Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
fiberglass membrane housings Specification
Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
frp filter housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
FRP Membrane Housing Pressure Vessels Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
Winder® FRP precision filter membrane housing is a patent product which adopted the material, technology and structure of FRP membrane housing. It is usually settled before a pressure vessel to wipe out fine particles with turbidity higher than 1 to satisfy the water input requirement in the following procedure.
Specification
Winder® FRP pressure vessel is a patent product which adopted the material, technology and structure of FRP membrane housing. It is usually settled before a pressure vessel to wipe out fine particles with turbidity higher than 1 to satisfy the water input requirement in the following procedure.
Sometimes settled at the end of the entire water system to prevent these small particles enter the finished water and damaging the membranes.
FRP pressure vessel supplier:
Features
Composite construction with high strength
No rusting, anti-oxidation & aging
Reliable operation
easy installation, Reliable Operation
Beautiful configuration
Accessories design optimization
Specification of FRP Precision Filter
Model No. Diameter
(mm) Height
(mm) Connection Feed/Concentrate Port Size Pressure (PSI) Water Flow (T/H)
5E20" 200 780 Side entry DN40/1.5" NPT â?¤ 1.0MPa 5.0
5E30" 200 1034 Side entry DN40/1.5" NPT â?¤ 1.0MPa 7.5
5E40" 200 1288 Side entry DN40/1.5" NPT â?¤ 1.0MPa 10.0
· ice life
Specification
Material: Fiberglass and epoxy.
Type: 5E20", 5E30", 5E40".
Process: Winded.
Color: Original, blue, yellow, fruit green or customized
Package: Use wooden box package or rigid cardboard package
Applications
Winder FRP Precision (Security) filters are widely used for:
Production of drinking & domestic water
Electronics
Printing, dyeing & textile
Alcohol & pharmaceutical filtration
Acid & alkali filtration
Desalination & RO membranes pre-filtration
Winder® frp membrane housing pressure vessels
2.5" End Entry Design
Available in 300 psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 2.5" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder® frp membrane housing pressure vessels
2.5" End Entry Design
Available in 300 psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 2.5" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
fiberglass membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
BSPP/NPT thread available
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
4 Inch End Entry frp pressure vessels R40E300
Rohone ® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi pressure rating only!
Accommodates standard make 4" Membrane Element
Element length: 40" x (1-4)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ISO9001, ISO14001, UL/NSF
4 Inch End Entry frp pressure vessels Specification
Rohone ® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi pressure rating only!
Accommodates standard make 4" Membrane Element
Element length: 40" x (1-4)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ISO9001, ISO14001, UL/NSF
4 Inch End Entry frp ro membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME un-coded economy series for saving low pressure ro system cost
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 3-4 times of its operating pressure (wall thickness thinner for saving cost)
? 100% QA test with 1.1x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
4 Inch End Entry frp membrane housings Applications:
Rohone ® FRP membrane housing pressure vessels are widely used for low pressure 300Psi ro systems in industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
0.6MPA FRP TANKS (30 to 63 INCH) FOR INDUSTRIAL USE
FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series
FOR INDUSTRIAL: 30" to 63"
FRP Water Softening, Filter Tanks-Economy 100PSI-Rohone&Aowy Series
FOR INDUSTRIAL: 30" to 63"
HEBEI CHENGDA HUAMO(HBCDHM in short) manufactures FRP tanks with design pressure 1.0Mpa(150Psi), 0.6Mpa(approx 100Psi) to meet various needs of the users.
Structure and Materials of FRP Tanks
Liner material: Rotation molding or Blowing One-piece seamless PE liner
Outer Winding: High performance Epoxy resin + Fiberglass three-dimensional winding reinforcement.
Opening: 2.5" and 4" reinforced plastic thread; 6" alloy flange.
Base Materials: FRP or reinforced PP
ASME Certification frp tanks Application Conditions
Working Pressure: 150 psi(10.5 bar) for Winder series
0.6Mpa for Rohone and Aowy economy series.
