1.Brief introduction of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig is produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for geological industrial and civil buildings, bridges, railway, highway, hydro-power industry survey, geophysical exploration, advanced drilling and grouting hole drilling, embedded hole guiding, broken hole, hole and small household wells check out.
QZ-2B gasoline engine sampling drilling rig has the following features: compact structure, small volume, light weight, two gears, easy to move.
2. Technical parameters of QZ-2B gasoline engine sampling drilling rig
QZ-2B gasoline engine sampling drilling rig
Bottom hole diameter (mm) 32-91
Drilling depthm soil 9110-15m
stone915-10m
stone7510-15m
stone6015-20m
stone4620-25m
Drilling pipe (mm) 28
Rotating speedr/min 200-570
Torquen.m 110
Gasoline engine house power(hp 5 (3.5kw)
displacementcc 196
Dimensionl*w*h 600*450*1900
Weightkg 90
3.Configuration list of QZ-2B gasoline engine sampling drilling rig
Item Parameter Unit Quantity
Gasoline engine sampling drilling rig QZ-2B set 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Pipe joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 60 pc 1
Safety clamp hold 1
Water seal 30*50*10 pc 4
Oil seal 30*50*10
Oil seal 17*50*10
Control wheel pc 1
1.Brief introductions of QZ-3 diesel engine sampling drilling rig
The QZ-3 diesel engine sampling drilling rig is independently developed by Shandong Master Machinery Group Co.,Ltd., which is a portable multi-purpose drilling rig. The QZ-3 diesel engine sampling drilling rig is equipped with a hoist, which is more convenient for geological drilling and lifting. It can do standard drilling hole, earth sampling and cone penetration with the heavy hammer.
The QZ-3 diesel engine sampling drilling rig uses diesel power, and it is more convenient to purchase oil. The rig is reasonable in design, advanced in structure, easy to assemble and disassemble, small in size, light in weight and easy to transport, which brings great convenience for field investigation and construction.
2. Technical parameters of QZ-3 diesel engine sampling drilling rig
QZ-3 diesel engine sampling drilling rig
Borehole diameter (mm) 46-110
Drilling depthï¼?mï¼? soil LayerÏ?110ï¼?15-20m
lithosphereÏ?91ï¼?20-25m
lithosphereÏ?75ï¼?25-30m
lithosphereÏ?60ï¼?30-40m
lithosphereÏ?46ï¼?40-50m
Drilling pipe diameter (mm) 30
Torqueï¼?n.mï¼? 180
Dimensionï¼?l*w*hï¼? 680*1200*3800(highly customizable)
Weightï¼?kgï¼? 165
3.Configuration List of QZ-3 diesel engine sampling drilling rig
Item Specifications Unit Quantity Remarks
Base
QZ-3 pc 1
Geological engineering drilling rig
Winding engine pc 1
Drilling tower pc 2
Manual windlass pc 1
Diesel engine pc 1
Gear box pc 1
Drilling pipe including joint 30*1000 pc 15 Drill pipe
Drilling pipe including joint 30*2000 pc 5
Reducing nipple 58/38 pc 1 60mm core drill tool
Core barrel 58*800 pc 1
Core barrel 58*1500 pc 1
Diamond bit 60 pc 1
Reducing nipple 73/38 pc 1 75mm core drill tool
Core barrel 73*800 pc 1
Diamond bit 75 pc 1
Safety clamp
Tool
Pipe wrench
Drill rod tong
Oil seal pc 2 Vulnerable parts
Safety plate pc 1
1. Applications of HZ-130Y hydraulic core drilling rig
·geological survey and exploration
·basic exploration for roads
·high-rise buildings
·inspection holes for various concrete structures
·river embankments
·grouting holes
·direct grouting,
·civil water well
·ground temperature central air
conditioners.
2.Features of HZ-130Y hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This machine adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
3.Technical parameters of HZ-130Y hydraulic core drilling rig
HZ-130Y hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90-75°
Drill weight (Not include power) 750kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
1.Brief introductions of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig adds shifting slipway on the basis of common drilling rig, which can realize rapid replacement of drilling tools and improve work efficiency and reduce labor usage.
1.Applications of HZ-130YY hydraulic core drilling rig
·this core drilling rig is suitable for drilling water well, soil exploration, geophysical exploration, road and building exploration and drilling blasting holes.
·drilling bits can be chosen according to the different soil condition, such as alloy, diamond and composite.
·2-9 grades of sandy clay and rock.
3.Features of HZ-130YY hydraulic core drilling rig
·the automatic feed mechanism with oil pressure can improve the drilling efficiency and reduce the labor intensity of the workers.
·the ball card holding mechanism is used instead of the chuck, which can be operated without stopping the rod, and the operation is convenient, safe and reliable.
·hoist is installed with holder, forming structure of double support wheel so that it can withstand strong impact
·four groups of bearings are located in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complicated geological conditions such as the gravel layer, the pebble layer and so on.
This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance.
4.Technical parameters of HZ-130YY hydraulic core drilling rig
HZ-130YY hydraulic core drilling rig
Drill hole depth 130m
Maximum opening diameter 75-220mm
Final hole diameter 75mm
Take the initiative to drill pipe 53/59*4200mm
Drill pipe diameter 50mm
Borehole inclination 90°-75°
Power(diesel engine) 13.2kw 2200r/min
Size 850kg/2400*950*1400
Vertical shaft
Vertical spindle speed 142/285/570r/min
Vertical stroke 450mm
Hoist
Single rope lift 9.6kn
Single rope winding speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Diameter of wire rope 9.3mm
Wire rope capacity 27m
Derrick
Rated load 2t
Effective height 6m
Towerleg specifications 73mm
Mud pump
Model BW95
Flow 95l/min
Maximum pressure 1.2mpa
Reciprocating frequency 93r/min
Suction pipe diameter 51mm*4.5m
Diameter of high pressure pipe 32mm*6m
1. Characteristics of XYD-200 crawler hydraulic core drilling rig
·drilling rig uses automatic Telescopic drilling rig ,it uses two high-strength cylinders to support.There is a group of hydraulic valves to control super nation of drill tower so that it saves time and effort, safe and reliable when user operates, the maximum for the user to create benefits.
·the chassis uses a rubber belt track so that the weight is light,the cost of life cycle is lower.It can reduce noise of the vehicle walking mechanism,reduce car bodyï¼?s shake,reduce the oil consumption.It can walk on the pavement of city and donï¼?t hurt the pavement.
·the chassis comes with four high-strength threaded legs(or Hydraulic high leg) the threaded legs install rate and adjust is fast and convenient, can be used for work plane leveling.It can make loading and unloading reduce the cost of to improve efficiency.It also can be used as auxiliary support when the track drilling rig is working.
·using 48V electric starting diesel engine is reduced the operateï¼?s labour intensity greatly.Especially in cold season,when diesel engine start hardly,it will show superiority vastly.
·the machine is equipped with BW-160 independent mud pump,the pump flow and pressure are big,the maintenance is convenient,the parts of the machine are convenient to buy all over the country.
2. Technical parameters of XYD-200 crawler hydraulic core drilling rig
XYD-200 crawler hydraulic core drilling rig
Drilling depth 200m
Maximum opening diameter 75-300mm
Final hole diameter 75mm
Kelly 53/59*4200mm
Drill pipe diameter 50/60mm
Drilling angle 90°-75°
Auxiliary power diesel engine 16.2kw 2200r/min
Structural weight/Size 3000kg 3800*1950*2700
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Windlass
Single rope lifting force 24kn
Single rope lifting speed 0.12/0.22/0.49/0.95m/s
Drum diameter 140mm
Wire rope diameter 13mm
Wire rope capacity 35m
Derrick
Rated load 5t
Effective height 6m
Tower leg specification 89mm
1. Characteristics of XYC-200A tricycle-mounted hydraulic core drilling rig
·XYC-200A tricycle-mounted hydraulic core drilling rig is multi-function hydraulic vehicle-mounted core drilling machine .
