Overview of Hysteresis Brake
Standard Hysteresis Brakes produce torque strictly through a magnetic air gap without the use of magnetic particles or friction components. This method of braking provides far superior operating characteristics (smoother torque, longer life, superior repeatability, high degree of controllability, and less maintenance and down time) which make them the preferred choice for precise tension control during the processing of nearly any material, web or strand.
Structure of Hysteresis Brake
The hysteresis effect in magnetism is applied to torque control by the use of two basic components-a reticulated pole structure and a specialty steel rotor/shaft assembly-fastened together but not in physical contact. Until the field coil is energized, the drag cup and shaft can spin freely on its bearings. When a magnetizing force from either a field coil or magnet is applied to the pole structure, the air gap becomes a flux field. The rotor is magnetically restrained, providing a braking action between the pole structure and rotor.
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire sh ould exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Part. No. Model Specifications(mm)
L L1 D D1 D1 D2
1 W0202-2005-1505 15 5 2.0 0.5 0.2 0.2
2 W0202-2000-3300 33 * 2.0 * 0.2 0.2
3 W0202-3010-3015 30 15 3.0 1.0 0.2 0.2
4 W0202-3006-3010 30 10 3.0 0.6 0.2 0.2
5 W0202-3015-3015 30 15 3.0 1.5 0.2 0.2
6 W0202-3007-3508 35 8 3.0 0.7 0.2 0.2
7 W0303-3008-3012P 30 12 3.0 0.8 0.3 0.3
8 W0303-3012-3519 35 19 3.0 1.2 0.3 0.3
9 W0303-3008-4506 46 6 3.0 0.8 0.3 0.3
10 W0303-3020-3515 35 15 3.0 2.0 0.3 0.3
11 W0303-0800-3500 35 * 0.8 * 0.3 0.3
12 W0303-3018-4018 40 18 3.0 1.8 0.3 0.3
13 W0404-3010-3009 30 9 3.0 1.0 0.4 0.4
14 W0404-3007-4528 45 28 3.0 0.7 0.4 0.4
15 W0505-3012-4506T 45 6 3.0 1.2 0.5 0.5
16 W0606-3012-3520 35 20 3.0 1.2 0.6 0.6
17 W0606-3016-4010T 40 10 3.0 1.6 0.6 0.6
18 W0808-3018-3518 35 18 3.0 1.8 0.8 0.8
19 W0808-3018-3010 30 10 3.0 1.8 0.8 0.8
20 W1212-3022-3010 30 10 3.0 2.2 1.2 1.2
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Size can be customised, welcome your customised design
Overview of Organic Glass Copper Wire Shield ( accessaries full transparent wire barrel)
1. Transparent Barrel coiler is to accomplished because pressure gram of force organic glass strikes for one time merely, reason precise equipment and advanced polishing handicraft.
2. Main be used to enclose to enamel insulated wire, to start to transparent, beautiful, protecting enamel insulated wire an effect cover.
It is very important to protect the wire from damage, and our Transparent Barrel Coiler can offer this protection.
Advantange of Organic Glass Copper Wire Shield ( accessaries full transparent wire barrel)
The Transparent Wire Barrel Coiler to Protect Wire is made from ACRYL and ceramic eyelet which used for covering the wire spool, avoid the dust close wire, make sure the wire be loaded and passing smooth during winding for winding machine.
Transparent Wire Barrel Coiler to Protect Wire(Wire spool cover)----Barrel coiler is accomplished because yake force organic glass strikes for one time merely, reason precise equipment and advanced polishing technology, make that glossy, beautiful reaching a surface, on being used for cover mainly to enamel insulated wire circle, dust prevention attractive looks goes over line effect
Specification of Coil winding spare parts Anti Fall Dust Proof Translucent Wire Barrel
Unit: mm
Inner diameter 150 180 200 220 250 300
Height(can be changed by request) 300 300 300 300 300 300
Thickness 3 3 3 3 3 3
Dimensions customize available by requested.
Yokogawa mechanical tension meters (yan tension meter) are for accurately measuring the running line tensions on all kinds of wires (cooper, metal, aluminum, plastic and etc). Yarns and fibers.
