Product Description
1.Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional)
14. Support infrared photocell for anti-pinch and reset function (optional)
Product Description
Intelligent Sliding door through years of careful development, research and production of intelligent channel management equipment, mainly for personnel access to the intelligent management of high-tech products.The equipment organically integrated mechanical, electronic, microprocessor control, and a variety of identity recognition technology.
Technical:
1.Chassis material: domestic standard 304 stainless steel dimensions: 1400 L * 320 W * 1000 high (MM)
2.Power supply voltage: AC220 ± 10%V, 50HZ
3.Drive motor:Brushless DC motor 24V
4.Input interface:+DC 12V level signal or DC 12V pulse signal(pulse width>100ms)dirve current> 10 mA
5.Time required to enter the access state on power:3 second
Specifications
1. All items have 12 months quality guarantee.
2. Custom design shape and logo, for large amount, custom logo is available.
3. Supported by professional engineers.
4. Special discount of our distributors or agents in their area.
5. Packing in standard export carton, paper carton and wooden cases.
6. CE available.
MaterialCold-rolled plate and Paint  Dimensions1000(L)*280(W)*1000(H)mm
Stainless steel thicknessstandard 1.5mm, can be thickenedPowersingle movement 50W
Arm length510mm outside the boxPower supplyAC22±10%V, 50HZ
Tolerance of arm80KgNormal life5 millions times
Pass speed30-40 people/minuteGate opening time0.2 seconds
Communication interfaceTCP/IP or RS485Input interfaceDry contact signal or 12V level signal
MOQ1 pieceCertificationCE
Speed Gate features and function of :
304stainlesssteel,Appearancedesign,generous,beautiful,humanizeddesign.Appearancecanbecustomized;
High-performanceintegratedcontrolpanel,stronganti-interferenceability,StabilitySystem,Drivemoduledoesnotheat,Lowpowerconsumption;
BysmallbuttonsonSRU,cansetthedevice'soperatingstatus;
AntiPinch,antibumpsfunction:Whenobstaclesencounteredintheprocessofarmresetting,motorstopsoropenagain;
Scourprotectionfunction:Whentheopensignalisnotreceived,armwillbelockedafter5degreesrotation;
Automaticresetfunction:Afterturnstileopened,notpasswithinaspecifiedperiodoftime,thesystemwillautomaticallycanceltheaccessprivilegesofusers;
Readthecardwithmemoryandwithoutmemoryfunction:Userscanbesetusingthekeyboardaccordingtotheirneeds;
Audiblealarmfunction:Includingunlawfulentry,trailingalarm;
6---10pairsofinfraredsensorstodetectthetrailingandantipinch;
Uniquedesign,perfectcontroltechnology,beautifulanddistinguisheddesign,makingproductsfrequentlyfavoredbydomesticandforeignhigh-endusers.
Speed Gate technical parameters of :
Dimensions:(L)1400(W)140(H)1000(mm);
Stainlessthickness:standard1.5mm,Canthicken;
Turnstilecomponents:cabinet,arm,movement,controller,encoder,electromagneticbrake,glasspanel;
Swingarmlength:300-600mm;
Transmissionarmangle:180degree;
Swingdirection:One-wayortwo-way;
Technical parameters:
Product Sizeï1500*1350*2300mm
Materialï304 stainless steel turnstile gate
Thickness of steelï1.5mm
Channel Widthï700mm
Power supply voltageïAC220 ± 10%V, 50HZ
Passing speedï< 40 person/min
Gate open timeï0.2 second
Feature of productï
1.Fault detection,user-friendly maintenance and use
2.Bidirection, or one direction permitted, one forbidden, or one direction need card reader, one for free.
3.Free movement in both directions without power, power lock function automatically restore on power in case of emergency.
Swing turnstile can be divided into fully automatic swing turnstile and manual swing. Fully automatic product can finish any work by power. The swing arm will automatically open when it is powered off. And the arm will automatically be closed when power is turned on again.
Technical parameters:
Framework:304(standard)/316 grade stainless steel
Size:1400*190*1000mm
Channel Width600mm
Weight80kg.
Operating Modeone-way or two way control
Power supply voltage AC220 ± 10%V, 50HZ
Motor0.5NM/24V(Fully Automatic)
Interfacestandard RS485/distanc 1200m or TCP/IP.
Gate opening time0.2 second
Transit speed30-40 persons per minute
Working environmentindoor or outdoor
Temperature-10 Celsius to 50 Celsius
Relative humidit¤90% no condensation
Protection GradeIP54
Product Description
1.Fault detection analarm functions easy to use anmaintenance
2. The running status can be programmeancontrollewith the built-in keyboaron the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process motors will stop working automatically within the prescribetime anreset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is lockeautomatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Shoulthe user fail to pass within the prescribetime (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be usewith variety of carreaders: IC / Icarreaders bar codes fingerprints etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LEdirection indicator
11. Gate auto opens when power off anauto close when power on complying with fire safety
Requirements
12. Alarm function in case of illegal intrusion anreverse intrusion etc.
13. Counter function (optional)
14. Support infrarephotocell for anti-pinch anreset function (optional)
Product Description
1.Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional)
14. Support infrared photocell for anti-pinch and reset function (optional)
Product Description
1.Fault detection an alarm functions, easy to use an maintenance
2. The running status can be programme an controlle with the built-in keyboar on the main board
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribe time an reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locke automatically until opening signal received
5. Synchronization functions (for dual gate equipments)
6. Automatic reset function. Shoul the user fail to pass within the prescribe time (default time is 5 seconds),the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be use with variety of car readers: IC / I car readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction
10. LE direction indicator
11. Gate auto opens when power off an auto close when power on, complying with fire safety
Requirements
12. Alarm function, in case of illegal intrusion an reverse intrusion, etc.
13. Counter function (optional)
14. Support infrare photocell for anti-pinch an reset function (optional)