1.The features of SPJ-400 water well drilling rig
·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area.
·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling.
·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower.
2.The specifications of SPJ-400 water well drilling rig
Borehole diameter 500mm-1800mm
Drilling depth 400m
Maximum output torque 18kn.m
Active drill rod 108*108*12mm
Drilling pipe 89mm
Main indlasslifting power 30kn
Assistant windlasslifting power 20kn
Rotary table latus rectum 500mm
Rotating speed (forward and inversion) 40/70/128r/min
height of the drilling tower 13m
Gross weight (excluding drill pipe) 9t
External dimension 2200*6000*13000mm
Drilling tower type A / hydraulic drilling tower
This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.
1.The features of SPJ-400 water well drilling rig ·SPJ-400 water well drilling rig is powered by diesel engine, and can also be driven by motor in electric power area. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usageis: the hydrogeological conditions at the bottom of the exploration and survey; the drilling and drilling for the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate. Use winch system to realized ecompression drilling, lifting drilling,down pipe, impact sampling, vertical drilling tower. 2.The specifications of SPJ-400 water well drilling rig Borehole diameter 500mm-1800mm Drilling depth 400m Maximum output torque 18kn.m Active drill rod 108*108*12mm Drilling pipe 89mm Main indlasslifting power 30kn Assistant windlasslifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min height of the drilling tower 13m Gross weight (excluding drill pipe) 9t External dimension 2200*6000*13000mm Drilling tower type A / hydraulic drilling tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on.
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-600 water well drilling rig SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers. The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-600 water well drilling rig Drilling depth 600m Borehole diameter 500mm-2500mm Rotary table latus rectum 605mm Active drillingpipe 108*108*12mm Drilling pipe 89mm Rotary speed 42/75/134kn.m Main windlass single rope lifting power 35kn hook rated load 210kn hook lifting speed 0.15-0.47m/s pulley block model 3*3 wire-rope diameter 20-21.5mm Assistant windlass single rope rated lifting power 15kn maximum lifting power of a single rope 20kn single rope rated lifting speed 0.58m/s wire-rope diameter 9.8mm Windlass power 37kw Gross weight (excluding drillingpipe) 11t
1.The features of SPJ-300 water well drilling rig ·SPJ-300 water well drilling rig is powered by electric motors. ·The drilling rig is a bulk rotary table drill, which is mainly used for middle Quaternary, fine grained strata and soft rock layers. The main usage is: the hydraulic geological conditions at the bottom of the exploration and survey; the agricultural irrigation, the industrial water use, the underground tunnel ventilation, the bridge and other engineering drilling. ·When drilling rig works, mud flushing fluid (positive circulation) and rotary table are used to drive the drilling tools to rotate.Use winch system to realize decompression drilling, lifting drilling, down pipe , impact sampling, vertical drilling tower,etc.. ·The drilling rig is equipped with fine adjustment drilling mechanism and mechanical screwing down drilling tool device 2.The specifications of SPJ-300 water well drilling rig Borehole diameter 500mm-1500mm Drilling depth 300m Maximum output torque 18kn.m Active drilling pipe 108*108*12mm Drilling pipe 89mm Main windlass lifting power 30kn Assistantwindlass lifting power 20kn Rotary table latus rectum 500mm Rotating speed (forward and inversion) 40/70/128r/min Height of the drilling tower 13m Gross weight (excluding drill rod) 9t External dimension 2200*6000*13000mm Drilling tower Type A / hydraulic drill tower This product is widely used inwater conservancy project , pile foundation engineering, bridge construction and so on
1.The features of SPJ-600 water well drilling rig SPJ-600 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 600 meters, which is suitable for soil, rock and gravel layers. The SPJ-600 water well drilling rigadopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-600 water well drilling rig Drilling depth 600m Borehole diameter 500mm-2500mm Rotary table latus rectum 605mm Active drillingpipe 108*108*12mm Drilling pipe 89mm Rotary speed 42/75/134kn.m Main windlass single rope lifting power 35kn hook rated load 210kn hook lifting speed 0.15-0.47m/s pulley block model 3*3 wire-rope diameter 20-21.5mm Assistant windlass single rope rated lifting power 15kn maximum lifting power of a single rope 20kn single rope rated lifting speed 0.58m/s wire-rope diameter 9.8mm Windlass power 37kw Gross weight (excluding drillingpipe) 11t
1.The features of SPJ-1000 water well drilling rig is mainly used for drilling and exploration of hydrology and water wells within 1000 meters, which is suitable for soil, rock and gravel layers. The SPJ-1000 water well drilling rig adopts mechanical transmission and rotary table driving drilling tool to achieve footage. It has the characteristics of large output torque, strong lifting ability and wide speed range. The drilling rig has windlass, derrick with truss type "A" type tower or four corner towers. The drilling rig is a bulk structure, with strong decomposition ability and easy transportation. It can also be processed into trailer or vehicle mounted. 2.The specifications of SPJ-1000 water well drilling rig Drilling depth 1000m Borehole diameter 500mm Rotary table diameter 1200mm Rotary table latus rectum 670mm Rotary table weight 2050kg Rotary speed 36/60/90/130r/min Active drilling pipe 133*133*12mm Drilling pipe 89mm or114mm Main windlass single rope lifting force 60t Assistant windlass single rope rated lifting force 30t Windlass power 45kw
Supplier: 304 stainless steel pipes, carbon steel pipes, galvanized steel pipes, seamless pipes, stainless steel pipes, used drill bits
Buyer: Used drill bits and drill pipes, tubing, casing
The DTH300 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The DTH300 rig’s flexibility means it can be mounted on single truck version, two truck versions and on local truck matching the rig to the terrain it will be used. Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves