1. Silicon carbon can be used as metallurgical deoxidizer and high temperature resistant material in smelting.
2. It can also be used as grinding material, can be used to manufacture grinding tools, such as grinding wheel, whetstone, grinding head.
Properties:
Silicon carbon is a new type of steel deoxidizer and ideal heat preservation agent for deoxidization. The power consumption can be reduced by 15-20kw/h by using 1-4kg/t, and the productivity can be increased to 8-10% by reducing the time of 15-20min per furnace
All grade we can supply
Products:CALCIUM CHLORIDE PELLETS/BALL/PRILL
Content :74% 77% 94%
CAS Number:10035-04-8 10043-52-4
Molecular formula:CaCl2
Molecular weight:110.98
PH Value:8-10
Physico-chemical property: colorless cube crystal. General goods is white or white porous or grain or cellular. Odourless, taste bitter. Relative density: 2.15(25â??). Melting point:782â??.Boiling point: above1600â??. Good hygroscopic property, easy to deliquesce in the air. Soluble in water, meanwhile release a mass of heat, aqueous solution is subacidity. Soluble in alcohol, acetone, acetic acid. Act with ammonia ethyl alcohol, producing CaCl2 ·8NH3 and CaCl2 ·4C3H5OH complex. At normal temperature the aqueous solution crystallizes, sometimes is hexahydrate, after heating to30â??then it will dissolve in its crystal water. And continuously heating until dehydration, to200â??becomes dehydrate. And then heating to260â??, become the white porous anhydrous calcium chloride.
Product usage:
1. Used as snow-melting agent in roads, highways, park, airport, golf course in winter.
2. Oil drilling, well drilling operating fluid, completion fluid.
3.Petrochemical engineering dehydration fluid.
4.Dust proof in roads, mining area and so on.
5. Construction industry early strength agent, enhance concrete strength, product coating coagulator.
6.Used as moisture proof drying agent, drying medium between gas and liquid in processing.
7. Rubber industry latex coagulating agent.
8. Ferrous metallurgy industry used as chlorinating agent and additive.
9. Paper industry used as additive waste paper deinking agent.
We can supply Recarburizer/ Carbon Raiser/carburetant
Recarburizer/ Carbon Raiser/carburetant are used in casting, cast iron, cast steel, and castings. There is a requirement for carbon. Therefore, as a name suggests, carbonizers are used to increase the carbon content in molten iron. For example, the common charge in smelting is pig iron, scrap, Back to the charge, the carbon content of the pig iron is high, so increasing the amount of scrap steel, reducing the amount of pig iron, and adding carbonizer can play a role in reducing the cost of castings.
We can supply all spec. FC 80,FC 85,FC 90,FC 92,FC 93,FC 94 FC 95, FC 98 so on all grade.
Packing as client demand.
Silicon Barium Calcium is a good new deoxidizer in steelmaking, and has good desulphurization and phosphorus ability. It plays a very important role in smelting steel with low sulfur and low phosphorus. It has a broad application prospect in the special steel system.
Barium calcium alloy is a new type of high efficiency compound alloy in barium alloy. It is the deoxidizer, desulfurizer and dephosphorization of steelmaking. It is the inoculant and modifier in the casting.
We can supply alll kindly of it, Si 35-55,Ca 10-18, Ba 1-20.
All kind of Calcium Silicon Barium Aluminum we all can supply, please contact us
Application:
1.Calcium metal mainly used as the basic raw materials for calcium-organic.
2.Calcium metal is the ideal deoxidizer of producing special steel and all steel.
3.Calcium metal is the reluctant of producing rare earth metal of high purity.
We can supply 98.5% grade
Products:MAGNESIUM CHLORIDE FLAKES/ PELLETS/GRANULAR,POWDER
Chemical Formular:MgCl2.6H2O,
MgCl2.6H2O:99%MIN, 98%MIN, 97%MIN
MgCl2:43%,45%,46%,47%
Appearance:Flake,Powder,Granular,Pellet
Characteristics:white ,soluble in water, easy to be damp in damp air, explodes hydrogen chloride and magnesium oxide at high temperature.
PH value (20% dissolution) 6-8
Usage:
1.Metallurgical industry
Used for making refractory matter and adhesive of stones furnace arm. And is the raw material for making â?¡ flux and smelting magnesium metal.
