Features
·Large LCD display for different parameter, integrate voltage, current, power, charge
capacity and time.
·Bidirectional current detector suit for battery
test and other DC system. Provide battery AH
volume counter.
·Inside RF communication chip for wireless
mode.
·Meter provide max 2600pcs meters in one
install position.
·Provide power off memory, display kit can
automatic saving measurement AH, Time, Watt
value when power off, (If need to power off
measurement kit need to press OK button for
manually save).
·Provide screen lock, time off, brightness
adjustment and change the language display
function.
·Provide over voltage(OVP), low voltage(LVP), over current(NCP/OCP), time delay(TDP)
protection functions.
TDB automatic capacitor bank can reducing harmful system harmonics
and therefore fewer occurrences of power quality-related equipment
problems.
Ability to free up spare capacity on the transformer and main
switchboard, thereby providing additional capacity for future load
growth without the need to upgrade infrastructure.
More stable and improved voltage regulation ensuring motors and
plant operate at maximum efficiency. Reducing strain on the network
provider's supply system thus helping avoid possible blackouts in the
area. Features ·Used adaptive self-healing electrical capacitor, high reliability, long
operating life and can work in low running temperature.
·Imprvoe power factor, reduce reactive power loss, has evident effect
for power conservation;
·Upgrade power quality, balance transformer load factor and
electrical equipment efficiency;
·With short circuit protection, control device can automatic
disconnection power if there will be internal fault, ensure the
equipment safety operation;
·With self discharge circuit, after switching off from the power grid, residual voltage will decline below 50V in three minutes;
·Reasonable structural design, stainless steel cabinet have good
thermal and dynamic stability.
Description
Instead of the traditional CJ-19 AC contactor, can connect grid in voltage pass zero and current pass zero disconnect, switching
capacitor without surge-current impact, prevent high voltage; full-wave conduction, no harmonic, and noiselessness.
With SCR control technology, integrate
thyristor, trigger board, fan, temperature control, wring terminal, easy for installation.
It is the ultimate solution in power factorcompensation system.
Especially for serious harmonic working
conditions, max provide 0.02s response time.
Description The BA series intelligent combination type
low voltage power capacitor, it has
microelectronic software and hardware
technologies inside.
By taking the self-healing type low voltage
power capacitor as the main body, add the
intelligent measuring and controlling
processor as the control center, It can
achieve zero-crossing control of thyristor, delay switching of contact of the mechanical
type magnetic latching relay. Features ·Balance & Unbalance load compensation;
·Mixed optimized grading compensation;
·protection function:
over / under voltage;
over / under-current;
voltage loss, phase loss;
harmonic wave;
temperature abnormal
·Thyristor for zero-crossing switchingon/
off;
·Provide RS485 port easy group intelligent
compensation network
·LED screen human-machine interface
provide:
Voltage;
current, active/reactive power, power factor display
Show running condition, switching and
device status
·Design with Combination structure, high
reliability; easy for expansion
compensation capacity.
Description
BSMJ/HY111 power capacitor used to
compensate for power system inductive load, power factor, improve voltage quality, reduce
line consumption.
Use semi-solid impregnant, no oil leakage, is
a new generation of environmentally friendly
products.
With self-heal design, prevent over-voltage
damage, standard 400V/600V working
voltage from 5KVAR to 30KVAR, accept
customized specification order
Features
·Rated output: 1~60Kvar
·Rated frequency: 60/50Hz.
·Rated voltage: 220VAC~690VAC, ·Excellent self-healing performance
·Lower Power Bills / Improved Power factor
·Lower Stress Heavy Duty Designs Available
·Increased durability and tolerance of
harmonics and transients
·Single phase/Three phase electrical
capacitors for power factor correction
·Temperature-25+50, humidity
85%RH, and altitude lower than 2000m
The MCM1000 Series provides a compact and robust metering solution, enable reliable monitoring of building electrical loads with a low installation cost-per-point by combining sub-metering. The unit performs real-time metering, measures energy consumption, multitariff time-of-use (TOU) and monitors power quality for max 18 channel circuits for single phase or 6 channel for three phase circuits. Advanced communications options including Modbus via RS485, I/O communications provide for extensive reliable data exchange. Multiple units can be connected together to meter unlimited number of circuits. The versatility of MCM1000 meters are ideal for multi-tenant or departmental metering applications within office towers, condominiums, apartment buildings, shopping centers and other multi-user environments. Features: ·Class 0.5 basic parameter and class 1 for active energy ·6 channels three phase or 18 channel single phase metering ·Current measuring .../5 or .../1 A (optional 333mV) ·Standard 35mm - 8 module DIN rail mounting ·Provide RS-485 MODBUS-RTU Communications ·Optional 6DI / 2DO for signal detect and remote control ·Optional external connection LCD screen, 96*96mm panel mount ·Optional TOU record for each monitor channel ·Accept customization design
DCEM are special design for DC circuit metering, muti-channels signal
design can much reduced the hardware cost of project. One meter
provide different four channel amp reading and energy consumption
value record.
