VSI series vertical shaft impact crusher is a new type of sand making and crushing equipment with many national patent technologies, absorbing many years of research and development experience and technical concept, adopting new four port impeller design structure and special sealing structure to prevent oil leakage of bearing barrel, etc., which has the characteristics of energy saving, long service life and wide application, and helps the large sand field gradually move towards large-scale and centralized production. To meet the national requirements for environmental protection and production capacity.
Application: metal and non-metal ores, building materials, artificial sand making, metallurgical slag
Materials: pebble, granite, basalt, iron ore, limestone, calcite, quartzite, diabase, coal, calcium carbide, etc.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
The jaw crusher is of curved extrusion type. When working, the motor drives the belt and pulley to move the movable jaw up and down through the eccentric shaft. When the movable jaw rises, the angle between the elbow plate and the movable jaw becomes larger, so as to push the movable jaw plate to approach the fixed jaw plate. The material can be multi broken through the extrusion, rubbing and grinding between the two jaw plates. When the movable jaw goes down, the angle between the elbow plate and the movable jaw becomes smaller, and the movable jaw plate is under the action of the pull rod and spring. After leaving the fixed jaw plate, the crushed materials are unloaded freely through the discharge port at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the moving jaw performs periodic crushing and discharging to achieve mass production.
According to the lamination theory, the material is broken and polished according to its own texture, forming stable stone particles, falling from the clearance of the broken wall, and the rest materials continue to be broken until reaching To the request.
When the cone crusher is working, the rotation of the motor moves around a fixed direction through the belt pulley or coupling, the transmission shaft and the cone under the force of the eccentric sleeve, so that the crushing wall of the cone crusher sometimes approaches and sometimes leaves the surface of the white rolling wall installed on the adjusting sleeve, so that the ore is continuously impacted, squeezed and bent in the crushing cavity to achieve the crushing of the ore. Broken. When the non breaking foreign matters pass through the crushing chamber or the machine is overloaded for some reason, the spring safety system can realize the safety, the ore discharge opening is increased, and the foreign matters are discharged from the crushing chamber. If the foreign matter is stuck in the ore discharge opening, the cavity cleaning system can be used to make the ore discharge continue to increase, so that the foreign matter can be removed from the crushing cavity. Under the action of the spring, the discharge port automatically resets and the machine returns to normal operation.
