Basic Characteristics
Appearance: slightly yellow transparent liquid
Ionic: slight cationic
PH value: 4.5-6.5
Solubility: can be dissolved in water at any ratio
Hand feeling: special soft, smooth
Features And Advantages
This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing;
Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect.
Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing;
Dilution and use the method
This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value;
After thinning, you can use exhausting method and continuous padding method,
Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180
Package And Storage
50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 60 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package and Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 60 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package and Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic Characteristics
Appearance: slightly yellow transparence liquid
Ionicity: Cationic
PH value: 4.5-6.5
Solubility: can be can be dissolved in water at any ratio
Hand feeling:instantly hydrophilic
Features And Advantages
This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric;
1.This product is particularly suitable for processing cotton or polyester-cotton fabric, can achieve instantaneous hydrophilic effect, hand feeling general;
2.This product can be used as antistatic agent for chemical fiber fabric; cationic strong, and anion may occur coagulation, application before the need to do the application test, or add the company's specialty products anion and cation anti-coagulation agent;
3.high temperature resistance, suitable for a variety of processing technology, will not bring sticky roller, high suction rate; without APEO.
Usage
1.This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,using after diluting at the recommended ratio1: 2.5 (20% solids) or 1 :5 (10% solids) , and adjust the PH value of acetic acid to 6-6.5; The speed should not be too fast, otherwise the bubble more;
2. After thinning, you can use exhausting method and continuous padding mothod:
Exhausting method: the dosage (20% solids) 1-4% (owf), temperature 30-40 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 10-40g / l, 120 pre-bake, 150-180 stereotypes baking;
Packaging and storage
50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
-
Basic Characteristics
Appearance: slight yellow transparent liquid
Ionic nature: slight cationic
pH value: 4.5-6.5
Solubility:can be dissolved in water at any ratio
Hand feeling: fluffy, soft
Features and advantages
This product is amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber fabrics, such as polyester, nylon, acrylic and blended fabric, feel fluffy soft, smooth better; slightly yellowing, not suitable for bleaching or light-colored fabric;
This product is particularly treated polyester velvet fabric can have a very good fluffy and soft feeling, good degree of fine, can significantly improve the softening of thickened fabric;
Mixed with 803A series silicone oil suitable for cotton paint printing, to enhance the soft; Mixed with M series silicone oil suitable for cotton and poly-cotton knitted fabric feel finishing, feel soft and delicate;
Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO.
Usage
This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning,the recommended using proportion can be diluted 1 :2.5 (20% solids) or diluted 1: 5 (10% solids), do not need to adjust the PH value;
After thinning, you can use exhausting method and continuous padding method.
exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 stereotypes baking;
Packaging and storage
50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Physical and chemical property:
Appearance: Colorless transparent liquid
Ionic properties: Cationic
Active content:53%
Stability: Super Stable
Kind: Finishing
Hand Feeling: Super smooth
Product characteristics
l Soluble in cold water, impart surface smooth, inner soft and elasticity
l Super yellowing-resistant, shearing resistant and warm water washing
l Processing PH range from 1-11, high temperature 90-100 resistant
l Improve sewing ability, especially suitable for cotton woven fabric
l Highly resistant to electrolytes, suitable for resin finishing
l Non-toxic to cellulase
Usage Method
l Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
l Exhausting: 0.5%-2% (O.W.F), 20 minutes
l Adjust dosage according to different fabric and requirements
Package And Storage
l 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical property:
Appearance: Yellowish or Transparent Liquid
Ionic properties: Slight Cation/Nonionic
Solid content: 60 1%
PH value (1% aqueous solution 20): 6-8
Product characteristics
1.Super smooth and soft
2.Especially suitable for polyester fabric and blends
3.Suitable for continuous process techniques, no stick roller
4.Without APEO
Usage Method
Diluted with water at ratio 1:5-7, self-emulsifying.
Exhausting: recommended usage: 2--4% (O.W.F)
Padding: 1540g/l
The special process, please appropriate adjustments according to the samples.
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 12 months of storage expiry.
