Stroke Length: 300 to 400 mm
Day light: 300 to 400 mm
Table size (L x W): 350 x 300 to 450 x 300
Approach speed: 25 to 30 mm/sec
Pressing speed: 5 to 8 mm/sec
Return speed: 30 to 40 mm/sec
Electric motor power: 3 to 5 HP
Weight of the press: 2 to 5 Tons
No. of cylinders: 1 No. Double acting
Working height: 700 mm
T Slots: T16
Working pressure: 210 bar
Capacity: 30 to 250 Tons
Piston size: 140 to 400 mm
Stroke Length: 300 to 600 mm
Day light: 400 to 600 mm
Shut height: 100 to 150 mm
Table size (L x W): 500 x 350 to 850 x 600
Approach speed: 80 mm/sec
Pressing speed: 10 to 15 mm/sec
Return speed: 80 to 90 mm/sec
Electric motor power: 5 to 25 HP
Weight of the press: 4 to 15 Tons
No. of cylinders: 1+2 Noâ??s
Capacity : 600 to 1500 Tons
Piston size : 450 to 530 mm
Stroke Length: 800 to 1000 mm
Day light: 1100 to 1500 mm
Shut height: 300 to 500 mm
Table size (L x W): 1200 x 1000 to 2000 x 1500
Approach speed: 130 to 200 mm/sec
Pressing speed: 10 mm/sec
Return speed: 140 to 210 mm/sec
Electric motor power: 60 to 100 HP
Weight of the press: 18 to 60 Tons
No. of cylinders: 2+2 No to 3+4 N
Working height: 800 mm
T Slots: T24 to T30
Working pressure: 210 bar
Wide comfort pad to provide lumber support for long working hours.
Fully Adjustable
Two lateral D-Rings for work positioning
Tool holding webbing loops.
Rings for tool holders, Bolt Bags etc.
Conforms to EN 358 : 2000
Standard: Conforms to EN 340
240 gsm - 100% cotton workwear
Color : P. Blue & N. Blue.
Pockets : 2 front pockets (1 with flap &1 with zip), 1 Tool pockets
1 pen pocket
Standards: Conforms to EN 471
Reflective safety jacket
High visibility reflective tape stitched
Fabric type & Net type
Color: Orange / Yellow
Standards : EN 345
Color : Black (Low Ankle) Slipon model
Instep upper : Full grain leather water resistant
Instep Lining : Moisture absorbant textile / High scratch resistant & Anti Bacterial.
Insole : Artificial sole out of fibers / instep leather tongue
Sole : Nitrile Rubber / Steel toe cap / Shock resistant 200j
Compression resistant : 15 KN / Resistant to hydrocarbons / Oil & acid / Abrasion resistant / Anti static
Standards : EN 345
Color : Black (Low Ankle)
Instep upper : Full grain leather water resistant
Instep Lining : Moisture absorbant textile / High scratch resistant & Anti Bacterial.
Insole : Artificial sole out of fibers / instep leather tongue
Sole : Nitrile Rubber / Steel toe cap / Shock resistant 200j
Compression resistant : 15 KN / Resistant to hydrocarbons / Oil & acid / Abrasion resistant / Anti static
Standards : EN 345
Color : Black (Low Ankle) Slipon model
Instep upper : Nubuck leather + Synthetic material
Instep Lining : Moisture absorbant textile / High scratch resistant & Anti Bacterial.
Insole : Artificial sole out of fibers / instep leather tongue
Sole : Double density polyurethane, Directly injected on upper / Steel toe cap / Shock Resistant 200J
Compression resistant : 15 KN / Resistant to hydrocarbons / Oil & acid / Abrasion resistant / Anti static
4.5oz, Made from CXP 93% High Density Viscose
5% Kevlar, 2% p140 Antistatic Fabric Stitched
with 1" Reflective Tape
UL Certified for NFPA 2112 and ASTM 1506
Made of 44mm wide polyester webbing
Length : 1.8 Mtr
Attachments : KARABINER - PN 112 with Energy Absorber PN 300 one end steel scaffold hooks PN 131 at other ends
Conforms to : EN 355 : 2002 + VG 11 / PFE 63 (Additional Static
strength Test)
Made of 44mm wide polyester webbing
Length : 1.8 Mtr
Attachments : KARABINER - PN 112 with Energy Absorber PN 300 one
end steel scaffold hooks PN 131 at other ends
Conforms to : EN 355 : 2002 + VG 11 / PFE 63 (Additional Static
strength Test)
Equipped with advanced dual load advantage (DLA)
Gear system within to give an effortless use of the winch.
Incorporated with bolting fixture for robust fitting on the Tripod
Having lifting load capacity of 135 kgs.
Provided with galvanized steel cable 5.0mm dia & length 20m.
Equipped with steel screw locking Karabiner (PN 112) as connector on the termination end. Conforms to EN 1496 : 2006 (Class A)
To be used with Retractable fall arrester when deployed for raising or lowering a person. Conforms to EN 1496 CLASS B
Model : SL 15100
Energy absorbing webbing lanyard
Made of 30mm wide webbing
Length : 1.8mm
Karabiner with energy absorber at one end and steel scaffol at other end
Conforms to EN 355 : 2002 + VG 11 / PFE 63
Standard: Conforms to EN 470, EN 531
260 gsm - 100% cotton FR workwear Navy Blue Color, 2 White
1" Reflective tape (2 Lines) on the hand, Chest & Legs Sleeve
Pockets : 2 pockets with flap & button on the chest, 1 tool pocket
2 Back pockets, 2 Side pockets, 1 Pen pocket
Standards : EN 149 : 2001
Comfort Fold flat Style
Adjustive Textile Elastic head bands Nose clip to Desired fit / Light
weight / One way exhalation vent valves / with FR Mater
Specially for Welding jobs
Standards : EN 166 & Meets ANSI Z 87.1
Lens : Polycarbonate
Frame : Nylon
Wrap around angleside protection
Universal nose bridge, Adjustive temple
Frame : Black / Blue ; Lense : Clear / Dark
Hard coated lense as standard
Standards : EN 166 & Meets ANSI Z 87.1
Wrap around Angleside protection
180 Degree Eye protection
Universal nose bridge
Adjustive temple, Anti slip nose pad
Frame : Black ; Lense : Clear / Dark
Hard coated lense as standard
Standards : EN 166:2001 & ANSI Z 87.1
Wrap around Angleside protection
180 Degree Eye protection
Universal nose bridge, Anti slip nose pad
Black Frame / Indoor - Outdoor lense
Hard coated lense as standard
Standards : EN 166 & Meets ANSI Z 87.1
Wrap around Angleside protection
Frame : Black ; Lense : Clear / Dark
Universal nose bridge
Anti slip nose pad, Light weight
Hard coated lense as standard
Standards : EN 149 : 2001
Premium 3 Pnel Cup style, Large Surface area
Broad Textile elastic with front pull adjustive buckle
Nose clip to desire fit light weight one way exhalation vent
valve full seal for secure comfortable self fit
Half face mask withsoft non Allergenic
TPE Material, CE Approved
Soft Adjustable Strap to ensure perfect fit, Sweat port
Conforms to EN 140 : 1999
Standards : EN 136 : 1998 Class 3* Protection
Silicone face seal for greater comfort and seal integrity
Low level viewing area for optimum visibility
Adjustable, robust neck strap
Quick release 5 point head harness for maximum security
Designed for easy servicing and cleaning
Modern, rugged and strong construction
Polycarbonate scratch resistant and solvent proof visor, offering
good impact resistance
One size fits all Optional frame for mounting of personal prescription spectacles
Fully compatible with old kit codes.
*all the features of class 2 but with increased resistant to thermal
Model : FV 242
Polycarbonate Lens
8" X 12" width & Aluminum Beeding
Model : FV 252
Polycarbonate Lens
8" X 12" width & Aluminum Beeding
Model : VB3
Spring type bracket which can be fixed with any model helmets
Work for faceshield model # 242, 257, 252
Model : VH 61
Head Gear with rachet to fixface
sheild of model # 242, 257, 252
Seamless
UNS No 2200 : 1/4" to 12"
UNS No 2201 : 1/4" to 12"
UNS No 4400 : 1/2" to 12"
UNS No 6022 : 1/2" to 12"
UNS No 6600 : 1/2" to 12"
UNS No 6625 : 1/2"to 12"
UNS No 8800 :- 1/2" to 12"
UNS No 8020 : 1/2" to 12"
UNS No 8825 : 1/2" to 12"
UNS No 8810 , 8811 : 1/2" to 12"
UNS No 8904 , 8925 : 1/2" to 12"
UNS No 10276 : 1/2" to 12"
In schedule 10S/40S/80S/XXS
Welded
UNS No 2200 : 1/2" to 28"
UNS No 2201 : 1/2" to 30"
UNS No 4400 : 1/2" to 28"
UNS No 6022 : 1/2"to 30"
UNS No 6600 : 1/2" to 30"
UNS No 6625 : 1/2"to 30"
UNS No 8800 : 1/2" TO 30"
UNS No 8020 : 1/2" to 30"
UNS No 8825 : 1/2" to 30"
UNS No 8810 , 8811 : 1/2" to 30"
UNS No 8904 , 8925 : 1/2" to 30"
UNS No10276 : 1/2" to 28
In schedule 10s/40s/80s/XXS
BUTTWELD FITTINGS ASTM A234 / WPC
1/2" TO 24" SCHEDULE 20/30/STD\ XS/80/120/160/XXS
ELBOWS L/R 45D & 90D
ELBOWS S/R 45D
TEES EQUAL & REDUCING
REDUCER CONCENTRIC & ECCENTRIC
CAPS
PIGGEBLE BENDS OF 3D, 5D, 6D, 7D, 10D RADIUS
PIPE ASTM A106 Gr. A/B/C, A53 Gr. A/B/C.
SEAMLESS 1/2" TO 24"
SCHEDULE 20/30/STD/XS/80/120/160/XXS
PRESSURE FITTINGS ASTM A105
3000#/6000# LB FITTINGS 1/2" TO 2"
ELBOW, TEES, COUPLINGS, BUSHES, HEX NIPPLES,
UNIONS, PLUGS, CAPS & REDUCING INSERTS .
CONCENTRIC & ECCENTRIC SWAGE NIPPLES
PIPE NIPPLES TO ASTM A333-3/6
BRANCH OUTLET FITTINGS 1/2" TO 3"
BUTTWELD, SOCKET WELD, THREADED (NPT/BSP)
FLANGES ASTM A105
ANSI CLASS 150#/300#/600#/900#/1500#/2500#
WELD NECK, SLIP ON, SOCKET WELD, BLIND,
THREADED, RF & RTJ
150#/300#/600# 1/2" TO 24"
900# /1500# 1/2" TO 12"
2500# 1/2" TO 6"
SPADE, SPECTACLE, SPACER
FLANGOLET, WELDO FLANGE, NIPPOFLANGE
F304/L, 316/L , 321/H,316H, 321 ,
321H,347/H, 316Ti
CLASS 150# BSP
ELBOWS 45D & 90D
STREET ELBOWS
SOCKET FULL & REDUCING
TOE WELDING & TBE BARREL NIPPLES
TEES, REDUCING BUSHES, HEX NIPPLES,
UNIONS, HEX PLUGS, CAPS, CROSSES,
HOSE NIPPLES, HEX NUTS, ETC .
