TDB automatic capacitor bank can reducing harmful system harmonics
and therefore fewer occurrences of power quality-related equipment
problems.
Ability to free up spare capacity on the transformer and main
switchboard, thereby providing additional capacity for future load
growth without the need to upgrade infrastructure.
More stable and improved voltage regulation ensuring motors and
plant operate at maximum efficiency. Reducing strain on the network
provider's supply system thus helping avoid possible blackouts in the
area. Features ·Used adaptive self-healing electrical capacitor, high reliability, long
operating life and can work in low running temperature.
·Imprvoe power factor, reduce reactive power loss, has evident effect
for power conservation;
·Upgrade power quality, balance transformer load factor and
electrical equipment efficiency;
·With short circuit protection, control device can automatic
disconnection power if there will be internal fault, ensure the
equipment safety operation;
·With self discharge circuit, after switching off from the power grid, residual voltage will decline below 50V in three minutes;
·Reasonable structural design, stainless steel cabinet have good
thermal and dynamic stability.
Container made of stainless steel plate. Polypropylene film is treated with double side rough processing for easy impregnation. Polar plate is made of ultra thin aluminium foil. Internal fuses protects the capacitor in case of breakdown or failure. Conforming Standard: IEC 60871 Capacitance tolerance : -3%~+5% Frequency: 50/60 Hz Running no longer than 8 hours out of every 24 hours under 1.1 times of Un. Running under stable over current, highest value of which reaching 1.3 times of In, caused by over voltage and high harmonic. As for capacitor with max positive deviation, the value of stable over current can be as 1.43 times high of In.
Chip tantalum capacitors Solid tantalum chip capacitors are designed and manufactured with the demanding requirements of surface mount technology in mind. There are a, b, c, d, e, s six case codes. They have lower esr comparing with the dipped tantalum capacitors. The product is compatible with automatic pick and place equipment. Suitable for military equipment and computer fceil telephone and other electronic products.
Capacitors Solid tantalum chip capacitors designed and manufactured with the demanding requirements of surface mount technology.There are a, b, c, d, e, s six case codes. They have lower esr compared with the dipped tantalum capacitors. The product compatible with automatic pick and place equipment. Suitable for military equipment and computer, telephone and other electronic products. Meets the requirements of eia 535baac and qc300801, q / yhc. 45-01 standard. General characteristics 1. Operating temperature: -55c ~ 125c (above 85c, use dreaded voltage) . 2. Capacitance tolerance: / -20% , / -10% . 3. Capacitance range: 0. 1uf~330uf. 4. Voltage rating: 4v~50v. 5. Reliability: 2% per 1000h at 85c with 0. 1 series impedance 60% confidence level.
Features: 1) Stringent dimensional tolerance allows highly reliable and high speed Automatic chip placement on PCBs 2) Terminations are plated with Ni and solder 3) High insulation resistance and high reliability 4) Used for electronic equipment 5) A variety of models including 0402, 0603, 0805 and 1206 are available 6) Use dielectric materials of COG, Y5V and X7R COG (NPO) is the most popular formulation of the "temperature-compensation" capacitor according to EIA. It is class I dielectric materials. COG (NPO) ceramics offer very stable capacitor dielectrics. And temperature coefficient is within 0+/- 30ppm/C. Typical capacitance change with frequency and voltage is negligible at less than +/-0.05%. COG (NPO) formulations show no aging characteristics
Polyester film capacitor F e a t u r e s 1.Good reputation in use with consumer & industrial electronics. 2.Optimum for automatic insertion due to their small size and light weight. 3.Coated with epoxy resin for superior heat resistance, humidity resistance and solvent resistance., Specs: Operating temperature -40¦ to + 85¦ Rated voltage dc 100v, 250v, 400v, 630v, 1000v Capacitance range 0.01 to 0.47µf Capacitance tolerance +/-5%, +/-10%, +/-20% Insulation resistance 30, 000 mΩ min Dissipation factor
Technical Data: Series WS-B Low Voltage Power Capacitors Rated Voltage Range From 220-1000 VAC Connection 3 phase (1 phase on request) Frequency 50/60 Hz. Power Range 1-100 Kvar Dielectric Metalized polyprolilene film Protection IP 42 (IP 54 on request) Discharge Resistors Built in automatic discharge resistors included, less than 75V within 3 minutes after de-energizing the capacitor Tolerance 5% Maximum Ambient Temperature -25 C--50C (Other temperature range on request) Average temperature within 24 hours below 40C&average temperature with a year below 30C Max. Relative Humidity¡Ü90% Max. Altitude¡Ü2000m (Other altitude on request Over Voltage Tolerance 1.1 UN (8 hours max. in every 24 hours)1.15 UN (30 minutes in every 24 hours)1.2 UN (5 minutes in every 24 hours) 1.3 UN (1 minutes in every 24 hours) Over Current Tolerance 30% permanently Max. Surge Current 200 times of rated current Dielectric Loss¡Ü0.2 Watt / Kvar Voltage Test Between terminals: 2.15 Un for 10 seconds. Between terminals to container: 3000VAC for 10 seconds Safety System Self protection device Case Material Rust-Proof Painted Steel. Execution Indoor, minimum distance between units : 50mm Standard IEC60831 / GBT12747. Carton. Capacitors fixed and protected by polyfoam.
Product parameter Series: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225; Material: X5R/X7R, NPO, Y5V; Capacity: 0.2p-100uF capacitor 10V-5000V 0.2Pf--10Uf full range; Deviation: B=±0.1pF, C=±0.25pF, D=±0.5pF, F=±1%, G=±2%, J=±5%, K=±10%, M=±20%, Z=-20%+80%. Features The product has high dimensional accuracy, which is convenient for high-efficiency assembly of the automatic placement machine; The terminal electrode is a three-layer electrode, suitable for wave soldering and reflow soldering; The dielectric body and the surface are made of the same material, with little influence from environmental conditions, high insulation resistance, and high reliability; Containing various temperature characteristic media from COG to Y5V, suitable for common electronic equipment such as communications, computers, household appliances and instruments. Product advantages 1. Small size, easy for SMT processing, good solderability, compared with other traditional plug-in capacitor, it greatly solves the problem of small space on the circuit board. It is a representative product of high-tech products. 2. Long life span, the product life span is ten years. 3. Good stability, which is reflected in a stable requirement for the capacitance and withstand voltage of the smd capacitor . 4. Green environmental protection requirements, because the smd capacitor are made of ceramics as raw materials, environmental protection and energy saving are achieved. 5. Good heat insulation performance. Because it is made of ceramics as raw materials, it is a natural good material for heat insulation. The above advantages are not available in traditional plug-in resistors. smd capacitor 1206 analysis chart Physical anatomy diagram Applicable industry Suitable for LED lighting related products, power products, household appliances, computer side office products, large industrial equipment controllers, network equipment, communication products, digital products, automotive electronics, security monitoring systems and other fields.
SMD capacitor product series parameters Volume: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225 Voltage: 6.3V, 10V, 16V, 25V, 50V, 100V, 250V, 500V, 630V, 1kV, 2kV,3kV, 5kV; Packing: 0402: 10000/reel 0603 4000/reel 0805 1206 1044000/reel over 105 2000/reel Material COG NPO X7R X5R Y5V Temperature range -55�°+125 -30�°+85�° Capacitance range 1-10P 1-100P 100P-100NF above 100NF Letters G J K M Z Error �±2% �±5% �±10% �±20% +80%-20% Features: 1. The product has high dimensional accuracy, which is convenient for efficient assembly of the automatic placement machine; 2. The terminal electrode is a three-layer electrode, suitable for wave soldering and reflow soldering; 3. The dielectric body and the outer surface are made of the same material, with little impact from environmental conditions, high insulation resistance, and high reliability; 4. Containing various temperature characteristic media from COG to Y5V, suitable for smart lights, smart control sockets, smart audio and video, smart security, smart locks and other electronic equipment.
SMD capacitor product series parameters Volume: 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225 Voltage: 6.3V, 10V, 16V, 25V, 50V, 100V, 250V, 500V, 630V, 1kV, 2kV,3kV, 5kV; Packing: 0402: 10000/reel 0603 4000/reel 0805 1206 1044000/reel over 105 2000/reel Material COG NPO X7R X5R Y5V Temperature range -55�°+125 -30�°+85�° Capacitance range 1-10P 1-100P 100P-100NF above 100NF Letters G J K M Z Error ±2% ±5% ±10% ±20% +80%-20% Features: 1. The product has high dimensional accuracy, which is convenient for efficient assembly of the automatic placement machine; 2. The terminal electrode is a three-layer electrode, suitable for wave soldering and reflow soldering; 3. The dielectric body and the outer surface are made of the same material, with little impact from environmental conditions, high insulation resistance, and high reliability; 4. Containing various temperature characteristic media from COG to Y5V, suitable for smart lights, smart control sockets, smart audio and video, smart security, smart locks and other electronic equipment.