Working Temperature: 1 C - 49 C (34F - 120F)
Max. Vacuum: 127mmHg
Lowest Environment Temperature:-27 C (-17F)
Strict Quality Control(Q/A)
Fatigue test: 250, 000 times. (standard 100, 000 times)
Burst test: 4 times of its design pressure.
Certification: NSF & ACS, ASME
Model: 0517-8079.
Rohone and Aowy FRP tank also is Chengda brand: 100 Psi. (Chengda is the FRP RO membrane housing and FRP tanks production base for Frotec - the largest water treatment trading company in China. AOWY brand only for Frotec.)
Specification of frp tanks
No. Model Nominal dimension Opening Volume Base Dimension
Top Bottom litre Gallon A (mm) B (mm) C (mm) D (mm)
1 06Ã??17 150*450 2.5"-8NPSM / 6.7 1.8 Standard 437 161 / 55
2 0635 150*890 2.5"-8NPSM / 15 4.0 Standard 896 61 / 155
3 0713 180*330 2.5"-8NPSM / 6.3 1.7 Standard 335 188 / 180
4 0717 180*432 2.5"-8NPSM / 8.6 2.3 Standard 437 188 / 180
8 0735 180*890 2.5"-8NPSM / 20.1 5.3 Standard 895 �¦188 / 180
9 07Ã??44 180*1110 2.5"-8NPSM / 24.5 6.5 Standard 1125 188 / 180
10 0813 200*330 2.5"-8NPSM / 8.5 2.2 Standard 335 216 / 207
FEATURE
Chengda Winder, Rohone, and Aowy FRP softner tanks quality assurance: burst test with 4 times of its design pressure, and 250000 times cycle test.
1.HBCDHM FRP tanks (844-1665) use 600 TEX fiberglass, not 1200TEX fiberglass, with higher safety factor.
2.The base of HBCDHM FRP tank is made from pure raw material not recycled material, With better appearance, stronger toughness, and more environmentally friendly.
3.Key additives are imported from the US.
APPLICATION
HBCDHM FRP tanks are widely l used for water softening equipment in food processing plants, hospitals, laundries, manufacturing plants, office campuses and restaurants, condominiums, boiler feedwater, car washes, institutions, municipal, multimedia filters, carbon filters, iron filters, calcite filters and specialty media filters
Winder® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
4 Inch Side Entry frp pressure vessels Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
BSPP/NPT thread available
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
frp membrane housings Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
4 Inch Side Entry frp ro membrane housings W40S450
Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
4 INCH frp filter housings Specification
Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
4 Inch Side Entry frp filter housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
4 Inch Side Entry frp pressure vessels Notice:
Please operate in accordance with User Guide!
All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
FRP MEMBRANE HOUSINGS R80S300 - ALUMINIUM CAP
Side Entry Design
Available in 300-600 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
FRP MEMBRANE HOUSINGS Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ISO9001, ISO14001, UL/NSF
Rohone aluminium cap frp membrane housing pressure vessels
8 INCH frp membrane housing price
Side Entry Design
Available in 300-600 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ISO9001, ISO14001, UL/NSF
8 INCH frp membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME un-Coded economy series or saving ro systems cost
Winder® FRP tubular membrane housings(pressure vessels)
End Entry Design
Available in 150 psi pressure rating
Suitable to hold 1pc 8" membrane housing(20"/40"/60" Length)
Specification
Winder® FRP tubular membrane housings(pressure vessels)
End Entry Design
Available in 150 psi pressure rating
Suitable to hold 1pc 8" membrane housing(20"/40"/60" Length)
Key Features
Operating Temp Range: -10°C ---49°C
Test pressure: 1.5x Design Pressure
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Please operate in accordance with User Guide of the FRP tubular membrane housings(pressure vessels)
Frp Precision Filter Housing ADVANTAGES
Winder® FRP tubular membrane housings(pressure vessels) has advantages as follows:
â?¢Mirror finish of inner wall surface
â?¢Anti-corrosion, anti-oxidation & aging
â?¢Uneasy to damage the membrane column element
â?¢High compressive strength
â?¢Excellent anti-pollution performance
â?¢Easy to assemble, long service life
SPECIFICATION
Material Fiberglass and epoxy.
Process Fiberglass winding
Pressure Rate (Bar) 150PSI
Available height 20", 40" 60"
Operating temperature -7 °C49 °C.
