Application
While primarily designed for Ammonia, this Ammonia Refrigeration controls are also suitable for R-22 and other non-corrosive liquids that have a specific gravity of 0.5 or more. The controller is ideal for the control of the operating level of liquid in liquid refrigerant accumulators and separators. Although this is normally done with a solenoid valve, the controller canactivatean alarm or a pump or similar device.
Construction
Mechanical Float:
Mechanical Float: Lightdeepdrawn body, drawn inone piece. Ball &Stem are made from SS. This device consists of one float chamber with a magnetic operated switch in the top housing. The float chamber consists of a housing, float ball and magnet. The float ball is located inside the housing and moves an attached magnetic stem up or down in an enclosing tube from thetopand is protected by the enclosure. Gravity equalisation of the liquid level lin the float chamber is a function of the liquid. For fluids having a high viscosity the response time will beslower. The level controller should not be used on water applications.
Safe Working Pressure: 300 psi.
AMMONIA EVAPORATIVE CONDENSERS Enquiry Now
We are Pune, India based manufacturers of Ammonia Evaporative Condensers with high quality fans and electric pumps to give hustle free performance. Evaporative condensers are modern technology and space saving equipment when compared to the Traditional Open type Atmospheric Condensers, Shell & Tube Condensers and PHE''s. We design tailor made Evaporative Condensers taking into consideration your requirement, system load, local wet bulb temperatures and working conditions. Our high efficient designed condensers are popular in seafood, ice plants and food processing industries as we offer the flexible capacity and MOC options.
Structures : Stainless Steel SS304 OR Hot Deep Galvanised
Coils : SS304 Coils
Fans and Motors : Imported
Capacity : 25 TR to 500 TR
Advantages Of Liquid Ammonia Pump
1. No Leakage Handles toxic, explosive, expensive, hazardous, fluids without leaking into atmosphere.
2. AIRTIGHT Designed to handle vacuum services or fluids that react to contact with air.
3. NO SHAFT SEAL No mechanical seal. No gland Packing
4. NO EXTERNAL LUBRICATION Pumped fluid provides cooling and lubrication of motor and bearing No lubrication levels to check or maintain.
5. COMPACT DESIGN Motor and pump are single unit-no alignment necessary. No grouting or elaborate foundation
MSVA Ammonia Stop Valves are accessible with Standard neck (MSVA-S) in angle way and straightway variants. Ammonia stop valves are specially designed to meet all modern refrigeration application necessities and favorable flow characteristics. These Ammonia Stop valves are very easy to disassemble and repair when required. The Ammonia stop valve cone is intended to ensure perfect sealing and withstand a high pulsation and vibration, which can be present particularly in the discharge line. The MSVA is furnished with internal back seating support/enabling the shaft seal (packing gland) to be replaced while the Ammonia stop valve is still under working condition.
Highlights
Applicable to R717(Ammonia), R744(CO2), HCFC and HFC.
Also utilized in chemical and petrochemical applications.
Each valve type is clearly mentioned with type, size and operating range.
Quick and simple valve maintenance. It requires less effort to replace the top assembly and no welding is required.
Modular Concept
Each valve body is available with a number of different sizes and connection types.
Possible to transform/convert MSVA-S into any other product of MSVL family (stop/check valves, regulating valve and strainer) by replacing the entire top part.
Optional accessories:
For frequent operation heavy duty hand wheel can be supplied.
For infrequent operation seal Cap can be supplied
Available in angleway and straightway forms with Standard neck.
The valves and seal caps are prepared for sealing, to avoid operation by unauthorised person, utilizing a seal wire.
Internal back seating:
Internal metal backseating: -DN 15 - 65 (�½ - 2�½ in.).
Internal TEFLON backseating: DN 80 - 200 (3-8 in.).
Can be used for flow in both directions.
Valve body and bonnet material is low temperature steel as per PED norms.
Maximum working pressure: - 754 psi g (52 bar g).
Operating temperature range: - 60 to +150C ( 76 to 302F).
Type SA5 solenoid valves in refrigeration sysytem is the direct acting type & type SA 17, SA 32, SA 42, SA 50 are higher capacity pilot operated Ammonia solenoid valves in refrigeration system & air conditioning applications.