·The tricycle is Tricar. The drilling rig, engine, BW-160 pump and hydraulic drill tower are all installed on the tricycle, so it us easy for transportation.
·XYC-200A tricycle-mounted hydraulic core drilling rig with BW160 pump which has high pressure and high flux, to ensure the drilling depth and hole diameter.
·The tricycle drilling rig is equipped with shift unit,so the drilling rig can move back and forth
·The highest speed can reach 1045r/min with 5 gears, which improves the drilling efficiency
·The drilling rig is Adopted 53*59 drilling rod, which has high rigidity and strong delivery torque
·Equipped with taper clutch, made the machine easy to operate and free of maintenance.
·Use large module planetary gear and add supporting frame, highly increased hoisting and braking ability of the winch.
·Vertical spindle are fixed by four groups of bearings to ensure that the core rig is rigid enough for gravel layer and other complex geological conditions.
2. Parameters of XYC-200A tricycle-mounted hydraulic core drilling rig
Drilling depth 200m
Max. open hole diameter 75-260mm
End hole diameter(mm) 75
Drill rod diameter 50mm
Drilling tower height 6500mm
Drilling angle 90-75
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. single line hoisting capacity 1600kg
Single line lifting speed 17/35/75/151r/min
Tightrope diameter 12.5mm
Tightrope cubic measure 35mm
Hug floodgate belt width 70mm
Mud Pump
Type Horizontal Single Urn Twin-action
Discharge displacement 170l/min.
Diesel S1115 22HP
Electric motor 15kw,1440r/min
Max. pressure 1.5mpa
Work pressure 0.7mpa
Water inlet diameter 30mm
Water outlet diameter 25mm
Triangle conveyre belt B1728mm
Chassis
Chassis Tricar(Pictures of vehicle-mounted drilling rigs for reference only)
1.Features of XY-130 hydraulic core drilling rig
·Hoist installation holder, forming structure of double support wheel, can withstand strong impact.
·Four groups of bearings are positioned in the vertical shaft box to ensure that the gyration is rigid enough to cope with the complex geological conditions such as the gravel layer and the pebble layer.
·This drilling rig adopts the conical clutch, which has the characteristics of large transmission torque, convenient operation and no maintenance required.
·Using 53*59 hexagon active drill rod, which has strong rigidity and large torque transmission
2.Specifications of XY-130 hydraulic core drilling rig
XY-130 hydraulic core drilling rig
Drilling depth 130m
Maximum open hole caliber 220mm
End hole caliber 75mm
Drill rod caliber 50mm
Drilling angle 90
Drill weight (Not include power) 600kg
Spindle
Spindle speed 142 285 570r/min
Spindle stroke 450mm
Hoist
Max.single line hoisting capacity 1600kg
Single line lifting speed 0.41/0.82/1.64m/s
Drum diameter 140mm
Wire rope diameter 13mm
Tightrope caliber 27m
Mud pump
Type Horizontal single urn twin-action
Electric motor 95/77 l/min
Maximum pressure 1.2mpa
Work pressure 0.7mpa
Water inlet caliber 30mm
Water to exit caliber 20mm
Triangle conveyer belt B1575mm
Matched driving power (diesel engine and motor) 18hp diesel engine and 11kw motor
1. Characteristics of XYD-3 crawler hydraulic core drilling rig
XYD-3 crawler hydraulic core drilling rig is mainly used for geological general investigation and exploration,road and tall building foundation exploration,kinds of hole in concrete structure,river levees,subgrade grouting hole drilling and direct grouting,civil wells and earth temperature central air-conditioner,ect.
·The drilling rig is equipped with crawler chassis device, which is easy to move with fast speed.
·The crawler device is made of resistant steel mill.
·Hydraulic oil pressure feed device, which improves drilling efficiency.
·Pressure gauge displays the condition of the bottom of the drill hole.
·Drill mast controlled by hydraulic cyliner so it improves the efficiency.
·Diesel engine adopts the electric starter to reduce the labor usage.
2. Parameters of XYD-3 crawler hydraulic core drilling rig
Drilling depth 600m
Max. open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90°-75°
Spindle
Spindle forward speed 30-1050r/min
Spindle reverse speed 29-137r/min
Spindle stroke 600mm
Spindle inner diameter 96mm
Main Winch
Single line lifting speed 0.5/0.9/1.4/1.9m/s
Diameter of wire rope 12.5mm
Brake width 90mm
Drum diameter 300mm
The biggest single rope hoisting capacity 30kn
Mud pump
Type Horizontal triples BW-250 Mud Pump
Displacement 250 l/min
Water inlet diameter 75mm
Water outlet diameter 50mm
Power
Diesel engine 38kw
Electric motor Y180L4 22KW
Weight 6500kg
Size 2500*900*1800mm
1.Features of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 is a vehicle-mounted hydraulic core drilling rig.The drilling rig transmission system and hoist, mud pump and other important accessories are all installed on the chassis. The layout is reasonable and compact. And the operation is simple.
The drilling rig is equipped with high pressure and large flow BW-250 pump, which ensures the drilling depth and borehole diameter.
2. Applications of XYC-3 vehicle-mounted hydraulic core drilling rig
·geological survey and exploration
·road and high-rise building foundation exploration
·all kinds of concrete structure inspection holes
·river embankments
·subgrade grouting holes
·drilling and direct grouting
·civil use water wells
·ground temperature central air conditioners
3. Parameters of XYC-3 vehicle-mounted hydraulic core drilling rig
XYC-3 vehicle-mounted hydraulic core drilling rig
Drilling depth 30-600
Drill hole diameter 300-75
Diameter of the end hole 75
Drill angle 90-75
Spindle forward core speed 30-1050
Spindle reverse core speed 29-137
Spindle stroke 600
Main winch lifting force
(with single line) 3000
Main winch rope capacity 65
Lifting speed 0.3-1.9
Rope diameter 12.5
Drill mast height 7000
Drill effective height 6500
Driving drilling rod 59*53ã??70*63ã??79*89
Drilling rod diameter 42/50/60
Weight 3500
Engine Model:Yunnei YN27
BW-250 mud pump Rated flow (l/min) 250
Rated power(mpa) 7
Driving power(kw) 15
Host weight(kg) 500
Dimension(mm) 1110*994*665
Chassis
vehicle(Pictures of vehicle-mounted drilling rigs for reference only)
1.Brief introduction of QTZ-2 soil sampling drilling rig
QTZ-2 soil sampling drilling rig adopts the more power, and the impact force is stronger and the drilling depth is deeper, which can drill up to 10-15 meters.
2. Applications of QTZ-2 soil sampling drilling rig
·Geotechnical engineering investigation; environmental soil survey; agricultural soil survey.
·Groundwater survey; coastal geological survey; wetland environment investigation.
·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling.
2.Technical parameters of QTZ-2 soil sampling drilling rig
QTZ-2 soil sampling drilling rig
Power power 3.3HP
lighter way backflush pull rope
oil consumption 0.55 l/h
Impact times 1650r/min
Impact energy 35J-65J
Core depth 10m-15m
Host weight 25kg
1.Brief introductions of QTZ-3D electric soil sampling drilling rig
QTZ-3D electric soil sampling drilling rig is an electric version of the QTZ-3 soil drilling rig (gasoline engine).
The improvement of QTZ-3D electric soil sampling drilling rig is mainly engine system. While QTZ-3 soil sampling drilling rig is equipped with gasoline engine, QTZ-3D is powered by electric. The QTZ-3D electric soil sampling drilling rig selects pure copper winding two phase electric motor as a power source. The advantage of using the electric engine as the power source is its stability, and it can continuously improve the working efficiency with a certain kind of power operation equipment. It greatly improves the feed speed. In addition, QTZ-3D electric soil sampling drilling rig is easy to operate, safe and stable, and can greatly reduce the labor force during the drilling operations.