Color white or customized
Certificate ASME, ISO9001, ISO14001
FRP pressure vessel APPLICATION
Winder® FRP tubular membrane housings(pressure vessels) are widely used in water treatment systems as follows:
Pre-treatment treatment of:
Garbage, Hospitals, family planning centers
Health & epidemic prevention station
Industrial zone, incineration plant
landfill leachate treatment plants
Living& food waste treatment plants
Waste water treatment produced by:
Coking, oil, gas, coal, chemical
Purification, desalination, recycling separation of mobile water
Industrial water & wastewater applications for reclamation and reuse.
Recovery of Acid, alkali & precious metals
FRP MEMBRANE HOUSINGS W80S1800
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 1800 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40 x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder frp membrane housing pressure vessels
industrial frp membrane housings Side Entry Design
Available in 1800 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40 x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
8 INCH frp filter housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Winder frp membrane housing pressure vessels
End Entry Design
Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating
Accommodates standard make 8" Membrane Element
8 Inch Side Entry frp filter housings Specification
Winder frp membrane housing pressure vessels
End Entry Design
Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating
Accommodates standard make 8" Membrane Element
8 Inch End Entry frp pressure vessels Key Features
Operating Temp Range: -10°C ---49°C
Test pressure
Standard: 1.5x Design Pressure
ASME: 1.1x Design Pressure
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Please operate in accordance with User Guide
8 Inch End Entry frp filter housings Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
Applications:
Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
frp filter housings Notice:
Please operate in accordance with User Guide!
All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Rohone® frp membrane housing pressure vessels
End Entry Design
Available in 450psi, 600psipressure rating
Accommodates standard make 8" Membrane Element
Specification
Rohone® frp membrane housing pressure vessels
8 Inch End Entry frp filter housings Design
Available in 450psi, 600psipressure rating
Accommodates standard make 8" Membrane Element
industrial frp membrane housings Key Features
Operating Temp Range: -10°C ---49°C
Test pressure
Standard: 1.3x Design Pressure
ASME: 1.1x Design Pressure
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Please operate in accordance with User Guide
Winder® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder® frp membrane housing pressure vessels
4" End Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
4 Inch End Entry frp pressure vessels Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
BSPP/NPT thread available
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
W80S300/450 FRP MEMBRANE HOUSINGS
Winder frp membrane housings-2019 design
Hydrostatic Water Leakage Test-1.4 Times of Operation Pressure
Low pressure frp membrane housing-Winder series with similar structure
Available in 150,300.450 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Winder frp membrane housing pressure vessels
Low pressure frp membrane housing-Winder series with similar structure
Available in 150,300.450 psi pressure rating
Hydrostatic Water Leakage Test-1.4times of operation pressure
Model:W80S1000-5(3" side portÃ??4 ports)
Side Entry Design
Available in 300 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Key Features:
Operating Temp Range: -10�°C ---49�°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 â?? 11
Cleaning pH Range: 2 â?? 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Differences of mebrane housings Winder 2012,2019, Rohone aluminium cap and ABS cap design:
Quality Assurance
Hydro-static Leakage Test Pressure:
industrial frp membrane housings Standard:
100% test, not sampling
Ã?? 100,000 times cycle test
Ã?? Burst test with 6 times of its operating pressure
Ã?? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
Ã?? 100% QA inspection and cleaning before final
packaging and delivery to customers.
Submitted for NSF standard 61
Winder 2012 Design-Spring Locking Type
Similar structure with Codeline, Wavecyber FRP pressure vessels
Available in 600Psi,1000Psi,1200Psi operation pressure
Ports: side port, end port
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Winder 8" 600-1200PSI FRP MEMBRANE HOUSINGS-2012DESIGN
Similar structure with Codeline, Wavecyber FRP pressure vessels
Side/End Entry Design
Available in 600Psi,1000Psi,1200Psi operation pressure
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Key Features:
Operating Temp Range: -10C ---49C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Quality Assurance
Hydro-static Leakage Test Pressure:
8 INCH frp filter housings Standard:
100% test, not sampling
100,000 times cycle test
Burst test with 6 times of its operating pressure
100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
100% QA inspection and cleaning before final
packaging and delivery to customers.