Double Compression Tube Fittings
Instrument Pipe Fittings
Needle Valve
Ball Valve
Manifold Valve
Accessories
ROUND BAR
ASTM - A36 OR IS: 2062 GR. BR
20 dia rung bar
PIPE API 5L GR A, B, X42, X46, X52, X60, X65, X70
SEAMLESS & WELDED �½" TO 24"
SCHEDULE 20/30/STD/XS/80/120/160/XXS
FLANGES ASTM ASTM A694 Gr. F42, F46, F50, F52, F56,F60, F65, F70
ANSI CLASS 150#/300#/600#/900#/1500#/2500#
WELD NECK, SLIP ON, SOCKET WELD, BLIND, RF & RTJ.
SPECTACLE BLINDS, SPACERS
150#/300#/600# 1/2" TO 24"
900# /1500# 1/2" TO 12"
2500# 1/2" TO 6"
SPADE, SPACER & SPECTACLE.
FLANGOLET, NIPPOFLANGE, WELDOFLANGE.
ASTM A 860 WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65, WPHY 70
1/2" TO 24" SCHEDULE 20/30/STD/XS/80/120/160/XXS
ELBOWS L/R 45D & 90D
ELBOWS S/R 45D
TEES EQUAL & REDUCING
REDUCER CONCENTRIC & ECCENTRIC
CAPS
PIGGABLE BENDS OF 3D, 5D, 6D, 7D, 10D RADIUS.
3000#/6000# LB FITTINGS 1/2" TO 2"
ELBOW, TEES, COUPLINGS, BUSHES, HEX
NIPPLES, UNIONS, PLUGS, CAPS & REDUCING INSERTS.
CONCENTRIC & ECCENTRIC SWAGE NIPPLES
PIPE NIPPLES
BRANCH OUTLET FITTINGS 1/2" TO 3"
BUTTWELD, SOCKET WELD, THREADED (NPT / BSP)
Attachement Elements - A Dorsal attachment D - Ring for fall arrest
Adaptability - Adjustable thigh-straps;
Chest - Strap
Convenience -Shoulder and thigh-straps differentiated by a dual color scheme
Ergonomics - Ideally positioned sit-strap for extended comfort
Compliance - Conforms to EN 361 : 2002
Ref No. PN 2000 A
PN 112 as a attachment element
Gravity locking to prevent incorrect use
Double security opening
Conforms to EN 353 - 2:2002
Ref No. PN 2008 B
Steel karabiner PN 112 as attachment element
Gravity locking to prevent incorrect use
Double security opening
Energy absorber PN 300 and steel Karabiner
Conforms to EN 353 - 2:2002
SUPER DUPLEX STAINLESS STEEL FLANGES
ANSI CLASS 150#/300#/600#
WELD NECK, SLIP ON, BLIND
150# 1/2" TO 12"
300# 1/2" TO 10"
600# 1/2" TO 6", SW , THREADED, SWRTJ, WHRTJ
SPADE, SPACERS, & SPECTACLES
FLANGOLET, NIPPOFLANGE & WELDO FLANGE
SUPER DUPLEX STAINLESS STEEL PRESSURE FITTINGS
BRANCH FITTINGS, SOCKOLET, WELDOLET,
NIPPOLET, ELBOLET, LATROLET
SWAGE NIPPLES
3000# RATINGS
SOCKET WELD & THREADED FITTINGS
F304/L, 316/L , 321/H,316H, 321 , 321H,347/H, 316Ti
TABLES D, E & H
SLIP ON PIPE BORE, THREADED BSP & BLIND
1/2" TO 24"
AS2129 DIMENSIONS
FULLY MACHINED BOTH SIDES
F304/L, 316/L , 321/H,316H, 321 , 321H,347/H, 316Ti
ANSI CLASS 150#/300#/600#/900#/1500#/2500#
WELD NECK, SLIP ON, SOCKET WELD, THREADED & BLIND
150#/300# 1/2" TO 24"
600# 1/2" TO 12"
900#/1500#/2500# 1/2" TO 12"
SPECTACLE BLINDS, SPADE, SPACERS ETC TO ORDER
FLANGOLET, NIPPO FLANGE WELDO FLANGE
Seamless
TP304/L 1/4" TO 16"
TP316/L 1/4" TO 16"
TP321/H 1/4" TO 16"
TP304H 1/4" TO 16"
TP347/H 1/4" TO 16"
TP310S/H 1/4" TO 16"
TP309S/H 1/4" TO 16"
TP317/L 1/4" TO 16" SCHEDULE
10S/40S/80S/160/XXS
Welded
TP304/L 1/2" TO 52"
TP316/L 1/2" TO 52"
TP347/H 1/2" TO 52"
TP410 1/2" TO 52"
TP 321 /H 1/2" TO 52â??