SPECIFICATIONS :
Refrigerants : R717 (NH3), R22, R134A etc.
Temperature of medium -40 C to + 80C
Single coil (type KC -3) for all SA series valves.
AVAILABLE IN SIZES:
15 mm / 20 mm / 25 mm / 32 mm / 40 mm and 50 mm
REFLEX GLASS LIQUID LEVEL INDICATOR Enquiry Now
Liquid level indicators are equipped with boron silicate glass, hardened by an accurately controlled heat treatment process. These level indicators are used to display the level of ammonia gas in the system. The liquid level indicators are installed with stop valves equipped with handwheels The liquid chamber is a one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid whereas the light striking the glass in the vapour portion is reflected, making the liquid appear black. Sizes: 12", 18", 24", 30" 36", 42" 48", 54", 60".
Gives safe and positive visual indication of liquid level in vessel under high pressure and temperature conditions.
Suitable for R717 (Ammonia), HCFC & HFC.
In case of glass break, the balls inside the valve stop the refrigeration flow immediately.
Tempered boron silicate glass resistant to chemical, thermal and mechanical shocks.
Safe working pressure: 400 psig (27 bar).
Large chambers for boiling, flashing and surging liquids.
Technical Data
Introduction
Refrigerants
Shut off valves are applicable to all common non-flammable refrigerants including R717 and non-corrosive gases/liquids dependent on sealing material compatibility. For further information please see installation instruction for CSVA. These Shut off Valves are used in the Industrial Refrigeration system.
Temperature range
Standard version : - 46/+150�°C
Pressure range
shut off valves are designed for max, working pressure CSVA-2 DN-15 to DN-40 : 25 bar (362 psig) CSVA-4 DN 15 to DN 200:40 bar (580 psig)
Features
Housing
Made of special, cold resistant steel.
Valve cone
Shut off valves cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed.
Spindle
Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged.
Sealing
Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.
Design
Housing
Made of special, cold resistant steel.
Connections
Available with the following connections: - Butt-weld ANSI DN15-40(B 36.10 Schedule 80) Butt-weld ANSI DN 50(B 36.10 Schedule 40) Butt-weld ANSI Socket weld (ANSI B 16.11) - DN 15 - 40 % -1% in.).
Valve Cone
Spindle
Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged.
Sealing
Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.
We specialize in Vilter make supplied Refrigeration Compressor Spare Parts to suit :
XL 450 Series :
XL 452, XL 454, XL 456, XL 458 Compressors.
XL 440 Series sapre parts also available ready stock.
A reliable source & adequate storage of compressor pistons of Atlas Copco, Bitzer, Bock, Carrier / Carlyle, Daikin, Elgi, Gea grasso, Ingersoll Rand, Kirloskar, Mycom, Sabroe, Trane & York compressor. We are known for providing a qualitative array of compressor pistons and thus our entire range is strictly checked against varied quality parameters. We are offering a full-fledged diversified entire range of Vilter Compressor spare parts for Marine refrigeration, Natural gas & air power industries of world renowned brands as under -
Carrier / Carlyle - 5H/F, 06C, D & 6E-Series Transicold Container
Grasso / Kirloskar - AC/PC/KC/RC/TC-Series/EH/T-BTD-MM/JM
Ingersollrand - Type30, ESV-LUB /Nonlub/ IHE/HSE/CY-N
Copeland - 2CK-56, 2CK-38, 4CC-75, 6CC-75, DWM, DLEE-Serie
Atlas Copco - VT & GA Series
Accel Sabroe (CMO) - TSMC/CMO/BFO/SBO - Series
Daikin/batliboi - HC Series
Bitzer - 4 & 6 - Series
Alfa Laval - P & U Series LD series
Utility Trane - E & F Series
Bock - FX2/3/4/5/16
Available in :
Air Cooled and Water Cooled ( Water cooled subject to availability )
Accessories:
Drive Set
-â??Vâ?? Belt drives. (Fly wheel, Motor pulley). Belts. for a wide range of standard speeds.
- Direct drive. (Flexible coupling)
Base frame, Slide rails for motor with foundation bolts.
