PALL Type Big Flow Filter has 1 pc PALL cartridge inside of it.
A. Fully Filter Housing and accessories are made of FRP material( which are finished by SMC method) .Non-corrosive, no leakage and could bear high pressure & high temperature.
B. Filter internal structure design is unique, novelty and reasonable. The lower end is supported by a continuous air. The upper end is provided with the filter bag positioning lock block. The filter bag can be fixed only by rotating it 60 degrees.
C.The customers only need to revolve the filter cartridge then could be fixed because internal structure has its cartridge positioning function. Install and change cartridges without any tools, it also decrease the time of change cartridge.
D.The surface of bag filter adopts the laminating process, which is beautiful, environmentally friendly and color adjustable.
PALL Large flow Filter is also known as precision filter, a pressure filter device, the use of folded forming filter material, under the action of pressure, make the raw liquid through the filter material, filter residue stay on the wall, filter through the filter material outflow, so as to achieve the purpose of filtering. Because of the different filter material, filter aperture is not the same. Precision filtration is a kind of filtration between sand filtration (coarse filtration) and ultrafiltration.
The same form of filter material, according to the external size can be divided into different specifications. The filter material formed by the folding process has a large flux and a maximum working temperature of 60 .Precision filtration can remove suspended matter, some colloids and small particles in water.
PAKE (Precision) Large Flow Filter has 4pcs PAKE 40" Filter cartridges inside. Pressure level: 150 PSI.
A.Fully material of Filter Housing is FRP, other FRP inside accessories are all PAKE(PRECISION) FILTER Has 4pcs (PAKE) 40" filter cartridges. Pressure Level: 150PSInished by SMC method. Non-corrosive, no leakage and could bear high pressure and high temperature.
B Filter internal structure design is unique, novelty and reasonable. The customers only need to revolve. The filter cartridge then could be fixed because internal structure has its cartridge positioning function. You do not need to use any tools for change cartridge , it also decrease the time of change cartridge.
C. NO.2 Filter is opening with SUS 316 suspension-screws, the design of suspension-screws will provide customers more convenient install and unlock and service.
Bag Filter has 1 pc �?180mm bag cartridge inside of it.
A. Fully Filter Housing and accessories are made of FRP material( which are �nished by SMC method) .Non-corrosive, no leakage and could bear high pressure & high temperature.
B. Filter internal structure design is unique, novelty and reasonable. The lower end is supported by a continuous air. The upper end is provided with the �lter bag positioning lock block. The �lter bag can be �xed only by rotating it 60 degrees.
C. The customers only need to revolve the �lter cartridge then could be �xed because internal structure has its cartridge positioning function. Install and change cartridges without any tools, it also decrease the time of change cartridge.
D. The surface of bag fillter adopts the laminating process, which is beautiful, environmentally friendly and color adjustable.
PAKE Type Big Flow Filter has 1 pc 40"PAKE cartridge inside of it.
A. Fully Filter Housing and accessories are made of FRP material( which are finished by SMC method) .Non-corrosive, no leakage and could bear high pressure & high temperature.
B.Filter internal structure design is unique, novelty and reasonable. The lower end is supported by a continuous air. The upper end is provided with the fillter bag positioning lock block. The filter bag can befixed only by rotating it 60 degrees.
C. The customers only need to revolve the filter cartridge then could be fixed because internal structure has its cartridge positioning function. Install and change cartridges without any tools, it also decrease the time of change cartridge.
D.The surface of bag filter adopts the laminating process, which is beautiful, environmentally friendly and color adjustable.
FRP Filter Sets Could be parallel consisted of two or over two sets of FRP Filter Housings. Every Housing has 1pc (PALL) 40" filter Cartridge. Every housing could bear capacity 30T/H, when they work together the capacity will be add upon the parallel quantity. Such as Three Type could bear 90T/H. Keep stability & safety.
A. Fully material of Filter Housing is FRP, other FRP inside accessories are all finished by SMC method. Non-corrosive, no leakage and could bear high pressure and high temperature.
B. Filter internal structure design is unique, novelty and reasonable. The customers only need to revolve
the filter cartridge then could be fixed because internal structure has its cartridge positioning function. You do not need to use any tools for change cartridge , it also decrease the time of change cartridge.
Our PK series of large-flow filter cartridge provide an effective replacement for deep-seated and other 2-1/2 "outer diameter filter cartridge in large-flow situations, such as reverse osmosis (RO)prefiltration.
Each PK series large flow filter element can handle up to 1300L/min, significantly reducing the number of filter cartridge and the size of filter cartridge.
The water treatment capacity of one filter element is equivalent to 10 filter elements with an outer diameter of 2-1/2 "and a length of 40".
PK series filter element adopts unique ABS reinforced inner center support skeleton design and built-in O-ring and handle design. The filter element can be installed quickly, safely and conveniently.
It could longer the using time of service life and reduce the cost based on super high pollution load quarantee.
Easy to install ,decrease both the quantity of changing cartridges and labor costs.
The design of the sealing interface reduces the risk of side flow, thus improving the filtration efficiency
A wide range of chemical applications can be applied in a variety of fields
Microporous folding filter cartridge is made of ultra-fine polypropylene (PP) fiber film and non-woven cloth or (silk screen) folded for the support layer. The shell, center rod and end cover of the filter core are processed and formed by hot-melt welding technology, without any adhesive, non-leakage, and no secondary pollution.
Excellent chemical compatibility, suitable for filtering strong acid, strong alkali and organic solution;
The membrane is folded deep filtration, and the membrane filtration area is large.
Low pressure difference, strong dirt bearing capacity, long service life;
There are a variety of filtering accuracy to choose;
Progressive pore size variation provides ultra high fouling capacity
PP filter element is made of ultrafine polypropylene fiber film, without any cement, no leakage, no secondary pollution.
PP Sediment filter : Polypropylene replacement, cartridge for removal of : Sand, Silt, Dirt and Rust Particles.
For water use only. This cartridge fits most standard in-Line Filter Housing. Maximum Water temperature 52.Micron rating is nominal. Installation and housing design can affect performance. This filter will not remove cysts, bacteria or viruses.
The diameter of our PL Model Large flow cartridge is 6 inches /152mm, no central support frame, one opening, and the direction of flow is from inside to outside. We could also provide both have central and outside support frame type for customers if you have special needs.
It could decrease the using quantity of cartridges and reduce the size of filter housing because of its large dimeter design & increase of getting higher effective filtration area of cartridge.
It could also help reduce the investment and human costs due to its large filtration flow.
Product Characteristics:
Graded aperture structure
The highest flow of one pc cartridge could been reach to 110m/3/H when filter the water, the size of filter system can be reduced by up to 50%.
20 inch/525mm , 40 inch/1016mm, 1524mm length cartridge are available
The flow direction which is from inside to outside could ensure that all impurities are trapped inner of filter cartridge.
Technical specification/component material
Cartridge material: folded deep polypropylene (PP), or melting spray polypropylene
Support /diversion layer: polypropylene
End cover: glass fiber reinforced polypropylene
O-ring sealing material: EPDM, NBR, etc