SCHEDULE 10S/40S/80S/XS
Seamless
TP304/L 1/4" TO 16"
TP316/L 1/4" TO 16"
TP321/H 1/4" TO 16"
TP304H 1/4" TO 16"
TP347/H 1/4" TO 16"
TP310S/H 1/4" TO 16"
TP309S/H 1/4" TO 16"
TP317/L 1/4" TO 16" SCHEDULE
10S/40S/80S/160/XXS
Welded
TP304/L 1/2" TO 52"
TP316/L 1/2" TO 52"
TP347/H 1/2" TO 52"
TP410 1/2" TO 52"
TP 321 /H 1/2" TO 52â??
SCHEDULE 10S/40S/80S/XS
ELBOWS L/R 45D & 90D
ELBOWS S/R 45D
TEES EQUAL & REDUCING
REDUCER CONCENTRIC & ECCENTRIC CAPS
STUB ENDS
PIGGEBLE BENDS OF 3D, 5D, 6D, 7D, 10D, RADIUS
SUPER DUPLEX STAINLESS STEEL PIPE
SEAMLESS 1/4" TO 16"
SCHEDULE 10S/40S/80S/160/XXS
WELDED 6" TO 28"
SCHEDULE 10S/40S/80S
SUPER DUPLEX STAINLESS
STEEL BUTTWELD FITTINGS
SEAMLESS 1/2" TO 16"
WELDED 6" TO 28"
ELBOWS L/R & S/R 45D & 90D
TEES EQUAL
REDUCER CONCENTRIC, ECCENTRIC
PIGGEBLE BENDS OF 3D, 5D, 6D, 7D, 10D,
RADIUS SCHEDULE 10S/40S/80S/160/XXS
F304/L, 316/L , 321/H,316H, 321, 321H,347/H, 317L
3000# & 6000# RATINGS
SOCKET WELD 1/2" TO 4"
THREADED NPT & BSP 1/8" TO 3"
ELBOWS 45D & 90D, TEE, RED COUPLING
TEES EQUAL & REDUCING
COUPLING FULL, HALF & REDUCING
REDUCING BUSHES
HEX NIPPLES EQUAL & REDUCING
UNIONS, HEX PLUGS & CAPS
REDUCING INSERTS
PIPE NIPPLES
CONCENTRIC & ECCENTRIC SWAGE
NIPPLES 1/2" TO 6
F304/L, 316/L, 321/H, 316H, 321, 321H, 347/H
3000# , 6000# & 9000# RATINGS
SOCKOLET 1/2" TO 4"
THREADOLET NPT & BSP 1/4" TO 12"
ELBOWOLET/LATROLET 1/2" TO 12"
WELDOLET 1/2" TO 12"
NIPOLET 1/2" TO 6"
DUPLEX STAINLESS STEEL PIPE
SEAMLESS 1/4" TO 12"
SCHEDULE 10S/40S/80S/100/120/160/XXS
WELDED 1/4" TO 30"
SCHEDULE 10S/40S/80S/100/120/140/160
DUPLEX STAINLESS STEEL BUTTWELD FITTINGS
SEAMLESS 1/4" TO 12"
WELDED 6" TO 28"
ELBOWS L/R & S/R 45D & 90D
TEES EQUAL & REDUCING
REDUCER CONCENTRIC & ECCENTRIC
CAPS
PIGGEBLE BENDS OF 3D, 5D, 6D, 7D, 10D R
SCHEDULE 10S/40S/80S/120/160/XXS
DUPLEX STAINLESS STEEL PRESSURE FITTINGS
BRANCH FITTINGS, WELDOLET, NEPPOLET, LATROLET, SOCKOLET
3000# & 6000# RATINGS
SOCKET WELD & THREADED FITTINGS
CONCENTRIC & ECCENTRIC SWAGE NIPPLES
DUPLEX STAINLESS STEEL FLANGES