same 35mm din rail mounting shell can work with Blue Jay MCM series
meter for combine energy metering project in AC & DC circuit. Optional
analog, digital, relay and alarm output is available via field-swappable
plug-in communications modules. Also provide on-board RS485 serial
communication port (MODBUS RTU) to send data to the external
systems. ·DC Excitation Systems
·Light Rail Transit Systems
·EV Charging Monitoring
·Data Center
·Cellular Tower Energy Monitoring
·DC Energy Management Systems
·Power Distribution for Telecommunication Room
·Solar Photovoltaic Systems
·Industrial DC Control Systems
·Metallurgy and Electroplating Industries
·Wind Power Generation Features:
·DC power / energy sub-meter provides Voltage, Current, Power and Energy
measurements
·Monitor and control power switches
·Bi-directional for renewable systems (NET metering)
·Interfaces with shunt or external Hall Effect current sensors
·Up to 1000Vdc Voltage input
·Up to 4 channels energy metering
·Record last 30days energy data for all channels
·RS-485 connectivity - Modbus RTU
·Optional alarming and analog output
·Optional 4 channels digital inputs / 2 channels digital outputs
Advance power meter, provide RS-485
communication port, easy for user connect to
PLC and build SCADA system.
Higher measurement accuracy(0.2) and
system stability, it is cost effective ideal for
OEMs and panel builders solution. (Option
LED display screen) Features ·Class 0.5 power and energy
·Current measuring .../5 or .../1 A
·Backlit LCD display
·Expandable input / output modules (up to 3
modules)
·With RS-485 Modbus/RTU Communications
·With 2 channel Pulse Output (PO) for active
energy&reactive energy counting
·Optional 1 channel Analog Output (AO)
·ITF Technology: galvanic insulation
protection inputs outputs
·Universal series power supply (85-
265VAC/DC) Application ·Metering of distribution feeders, transformers, generators, capacitor banks
and motors.
·Medium and low voltage systems.
·Measuring converter: optional association
of an instantaneous parameter to one of the
analogue outputs available (0...20 mA /
4...20 mA)
High-end multifunction power analyzer
manufactured by Blue Jay Technology. higher
measurement accuracy, and powerful
functions. With its four direct access keys and
TFT displays, friendly full text interface helps
user operate device more easy.
Max 52th harmonic individual monitor, let
user clear grasp of the present electrical grid
quality. Features ·Class 0.2 power and energy
·Current measuring .../5 or .../1 A
·Clear and large matrix LCD screen
·Expandable input / output modules (up to 3
modules)
·With 2 channel Pulse Output (PO) for active
energy&reactive energy counting
·With RS-485 Modbus/RTU Communications
·Optional 1 channel Analog Output (AO)
·Optional 4 channel Digital Input (DI) and 2
channel Digital Output (DO)
·Record and read multi- tariffs ratio, Up to 3
months
·Electrical parameter MD record
·ITF Technology: galvanic insulation
protection inputs outputs
·Universal series power supply (85-
265VAC/DC) Application ·Metering of distribution feeders, transformers, generators, capacitor banks
and motors.
·Medium and low voltage systems.
·Commercial, industrial, utility.
·Power quality analysis.
·Harmonic measurement.
BJ-192/193 series especially developed for
indication and supervision of the three-phase
circuit, replaces an analogical display meter, reducing installation manpower and
optimizing the used one of spaces in the
panel.
Ideal for protection of single phase and
three-phase networks, it is monitored and
generally to own alarm superior and inferior.
Protection of the parameters of programming
by password.
Features ·Class 0.5(192 series)/0.5S(193 series)
electrical parameter measurement
·Current measuring .../5 or .../1 A
·Measurement function cover:
Current, Voltage, total three-phase power, power factor, frequency
·RS-485 MODBUS-RTU Communications
·Expandable input / output modules (1
modules)
·ITF Technology: galvanic insulation
protection inputs outputs
·Large character LED Screen display
·Optional various install sizes Application ·Metering of distribution feeders, transformers, generators, capacitor banks
and motors.
·Medium and low voltage systems.
Description
MTX-105P is advanced battery monitor with
dual-side metering function, do not need
change the wiring in charging/discharging
process. have external connection board, can
work with different range current shunt, and
easy wiring connection. Mainly used for
monitor the 12V/24V/48V solar system
battery working condition.
Same compact size as previous generation, MTX-105P show volt, amp, power, charge capacity, running time data, add battery type
correction factor K, SOC(scale of charging)function, help user known the detail information of their battery.
Features ·Dual-side metering, can show system charging
/ discharging current data.
·With two line LED display, show volt (V), amp
(A), power (W), amp-hours (AH), running hours
(H), battery capacity (%).
·Protect your batteries against deep discharge
·With on-line calibration function, the user can
calibrate the voltage and current values easily.
·Use external shunt for amp data sampling, support up to 500A circuit measurement.
·User can free to set the measurement battery
capacity, can used in variety types of battery
systems.
Description
MTX-105P is advanced battery monitor with
dual-side metering function, do not need
change the wiring in charging/discharging
process. have external connection board, can
work with different range current shunt, and
easy wiring connection. Mainly used for
monitor the 12V/24V/48V solar system
battery working condition.