Physical and chemical properties:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 40 ± 1%
Product characteristics
1.Impart surface smooth, inner soft and elasticity
2.Super yellowing-resistant, shearing resistant and warm water washing
3.Processing PH range from 1-12, high temperature 90-100 resistant
4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel
5.Highly resistant to electrolytes, suitable for resin finishing
6.Suitable for dyeing vat and jet machine processing
Usage Method
Exhausting: 1%-3% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 6 months of storage expiry
Physical and chemical property:
Appearance: Yellowish or Transparent Liquid
Ionic properties: Slight Cation/Nonionic
Solid content: 60 1%
PH value (1% aqueous solution 20): 6-8
Product characteristics
1.Super smooth and soft
2.Especially suitable for polyester fabric and blends
3.Suitable for continuous process techniques, no stick roller
4.Without APEO
Usage Method
Diluted with water at ratio 1:5-7, self-emulsifying.
Exhausting: recommended usage: 2--4% (O.W.F)
Padding: 1540g/l
The special process, please appropriate adjustments according to the samples.
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 12 months of storage expiry.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 99 %
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant
Low foaming and anti-foaming effect
Excellent dirt levitation and grease emulsifying ability
Non-toxic to enzymes, suitable for desizing
Usage Method:
Intermittent procedure: recommended usage: 0.5-2g/l
Continuous procedure: 2-5g/l
Package And Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 99 1%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant
Low foaming and anti-foaming effect
Excellent dirt levitation and grease emulsifying ability
Non-toxic to enzymes, suitable for desizing
Usage Method:
Intermittent procedure: recommended usage: 0.5-2g/l
Continuous procedure: 2-5g/l
Package And Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
#domlongchemical #domlong #textilechemical
Physical and chemical property:
Appearance:Milky LiquidIonic
properties: Special silicon containing polymer,cation
Active content:80%(1:3)
Application:Suitable for all fabrics,especially for blended fabric like Polyester, nylon acrylic and its blends
Product characteristics:
Suitable for all fabrics,especially for blended fabric like Polyester, nylon acrylicand its blends
Super soft and smooth, Soluble in cold water
Low-yellowing, especially suitable for light colored fabrics
Used with three-proofing agents and won't affect its effect
Product Application:
Padding Method:
20-40g/l: 3130B
1g/l:60%: Acetic acid
Mangle Expression:60-80%
Drying(Sizing):In general conditions
Impregnation Method:
2-4%o.w.f.:3130B
pH:5-5.5
Temperature:40
Persistence:20min
For three-proofing finishing softener use:
Dosage depends on different finishing efficiency and hand feeling
10-20g/l:3130B
Drying(Sizing):Normal process conditions
Package And Storage
200kgs per plastic drum,The product is sensitive to cold and high temperatures,do not store below 0 or above 40.Otherwise unrecoverable qualitative changes may occur.If the storage temperature is too high or too low,it should be tested before use.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 53 %
Product characteristics
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90-100 resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Especially suitable for chemical fiber
Smooth: 5 stars
Soft: 4 stars
Fluffy: 4 stars
Elastic : 4 stars
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 53%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
We have numorous products to be applied on cotton, yarn, blankets,polyester fabric,etc.
We have stable client from Pakistan, Indian, Bangladesh and we are developing other market like Turkey and South America.
We have Mature technology and lab for help.
Low-yellowing Organosilicon Softener 3130B
Physical and chemical property:
Appearance: Milky Liquid Ionic
properties: Special silicon containing polymer, cation
Active content:80% (1:3)
Application: Suitable for all fabrics, especially for blended fabric like Polyester, nylon acrylic and its blends
Product characteristics:
Suitable for all fabrics, especially for blended fabric like Polyester, nylon acrylic and its blends
Super soft and smooth, Soluble in cold water
Low-yellowing, especially suitable for light colored fabrics
Used with three-proofing agents and won't affect its effect
Product Application:
Padding Method:
20-40g/l: 3130B 1g/l:60%: Acetic acid
Mangle Expression:60-80% Drying (Sizing): In general conditions
Impregnation Method:
2-4%o.w.f.:3130B pH:5-5.5
Temperature:40 Persistence:20min
For three-proofing finishing softener use:
Dosage depends on different finishing efficiency and hand feeling
10-20g/l:3130B Drying (Sizing): Normal process conditions
Package and Storage
200kgs per plastic drum, the product is sensitive to cold and high temperatures, do not store below 0 or above 40. Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
Appearance: slightly yellow viscous liquid
Ionicity: Cationic
PH value: 6--8
Solubility: self-emulsifying, can be can be dissolved in water at any ratio
Active content: 60%
Hand feeling: Hydrophilic, comprehensive soft,fluffy and smooth
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Physical and chemical property:
Appearance: Clear Yellow Liquid
Ionic properties: Anion
Active content: 100%
PH Value:11.5
Product characteristics
Soluble in cold water
Suitable for all dyeing procedures and also for high temperature dyeing
Super alkali-resistant and acid-resistant
Affinity for dyes and fibers,Good permeability,Excellent dispersion
Good levelness and transfection.