2.Applications of QTZ-3D electric soil sampling drilling rig
·geotechnical investigation
·environmental soil survey
·gricultural soil survey
·groundwater survey
·coastal geological survey
·wetland environmental investigation
·tailing pond investigation
·archaeological investigation
·physical chemistry exploration secondary halo sampling
·the description of soil structure
3.Technical parameter s of QTZ-3D electric soil sampling drilling rig
QTZ-3D electric soil sampling drilling rig
Voltage 220v
Power 3.6kw
Lighter way switch mode
Energy dissipation low power consumption
Impact times 2600min/m
Impact energy 60j-79j
Core depth 15m-20m
Host weight 22kg
1.The brief introductions of SJD-2B collapsible electric water well drilling rig
The collapsible electric water well drilling rig is widely used in home / factory water wells, farmland irrigation wells, water and air conditioning, construction pile driving and so on.
2.The specifications of SJD-2B collapsible electric water well drilling rig
·Punching range: 60-250mm;
·Drill pipe diameter: 1.2 inch;
·Drilling depth: 100mm aperture can be 70 meters, 250mm aperture can be30meters.
·Voltage: 220V
·Rotary motor: 4000W;
·Speed: 80r/min, can be positive and reverse;Lifting motor: 1000W;
·The overall size of the whole machine is long 900mm, wide 700mm, high 2200mm (collapsible).
·The weight of the whole machine is 70KG (including drilling frame / rotary motor / lifting motor).
1.The brief introductions of gasoline engine water well drilling rig
·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance.
·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced.
·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors.
·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well.
2 .The features of the gasoline engine water well drilling rig
The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on.
The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg.
Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.The applications of FY260 crawler pneumatic water well drilling rig
·civil engineering drilling
·geothermal drilling,
·drilling with large diameter
·deep drilling footage
·fast, flexible and efficient.
2.The specifications of FY260 crawler pneumatic water well drilling rig
Model FY260
Gross weight t 6.2
External dimension mm 3900*1950*2550
Aperture mm 140-325
Drilling depth m 260
Feed stroke mm 3000
Travel speed km/h 2.5
Grade ability max. 30°
Rising height from ground mm 250
Wind pressure mpa 1.7-3.0
Air consumption m³/min 17-35
Engine power kw 85
Rotary speed rpm 40-70
Rotation torque n.m 7000-9000
1. Brief introductions of KQZ-70D pneumatic-electric DTH drilling rig
KQZ-70D pneumatic-electric DTH drilling rig is a new type of high efficient drilling rock equipment designed for water conservancy projects and construction sites. It is widely used for drilling in all kinds of rock strata in open pit, water conservancy and construction slope treatment.
KQZ-70D pneumatic-electric DTH drilling rig is a percussive rotary drilling rig. Its internal structure is different from that of a general jack drill. Its valve train and reciprocating piston mechanism are independent, that is impactor. The front is directly connected to the bit, and the back is connected to the drill pipe. when drilling the rock, the impactor dive the hole. The piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom.
2. Features of KQZ-70D pneumatic-electric DTH drilling rig
Small in size, light in weight, suitable small space that large and medium-sized drilling rig can not work , convenient and flexible.
3.Specifications of KQZ-70D pneumatic-electric DTH drilling rig
KQZ-70D
Borehole diameter mm 50-80
Drilling depth m 10-15
Rotating speed r/min 112
Air consumption m³/min 3.5-4.5
Cylinder diameter mm 90
Drilling pipe mm 42
Motor power kw 3
Main engine length mm 1524
Main engine weight kg 148
1.Brief introductions of KQZ-100D pneumatic-electric DTH drilling rig
KQZ-100D pneumatic-electric DTH drilling rig is a new type of high efficient rock drilling equipment, designed for water conservancy projects and building materials sites. It is widely used for drilling in all kinds of rock stratum and drill hole. For example, water conservancy and construction slope treatment.
KQZ-100D pneumatic-electric DTH drilling rig is an impact rotary drilling rig. Its internal structure is different from the general drilling machine. Its gas distribution and piston reciprocating mechanism are independent with each other. The front end is directly connected to the bit, and the back end is connected to the drill pipe. When it is divided into the hole, the impactor will rotate in hole. the piston (hammer body) in the impactor is made reciprocating to strike the drill tail through the valve, making the drill produce a kind of gyration force to the rock bottom.
2.Features of KQZ-100D pneumatic-electric DTH drilling rig
Small volume, light weight, suitable for large and medium-sized drilling rig can not workplace, convenient and flexible.
3.Specifications of KQZ-1 00D pneumatic-electric DTH drilling rig
KQZ-100D
Borehole diameter mm 65-150
Borehole depth m 20-25
Rotating speed of drilling tools r/min 90
Air consumption m³/min 6-8
Cylinder diameter mm 150
Drilling pipe mm 50/ 60
Motor power kw 4
Main engine length mm 2400
Main engine weight kg 224
1.Brief introductions of KHYD110 electric rock drilling rig
·The electric rock drilling rig can be fitted with drill stand, and can be drilled horizontally or upward in any direction.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In the operation of electric motor rock drilling rig, we only need to operate the handwheel, and the electric motor rock drilling rig can advance itself and return quickly.
2.Specifications of KHYD110 electric rock drilling rig
Model Unit KHYD110
Rated output power of motor kw 5.5
Rated voltage of motor v 380/660
Rated frequency of motor hz 50
Rated current of motor a 11.6
Motor speed r/min 1440
Motor phase number three phase communication
Rated working mode continuity
Drilling speed mm/min 280
Speed of return m/min
Borehole diameter mm 42-80ï¼?rockï¼?
Hardness range protodikonov`s scale of hardness f
1.Brief introductions of ZDY-1250 full hydraulic tunnel drilling rig
ZDY-1250 hydraulic tunnel drilling rig is used for coal mine: Z stands for drilling rig; D stands for tunnel; Y stands for hydraulic driven, and 1250 is the maximum output torque of 1250n. m.
2.Applications of ZDY-1250 full hydraulic tunnel drilling rig
ZDY1250 tunnel drilling rig is mainly used for drilling holes of gas pumping (row), grouting hole, water injection hole, anti process and pressure relief hole, geological exploration hole and other engineering drilling holes. Drilling rig can drill holes in the range of azimuth and dip angle specified in the basic parameter table.
3.Specifications of ZDY-1250 full hydraulic tunnel drilling rig
Project Unit ZDY-1250
Maximum drilling depth m 200
Open hole diameter mm Ф87/Ф115
End hole diameter mm Ф65/Ф75
Drilling pipe diameter mm 50
Drilling angle ° -90-+90
Rated output rotating speed r/min 80/170
Rated output torque n.m 1250/600
Rated power kw 22
Rated voltage v 380/660
Rated current a 42.5/24.5
Feeding force kn 60
Pullout force kn 45
Anchorage force kn 4*45
Rated advance speed m/min 0-1.5
Feed stroke mm 850
Hardness range (protodyakonov scale of hardness) fâ?¤10
Noise db(a) â?¤92
Main engine dimension (long*width*high) mm 2240*1000*1478
Total weight (without drill rod) kg 1820
1.Brief introductions of ZLJ650 grouting reinforcement drilling rig
ZLJ-650 grouting reinforcement drilling rig is mainly used for drilling holes with different angles in underground mine, tunnel, subway and slope support.
This drilling rig adopts mechanical drive, hydraulic feed with small size, light weight, The drilling rig is reliable and convenient to operate.
2. Specifications of ZLJ650 grouting reinforcement drilling rig
Drilling hole diameter 50-113mm
Hole depth 200m
Drilling pipe diameter 42mm
Open hole diameter 50-113mm
End hole diameter 56-113mm
Vertical rated speed 340 192 112 r/min
Vertical shaft torque rating 130/ 230/ 400 n.m
Main shaft angle 0-360
Spindle stroke 400mm
System pressure rated 8mpa
Feeding force 9kn
Elevating power 12kn
Winch lifting capacity 7.35kn
Drum Capacity 26.8m
Wire rope diameter 8.85mm
Oil pump type YBC-12/80
Motor power 7.5kw
Dimension 1200*700*1280mm
Total weight 560kg
1. Applications of XY-200 hydraulic core drilling rig
Geological survey, geophysical exploration, road and high-rise building foundation exploration, wells, blasting holes and other drilling projects.