With precise jeweled movement, Precision ball bearing mounted rollers and built-in damper, T1 tension meter completely eliminate the vibration and resistance caused by instrument itself, to provide reliable, accurate and steady tension reading as tension fluctuate.
1. Easy to read: 128*64 LCD display panel, clear display with high bright backlight.
2. Easy to operate: Simple and user friendly fuctional buttons.
3. Easy to hand: Clean Streamlined handle design.
4: Direct display of real time measurement.
5. Powered by replaceable lithium battery.
6. High precision, long service life
7. With memory back up function.
Product specification of the tension meter
Model Test range Minimum degree
T-101 -02 0-20g 0.5g
-05 0 -50g 1.0g
-10 0 -100g 2.0g
-20 0 -200g 5.0g
-30 0 -300g 10.0g
-50 0 -500g 10.0g
T-102 -01 0 -1000g 20.0g
-02 0 -2000g 50.0g
Advantage of our coil winding wire tension meter
1. Precise tension scale
2. Competitive price
3. Excellent quality of tension meter
4. Various kinds of tension meter for choosen
5. Fast response speed
6. Professional tensioner engineering team
7. Good after-sales service
Model Applied wire diameter(mm) Tension scope(g)
TCL Ï?0.20-Ï?0.60 200g-2000g
TCLL Ï?0.50-Ï?1.20 1000g-5000g
TC3L Ï?0.70-Ï?2.00 2000g-10000g
Product feature:
1. Tension test condition: Winding speed 5m/s, the tension range is 200-10000g.
2. TCL series thensioners are simple to be adjusted. Tension can be adujsted and pre-set to the require value according to the application so as to achieve appropriate winding condition,and to ensure the conformity of each coils technical parameters.
3. TCL series is the key device controlling the changable tension during winding, make the copper suitable and controble tension. So the the wired coils are more flat and , makiing the technical standarded reached.
Note
1. When the working angle and the rest angle are the same, or when the tension rod fall down to 90 degree angle, please reset the tension to avoid the wear and tear and reducing the life time.
2. When replace the wire during normal working status of tensioner, please check whether there is wire scrap. Make sure to clean them off otherwise it leead to inregular change of tension when starting again the tensioner.
Size can be customised, welcome your customised design
Overview of Organic Glass Copper Wire Shield ( accessaries full transparent wire barrel)
1. Transparent Barrel coiler is to accomplished because pressure gram of force organic glass strikes for one time merely, reason precise equipment and advanced polishing handicraft.
2. Main be used to enclose to enamel insulated wire, to start to transparent, beautiful, protecting enamel insulated wire an effect cover.
It is very important to protect the wire from damage, and our Transparent Barrel Coiler can offer this protection.
Advantange of Organic Glass Copper Wire Shield ( accessaries full transparent wire barrel)
The Transparent Wire Barrel Coiler to Protect Wire is made from ACRYL and ceramic eyelet which used for covering the wire spool, avoid the dust close wire, make sure the wire be loaded and passing smooth during winding for winding machine.
Transparent Wire Barrel Coiler to Protect Wire(Wire spool cover)----Barrel coiler is accomplished because yake force organic glass strikes for one time merely, reason precise equipment and advanced polishing technology, make that glossy, beautiful reaching a surface, on being used for cover mainly to enamel insulated wire circle, dust prevention attractive looks goes over line effect
Model Applied Wire Range (mm) Tension Range (gf)
MD04 Ï? 0.04- Ï? 0.08 10- 50
MD09 Ï? 0.09- Ï? 0.15 40- 150
MD16 Ï? 0.16- Ï? 0.50 160- 1200
MD40 Ï? 0.40- Ï? 1.00 200- 2000
Product feature:
--Magnetic damping tensioner is a magnetic field of media tension constant torque transfer device,
--The damping plate doesn't touch with magnet and without sliding friction, long use life time.
--The tension control is extreme stable.
-- It is simple and easy to fix on machinery, easy to adjust the output torque too, compact design.
-- Small size, always keep stable when it is running in a variety of locations.
Description of the Wire Guide Pulley.