Usage Method
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Physical and chemical property:
Appearance: Clear Yellow Liquid
Ionic properties: Anion
Active content: 100%
PH Value:11.5
Product characteristics
Soluble in cold water
Suitable for all dyeing procedures and also for high temperature dyeing
Super alkali-resistant and acid-resistant
Affinity for dyes and fibers,Good permeability,Excellent dispersion
Good levelness and transfection.
Usage Method
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
DOMLONG OIL-REMOVING AGENT DL1110
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Physical and chemical property:
Appearance: Clear Yellow Liquid
Ionic properties: Anion
Active content: 100%
PH Value:11.5
Product characteristics:
Soluble in cold water
Suitable for all dyeing procedures and also for high temperature dyeing
Super alkali-resistant and acid-resistant
Affinity for dyes and fibers,Good permeability,Excellent dispersion
Good levelness and transfection.
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
HYDROPHILIC SILICONE EMULSION DL3112
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 40 1%
Product characteristics:
Impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-12, high temperature 90c'-100c' resistant
Improve sewing ability, especially suitable for cotton knitting fabric like terry towel
Highly resistant to electrolytes, suitable for resin finishing
Suitable for dyeing vat and jet machine processing
Usage Method:
Exhausting: 1%-3% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
domlong chemical domlong
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Low-yellowing Organosilicon Softener 3130B
Physical and chemical property:
Appearance: Milky Liquid Ionic
properties: Special silicon containing polymer, cation
Active content:80% (1:3)
Application: Suitable for all fabrics, especially for blended fabric like Polyester, nylon acrylic and its blends
Product characteristics:
Suitable for all fabrics, especially for blended fabric like Polyester, nylon acrylic and its blends
Super soft and smooth, Soluble in cold water
Low-yellowing, especially suitable for light colored fabrics
Used with three-proofing agents and won't affect its effect
Product Application:
Padding Method:
20-40g/l: 3130B 1g/l:60%: Acetic acid
Mangle Expression:60-80% Drying (Sizing): In general conditions
Impregnation Method:
2-4%o.w.f.:3130B pH:5-5.5
Temperature:40 Persistence:20min
For three-proofing finishing softener use:
Dosage depends on different finishing efficiency and hand feeling
10-20g/l:3130B Drying (Sizing): Normal process conditions
Package and Storage
200kgs per plastic drum, the product is sensitive to cold and high temperatures, do not store below 0 or above 40. Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
Hydrophilic Silicone Emulsion Dl3112
HYDROPHILIC SILICONE EMULSION DL3112 Physical and chemical property: Appearance: Clear to yellowish Liquid Ionic properties: Cationic Active content: 40% Product characteristics 1.Impart surface smooth, inner soft and elasticity 2.Super yellowing-resistant, shearing resistant and warm water washing 3.Processing PH range from 1-12, high temperature 90-100 resistant 4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel 5.Highly resistant to electrolytes, suitable for resin finishing 6.Suitable for dyeing vat and jet machine processing Usage Method Exhausting: 1%-3% (O.W.F), 20 minutes Adjust dosage according to different fabric and requirements Package And Storage 200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry
Main Components:
Special modified block silicone compound
Appearance: light yellow translucent viscous fluid
Ionicity: weak cationic
PH value: 5-8 (30% water solution)
Solubility: can be dissolved in water at any ratio.
Property & Characteristics
Impart super soft, smooth and fluffy hand feeling for polyester, cotton and blended fabrics.
Good alikali-resisting, salt-resisting and hard water-resisting.
Excellent cost performance.
Application:
Be suitable for polyester, cotton and blended fabrics, also can be for soft finishing of yarn, sweater, socks and other fabrics.
Can be used for dyeing mills and washing plants.
Main Components:
Special modified block silicone compound
Appearance: light yellow translucent viscous fluid
Ionicity: weak cationic
PH value: 5-8 (30% water solution)
Solubility: can be dissolved in water at any ratio.
Property & Characteristics
Impart super soft,smooth and fluffy hand feeling for polyester, cotton and blended fabrics.
Good alikali-resisting, salt-resisting and hard water-resisting.
Excellent cost performance.
Application:
Be suitable for polyester, cotton and blended fabrics, also can be for soft finishing of yarn, sweater, socks and other fabrics.
Can be used for dyeing mills and washing plants.
Physical and chemical property:
Appearance: Colorless to yellow Liquid
Ionic properties: Polysiloxane compound, cation
Active content: 21%
Applicationdurable, hydrophilic, stable with super soft and fluffy hand feel, especially suitable for chemical fiber.
Product characteristics:
Super soft, fluffy, durable, hydrophilic and stable, suitable for fibers
200 high temperature resistance
Excellent shear stability and process safety
Strong anion resistance, pH scope 1-12
Especially suitable for absorption process
Product Application:
Impregnating process: dilute by cold water or warm water under 30, add to finishing bath, adjust the bath pH to 4.5-5.5 by using monoamino-acid(acetic acid, do not use Formic-acid).
1-3% LC (O.W.F)
pH 5.0-5.5(adjusted by acetic acid)
Temperature 40C
Time 20min Drying Under normal conditions< 180 C
Padding process:
10-30 g/l LC
mangle expression 60-80%
Drying Under normal conditions< 180 C
Package and Storage
200kgs per plastic drum, The product is sensitive to cold and high temperaturesdo not store below 0or above 40.Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
HYDROPHILIC SILICONE EMULSION DL3112
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 40%
Product characteristics
1.Impart surface smooth, inner soft and elasticity
2.Super yellowing-resistant, shearing resistant and warm water washing
3.Processing PH range from 1-12, high temperature 90??-100?? resistant
4.Improve sewing ability, especially suitable for cotton knitting fabric like terry towel
5.Highly resistant to electrolytes, suitable for resin finishing
6.Suitable for dyeing vat and jet machine processing
Usage Method
Exhausting: 1%-3% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun
exposure, 6 months of storage expiry
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 99 %
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant
Low foaming and anti-foaming effect
Excellent dirt levitation and grease emulsifying ability
Non-toxic to enzymes, suitable for desizing
Usage Method:
Intermittent procedure: recommended usage: 0.5-2g/l
Continuous procedure: 2-5g/l
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage:
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 60 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90C'-10C' resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package and Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Basic Characteristics
Appearance: slightly yellow viscous liquid
Ionicity: Cationic
pH value: 6--8
Solubility: self-emulsifying, can be can be dissolved in water at any ratio
Active content: 85 1%
Hand feeling: instantly hydrophilic, comprehensive feel better
Features And Advantage
This product is cationized amino and polyether modified multi-copolymer block silicone oil, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for bleaching or light-colored fabric;
It is particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel;
It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;.
Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO.
Usage
first adding isomer alcoholether 1306 emulsifier, then add cotton MBS 9908 (recommended 9908: emulsifier = 4-6: 1), mix well and then add 1-1.5% glacial acetic acid; then slowly add water to the desired concentration., the recommended use ratio can be diluted 1: 5 (20% solids) or 1 : 10 (10% solids) , the appearance of colorless transparent liquid;
After thinning, you can use exhausting method and continuous padding method,
Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min,bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180stereotypes baking;
Packaging and storage
50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for one year.
Basic Characteristics
Appearance: slightly yellow to colorless viscous liquid
Ionicity: Cationic
PH value: 4.5-6.5
Solubility: can be can be dissolved in water at any ratio
Active content: 42 1%
Hand feeling: instantly hydrophilic, comprehensive feel better
Features And Advantages
Hand feeling: instantly hydrophilic, comprehensive feel better
This product is cationized amino and polyether modified multi-copolymer block silicone oil emulsion, especially suitable for processing all kinds of chemical fiber, cotton, wool and blended fabric, does not affect the fabric itself hydrophilic; no yellowing, suitable for b leaching or light-colored fabric;
Itis particularly suitable for processing cotton and polyester-cotton fabric, can achieve instantaneous hydrophilic effect, but also has a certain soft, smooth hand feel;
It can be used as antistatic agent for chemical fiber fabric; cationic strong, it with anion may occur coagulation, please make a trial or test a sample before application, or add our company's specialty products anion and cation anti-coagulation agent;.
Suitable for continuous processing of the process, will not bring sticky roll; also suitable for padding method, high suction rate; without APEO.
Usage Method
This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended use ratio can be diluted 1: 2.5 (20% solids) or 1 : 5 (10% solids) , do not need to adjust the pH value, the appearance of colorless transparent liquid;
After thinning, you can use exhausting method and continuous padding method,
Exhausting method: the dosage (20% solids) 0.6-2% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40;
Padding method: the dosage (20% solids) 6-20g / l, 120 pre-bake, 150-180 stereotypes baking;
Packaging and storage
50kg or 200kg plastic drums. Should be stored in a cool ventilated warehouse, to prevent exposure, storage period for half a year.
Appearanceslightly yellow viscous liquid
IonicityCationic
PH value6--8
Solubilityself-emulsifying, can be can be dissolved in water at any ratio
Active content30 1%
Hand feelingHydrophilic, comprehensive soft,fluffy and smooth
50pcs/box
40 boxes per ctn
HYDROPHILIC SILICONE EMULSION DL3111
Physical and chemical property:
Appearance: Clear to yellowish Liquid
Ionic properties: Cationic
Active content: 53 1%
Product characteristics:
Soluble in cold water, impart surface smooth, inner soft and elasticity
Super yellowing-resistant, shearing resistant and warm water washing
Processing PH range from 1-11, high temperature 90-100 resistant
Improve sewing ability, especially suitable for cotton woven fabric
Highly resistant to electrolytes, suitable for resin finishing
Non-toxic to cellulase
Usage Method:
Padding recommended usage: 5-20g/l, 1g/l acetic acid as well
Exhausting: 0.5%-2% (O.W.F), 20 minutes
Adjust dosage according to different fabric and requirements
Package And Storage:
200kgs per plastic drum, store in a cool and ventilated warehouse, avoid sun exposure, 6 months of storage expiry.
Physical and chemical property:
Appearance: Clear Liquid
Ionic properties: Non-ionic
Active content: 100%
Product characteristics:
Soluble in cold and warm water
Super alkali-resistant and acid-resistant
Low foaming after temperature up to 70
High concentration detergent with dispersing and emulsifying properties
Non-toxic to enzymes, high surface activity
Usage Method:
Polyester and nylon fabric procedure: recommended usage: 0.5-1.5g/l
Using 2-3g/L oxalic acid to get excellent washing effect for polyester
Package And Storage
200kgs per plastic drum, this product will solidify if stored below 0 C for a long time, heated to 20-25 C and stirred for normal use.
Physical and chemical property:
Appearance: Colorless to yellow Liquid
Ionic properties: Polysiloxane compound, cation
Active content: 21%
Applicationdurable, hydrophilic, stable with super soft and fluffy hand feel, especially suitable for chemical fiber.
Product characteristics:
Super soft, fluffy, durable, hydrophilic and stable, suitable for fibers
200 high temperature resistance
Excellent shear stability and process safety
Strong anion resistance, pH scope 1-12
Especially suitable for absorption process
Product Application:
Impregnating process: dilute by cold water or warm water under 30, add to finishing bath, adjust the bath pH to 4.5-5.5 by using monoamino-acid(acetic acid, do not use Formic-acid).
1-3% LC (O.W.F)
pH 5.0-5.5(adjusted by acetic acid)
Temperature 40 C
Time 20min Drying Under normal conditions< 180 C
Padding process:
10-30 g/l LC
mangle expression 60-80%
Drying Under normal conditions< 180 C
Package and Storage
200kgs per plastic drum, The product is sensitive to cold and high temperaturesdo not store below 0or above 40.Otherwise unrecoverable qualitative changes may occur. If the storage temperature is too high or too low, it should be tested before use.
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth:
Soft:
Fluffy:
Elastic :
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
Basic characteristics
Appearance: light yellow transparent liquid
Ionic nature: slight cationic
Solubility: can be dissolved in any proportion of water
Emulsifying ability: self emulsifying
Application areas
Especially suitable for chemical fiber
Smooth: 5
Soft: 5
Fluffy: 5
Elastic : 5
Note: five stars are the best!
Emulsification method: (take 100 kg M06-30% as an example)
M06 30kg
Glacial acetic acid 1.2 kg
Pure water 68.8 kg
Firstly, stirring the M06 and glacial acetic acid, then slowly add the measured water while stirring.
Note: If need emulsion of content