2. Parameters of XY-200 hydraulic core drilling rig
Maximum opening diameter 400mm
Maximum borehole depth 200m
Diameter of the end hole 75mm
Borehole dip angle 90-75°
Machine overall size 2.75*0.95*1.60m
Drill pipe diameter 50mm
Weight of drill rig diameter of drill pipe (without power) 760kg
1.Applications of HZ-200Y hydraulic core drilling rig
Geological survey and exploration, road and high-rise building foundation exploration, and all kinds of concrete structure inspection holes, river embankments, subgrade grouting holes, drilling and direct grouting, civil water well and ground temperature central air conditioners.
2.Features of HZ-200Y hydraulic core drilling rig
·adopts 53*59 hexagon drilling, which has high rigidity and strong delivery torque.
·the machine is equipped with taper clutch, with the charactristics of strong transmission troque, easy operation and free of maintenance.
·for the winch, we use large module planetary gear and add supporting frame, greatly increasing hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core machine is rigid enough for gravel layer and other complex geological conditions.
·we are the first one to equip mud pump with the flow 160L/min in China so that it will save cost and also make the machine compct, moblie and light in weight.
3.Technical parameters of HZ-200Y hydraulic core drilling rig
HZ-200Y hydraulic core drilling rig
Drilling depth 200m
Max open hole caliber 300mm
End hole caliber 75mm
Drill rod caliber 60mm
Drilling angle 90°-75°
Drill weight(without power) 1100kg
Triangle conveyer belt B950*4 B1700*3
The main machine moving distance 300mm
Power Diesel engine 22HP Electric motor 15kw
Spindle
Spindle speed 64/128/287/557 r/min
Spindle stroke 450mm
Hoist
Max.lifting capacity 2400kg
Single line lifting speed 0.41/ 0.82/1.64 m/s
Wire rope caliber 13mm
Wire rope length 35m
Hug floodgate caliber 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3Mpa
Work pressure 1.5Mpa
Inlet pipe caliber 40mm
Outlet pipe caliber 30mm
Triangle conveyer belt B1728mm
Mud pump
Type CBTF314
Triangle conveyer belt B1100Ã? 1
1. Characteristics of XYX-200 wheeled hydraulic core drilling rig
·hydraulic cylinder, high efficiency
·wheeled walking mechanism, very convenient for transport and adjusting the drilling rig level.
·pressure gauge display the condition of the bottom of the drill hole.
·the drilling rig is equipped with a ball card holding mechanism instead of chuck, and it can be operated without stopping the rod.
·the working efficiency is high and the operation is convenient, safe and reliable.
2. Technical parameters of XYX-200 wheeled hydraulic core drilling rig
XYX-200 wheeled hydraulic core drilling rig
Drill hole depth 200m
Maximum opening diameter 300mm
Final hole diameter 75mm
Drill pipe diameter 60mm
Borehole inclination 90°-75°v
Rig weight (without power) 1300kg
Trigonometric belt B950*4 B1700*3
Active moving distance 300mm
Power Diesel engine/motor 22hp/16.2kw
A vertical scroll of painting
Shaft rotation speed 64/128/ 287/ 557 r/min
Vertical axis stroke 450mm
Windlass
Maximum lifting weight of single rope 2400kg
Single rope lifting speed 0.41/ 0.82/1.64m/s
Wire rope diameter 13mm
Wire rope capacity 35m
Hug floodgate caliber 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single cylinder double action
Maximum displacement Diesel engine 170L/min
Matching motor 150L/min
Maximum pressure 3Mpa
Work pressure 1.5Mpa
Inlet pipe caliber 40mm
Outlet pipe caliber 30mm
Triangle conveyer belt B1728mm
Type CBT-F-314
Triangle conveyer belt B1100*1
1. Characteristics of XYX-3 wheeled hydraulic core drilling rig
·The drilling rig is equipped with wheeled walking mechanism and hydraulic cylinder support, which is convenient for the whole machine to be relocated and easy to adjust the level of the drilling rig.
·Using the ball card holding mechanism to replace chuck,can implement non-stop down rod,convenient operation,safe and reliable.
·With oil pressure feeding mechanism to improve drilling efficiency
·The pressure gauge is provided with the pressure gauge of the bottom of the hole, so it is easy to master the hole in the hole.
·The lifting and falling tower is hydraulic operation, which is convenient and reliable.
·The diesel engine uses electric start to reduce the labor intensity of the worker.
2. Parameters of XYX-3 wheeled hydraulic core drilling rig
Drilling depth 100/ 250 / 300/ 600 m
Maximum opening diameter 300 / 200 /150 / 75mm
Max open hole caliber 300mm
Final hole diameter 75mm
Drill pipe 60mm
Borehole inclination 90°-65°
A vertical scroll of painting
Vertical rotation speed of vertical axis 30-1050r/min
Vertical reversal speed 29-137r/min
Vertical axis stroke 560mm
Diameter of shaft inner hole 96mm
Vertical axis lifting capacity 60kn
Main hoist (hydraulic drive)
Single rope lifting speed 0-45m/min
Wire rope diameter 14mm
Band width 90mm
Drum diameter 300mm
Reel capacity 30m
Maximum lifting capacity of single rope 40kn
Auxiliary hoist (hydraulic drive)
Drum diameter 140mm
Diameter of steel wire 6mm
Reel capacity 450m
Mud pump
Mud pump BW-250 Horizontal three cylinder
Flow 250 l/min
Working pressure 7mpa
Inlet diameter 75mm
Outlet diameter 50mm
Gear oil pump
Double oil pump CBF-F63/25
Front-end flow pressure 63 l/min 20mpa
Backend flow pressure 25 l/min 20mpa
Rig power
Diesel engine FAW Xichai 4 cylinder
Electric machinery Y180L-4 22KW
Wheeled chassis
Bearing capacity of wheel chassis 3.5t
Wheel chassis length 2.6m
Wheel chassis width 2m
Wheel chassis height 0.6m
1. Characteristics of XY-44A hydraulic core drilling rig
XY-44A is a hydraulic core drilling rig suitable for high-speed medium and deep borehole drilling in complex rock formation. HuaxiaMaster core drilling rigs covers all the main foundation and drilling technologies with a range of models whose characteristics, capability and performance find application in every operating condition.
2. Applications of XY-44A hydraulic core drilling rig
·Core drilling rig
·Engineering geology exploration,
·hydrology and core drilling
·large diameter foundation piles construction
3. Parameters of XY-44A hydraulic core drilling
rig
XY-44A hydraulic core drilling rig
Drilling depth 600-1400m
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60mm
Drilling angle 90-65
Drill rig moving stroke 450mm
Spindle
Spindle speed ( Diesel Engine) Forward 60 97 169 187 276 301
284 487 521 847 1180 1490r/min
Reverse 65 201r/min
Spindle speed ( Electric Motor) Forward 50 81 141 155 230 251
320 406 434 706 984 1247r/min
Reverse 54 167r/min
Spindle stroke 600mm
Spindle max. pressure force 90kn
Spindle inner diameter 96mm
Lifting capacity 120kn
Main hoist
Max.single line lifting capacity 45kn
Max.single line lifting speed 0-45m/s
Wire rope caliber 17.5-18.5mm
Hoist capacity of wire line 90-110m
Roller diameter 140mm
Wirerope diameter 6mm
Wire rope length 450m
Mud pump
Type BW-250
Displacement 250 l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75 mm
Water outlet pipe diameter 50 mm
Power
Diesel engine YC4E135-1 81KW
Electric motor Y225S-4 37KW
1. Characteristics of XY-8 hydraulic core drilling rig
·Machine adopts pneumatic shift Fastgear 8JS118 auto transmission and clutch, compact structure, smooth operation, stable performance, good wild card.