2. Chemical industry
Mainly used for making all kinds of magnesium salt, such as magnesium oxide, magnesium hydrate, magnesium carbonate, firecracker fixing agent, is also the raw material used for antifreezing agent.
3.Construction material
making hard, corrosion resistant magnesia cement with magnesia(MgO), can be made into artificial-marble, magnesia tile, floor, ceiling, decorative sheet, fire-proof plate, greenhouse support, partition board, magnesium well lid, bathtub, door frame and window frame and trailer and so on.
4.Mechanical industry:
In daily life, magnesia can be made into machine box shooks, delta-ring edge and furniture, it is a good material instead of soil.
5. Food industry:
Tofu pointed by brine (magnesium chloride liquor) is softer and fresher than that pointed by stone. The brine is also used as food additives.
6.Transportation industry
Used as road snow melting agent, deicing fast, has little corrosivity to the vehicle, is better than sodium chloride.
7.Medicine
Magnesium made into halogen dry can be used in medicine.
8. Agriculture
Can be used for making magnesium fertilizer, potassic-magnesian fertilizer, cotton defoliant.
Supply Magnesium Chloride 46% Prill
(1) Purity: Mgcl2 45%min
(2) Variety: White Prills
(3) Package: 25kg PP bags, 1MT Jumbo bags or as per customer's request
(4) Usage: Snow and Ice melters, dust control, feed/food additives, and other industrial use.
Magnesium Chloride Grade:
(1) Magnesium Chloride Tech Grade
(2) Magnesium Chloride Feed Grade
(3) Magnesium Chloride Food Grade
Magnesium Chloride Appications:
(1) Use in dust and erosion control
(2) Use in ice control
(3) Nutritional supplement
(4) Niche uses
(5) Culinary use
(6) Gardening and Horticulture
Packing & Delivery:
(1) Packing: 25kg PP bags, 1MT Jumbo bags or as per customer's request
Supply MAGNESIUM CHLORIDE FLAKES/ PELLETS
Products:MAGNESIUM CHLORIDE FLAKES/ PELLETS
Content :47%
CAS Number:7786-30-3
White Magnesium Chloride
Molecular formula: Mgcl2. 6H2O
Molecular weight: 203.30
Characteristics:white ,soluble in water, easy to be damp in damp air, explodes hydrogen chloride and magnesium oxide at high temperature.
PH value (20% dissolution) 6-8
Usage:
1.Metallurgical industry
Used for making refractory matter and adhesive of stones furnace arm. And is the raw material for making â?¡ flux and smelting magnesium metal.
2. Chemical industry
Mainly used for making all kinds of magnesium salt, such as magnesium oxide, magnesium hydrate, magnesium carbonate, firecracker fixing agent, is also the raw material used for antifreezing agent.
3.Construction material
making hard, corrosion resistant magnesia cement with magnesia(MgO), can be made into artificial-marble, magnesia tile, floor, ceiling, decorative sheet, fire-proof plate, greenhouse support, partition board, magnesium well lid, bathtub, door frame and window frame and trailer and so on.
4.Mechanical industry:
In daily life, magnesia can be made into machine box shooks, delta-ring edge and furniture, it is a good material instead of soil.
5. Food industry:
Tofu pointed by brine (magnesium chloride liquor) is softer and fresher than that pointed by stone. The brine is also used as food additives.
6.Transportation industry
Used as road snow melting agent, deicing fast, has little corrosivity to the vehicle, is better than sodium chloride.î?²
7.Medicine
Magnesium made into halogen dry can be used in medicine.
8. Agriculture
Can be used for making magnesium fertilizer, potassic-magnesian fertilizer, cotton defoliant.
We can supply all kind of SiCa , Si 18-60,Ca 18-30 during it, all can supply. if you need please kindly contact us
Inoculants are added in liquid cast iron in order to provide the best and consistent characteristics in the final casting. They are used to control matrix structure and avoid casting defects.Ferro Silicon Ba Inoculant,Si-Ba-Ca inoculant,Si-Zr Inoculant we all can supply
Electrolytic manganese is in high purity,it is used to increase the hardness of metal materials,the most widely used is in manganese copper alloy,manganese aluminum alloy,200 series stainless steel, the manganese can improve the strength, toughness, wear resistance and corrosion resistance of these alloys.
We can supply all grade
We have good relationship with Egypt miner, and can supply Manganese ore directly from Miner with good price.