Same compact size as previous generation, MTX-105P show volt, amp, power, charge capacity, running time data, add battery type
correction factor K, SOC(scale of charging)function, help user known the detail information of their battery.
Features ·Dual-side metering, can show system charging
/ discharging current data.
·With two line LED display, show volt (V), amp
(A), power (W), amp-hours (AH), running hours
(H), battery capacity (%).
·Protect your batteries against deep discharge
·With on-line calibration function, the user can
calibrate the voltage and current values easily.
·Use external shunt for amp data sampling, support up to 500A circuit measurement.
·User can free to set the measurement battery
capacity, can used in variety types of battery
systems.
The MCM400 main for Non - industrial users sub-metering, use
../100mA or 0.333mV CT, split core design easy for install, Din-rail
mounting for every style of electrical panel in build.
The unit performs real-time metering, measures energy consumption, multi-tariff time-of-use (TOU) and monitors power quality max 4
channels circuit for three phase circuits, with LCD screen and keypad
for easy for configuration. RS485 port can send out collected value to
remote host.
Enable reliable monitoring of building electrical loads with a low
installation cost-per-point by combining sub-metering. It is ideal for
multi-tenant or departmental metering applications within office
towers, condominiums, apartment buildings, shopping centers and
other multi-user environments. Features: ·Class 0.5 basic parameter and class 1 for active energy
·4 channels three phase metering
·Current measuring .../5 or .../1 A (optional 333mV)
·Standard 35mm - 4 module DIN rail mounting
·Provide RS-485 MODBUS-RTU Communications
·Build in LCD screen, keypad for configuration
·Optional TOU record for each monitor channel
·Accept customization design
Three phase electrical network power quality
detection device, provide energy
consumption and generate; THD (Total
Harmonic Distortion); Harmonic individual
data reading.
Build-in 4 tariffs energy logger function, with
onboard memory can record last three month
energy data, free to set max 12 segment
record period, can be use as a commercial
billing unit. Features ·Class 0.5S power and energy
·Current measuring .../5 or .../1 A
·Backlit LCD display
·Expandable input / output modules (up to 3
modules)
·With RS-485 Modbus/RTU Communications
·With 2 channel Pulse Output (PO) for active
energy&reactive energy counting
·Optional 1 channel Analog Output (AO)
·Optional 4 channel Digital Input (DI) and 2
channel Digital Output (DO)
·Record and read multi- tariffs ratio, Up to 3
months
·ITF Technology: galvanic insulation
protection inputs outputs
·Universal series power supply (85-265VAC/DC) Application ·Applied to the control of general switch
boards and low, medium and high
voltage connection points.
·Harmonic analyze.
·Remote data reading.
·Alarm station with voltage-free digital
inputs.
Description
CJ16(19) switch-over capacitor contactor is
the new type of components for electric
appliances, standard for 400V(50/60Hz) grid, 3P3W connection from 25A~95A. It is
developed and produced on the basis of the
introduced foreign technology of the same
kind.
The device is widely applied to low voltage
reactive power compensation device to
replace the subassembly composed of three
XD1 current-limiting reactors and CJ10
contactor, and it is also can be used in the
general control circuit to limit surge impact, protect capacitor and other electrical device
from over voltage damage.
Features
·Max measurement 100A & 300V
·Isolated / non-isolated power supply
optional
·0.28" LED screen, different color display
current and voltage (VA type)
·Option green / red / blue color, 0.56'??screen
(Single-function type)
·Less than 10amp do no need external
shunts
·Auxiliary power with polarity protection
·With zero potentiometer for calibration.
Main Features
·Max measurement 100A & 600V(AC) / 500A
& 600V (DC)
·Isolated / non-isolated power supply
optional
·0.39" large character LED screen, Different
color display current and voltage
·Less than 20amp do no need external
shunts (DC)
·Auxiliary power with polarity protection
·50A type can choose hall CT on-board type
(AC)
Description
SCT series split-core current senses
AC current from 100 to 800 Amps
passing through the center conductor.
Split core design permits non-contact
current measurements through
magnetic field induction without
requiring that the primary wire be
taken offline and disconnected for CT
installation. This method permits a
safer, easy and portable current
measurement.
Features
·Secondary side current less than1A
·Spite core design for wiring cable
·with a 1 meter distance copper wire for
easy installation
·Work with MCM400 and optional ../1A for
other model meter
Description
The DP series current transformer has been
specially designed to facilitate their
installation in new or already existing net
works. Connection of conventional CTs
usually requires the interruption of the
primary side circuit to pass cables or bus-bars
through the transformer core or to connect
such cables to the primary terminals. DP
series CT core can easily opened and
installed and connected without any supply
interruption. Thus saving time and the
installation costs. Features
·Secondary side current 5A
·Two built in fixing methods: Wall or Busbar
mounting
·Wide inner window, allowing clamping in
any types of cables or bus-bars.
·Wide range of sizes to suit most site
installations.