·Using auto-control flexible-shaft shift agency, we achieve the long-distance transmission shift. The pneumatic shift is light and agile, and has the advantage of hommization.
·Reasonable speed range and many speed radixes (8 forward speed, 1 reverse speed), with low-speed it has big torque (Max. up to 8000N.m).
·Using concentrated forced lubrication system, as long as the rig runs, the separate lubrication oil pump starts working and sends lubrication oil to each node that requires lubrication. When the oil lubricates drive mechanism, it will also take away the heat inside, (lubrication system with separate condenser), to prevent the components from heat caused by high-speed high-load state.
·hydraulic oil is supplied by gear oil pump, less power consumption, and the hydraulic system oil temperature is low and stable work. The system is equipped with a hand pump. When power machine can not work, workers can still use hand pump to lift tools from the bottom of the hole, in order to avoid burying accidents
·Advanced and compact structure, reasonable layout, all components are revealed outside, do not overlap, ease of maintenance, maintenance and repair.
·The rig has a low center of gravity and long backward stroke (up to 530mm). Easy to be fixed on tower base, the rig has good stability in high-speed drilling.
·With shockproof meter, its easy to observe hole situation. Control-handles are in reasonable layout, operation is flexible and reliable.
2. Parameters of XY-8 hydraulic core drilling rig
Drilling angel 0-360°
Electric motor Y280S-4 /75KW
Diesel engine YC6A240-33/ 177KW
Spindle 96mm
Shanxi Fast Gear 8JS118 transmission and ancillary clutch, safe and reliable.
Oil pump type/ model gear oil pump/ CB-32
core speed 2500r/min
Displacement 32 ml/r
Work pressure 20mpa
Max.pressure 25mpa
Direction of rotation Right(see from shaft end)
Work core speed 700-1800r/min
Single rope compensational speed 3-8m/s
Single rope compensational load 45kn
Form skids type(with sliding base)
Rig backward stroke 530mm
Dimensions(L*W*H) 3800*1500*2460mm
Rig weight 6500kg
1.Brief introduction of QTZ-3 soil sampling drilling rig
QTZ-3 soil sampling drilling rig is more humanized and more suitable for researchers in scientific research institutions or universities. The power is further strengthened, which can meet the requirement of soil sampling for 15-20 meters depth.
2.Applications of QTZ-3 soil sampling drilling rig
·Geotechnical engineering investigation; environmental soil survey; agricultural soil survey.
·Ground water survey; coastal geological survey; wetland environment investigation.
·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling.
3. Technical parameters of QTZ-3 soil sampling drilling rig
QTZ-3 soil sampling drilling rig
Power power 3.8hp
lighter way back flush pull rope
oil consumption 0.6 l/h
Impact times 2460 r/min
Impact energy 35j-70j
Core depth 15m-20m
Host weight 26kg
1.Brief introductions of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work.
2.Features of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. .
3.Applications of SH30-2A exploration drilling rig
The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function.
4.Impact tool of SH30-2A exploration drilling rig
The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler.
Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c
5.Rotary tool (Not include in standard configuration).
Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter,
6.Specifications of SH30-2A exploration drilling rig
SH30-2A exploration drilling rig
Drilling depth 30m
Drilling pipe diameter 42mm
Aperture diameter 142mm
End hole diameter 110mm
Drill form and vertical height 4 legs, 6m
Power
Motor Y132S2-2/ 7.5kw/3000 r/min
Diesel engine D180Z/ 8hp/2400 r/min
Windlass
Lifting speed 0.24/ 0.57/1.48m/s
Maximum lifting power (single rope, low speed) 15kn
Turntable
Diameter 150mm
Turntable speed 18/44/110r/min
Dimension
Length*width*height 1780*1010*900mm
Weight 500kg
1.Features of KY-150 hydraulic exploration drilling rig for metal mine
KY-150 hydraulic exploration drilling rig for metal mine is easy to disassemble and convenient to transport. The drilling rig has flexible arrangement, and the drilling pipe can be dismantled mechanically, which can reduce labor cost and improve work efficiency. Also the rig has infiniTely variable speeds.
KY-150 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe to control the rig through the operation platform. The spindle of the gyration adopts the through hole structure. The length of the drill pipe is not restricted by the drilling rig, and it can also be applied to diamond wire-line coring drilling.
KY-150 hydraulic exploration drilling rig for metal mine uses full hydraulic operation to make the structure more reasonable to make the function more complete. It uses variable motor which has wide speed regulating range. This drilling rig applies to high speed drilling of alloy steel stone and hard alloy drilling at low speed, and it is suitable for any inclination drilling in the tunnel or surface drilling.
2.Components of KY-150 hydraulic exploration drilling rig for metal mine
The KY-150 hydraulic exploration drilling rig for metal mine adopts the structure of full hydraulic power head, and consists of three parts: main engine, pump station and operating floor.
3.Specifications of KY-150 hydraulic exploration drilling rig for metal mine
Borehole diameter 36.5mm/46.5mm
Drilling depth 150ï¼?Ï?33 steel drill pipeï¼?/120ï¼?Ï?43 steel drill pipeï¼?/150(Ï?43 aluminum alloy drill pipe)
Borehole angle 0°-360°
Spindle speed 400-1400 r/min
Spindle output torque 87-300 n.m
Rated pull force 30 kn
Rated pull speed > 0.3 m/s
Oil supply mode double gear pump
Hydraulic oil mode antiwear hydraulic oil YB-N46/YB-N32 (winter)
Motor model manual variable motor A6V55MA
Motor specifications Y180M-4/18.5 kw
Equipment weight main engine166kg/backbone 40kg/operation floor 86kg/power car 210kg
1.Introduction of JDL-300 mud/air drilling rig
JDL-300 mud/air drilling rig is a water well drilling rig that mix mud drilling rig and air drilling rig in one equipment with mechanical top head. It is a good solution to the difficulty of drilling in the soil layer for DTH rig and the low efficiency of drilling for mud rotary rig in the hard rock, gravel and pebble layer. The mud/air drilling rig adapts to various soil strata. The mud/air drilling rig is efficiency and energy saving to drill water well and geological exploration of core sample.
2.Features of JDL-300 mud/air drilling rig
·The rig can be equipped with a five-speed manual integrated gearbox, hydraulically separated bearings, full synchronizer shifting, high reliability and long service life.
·The drilling rig adopts a mechanical winch, which has a fast lifting speed and is easy to handle the bottom hole accident.
3.Parameters of JDL-300 mud/air drilling rig
JDL-300 mud/air drilling rig
Working stratum Loose soil layer and bed rock(hardness:F6~20)
Drilling
method Mechanical top head rotation, hydraulic feeding,
work with mud pump or DTH.
Drilling
capacity Φ42 Mud drilling depth 530m
NQ wireline coring 600m
Φ75 Air Drilling depth 300m
Borehole dia. �Φ350
Power Diesel engine model YN27
Rated power 42kw
Rated speed 2400rpm
Drive
head Rotary speed 50~10200r/min
Max. torque 5000N.m
Feeding
system Lifting capacity 4T
Thrusting capacity 2.1T
Winch
capacity Hydraulic tool winch(optional) 1.5T
Mechanical winch 4.5T
Drill
pipe Drill pipe dia. Φ76/Φ89/Φ102
Drill pipe length 3000mm
Crawler
chassis Walking speed 0~2km/h
Climbing angle 20°
Dimension Transport 5380*1575*2500mm
Working 3480*1575*6280mm
4380kg
Air
compressor Air pressure 10.5~24.6bar
Air consumption 16~35m³/min
The above parameters are subject to change without prior notice.
Shandong Master Machinery Group specializes in mud/air drilling rig. The main models are JDL-300 and JDL-400.
1.The applications of KQZ-180D pneumatic water well drilling rig
KQZ-180D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has the advantages of large diameter, deep drilling, fast track, flexible movement and wide use.
