Frgel 130
Rheological additive
Frgel 130 is an organophilic smectite clay. It is a highly efficient and cost effective rheological additive for low to medium till higher polarity organic systems.
Advantage
For paints
Increases low shear viscosity
Provides sag resistance without impairing flow and leveling
Prevents pigment settling during storage
Controls flooding and floating
Prevents excessive vehicle penetration on porous substrates
Stops syneresis in thixotropic systems
For inks
It requires low shearing action than conventional organoclays to impart ultimate viscosity
Higher gelling efficiency in inks containing a range of organic liquids of low to midium till higher polarity
Increase plastic viscosity and "yield value" of inks
Reduces misting
Imparts particle suspension, preventing pigment agglomeration.
Typical properties
Composition organic derivative of a smectite
Color light cream
Form finely divided power
Specific weight g/cm3 1.9
Bulk density (g/l) 460
Partical size(dispersed) less than 1 micron
Moisture content, % 3.0 max
Loss on ignition, % 36.0 min
Fineness, through no.200 sieve , % 95 min
Applications
Frgel 130 can be used in interior and exterior paints, stains, tube colors, skin cleaners, eye shadow gloss, shampoo, suntangel, grease, plastic and rubber, printing inks, adhesives, foundry wash coats.
25kgs
Nanoclay
Nanolin dk series of nanoclay introduced by fcc inc are made from high purified smectite that exhibit ultra-fine phase dimensions. The size of nanolin dk series of nanoclay are typically in the range of 1-100 nm while been fully dispersed, the average fully dispersed thickness of platellite is around 25 nm; the aspect ratio is 100-1000.
25kgs/bag
Specificationsu addez rheological additive specially for coatings and other special additives.
With long history of using in these application fields for more than 50 years.
Advantagesu bestgel organoclay rheological additive including following advantages
Wide solvent use
Good suspension and syneresis control
Imparts thixotropic viscosity
Stabile over wide temperature range
Good slump/sag control
Strong anti-settling effect excellent starage stability conventionals require high shear conditions and polar activator
Can be degelled by certain additives
Order of addition very important for best performance
Potential negative impact on gloss.
25kgs/bag
ADDEZ® APP Retention agent with large molecular structure and with a positive charge, can absorb the negative of fines and fillers, the retention effect, but its molecular structure and contains a large number of hydrogen bonds is easily combined with the fibers to enhance effect. The additives with talcum powder retention increased by more than 60%, fines retention increased 20 - 30%.In 2, ADDEZ® APP multifunctional papermaking additives for paper physical indicators have markedly improved. C level for plate paper folding can increase 2-30%, the general folding can improve 15-20%, at the same time as the fines retention increased, filling the interstices between the fibers. On the board of the pulling force, flexibility, smoothness and uniformity, can significantly improve.3, because the ADDEZ® APP multifunctional papermaking additives retention and fine fibre and filler retention improvement, make the network under the white water concentration is reduced, reduce the pressure of environment protection.4, has highlighted the filtration effect, which can improve the operation, reduce the end breakage, improve the speed, improve production efficiency, reduce energy consumption, and reduce the cost of production.5, has obvious so that glue. On AKD sizing agent has good retention effect, after using this product can reduce the using amount of AKD sizing agent.In 6, the product is highly soluble in cold water, thus diluting the convenient use.Product use:ADDEZ® APP multifunctional papermaking additives, mainly used in kraft paper, white paper, paperboard, writing paper, copperplate paper, newsprint, toilet paper and high, TolA and other aspects of the paper. Can enhance, retention effect.Product function method:In 1, the first auxiliary diluted with water 20 times before joining network uniformly high in box.2, like adding content of about 0.4-1.5 (paper products calculation ), the drug should not be used metal container for storing, appropriate uses plastic, glass or glass container.3, prevent the macromolecular chain breaking, suitable for low speed pump.In 4, the product should be stored in ventilation, shade 30 degrees C storage under appropriate.5, the paper in the physical test, should be in first place for 24 hours under the condition of constant temperature, or wet kept for a long time, so that the sample and air fully balanced, moisture consistent premise.Packing.Industrial use of 50kg or 200kg plastic barrels packaging.
25KGS