Submitted for NSF standard 61
Applications:
Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
Notice:
Please operate in accordance with User Guide!
All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Winder Side Entry Design
Available in 450 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Winder frp membrane housing pressure vessels-450Psi
8040 frp membrane housings
Side Entry Design
Available in 450 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
industrial frp membrane housings
Key Features:
Operating Temp Range: -10C ---49C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
Ã?? 100,000 times cycle test
Burst test with 6 times of its operating pressure
100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
100% QA inspection and cleaning before final
packaging and delivery to customers.
Submitted for NSF standard 61
Applications:
Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
Notice:
Please operate in accordance with User Guide!
All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 1000 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Winder frp membrane housing pressure vessels
for sea water desalination, high concentration waste water
Side Entry Design
Available in 1000 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
multiports (side ports, feed ports) available:2", 2.5", 3", please fill the attached ordering chart to clarify the ports position and size!
8 INCH frp filter housings Key Features:
Operating Temp Range: -10�°C ---49�°C
Internal permeate port not to exceed 125PSI (0.88 MPa)
Operating pH Range: 3 â?? 11
Cleaning pH Range: 2 â?? 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
FRP MEMBRANE HOUSINGS R80S450
Side Entry Design
Available in 300-600 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Rohone aluminium cap frp membrane housing pressure vessels
Side Entry Design
Available in 300-600 psi pressure rating
Accommodates standard make 8" Membrane Element
frp membrane housings Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
8 INCH frp membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME un-Coded series for saving cost of ro systems.
Quality Assurance
Hydro-static Leakage Test Pressure:
8 INCH frp filter housings Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 4 times of its operating pressure
? 100% QA test with 1.3x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
8 INCH frp ro membrane housings Applications:
Rohone FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
8 INCH frp membrane housing price
Notice:
Please operate in accordance with User Guide!
All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Side Entry Design
Available in 600 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 600 psi pressure rating
8 INCH frp membrane housings Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
8 INCH frp membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
FRP MEMBRANE HOUSINGS W80S1200
8 INCH frp filter housings
Side Entry Design
Available in 1200 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON,BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 1200 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON,BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
8 INCH frp membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
FRP MEMBRANE HOUSINGS W80S1500
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 1500 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY ,CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder frp membrane housing pressure vessels
Side Entry Design
Available in 1500 psi pressure rating
Accommodates standard make 8" Membrane Element
Element length: 40" x (1-8)
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY ,CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
8 INCH frp membrane housings Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88MPa)
Operating pH Range: 3 11
Cleaning pH Range: 2 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
8 INCH frp membrane housing price
Quality Assurance
Hydro-static Leakage Test Pressure:
Standard:
100% test, not sampling
? 100,000 times cycle test
? Burst test with 6 times of its operating pressure
? 100% QA test with 1.5x design hydraulic pressure.
ASME: 1.1x Design Pressure
? 100% QA inspection and cleaning before final
packaging and delivery to customers.
? Submitted for NSF standard 61
Applications:
Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
4 INCH frp membrane housings W40S300
Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Specification
Winder frp membrane housing pressure vessels
4" Side Entry Design
Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating
Accommodates standard make 4" Membrane Element
Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc.
Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF
Key Features:
Operating Temp Range: -10°C ---49°C
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
Multi-ports option
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Winder frp membrane housing pressure vessels
End Entry Design
Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating
Accommodates standard make 8" Membrane Element
Specification
Winder frp membrane housing pressure vessels
End Entry Design
Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating
Accommodates standard make 8" Membrane Element
8 Inch Side Entry frp membrane housings Key Features
Operating Temp Range: -10°C ---49°C
Test pressure
Standard: 1.5x Design Pressure
ASME: 1.1x Design Pressure
Internal permeate port not to exceed 125PSI(0.88 MPa)
Operating pH Range: 3 - 11
Cleaning pH Range: 2 - 12 (less than 30 minutes)
Mirror inner wall and brightly surface.
White color is as standard. Customized colors are also available.
ASME Code stamp available upon request
Please operate in accordance with User Guide