2.The specifications of KQZ-180D pneumatic water well drilling rig
Drilling hole diameter 100-219mm
Drilling depth 150m
Drilling angle ground to 45-90°
Feed stroke 1500mm
Motor power 7.5kw
Rotary speed 0-78rpm
Wind pressure 0.8-2.1mpa
Air consumption 13-21L/min
Gross weight 600kg
1.The brief introductions of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig is suitable for drilling and geothermal drilling. It has many advantages, such as large diameter, deep drilling, fast footage, flexible movement and wide application area.
2.The specifications of KQZ-200D pneumatic water well drilling rig
KQZ-200D pneumatic water well drilling rig
Borehole diameter mm 100-254
Borehole depth m 200
Drilling angle ° 45-90
One-time feed stroke mm 1500
Motor power kw 11
Diesel engine power hp 8.5
Rotating speed of drilling tools rpm 52
Air pressure mpa 1.45-2.5
Air consumption l/min 15-27
Total weight kg 650
1.The applications of FY300 crawler pneumatic water well drilling rig
·civil engineering drilling
·geothermal drilling,
·drilling with large diameter and deep drilling footage
·Its fast, flexible and efficient
2.The specifications of FY300 crawler pneumatic water well drilling rig
Model FY300
Gross weight t 8.8
Dimension mm 4350*1850*2750
Aperture mm 140-325
Drilling depth m 300
Feed stroke mm 6000
Travel speed km/h 2
Grade ability max. 30°
Rising height from ground mm 230
Wind pressure mpa 1.7-3.3
Air consumption m³/min 23
Engine power kw 85
Rotary speed rpm 55-115
Rotation torque n.m 7200-8500
1.The features of SPJ-300 water well drilling rig
·SPJ-300 water well drilling rig is powered by electric motors.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc..
·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device
2.The specifications of SPJ-300 water well drilling rig
Borehole diameter 500mm-1500mm
Drilling depth 300m
Maximum output torque 18kn.m
Active drilling pipe 108*108*12mm
Drilling pipe 89mm
Main windlass lifting power 30kn
Assistantwindlass lifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
Height of the drilling tower 13m
Gross weight (excluding drill rod) 9t
External dimension 2200*6000*13000mm
Drilling tower Type A / hydraulic drill tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1. Purpose of HZQ-20 gasoline engine concrete core drilling rig
HZQ-20 gasoline engine concrete core drilling rig adopts high-speed cutting technology and is matched with thin-walled diamond drills. It is widely used in drilling and coring in engineering construction, municipal engineering, equipment installation engineering and building quality inspection. On the concrete, asphalt pavement and limestone roads such as highways, airports, ports and dams, the cores are subjected to compression and flexural tests. The coring and open hole is used to drill anchor bolt hole for large-scale machine equipment, and bridge handrails and traffic safety protection.
2. Features of HZQ-20 gasoline engine concrete core drilling rig
Double column structure and spiral feeding mode are adopted with good stability and simple operation and labor saving. The rig is equipped with wheel, which is easy to move.
The use of high-speed cutting technology and thin-wall diamond drill supporting can drill and cut high strength reinforced concrete with high drilling efficiency, accurate hole location, hole wall smooth, good hole quality, complete core smooth, small vibration, no damage to the building.
3.Parameters of HZQ-20 gasoline engine concrete core drilling rig
·Drilling diameter: 200mm (if larger hole size is needed, please specify)
·Drilling depth: 700mm (greater depth can be drilled with connecting rod or extended mandrel)
·Engine: gasoline engine
·Power: 5.5 HP, 9.0 HP, 13 HP and 20 HP
·Output speed: 800-1500 RPM
·Weight: 180KG
Shandong Master Machinery Group specializes in the supplying of concrete drilling and coring machine. The main models are HZQ-20 gasoline engine concrete core drilling rig, HZC-20 diesel engine concrete core drilling rig, HZQ-20T towed concrete core drilling rig.
1.Brief introductions of QZ-1A two phase electric sampling drilling rig
QZ-1A is a two phase electric sampling drilling rig produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for all kinds of geological exploration, like industrial and civil buildings, bridges, railways, roads and so on. QZ-1A two phase electric sampling drilling rig is only 80kg; height is less than 2 meters, and the drilling rig can been break down structure. Hence it is easy to move and operated.
2.Technical parameter s of QZ-1A two phase electric sampling drilling rig
QZ-1A two phase electric sampling drilling rig
Borehole diameter (mm) 32-46
Drilling depth (m) Soil layer: 20-25
Lithosphere: 15-20
Drilling pipe diameter (mm) 25
Rotate speedï¼?r/minï¼? 175
Torque (n.m) 80
Power (kw) 1.5
Dimensions (l*w*h) 600mm*450mm*1900mm
Weight (kg) 80
3.Configuration list of QZ-1A two phase electric sampling drilling rig
Item Parameters Unit Quantity
Two phase electric sampling drilling rig QZ-1A set 1
Drill pipe(mm) 25*1500 pc 6
Drill pipe(mm) 25*800 pc 8
Joint(mm) 32 pc 14
Core barrel(mm) 32*800 pc 1
Alloy bit(mm) 32 pc 1
Reducing nipple(mm) 45/32 pc 1
Core barrel(mm) 45*800 pc 1
Alloy bit(mm) 46 pc 1
Three-wing bit(mm) 60 pc 1
Safety clamp pc 1
Water seal Y Type 30*45*8 pc 4
Control wheel set 1
1.Brief introduction of QZ-2A three phase electric sampling drilling rig
QZ-2A is a three phase electric sampling drilling rig , produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for industrial and civil buildings, bridges, railways, roads, utilities and other sectors of the geological exploration.
2. Technical parameters of QZ-2A three phase electric sampling drilling rig
QZ-2A three phase electric sampling drilling rig
Borehole diameter (mm) 32-91
Drilling depthm soil9110-15m
stone915-10m
stone7510-15m
stone6015-20m
stone4620-25m
Drilling pipe diameter (mm) 28
Rotate speedr/min 185-380
Torquen.m 80
Powerkw 3
Dimensionl*w*h 600*450*1900
Weightkg 95
3. Configuration list of QZ-2A three phase electric sampling drilling rig
Item Parameter Unit Quantity
Three phase electric sampling drilling rig QZ-2A platform 1
Drilling pipe 28*1500 pc 6
Drilling pipe 28*800 pc 8
Drilling joint 35 pc 14
Reducing nipple 45/35 pc 1
Core barrel 45*800 pc 1
Alloy bit 46 pc 1
Reducing nipple 58/35 pc 1
Core barrel 58*800 pc 1
Alloy bit 60 pc 1
Three-wing bit 0 pc 1
Safety clamp hold 1
Water seal Y30*50*10 pc 4
Oil seal 17*50*10 pc 2
Control wheel set 1
1.Brief introductions of YQZ-30 hydraulic core drilling rig
YQZ-30 hydraulic core drilling rig is a small portable diesel oil drilling machine. It is mainly used for prospecting and exploration, geophysical exploration,drilling engineering such as road construction and blasting hole, shallow oil, natural gas and groundwater drilling. It also can be used for engineering drilling of dam grouting and tunnel ventilation and drainage. The drilling depth of YQZ-30 hydraulic core drilling rig is 30 meters. The open hole diameter is 89mm, and the final hole diameter is 75mm.
2.Features of YQZ-30 hydraulic core drilling rig
·Oil pressure automatic feeding mechanism, high drilling efficiency.
·Using the upper ball clamp mechanism, non-stop re-chuck
·Handles are centralized, easy to operate, safe and reliable.
·Compact structure, small floor space.
·The shell of drill rig and gearbox are made of aluminum. The shell reduce the weight of the fuselage.
· Easy to decomposition and move, suitable for working in hilly terrain, mountainous areas and other complex terrain.