Stop valves (shut-off) for suction & discharge lines.
Electrically operated solenoid valves for capacity control.
Pressure gauges & Safety pressure cutouts, Crankcase heater & Oil separator.
We are offering Grasso Compressor Spare parts. We are known for offering best quality of Grasso Compressor spare parts
RC 11 Series :
RC 211, RC 311, RC 2111, RC 411, RC 3111, RC 511, RC 611, RC 4211, RC 5111, RC 911, RC 6311, RC 7211, RC 1211, RC 8411, RC 9311, RC 10211
RC 12 Series :
RC 212, RC 312, RC 2112, RC 412, RC 3112, RC 512, RC 612, RC 4212, RC 5112, RC 912, RC 6312, RC 7212, RC 1212, RC 8412, RC 9312, RC 10212
Also deal in RC9, RC10 Series and K110 Series Compressor Spare Parts Etc.
We are India''s largest stockiest and suppliers for kirloskar Ammonia compressor spare parts and accessories required for Kirloskar make refrigeration compressors. This spares are 100% genuine and sourced from the OEM vendors. kirloskar Ammonia compressor spare parts are available for below models available ready stock.
KC Series Compressors:
Model Nos :
Single Stage KC2, KC3, KC4, KC6, KC9 and KC12 Two Stage KC21, KC 31, KC 42, KC 51, KC72, KC63, KC93, KC102
KCX Series Compressors:
KCX1, KCX2, KCX3, KCX4, KCX6, KCX9 & KCX12 KCX21, KCX31, KCX42, KCX51, KCX72, KCX63, KCX102, KCX84
Sabroe Compressor Spare Parts Enquiry Now
Approx. Price: Rs 100 / Piece
Product Details:
Minimum Order Quantity 12 Piece
Air Compressor Model SABROE JOHNSON CONTROLS YORK
Usage/Application Refrigeration Compressor
Compressor Type Reciprocating Compressor
Suitable for Compressor Brands :
SABROE SMC TSMC MK4 Series Refrigeration Ammonia and Freon Compressor Spare Parts available ready stock.
Sabroe Compressor spare parts mainly consists of the below series and compressor models. SMC 100 SERIES : SMC400, SMC600, SMC800, SMC1000, SMC1200, SMC1400, SMC1600SMC 65 SERIES : SMC465, SMC665, SMC865 TSMC SERIES
SMC 100 SERIES FOR L, S & E TYPE
CMO1 & CMO2 SERIES
York Bluestar Compressor Spare Parts Enquiry Now
Approx. Price: Rs 100 / Piece
Product Details:
Spare Type Compressor Kit,Compressor Filters,Compressor Cylinder
Compressor Brand York Bluestar
Compressor Type Reciprocating Compressor
Available Material SS, CI
We have complete range of York/Bluestar make Compressor Spare Parts to suit the below models :
J Series:
JS 42E, JS 43E, JS 63E, JS 83E, JS 44E, JS 64E, JS 84E, JS 43F, JS 63F, JS 83F, JS 44F, JS 64F, JS 84F,JS 43, JS 53, JS 73, JS 83 (Style A, B, C, D) JH 43, JH 63, JH 83 (Short Stroke), JL 43, JL 63, JL 83 (Short Stroke), JS 44, JS 54, JS 64, JS 74, JS 84 (Style C & D-Long Stroke), JH 44, JH 64, JH 84 (Long Stroke), JL 44, JL 64, JL 84 (Long Stroke) JZ , JP Series.
PC Series:
PC 43, PC 63, PC 83 (Short Stroke) PC 44, PC 64, PC 84 (Long Stroke)
Mycom Refrigeration Compressor Spare Parts Enquiry Now
Approx. Price: Rs 100 / Piece
Product Details:
Compressor Type Refrigeration Compressor
Compressor Brand Mycom
Spare Type Compressor Kit, Compressor Filters,Compressor Cylinder
Surface Finish Powder Coated
Available Material SS, CI, Copper and Plastic
Mycom refrigeration compressor spare parts are available. 100% interchangeable and OEM replacement parts.
WA Series
WB Series
L Series
K Series