ANSI CLASS 150#/300#/600#/900#/1500#/2500#
WELD NECK, SLIP ON, SOCKET WELD, THREADED & BLIND, RF, & RTJ FLANGES
150# 1/2" TO 24"
300# 1/2" TO 12"
600# 1/2" TO 12"
900#/1500#/2500# 1/2" TO 10"
SPECTACLE BLINDS, SPADE, SPACERS ETC TO ORDER
FLANGOLET, WELDO FLANGE, NIPPOFLANGE.
H-194X150X6X9/ H-250X250X9X14 / H-350X350X12X9
HEA-100 /HEA-200 / HEA-300
HEB-100 /HEB-200 / HEB-300
W4X13 / W6X25 / W8X21 / W10X17 / W12X26
TUBULAR 48.30 X5.08
TUBULAR 60.30 X 5.54
TUBULAR 114.3X6.02
TUBULAR 114.3x8.56
TUBULAR 1219X25
TUBULAR 168.3X10.97
TUBULAR 219.1hX8.18
TUBULAR 273 x 9.5
TUBULAR 273.3 X 12.7
UB254X146X37
UB356X171X51
UB610x229x113
NPB200X100X25.09
MATERIAL
API 5L Gr-B OR ASTM -A-106 Grade B
API 5L Gr-B OR ASTM -A-106 Grade B
API 5L Gr-B OR ASTM -A-106 Grade B
API 5L Gr-B OR ASTM -A-106 Grade B
ASTM-A572 GR.50 OR ASTM-A31-AH36
PLATE
IS 3502 / ASTM - A36 OR IS: 2062 GR. BR
ASTM - A572 GR. 50 OR ASTM-A131-AH 36 SS 316 L
ASTM - A36 OR IS: 2062 GR. BR
IS 3502 GR .BR OR ASTM-A36
10 THK / 8 THK CHQ PLATE
10 THK PLATE
10 THK PLATE SS
FLAT BAR 50X6 / 100X6
6 THK BENT PLATE
1. Beam
2.Angle
3.Steel gratings galvanized
4. Channel
5.Plates
Ergonomic and comfortable working chair
for vertical Ascent and descent
Tested as per EN 1498
Spreder bar available as optional accessory
WORK MASTER COVER ALL
Standards as per EN 340 : 2003
Material 65/35% Poly cotton fabric
Colors : P. Blue, N. Blue, Khaki, Red, Yellow, White
Green, Orange & S. Gray
Size : Small - 3X1
180gsm
UNIFORMS (2 Piece) Pants & Shirt
Material : 100% Cotton Fabric
210 gsm
Pant & Shirt Full sleeve
Color : Navy Blue / Light BLue
Input Voltage240 V: 240 V
Input Phase: 1 No
Input Frequency: 50 Hz
Output Open Circuit Voltage: 71 V
Welding Current Range: 10- 200Amp
Model : SL 10100
Full body harness
A Dorsal attachment D-Ring for fall arrest
Adjustable thigh-straps, adjustable shoulder straps for wearing comfort. shoulder and thigh-straps differentiated by a dual color scheme. Ideally positioned sit-strap for extended comfort.
Conforms to EN 361 : 2002