3. Technical parameters of YQZ-30 hydraulic core drilling rig
Main engine
Drilling depth 30m Drill pipe diameter 42mm
Open hole diameter 91-110mm End hole diameter 75 mm
Drilling rig weight 198kg(No power) Drilling rig dimension 1400*600*1055mm
Windlass
Maximum hoist capacity 4kn Coiling block diameter 90mm
Wire rope diameter 8mm Maximum length 18m
The band type brake diameter 200mm The band type brake width 35mm
Vertical shaft
Rotating speed 136/338/578r/min Stroke 400mm
Maximum pressure 8kn Lifting power 10kn
Oil pump
Model YBC20/125 Rated pressure 12.5Mpa
Rate of flow 20ml/r Rated rotate speed 1500r/min
Power
Diesel engine R180 Cooling type water-cooling
Rated power 5.67KW Rated rotate speed 2600r/min
4.Configuration list of YQZ-30 hydraulic core drilling rig
Item Specification Unit Quantity
Hydraulic core drilling rig YQZ-30 Platform 1
Drill pipe including joint 42 m 30
Reducing nipple joint 57/57 pc 2
Reducing nipple 89*57 pc 1
Opening pipe 89 pc 1
Alloy bit 91 pc 1
Reducing nipple 73 pc 1
Core barrel 73 pc 1
Diamond bit 75 pc 1
Water pump diesel engine power set 1
Drill tower 3m set 1
Wire rope 10mm m 20
Rope cappel pc 4
U shape ring pc 1
Flat square main rod 2m/pc pc 1
Reducing nipple for main rod pc 1
Water faucet pc 1
Lifter pc 1
U-fork 57 pc 1
Safety clamp 57 pc 1
Pliers 24 pc 1
L-wrench 73/89 pc 2
1.Applications of HZ-200YY hydraulic core drilling rig
HZ-200YY hydraulic core drilling rig is mainly used for geological general investigation and exploration, road and tall building foundation exploration, holes in concrete structure, river levees, civil water wells and ground temperature central air-conditioner.
2. Features of HZ-200YY hydraulic core drilling rig
·the highest speed can reach 1045r/min with 5 gears, which improves drilling efficiency
·adopted 53*59 drilling rod, which has high rigidity and strong delivery torque.
·equipped with taper clutch, made the machine easy to operate and free of maintenance.
·using large module planetary gear and adding supporting frame, which highly increased hoisting and braking ability of the winch.
·vertical spindle are fixed by four groups of bearings to ensure that the core drilling rig is rigid enough for gravel layer and other complex geological conditions.
3. Technical parameters of HZ-200YY hydraulic core drilling rig
Max open hole diameter 300mm
End hole diameter 75mm
Drill rod diameter 60mm
Drilling angle 90
Drill weight (without power) 975kg
Triangle conveyer belt B950 * 4; B1700 * 3
Main drilling rig moving distance 300mm
Power Diesel engine 22HP
Electric motor 15kw
Spindle
Spindle speed 64/128/287/557r/min
Spindle stroke 450mm
Hoist
Max. lifting capacity 2400kg
Single line lifting speed 0.41/0.82/1.64 m/s
Wire rope diameter 13mm
Wire rope length 35m
Reel diameter 140mm
Hug floodgate diameter 260mm
Hug floodgate belt width 70mm
Mud pump
Type Horizontal single-urn twin-action
Displacement Diesel engine 170L/min
Electric motor 150L/min
Maximum pressure 3mpa
Work pressure 1.5mpa
Inlet pipe diameter 40mm
Outlet pipe diameter 30mm
Triangle conveyer belt B1728mm
1. Applications of XY-180 hydraulic core drilling rig
The XY-180 hydraulic core drilling rig is designed on the basis of the XY-1A hydraulic core drilling rig. It is a low speed and high torque portable drilling machine with oil pressure.
This drill rig is suitable for engineering geological survey of railway, hydropower, traffic, bridge, dam foundation and other buildings, geological core drilling and physical investigation, drilling holes for small holes and blasting holes, a small water well drilled.
3.Parameters of XY-180 hydraulic core drilling rig
Drilling depth 180/150/120/90/70/30
75/91/110/130/150/300
Maximum opening diameter 375
Drill pipe diameter 42/50
Spindle speed (r/min) 71/142/310/620
Spindle stroke 450
Upgrading ability (KN) 15
Diameter of steel wire 12
Type gear pump
Model YBC-12/80
Rated pressure (MPa) 8
Rated speed (r/m) 1500
Displacement 8
Power supply ZS1115 diesel engine and 15kw motor
1. Applications of XY-200 hydraulic core drilling rig
Geological survey, geophysical exploration, road and high-rise building foundation exploration, wells, blasting holes and other drilling projects.
2. Parameters of XY-200 hydraulic core drilling rig
Maximum opening diameter 400mm
Maximum borehole depth 200m
Diameter of the end hole 75mm
Borehole dip angle 90-75°
Machine overall size 2.75*0.95*1.60m
Drill pipe diameter 50mm
Weight of drill rig diameter of drill pipe (without power) 760kg
A vertical scroll of painting
Shaft rotation speed 71/142/310/20r/min
Vertical axis stroke 450mm
Windlass
Maximum lifting weight of single rope 2008kb
Drum lifting speed 17/35/75/160 rm/s
Wire rope diameter: 13mm
Wire rope capacity 35mm
Width of sluice 70mm
Mud pump
Type: horizontal single cylinder double action flow
Maximum pressure 1.5mpa
Working pressure 0.7mpa
Inlet size 50mm
Outlet pipe diameter 45mm
Power
Diesel oil 22hp
Rated speed 2200r/min
Electric machinery 15kw
Rated speed 1460r/min
1. Features of XY-3 hydraulic core drilling rig
·XY-3 hydraulic core drilling rig adopts CG140 model auto transmission, has 10 rotation speeds and reasonable speed range, with eight forward rotation gears and two reverse rotation gears, high speed, strong stroke and wide scope of application
·Large torque, strong bearing capacity, can realize long distance control speed change, operation centralized and convenient
·Large engine power and two reverse rotation gears, can easily solve the water well drilling work accident.
·Equipped with normally closed hydraulic chuck, operation is flexible and reliable
·The independent operation of the vertical shaft and the hoist can be realized
·The diameter of the vertical shaft through the hole is large and can be replaced with a large six party active drill rod
2. Parameters of XY-3 hydraulic core drilling rig
XY-3 hydraulic core drilling rig
Drilling depth 600m
Borehole diameter 300-75mm
Max open hole caliber 300mm
End hole caliber 75mm
Drilling rod diameter 60
Drilling angle 90°-65°
Spindle
spindle speed 30-1050r/min
Spindle stroke 29-137r/min
Spindle stroke 60mm
Spindle inner diameter 96mm
Lifting capacity 6000kg
Hoist
Max.single line lifting speed 0.5-1.9m/s
Wire rope caliber 12.5mm
Max.single line lifting capacity 4000kg
Reel diameter 300mm
Wire rope length 50m
Maximum lifting capacity of single rope 3000kg
Mud pump
Type Horizontal three cylinder BW-250
Displacement 250l/min
Work pressure 80kg/cm²
Water inlet pipe diameter 75mm
Water outlet pipe diameter 50mm
Gear oil pump
Duplex gear oil pump CBF-F63/25
Front displacement, pressure 63l/min 20mpa
Water outlet pipe diameter 25l/min 20mpa
Power
Diesel engine 39kw
Electric machinery 22kw
Weight size
Drill weight 1800kg
Shape size 2500*900*1800mm
1. Brief introductions of QTZ-1 soil sampling drilling rig
QTZ-1 soil sampling drilling rig is comparable to a huge hydraulic and pneumatic drilling rig. The drilling rig is a dynamic gasoline driller used for soil sampling, The rig uses gasoline power and is simple in operation. The rig is safe and stable in performance. It can greatly reduce the labor force, taking into account the rapid and simple sampling speed.
2.Applications of QTZ-1 soil sampling drilling rig
·Geotechnical engineering investigation,environmental soil survey,agricultural soil survey.
·Groundwater survey,coastal geological survey,wetland environment investigation.
·Tailing pond investigation, archaeological investigation, physical chemistry and secondary halo sampling.
