Microporous folding filter cartridge is made of ultra-fine polypropylene (PP) fiber film and non-woven cloth or (silk screen) folded for the support layer. The shell, center rod and end cover of the filter core are processed and formed by hot-melt welding technology, without any adhesive, non-leakage, and no secondary pollution.
Excellent chemical compatibility, suitable for filtering strong acid, strong alkali and organic solution;
The membrane is folded deep filtration, and the membrane filtration area is large.
Low pressure difference, strong dirt bearing capacity, long service life;
There are a variety of filtering accuracy to choose;
Progressive pore size variation provides ultra high fouling capacity
Supplier: Filter cartridge, pp filter cartridge (ppf), wire wound filter cartridge (winding filter cartridge), activated carbon filter cartridge (cto udf), microporous folding filter cartridge, high flow filter cartridge, air filter cartridge
The metal microporous filter cartridge processed by stainless steel irregular powder can be isostatically pressed, molded and extruded. It has good permeation filtration performance and high filtration accuracy, as well as certain strength and toughness, and can be used at a high temperature of 600 C. The metal microporous filter cartridge is mainly used in basic industries such as petroleum, chemical industry, and environmental protection as filter materials, porous electrode materials, sound-absorbing materials, shock-absorbing materials, divergent cooling materials, catalysts and catalytic reduction materials, antifreeze and buffer materials. Product Parameters Material: SUS304, 304L, 316, 316L Shape: tube, plate, sheet, disc, ring, rod and cone Filtration accuracy: 0.22um-100um Applicable temperature: 600 Porosity: 30%-40% Thickness: 1.0mm-10mm Length: customized Features 1. High porosity The pore size is uniform, easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, and long service life. 2. High mechanical strength It is easy to install and use, easy to maintain, good in assembly, and can be welded, bonded and machined. Uniform pores, ideal for situations needing high consistency, such as fluid dispersion and homogenization treatment. Good mechanical performance, low pressure difference, large flow rate, pressure filtration and suction filtration, and simple operation. 3. Good molding process The total unwelded length is up to 1200 mm. Stainless steel powder products are manufactured at one time without cutting, resulting in a high effective utilization rate of raw materials and maximum material savings. It is particularly suited to components with huge batch sizes and complex architectures.
Product Introduction The metal microporous filter cartridge processed by stainless steel irregular powder can be isostatically pressed, molded and extruded. It has good permeation filtration performance and high filtration accuracy, as well as certain strength and toughness, and can be used at a high temperature of 600 C. The metal microporous filter cartridge is mainly used in basic industries such as petroleum, chemical industry, and environmental protection as filter materials, porous electrode materials, sound-absorbing materials, shock-absorbing materials, divergent cooling materials, catalysts and catalytic reduction materials, antifreeze and buffer materials. Product Parameters Material: SUS304, 304L, 316, 316L Shape: tube, plate, sheet, disc, ring, rod and cone Filtration accuracy: 0.22um-100um Applicable temperature: 600 Porosity: 30%-40% Thickness: 1.0mm-10mm Length: customized Features 1. High porosity The pore size is uniform, easy to blow back, can be regenerated online, easy to clean, strong regeneration ability, and long service life. 2. High mechanical strength It is easy to install and use, easy to maintain, good in assembly, and can be welded, bonded and machined. Uniform pores, ideal for situations needing high consistency, such as fluid dispersion and homogenization treatment. Good mechanical performance, low pressure difference, large flow rate, pressure filtration and suction filtration, and simple operation. 3. Good molding process The total unwelded length is up to 1200 mm. Stainless steel powder products are manufactured at one time without cutting, resulting in a high effective utilization rate of raw materials and maximum material savings. It is particularly suited to components with huge batch sizes and complex architectures. Package and Shipment Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation.
Introduction The ARLTS series filter cartridge is made of hydrophobic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. Its main features include strong hydrophobic, high retention rate, excellent chemical resistance and thermal stability. It maintains effective filtration effect for corrosive solvents and strong oxidizing liquids. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophobic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Chemical industry: Terminal filtration for organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Terminal filtration for clarification of liquor, beverages, wines, fruit wines, removal of microorganisms and fine particles, etc. Gas Industry: Gas filtration, sterile storage tank respirator, air fermentation tanks, etc.
Introduction The ARLTQ series filter cartridge is made of hydrophilic PTFE micropore membrane as the filtering medium. It is manufactured by thermally fusing PTFE filter membrane and PP support material, without any adhesives. It is suitable for the chemical and pharmaceutical industry with strict requirements. Its main features include stable hydrophilic, high retention rate, excellent chemical resistance and thermal stability. It does not require pre-wetting when filtering solvents with high water content. The double-layer membranes formula can better improve the filtration efficiency. Its biological safety and endotoxin indexes meet FDA requirements and Chinese Pharmacopoeia standards. All products have passed integrity tests of the instrument. Specification Filter material: Hydrophilic PTFE micropore filter membrane (single/double layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 3 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Pharmaceutical Industry: Sterile active pharmaceutical ingredients, sterilization filtration of pharmaceutical liquids, etc. Chemical Industry: Filtration of hydrophilic organic solvents, inorganic solvents, chemical reagents, etc. Food Industry: Filtration of alcohol, beverage, etc.
Introduction The ARLE series micropore filter cartridge is made of PES micropore membrane as the filtration medium. The uniquely shaped and evenly distributed micropores cover more than 85% of the membrane area, ensuring high filtration efficiency and stability. This product exhibits excellent hydrophilic, is free from surfactants, and features efficient antibacterial properties, low adsorption, high mechanical strength, as well as resistance to high temperatures and pressures. It can withstand multiple cycles of steam sterilization. The double-layer filter membrane formula can better improve the filtration effect. All products have passed the integrity test of the instrument. Specification Filter material: PES micropore filter membrane (single / double Layer) Diameter: 69, 83 mm Pore size: 0.1 ~ 1 micron Length: 5" ~ 60" Interface type: 222, 226, 215, 213, DOE Gasket/O-rings: Silicone, EPDM, NBR, Viton, wrapped in PTFE Application Suitable for terminal filtration in pharmaceutical, biological products, microelectronics, semiconductor, chemical and other industries.
OD 6 152.4mm L 40 1016mm 60 1524mm Flow 110m3h 60 Rate 1,3,5,10,30,50,70 Micron. Material PP Glass fiber Replacement PALL Pentair, Aquatec, Eaton, Graver, Mahle, Aqua
PP , Melt blown filter cartridge, 5 micron. ID:1.1(28mm) OD:2.5(63mm) L:10 (254mm)
RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media in between, it removes sediments as well as organic pollution from water. Specification RFC series Radial Flow filter cartridge is made of melt blown inner & outer layer with adsorption media (usually GAC) in between, it removes sediments as well as organic pollution from water. Compare to traditional UDF filter, RFC filter provides higher flow rate and better sediment reduction. Features NSF Certified activated carbon High flow rate Low pressure drop Rapid dechlorination Technical data Maximum temperature