Plastic Flanged Ceramic Wire guide pulley is commonly used component when wire passing is required, it can be used in coil winding machine. cable machine and the textile machinery as well. The porcelain ring is mounted on the bearing. Coil winding wire guide pulley(wire roller) will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia. there will be a partial sliding friction. The surface polish degree of the porcelain ring reaches Ra0.2;the beating during rotation is under 0.15.We select the 99% AL2O3 as the material with the hardness of HRA88 and the density of 3.85.. Two nylon side walls have been put to the both side of the ceramic ring and the bearing, coil winding wire guide pulley (wire roller) combines one wire roller
If you're interested in our flanged plastic pulley for thread rope yarn coil winding tensioner pulley, welcome to buy the quality products at low price from our factory. As one of the leading manufacturers in China, we also support customized service. For more details, contact us now.
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Description of the Wire Guide Pulley.
Plastic Flanged Ceramic Wire guide pulley is commonly used component when wire passing is required, it can be used in coil winding machine. cable machine and the textile machinery as well. The porcelain ring is mounted on the bearing. Coil winding wire guide pulley(wire roller) will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia. there will be a partial sliding friction. The surface polish degree of the porcelain ring reaches Ra0.2;the beating during rotation is under 0.15.We select the 99% AL2O3 as the material with the hardness of HRA88 and the density of 3.85.. Two nylon side walls have been put to the both side of the ceramic ring and the bearing, coil winding wire guide pulley (wire roller) combines one wire roller
If you're interested in our flanged plastic pulley for thread rope yarn coil winding tensioner pulley, welcome to buy the quality products at low price from our factory. As one of the leading manufacturers in China, we also support customized service. For more details, contact us now.
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Magnetic damper coil winding components tension control magnet damper
Introduction of the magnetic damper
1. The magnetic damper and name tension controller, tension control or brake, is a constant torque transmission medium of the magnetic field of the device.
Damping disk with magnets, no sliding friction without contact, the service life is long, tension control extremely stable.
2. Installation simple structure, the output torque is a convenient adjustment.
3. Structure compact design, small size, can be in all sorts of steady work position.
Usage of Magnetic Damper
Recommends that customers will scale value transferred to use 4 or above, if this time tension too large, had better choose a smaller size specifications of damper. If in scale value below 4, may have used the pulse of the force. Please click HouXiang 3 stated way eliminate pulse. Loosen screw, will turn to 10, turn the scale axis at the same time slow will scale turn to 0, and then turn to Scale needed to tighten lock screw, value. If use appeared in the process of tension, please repeat the above phenomenon pulsation adjustment method 3 steps until the satisfied tension. Damper magnet produce media magnetic field, use material, the use of large brittle do not open it, lest attaint parts.
Specification of magnetic damper
Model Applied wire diamiter(mm) Tension scope(cn)
MTB-02 0.04_ 0.08 10g_ 50 g
MTB-03 0.09_ 0.15 40g_ 150 g
MTB-04 0.16_ 0.50 160g_ 1200 g
MTB-05 0.40_ 1.00 200g_ 2000g
MTB-06 1.00_ 3.00 800g_ 3600g
MTB-08 3.00_ 6.00 3600g_ 6500g
Advantage of our coil winding components magnetic damper
1. Precise tension of magnetic damper
2. Competitive price of magnetic damper
3. Excellent quality of tensioner
4. Various kinds of tensioners for choosen including mangetic tension, electronic tensioner,
Mechanical tensioner and servo tensioner.
