ADDEZ® APP Retention agent with large molecular structure and with a positive charge, can absorb the negative of fines and fillers, the retention effect, but its molecular structure and contains a large number of hydrogen bonds is easily combined with the fibers to enhance effect. The additives with talcum powder retention increased by more than 60%, fines retention increased 20 - 30%.In 2, ADDEZ® APP multifunctional papermaking additives for paper physical indicators have markedly improved. C level for plate paper folding can increase 2-30%, the general folding can improve 15-20%, at the same time as the fines retention increased, filling the interstices between the fibers. On the board of the pulling force, flexibility, smoothness and uniformity, can significantly improve.3, because the ADDEZ® APP multifunctional papermaking additives retention and fine fibre and filler retention improvement, make the network under the white water concentration is reduced, reduce the pressure of environment protection.4, has highlighted the filtration effect, which can improve the operation, reduce the end breakage, improve the speed, improve production efficiency, reduce energy consumption, and reduce the cost of production.5, has obvious so that glue. On AKD sizing agent has good retention effect, after using this product can reduce the using amount of AKD sizing agent.In 6, the product is highly soluble in cold water, thus diluting the convenient use.Product use:ADDEZ® APP multifunctional papermaking additives, mainly used in kraft paper, white paper, paperboard, writing paper, copperplate paper, newsprint, toilet paper and high, TolA and other aspects of the paper. Can enhance, retention effect.Product function method:In 1, the first auxiliary diluted with water 20 times before joining network uniformly high in box.2, like adding content of about 0.4-1.5 (paper products calculation ), the drug should not be used metal container for storing, appropriate uses plastic, glass or glass container.3, prevent the macromolecular chain breaking, suitable for low speed pump.In 4, the product should be stored in ventilation, shade 30 degrees C storage under appropriate.5, the paper in the physical test, should be in first place for 24 hours under the condition of constant temperature, or wet kept for a long time, so that the sample and air fully balanced, moisture consistent premise.Packing.Industrial use of 50kg or 200kg plastic barrels packaging.
25KGS
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
Corn starch is a white, tasteless, odorless powder, used in food processing. Maize starch is an important ingredient in the production of foodstuffs, and has been widely used as a thickener, stabilizer, colloidal gelling agent, water retention and as an adhesive.
Supplier: Flocculant and retention agents, such as cationic/anionic polyacrylamide
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Product Name: Hydroxypropyl methyl cellulose/Hypromellose Other Name: hpmc powder Molecular Formula: C3H7O Molecular Weight: 59.08708 Appearance: White Powder Purity: 99% CAS NO.: 9004-65-3 EINECS No.: 618-389-6 Supplier: ZHENYIBIO Hydroxypropyl Methyl Cellulose (HPMC) are water soluble polymers derived from cellulose. They are typically used as thickeners, binders, film formers, and water retention agents. They also function as suspension aids, surfactants, lubricants, protective colloids, and emulsifiers. In addition, solutions of these polymers thermally gel.
Chemical Name: Polyaluminium Chloride CAS NO. : 1327-41-9 Molecular Formula:AL2(OH)nCl6-nLm Product Name Activate Chemical PAC Liquid Poly Aluminum Chloride Liquid Description Polyaluminium Chloride / PAC is an effective primary inorganic coagulant based on trivalent Al3+, excellent for drinking water production, wastewater treatment, as well as swimming pool treatment. Through the hydroxyl ion bridging function and the polyvalent anion polymeric function, it produces large molecular and high electricity inorganic macromolecule, brings higher performance than traditional coagulants. Advantages * Can be used widely as a coagulant for industrial and potable applications. * Easily soluble in water, dissolves rapidly. * Cost is low, very competitive than other general coagulants * Floc forming fast, good activity, good filtering. * Don't need adding alkaline additives, if deliquescence, its effect remains the same. * Adapted for a wide pH value, strong adaptability * The Salt content in the effluent will be reduced after use PAC. * Can remove the water pollution of heavy metals and radioactive substances. * The active ingredient of high, convenient storage and transportation. Application Fields * Coagulant for different industrial and potable area * Retention agent for paper mill, as a sizing agent * Clarifying agent in Sugar, Medicine, Tanning, Cosmetic, etc * Dewatering agent, Wash coal
Sodium metabisulfite is white or yellow crystalline powder or small crystal, with a strong SO2 odor, soluble in water, the aqueous solution is acidic, when contacted with strong acid, SO2 is released to form corresponding salts, and it is oxidized to Na2S2O6 when placed in the air for a long time. Therefore, the product cannot be stored for a long time. Above 150 degrees Celsius, SO2 is decomposed. Specification TEST ITEMS TEST STANDARD Na2S2O5 % 96.5 FERRON(Fe) % 0.005 WATER INSOLUBLE % 0.05 ARSENIC(As) % 0.0001 HEAVY METAL(Pb) % 0.0005 Application Use 1 Used as a coagulant in the rubber industry. Use 2 Used as chromatographic reagents, preservatives and reducing agents in the dye and pharmaceutical industries. Use 3 In the food industry, it is used as bleaching agent, preservative, bulking agent, antioxidant, color retention agent and preservative. Use 4 In the printing and dyeing industry, it is used as a dechlorination agent for cotton cloth after bleaching, and as a cotton scouring aid. Use 5 The tanning industry is used for leather processing. Use 6 The chemical industry is used to produce hydroxyvanillin, hydroxylamine hydrochloride, etc. The photosensitive industry is used as developer and so on.
Sodium tripolyphosphate is an inorganic substance with chemical formula Na5P3O10. It is a kind of amorphous water-soluble linear polyphosphate. It is used as water retention agent, quality improver, pH regulator and metal chelator Main Application: Industrial use Used as detergent, auxiliary, also used in petroleum, metallurgy, mining, paper making, water treatment, etc.. Mainly used as synthetic detergent additives, synergist for soap and soap to prevent a fat separation and bloom. It has a strong emulsifying action on lubricating oils and fats and can be used to regulate the pH of buffer soap solutions. Water softener for industrial water. Tanning agent. Dyeing assistants. Paint, kaolin, Magnesium Oxide, calcium carbonate and other industries in the preparation of suspension as a dispersant. Drilling mud dispersant. The paper industry is used as an anti oil agent. Canned food, for the food industry in fruit juices, dairy products, soy milk and other quality improvement agent, water retention agent. Mainly for canned ham tender, broad beans in the skin softening, it can also be used as a thickening agent and softener.
HPMC is hydroxypropyl methylcellulose is water-soluble, non-ionic polymer that is commonly used as a thickener and water retention agent in a variety of applications- tile adhesives, wall putty, EIFS- the compound forms colloids when dissolved in� water. This non-toxic ingredient is combustible and can react vigorously with oxidizing agents.