3. Technical parameters of QTZ-1 soil sampling drilling rig
QTZ-1 soil sampling drilling rig
Power power 2.8hp
fire mode backflush pull rope
oil consumption 0.5l/h
Impact times 1500r /min
Impact energy 20J-55J
Core depth 5m-10m
Host weight 23kg
1.Brief introductions of KY-200 hydraulic exploration drilling rig for metal mine
KY-200 hydraulic exploration drilling rig for metal mine is widely used for tunnel and surface geological exploration and can drill the hole from any angle. The KY-200 hydraulic exploration drilling rig for metal mine adopts the structure of all hydraulic power head and consists of three parts: main engine, pump station and operation floor. The hydraulic exploration drilling rig for metal mine is easy to disassemble and is convenient to transport. The drilling rig arrangement is flexible. Drilling pipe screwing and unscrewing is mechanized. It can save labour cost and improve work efficiency. And it has infinitely variable speeds.
KY-200 hydraulic exploration drilling rig for metal mine has the function of linkage. It is simple and safe through controlling the operation floor. The spindle of the gyration adopts the through hole structure. The length of the drill rod is not restricted by the drilling machine, and it can also be applied to the diamond wire-line coring drilling.
2.Specifications of KY-200 hydraulic exploration drilling rig for metal mine
Drilling pipe diameter (mm) 33 43 Output torque (n.m) 81-295
Borehole depth (m) 200 160 Feed capability(kn) 27
Feeding stroke (mm) 850 Pullout capability (kn) 20
Spindle speed (r/min) 600-2000 Motor power (kw) 22
1.Brief introductions of SJD-2A portable electric water well drilling rig
electric water well drilling rig are widely used in household/factory water wells, irrigation Wells, installation of water air conditioning, construction piling and so on.
The electric water well drilling rig bit produced by the company can be optionally equipped with drill bit, the price of drill bit is calculated separately.It can also be equipped with a drill pipe, with a diameter of 32mm and the length about 1.8m.
2.Features of SJD-2A portable electric water well drilling rig
The whole machine is about 8KG, and it is easy to carry.Power 220V electric ,household two-phase electrical lighting, motor power 1200W or 1500W.The motor can be multi-stage variable speed, positive and negative, and easy to operate.The well drilling depth can reach 50 meters, the wellhead diameter is 50-180mm, the general drill bit 50-180mm, the special specification can be customized.The diameter of the drill pipe is 32mm or 42mm and a length is 1m to 2m.
1.The features of SPJ-400 water well drilling rig
·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower.
2.The specifications of SPJ-400 water well drilling rig
Borehole diameter 500mm-1800mm
Drilling depth 400m
Maximum output torque 18kn.m
Active drill rod 108*108*12mm
Drilling pipe 89mm
Main indlasslifting power 30kn
Assistant windlasslifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
height of the drilling tower 13m
Gross weight (excluding drill pipe) 9t
External dimension 2200*6000*13000mm
Drilling tower type A / hydraulic drilling tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.
1.Brief introductions of KHYD75 electric rock drilling rig
·electric rock drilling rig can be fitted with drilling stand, and can be drilled horizontally or inclined upward.
·In order to prolong the service life of the drill bit and improve the working conditions of the operator, wet drilled water can be used to discharge the powder and screw blade drills can also be used for dry draining.
·In drilling operations, we only need to operate the handwheel, and the electric motor rock drilling rig can advance and return quickly.
2.Specifications of KHYD75 electric rock drilling rig
Model Unit KHYD75
Rated output power of electric motor kw 3
Rated voltage of electric motor v 380/660
Rated frequency of electric motor hz 50
Rated current of electric motor a 6.8/3.9
Motor rotating speed r/min 1420
Working mode continuity
Drilling speed mm/min 320
Rig return speed m/min
Borehole diameter mm 42(rockï¼?
Hardness range protodikonov`s scale of hardness f
1.Brief introductions of ZLJ350 grouting reinforcement drilling rig
ZLJ350 grouting reinforcement drilling rig is mainly used for grouting reinforcement hole. ZLJ350 grouting reinforcement drilling rig work for under mine, tunnel, subway, slope support. The drilling rig can work different angles of grouting reinforcement and drilling hole.
This drilling rig adopts mechanical drive, hydraulic feed with small size, light weight, The rig is reliable and convenient to operate.
2.Specifications of ZLJ350 grouting reinforcement drillinDrilling Rigg rig
Drilling diameter 50-113mm
Drill rod caliber 42mm
Noncoring bit 50-113mm
Core bit 56-113mm
Vertical rated speed 340 /192/112 r/min
Vertical shaft torque rating 130/ 230 /400 n.m
Main shaft angle 0-360
Spindle stroke 400mm
System pressure rated 8mpn
Feed force 9kn
Elevating power 12kn
Winch lifting capacity 7.35kn
Capacity of drum 26.8m
Diameter of wire rope 8.85mm
Oil pump type YBC-12/80
Motor power 5.5kw
Dimension 1230*630*1280mm
Total weight 430kg
1.The brief introduction of 13.5 meters wheeled rotary pile drilling rig
13.5 meters wheeled rotary pile drilling rig is a kind of rotary pile drilling rig, which is suitable for building construction foundation. It is widely used in the construction of various soil layers, such as sand, clay, silty soil and so on. At the same time, it is widely used in the construction of cast-in-place piles, continuous walls, foundation reinforcement. The small rotary drilling rig has the characteristics of low noise, small vibration, large torque, muti-function, fast drilling speed, flexible in operation, high construction efficiency, various speed regulation, electronic automatic monitoring.These characteristics gradually replace some traditional piling and drilling equipment.
2.The technical parameters of 13.5 meters wheeled rotary pile drilling rig
Model XWL-13.5
Work pattern oil cylinder force wire rope deadweight
Drilling hole diameter mm 500-1500mm
Drilling depth m 13.5 10-26
External dimension m 7.7*2.2*3.0
Weight t 8
Tire type / 900-20
Engine model / 4108
power kw 88
rotating speed r/min 2400
Power head torque kn.m 17000-22000
Power head rotating speed r/min 30-50
Maximum lifting power kn 150
Maximum stroke m 11-22
Wire rope diameter mm 16
Rotation angle ° 180
Moving speed km/h 20-30
Maximum grade ability ° 25-30
(In the continuous improvement of products, technical parameters are based on practical consultation.)
1.The range of application of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod is suitable for soil layer, clay layer, fill layer, silt layer, silt layer and some strata containing pebbles, gravel and strong weathered rock. It is widely used in building construction,, high speed rail contact network support, slope protection pile, city construction, civil building, new rural construction, power grid transformation, garden greening and many other projects.
2.The characteristics of 15 meters crawler rotary pile drilling rig with square power rod
High efficiency and energy saving hydraulic system, large torque full hydraulic power head, 360 degrees of free rotation, wide application, high construction efficiency, stable performance, environmental protection and energy saving and other advantages, deep pile driving, fast speed convenient displacement. compared with large rotary drilling rig,This drilling rig has the characteristic of low cost of purchase, low cost of transportation, quick income. These characteristic shows its economy and engineering adaptability.
3.The technical parameters of 15 meters crawler rotary pile drilling rig with square power rod
The 15 meters crawler rotary pile drilling rig with square power rod adopts two kinds of drilling models, self weight pressure and cylinder pressure, which can achieve 5-15 meters deep and using different sizes of drilling tools, the maximum diameter of pile holes can reach 1500mm.
Item Unit Parameters
XWDF-15 crawler rotary pile drilling rig with square power rod
Working mode cylinder pressure wire rope deadweight
Drilling hole diameter mm 500-1500
Drilling hole depth m 15 10-26
Dimension m 8.7*2.3*3.1
Weight (excluding drilling tools in standard configuration) t 13
Maximum torque of power head kn.m 26000
Power head rotating speed r/min 20-40
Turntable rotation angle Full gyration
Maximum moving speed km/h 2.6
Maximum grade ability ° 25
Engine model / 6105 medium cold turbocharging in Weifang
Engine power kw 145