1.Commodity:
Egyptian Manganese Ore Lumps
2.Quantity:
2000-5000MT Per Month
3.Specifications
Mn : 32% Min.
Fe : 20% Max.
Sio2 : 8% Max.
Al2O3: 5% Max.
P : 0.13% Max.
S : 0.2 - 0.4 %
Moisture Content :0.6% Max
Grain Size: 5 mm - 400 mm : 80%
Also can supply low grade Manganese Ore with Mn 22% min
Applications: Used in Magnesium alloy production, aluminum alloy production, steel and desulphurization, aviation military industry, automobile manufacturing, light industry, metallurgy industry, chemical industry, electronics industry and instrument manufacturing industry,etc..
we can supply,99.9. 99.99 99.8grade
Si-Zr Inoculant all kind we can supply
Si-Ba-Ca inoculant all kind we can supply
We Can supply all kind of ferro Silicon, if you have demand please kindly contact us !
Fellow is the main spec we can supply
1. Si 70% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max
2. Si 72% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max
3. Si 75% min, C 0.2%max, Al 2% max,S 0.04%max, P 0.02%max
4. Low Al FeSi 75% Si75 C0.2 Al0.5 S0.04 P0.02
Size:10-50 mm,10-100mm
Other chemical composition and size can be supplied upon request.
Also supply very good price for FeSi 65% min with fellow spec
1. Si 65% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max
2. Si 70% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max
Ferro Silicon Powder:
FeSi powder Si 43-47 C 0.15%max Al1.0%max S 0.035%max P0.035% max
Size:50-200 mesh. Other spec and size upon client request
We can supply FeSi 65%,with very good price for fellow grade.
1. Si 65% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max
2. Si 70% min, C 0.2%max, Al 3% max, S 0.04%max, P 0.04%max
Size:10-50 mm or 10-100mm as client need
Ferro Silicon Powder:
FeSi powder Si 43-47 C 0.15%max Al1.0%max S 0.035%max P0.035% max
Size:50-200 mesh. Other spec and size upon client request
If you need please contact us
FeSiAl is a strong deoxidizer in producing steels and many other metals and alloys. It can effectively reduce impurities and gas elements in steel liquid, as well as remove sulfur. It also has a greater density, so the penetrability is strong. Si 18-25, Al 30-48 all can supply
Ferro Silicon Ba Inoculant all kind we can supply
We can supply all kind of FeSiMg , Mg from 4-25 , with Rare or without all can supply. if you need please kindly contact us
1.Most metallurgical silicon metal is used as an alloying agent in the aluminum industry due to its ability to increase the strength of aluminum alloys as well as to reduce its weight;
2.Metal Silicon is the raw material of ultra-pure silicon in electronic industrial, playing an important role in making electronic devices and solar cells.
3. Silicon metal is used in manufacturing a number of sorts of silicones, resins, and lubricants, silicone rubber, thereby enhancing the heat resistance, electrical insulation, corrosion resistance, water tightness and other characteristics.
2022,3033,533,411 we can supply
Where it comes from :
When introducing this products, some salesmen often misleading the customers deliberately or inadvertently by saying that it is a newly designed product or a slag. Actually it is a by product comes from silicon metal plant. It deposits on the bottom of the melting furnace, and has to be cleaned out in months interval. But with technological development, the interval has prolonged from three months to six months. So the output of this product is limited. We collect and select this product from bigger Silicon metal factories all around China.
68/18,70/22,65/18 we all can supply
Core wire technology is a new treatment in secondary steelmaking developed in recent years, alloy core wire can purify the molten steel, change the inclusion form, improve the cast ability of the importantly, it will increase the yield of alloy ,cut down the cost and consumption.
1. Calcium Silicon Cored wire
Technical specifications:
(1) Wire diameter: 13mm/9.0mm or other as client demand
(2) Thickness of the steel: 0.35mm±0.05mm.
(3) Powder contain: 225g/m ±10g/m.
(4) Ratio powder/steel: 60/40.
(5) Wire length: 5000m.
(6) Coil weight: 1000-1400kgs.
(7) Coil width: 600-800mm
(8) Wire winding: horizontal
(9) Packing: in steel cages covered with plastic.
2. Pure Calcium Cored wire.
3. Other kind of cored wire like Fe Cored wire, FeCa Wire, Al cored wire so on and other spec please email to checking, We all can supply.