5. Fast response speed
6. Professional tensioner engineering team
7. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Part. No. Model Specifications(mm)
D1 D2 D D1 L L1
1 TB0403-2008-1505 0.3 0.4 2.0 0.8 15 5
2 TB0403-2008-3007 0.3 0.4 2.0 0.8 30 7
3 TB0403-2008-1505 0.3 0.4 2.5 0.8 15 5
4 TB0403-2010-3510 0.3 0.4 2.0 1.0 35 10
5 TB0403-3010-1505 0.3 0.4 3.0 1.0 15 5
6 TB0403-3008-2504 0.3 0.4 3.0 0.8 25 4
7 TB0403-3008-3007 0.3 0.4 3.0 0.8 30 7
8 TB0403-3010-3015 0.3 0.4 3.0 1.0 30 15
9 TB0403-3010-4510 0.3 0.4 3.0 1.0 45 10
10 TB0605-3010-3010 0.5 0.6 3.0 1.0 30 5
11 TB0605-3012-3010 0.5 0.6 3.0 1.2 30 10
12 TB0605-3015-1505 0.5 0.6 3.0 1.5 15 5
13 TB0605-4020-3010 0.5 0.6 4.0 2.0 30 10
14 TB0505-3015-3015 0.5 0.5 3.0 1.5 30 15
15 TB0806-3015-3015 0.6 0.8 3.0 1.5 30 15
16 TB0806-2018-3507 0.6 0.8 2.0 1.8 35 7
17 TB0806-3015-3008 0.6 0.8 3.0 1.5 30 8
18 TB1008-40201505 0.8 1.0 4.0 2.0 15 5
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L
1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30
2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35
3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30
4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35
5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30
6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Item Model Ã?D Ã?D1 Ã?d2 Ã?d2 L1 L
1 TC1003-3008-3006 3 0.8 0.3 1.0 6 30
2 TC1003-3010-3510 3 1.0 0.3 1.0 10 35
3 TC1005-3010-3008 3 1.0 0.5 1.0 8 30
4 TC1005-3014-3510 3 1.0 0.5 1.0 10 35
5 TC1207-3014-3008 3 1.4 0.7 1.2 8 30
6 TC1210-3020-3010 3 2.0 1.0 1.2 10 30
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Key advantages of coil winding nozzle/ wire guide nozzle.
1)High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.
2)Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.
3)Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4) Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.
Specification of coil winding nozzle/ wire guide nozzle.
Part. No. Model Specifications(mm)
