STANDARD PRODUCT CONFIGURATION & SPEC
304 SS or 316 SS material
Brewhouse: Mash tun + Lauter tun + kettle + Whirlpool tank+HLT
Mash tun + Lauter tun + kettle/ Whirlpool tank+HLT
Mash tun /Lauter tun + kettle/ Whirlpool tank+HLT
Mash tun with bottom stir, VFD, cylinder and bottom jacket, separately control
Lauter tun with bottom stir, VFD, bottom grain out door
Kettle with side and bottom steam jacket, separately controlled
Whirlpool tank: Flat or conical bottom, easy wort outlet
Double/triple sized HLT with steam jacket or coil
Double/triple sized CLT, cooling jacket
Stainless steel working platform with hand rails
Sanitary wort pumps with variable speed control
SS wort grant
Sanitary grade heat exchanger following customers brewing recipe
Cold and hot water mixing unit with flow meter, for mashing in and sparging.
Grain hydrator
Grain transfer system: Flexi auger or piping chain conveyor
Double rollers malt mill, capacity: 500-1000kg/h
Fermenters: Single or double brews, quantity to be defined
Bright beer tanks: Single or double brews, quantity to be defined
Options:
Separate whirlpool tank
Separate sink
Internal heater for boiling tank
Air controlled pneumatic valves
Touch screen, PLC: Siemens S7-1200/S7-300
Steam jacket for mash/lauter tun
Hopgun
Kettle vapor stack condenser
CUSTOMIZATION UPON EXACT REQUEST
Shipment: Could be EXE, CIF or DDU etc.
On site installation possible (when necessary)
STANDARD PRODUCT CONFIGURATION & SPEC
304 SS or 316 SS or copper material
Brewhouse: Mash tun /Lauter tun + kettle/Whirlpool tank+HLT (optional)
Mash/boiling tank + Lauter/ Whirlpool tank+HLT (optional)
Heating method: Steam/electric/gas fired
Mash tun/lauter tun with top stir, VFD, side grain out door
Mash/boiling tank with stir, VFD , side & bottom steam jacket
Electric heater around tank inside or gas chamber underneath
Double size HLT, double steam jacket or coil
Double sized CLT, double/triple cooling jacket
Stainless steel working platform with hand rails, skid proof
Sanitary wort pumps with variable speed control
SS wort grant, visible
Sanitary grade heat exchanger following customers brewing data
Cold and hot water mixing unit with flow meter, for mashing in and sparging.
Double rollers malt mill, capacity: 300-500kg/h
Fermenters: Single or double brews, quantity to be defined
Bright beer tanks: Single or double brews, quantity to be defined
Options:
Touch screen, PLC: Siemens S7-1200
Steam jacket for mash/lauter tun (only for steam heating)
Kettle vapor stack condenser
Low power HLT electric heater for keeping temp
CUSTOMIZATION UPON EXACT REQUEST
Shipment: Could be EXE, CIF or DDU etc.
On site installation possible (when necessary)
STANDARD PRODUCT CONFIGURATION & SPEC
304 SS or 316 SS or copper material
Capacity range: 50-150L
Brewhouse: Mash tun/Lauter tun + kettle/Whirlpool tank
Heating method: electric/gas fired
Mash tun/lauter tun with wedge wire filter plate, side grain out door
Kettle /whirlpool with electric heater around tank inside
Sanitary wort pumps with variable speed control (optional)
Sanitary grade heat exchanger or cooling coil
Fermenters: single or double layers, quantity to be defined
Options:
Platform for brewhouse unit
Plat form for cellar
Stir for mash/latuer tun
CUSTOMIZATION UPON EXACT REQUEST
Shipment: Could be EXE, CIF or DDU etc.
STANDARD PRODUCT CONFIGURATION & SPEC
Tank material: SUS 304 S/S
Volume: 2000L effective , 2800L total volume, 25% head space, without domed head space
Tank working pressure: 2.5bar
Jacket working pressure: 1bar
Inner tank thickness: 3mm, outer cladding: 2mm
Polyurethane insulation, thickness: 100mm, side and bottom insulated
Dimple plate cooling jacket
Cooling stage: cylinder and cone
Since temp control stage
Exterior: stain removed, and brightened on regular margin
Interior surface: Polished, and welding joint acid cleaned
Roughness: 0.4um
Domed top, 60 degree cone angle
4 pcs stainless steel leg, with adjustable leg bolt
Top fittings: CIP arm, spray ball, PVRV
Side fittings: Glycol inlet/outlet, thermo well, sample port, manway (side)
Bottom fittings: Drain valve, beer racking arm, with carbonation stone
CIP arm including pressure gauge and pressure regulator
Mechanical pressure valve mounted with CIP arm
Top dry hopping port
Material inlet/outlet with DIN, glycol line with TC
Fittings quantity:
4* butterfly valves (drain outlet, beer outlet, 2 for CIP arm)
1*sample valve
1* breathe valve on tank top
1*pressure regulation installed with CIP arm
1*CIP arm
1* pressure indicator
1* temp sensor
1* solenoid valves
1* check valve (part of glycol cooling line)
STANDARD PRODUCT CONFIGURATION & SPEC
304 SS or 316 SS or copper material
Brewhouse: Mash tun /Lauter tun + kettle/Whirlpool tank+HLT
Mash tun + Lauter tun + kettle/ Whirlpool tank+HLT
Heating method: Steam/electric/gas fired
Mash tun/lauter tun with bottom stir, VFD, side or bottom grain out door
Kettle with side and bottom steam jacket (only for steam heating)
Optional: Electric heater around tank inside or gas chamber underneath
Whirlpool tank with easy wort outlet
Double/triple sized HLT with steam jacket or coil
Domed or cone top for brewhouse
Double/triple sized CLT, double/triple cooling jacket
Stainless steel working platform with hand rails, skid proof
Sanitary wort pumps with variable speed control
SS wort grant
Sanitary grade heat exchanger following customers brewing recipe
Cold and hot water mixing unit with flow meter, for mashing in and sparging.
Grain hydrator for mash tun
Grain transfer system: Flexi auger or piping chain conveyor
Double rollers malt mill, capacity: 500-800kg/h
Fermenters: Single or double brews, quantity to be defined
Bright beer tanks: Single or double brews, quantity to be defined
Options:
Separate whirlpool tank
Separate sink for sampling & testing
Air controlled pneumatic valves for steam heating
Touch screen, PLC: Siemens S7-1200/S7-300
Steam jacket for mash/lauter tun
Hopgun
Kettle vapor stack condenser
Low power HLT electric heater for keeping temp
CUSTOMIZATION UPON EXACT REQUEST
Shipment: Could be EXE, CIF or DDU etc.
On site installation possible (when necessary)
STANDARD PRODUCT CONFIGURATION & SPEC
304 SS or 316 SS material
Brewhouse: Mash tun + Lauter tun + kettle + Whirlpool tank+HLT
Mash tun + Lauter tun + kettle/ Whirlpool tank+HLT
Mash tun /Lauter tun + kettle/ Whirlpool tank+HLT
Mash tun with bottom stir, VFD, cylinder and bottom jacket, separately control
Lauter tun with bottom stir, VFD, bottom grain out door
Kettle with side and bottom steam jacket, separately controlled
Whirlpool tank: Flat or conical bottom, easy wort outlet
Double/triple sized HLT with steam jacket or coil
Double/triple sized CLT, cooling jacket
Stainless steel working platform with hand rails
Sanitary wort pumps with variable speed control
SS wort grant
Sanitary grade heat exchanger following customers brewing recipe
Cold and hot water mixing unit with flow meter, for mashing in and sparging.
Grain hydrator
Grain transfer system: Flexi auger or piping chain conveyor
Double rollers malt mill, capacity: 500-1000kg/h
Fermenters: Single or double brews, quantity to be defined
Bright beer tanks: Single or double brews, quantity to be defined
Options:
Separate whirlpool tank
Separate sink
Internal heater for boiling tank
Air controlled pneumatic valves
Touch screen, PLC: Siemens S7-1200/S7-300
Steam jacket for mash/lauter tun
Hopgun
Kettle vapor stack condenser
CUSTOMIZATION UPON EXACT REQUEST
Shipment: Could be EXE, CIF or DDU etc.
On site installation possible (when necessary)