L L1 D D1 D1 D2
1 W0202-2005-1505 15 5 2.0 0.5 0.2 0.2
2 W0202-2000-3300 33 * 2.0 * 0.2 0.2
3 W0202-3010-3015 30 15 3.0 1.0 0.2 0.2
4 W0202-3006-3010 30 10 3.0 0.6 0.2 0.2
5 W0202-3015-3015 30 15 3.0 1.5 0.2 0.2
6 W0202-3007-3508 35 8 3.0 0.7 0.2 0.2
7 W0303-3008-3012P 30 12 3.0 0.8 0.3 0.3
8 W0303-3012-3519 35 19 3.0 1.2 0.3 0.3
9 W0303-3008-4506 46 6 3.0 0.8 0.3 0.3
10 W0303-3020-3515 35 15 3.0 2.0 0.3 0.3
11 W0303-0800-3500 35 * 0.8 * 0.3 0.3
12 W0303-3018-4018 40 18 3.0 1.8 0.3 0.3
13 W0404-3010-3009 30 9 3.0 1.0 0.4 0.4
14 W0404-3007-4528 45 28 3.0 0.7 0.4 0.4
15 W0505-3012-4506T 45 6 3.0 1.2 0.5 0.5
16 W0606-3012-3520 35 20 3.0 1.2 0.6 0.6
17 W0606-3016-4010T 40 10 3.0 1.6 0.6 0.6
18 W0808-3018-3518 35 18 3.0 1.8 0.8 0.8
19 W0808-3018-3010 30 10 3.0 1.8 0.8 0.8
20 W1212-3022-3010 30 10 3.0 2.2 1.2 1.2
Advantage of our coil winding accessaries
1. Precise coil winding accessaries such as wire guide pulley, magnetic damper, electric brake and nozzles.
2. Competitive price
3. Excellent quality of tension device and accessaries
4. Fast response speed
5. Professional tensioner engineering team
6. Good after-sales service
Speficication of telfon toroud coil winding hook
Description Part No. Suited wire Dia. W(mm) T(mm) L(mm) D(mm)
Hand held double hook 21 â?¤ 0.14mm 0.94 0.44 130.00 7.00
Hand held double hook 12 â?¤ 0.14mm 1.00 0.50 130.00 7.00
Hand held double hook 23 â?¤ 0.14mm 0.92 0.50 130.00 7.00
Hand held double hook 24 â?¤ 0.16mm 0.96 0.60 130.00 7.00
Hand held double hook 25 â?¤ 0.16mm 1.04 0.70 130.00 7.00
Hand held double hook 8 â?¤ 0.16mm 1.00 0.68 130.00 7.00
Hand held double hook 22 â?¤ 0.16mm 1.10 0.64 130.00 7.00
Hand held double hook 7 â?¤ 0.16mm 1.20 0.86 130.00 7.00
Hand held double hook 11 â?¤ 0.2mm 1.48 0.84 130.00 7.00
Hand held double hook 26 â?¤ 0.3mm 1.29 0.76 130.00 7.00
Hand held double hook 6 â?¤ 0.4mm 1.85 1.34 130.00 7.00
Hand held double hook 29 â?¤ 0.4mm 2.10 1.37 130.00 7.00
Hand held double hook 27 â?¤ 0.45mm 2.60 1.40 130.00 7.00
Hand held double hook 28 â?¤ 0.45mm 2.22 1.34 200.00 7.00
Hand held double hook 5 â?¤ 0.5mm 2.90 1.74 130.00 7.00
Hand held double hook 14 â?¤ 0.7mm 3.21 1.84 200.00 7.00
Hand held double hook L14 â?¤ 0.7mm 3.20 1.84 220.00 7.00
Hand held double hook 18 â?¤ 0.7mm 3.1 1.6 200.00 7.00
Hand held double hook 9 â?¤ 0.8mm 3.75 2.00 247.00 7.00
Hand held double hook 16 â?¤ 0.8mm 3.78 2.34 215.00 7.00
Hand held double hook L16 â?¤ 0.8mm 3.78 2.34 230.00 7.00
Hand held double hook 15 â?¤ 1.0mm 4.66 3.24 200.00 7.00
Hand held double hook L15 â?¤ 1.1mm 4.70 3.10 220.00 7.00
Hand held double hook 10 â?¤ 1.1mm 5.80 3.20 247.00 7.00
Hand held double hook 17 â?¤ 1.3mm 5.80 3.90 225.00 7.00
Hand held double hook L17 â?¤ 1.3mm 5.80 3.90 250.00 7.00
Hand held double hook 3 â?¤ 1.7mm 7.00 4.80 240.00 11.62
Hand held double hook 4 â?¤ 2.0mm 10.00 7.00 240.00 10.0
Single hook Specification
Part No. W T H L D Suited wire Dia
14# 3.21 1.84 0.85 51 7 â?¤0.7
9# 3.75 2 0.8 51 7 â?¤0.8
16# 3.78 2.34 0.9 51 7 â?¤0.8
15# 4.66 3.24 1 51 7 â?¤1.0
L15# 4.7 3.1 1.1 51 7 â?¤1.1
10# 5.8 3.2 1.5 51 7 â?¤1.1
17# 5.8 3.9 1.55 51 7 â?¤1.3
13# 6.6 6.2 3.1 51 10 â?¤1.5
3# 7 4.8 2.1 51 11.62 â?¤1.7
4# 10 7 2.6 51 10 â?¤2.0
1# 10 8 4.5 48.5 40 â?¤2.5
Avg. Air cons: 584cm3/cycle
Air pressure: 5~6kg/cm2
Cutting Capacity: 0.02-0.5mm cooper wire, 0.02-0.08iron wire, 0.02-0.06 stainless steel and
0.02-2.0 soft plastic
This air nipper is small in size and light in weight, easy and convenient to control and operate,
Flexible and powerful, apply to cutting the plastic, iron, copper, stainless steel and other wires,
Rapidly and effectively, low noise and non- slip handle design to offers a wonderful and quiet
Environment. Other size air nipper bodies
And cutting blades are available for various cutting and crimping applications.
Cylinder Model Blades Model Applied cutting wire (¢mm)
Copper wire Steel wire Soft plastic wire
Manual Operation CS10, C20, C40 WIS-A, B, D, F, G
WLS/WCS/WL 0.02-1.0 0.02-0.5 0.02-2.0
Auto Operation C30 WIS-A, B, D, F, G
WLS/WCS/WL 0.02-1.0 0.02-0.5 0.02-2.0
C25 WIS-E/F 0.02-1.0 0.02-0.5 0.02-2.0
C50 WIS-E2 0.02-1.0 0.02-0.5 0.02-2.0
CS-5 * 0.02-0.50 * *
C45 WIB-A/B/C 0.1-2.5 0.1-1.5 0.1-3.0
