Product Description 1.Fault detection and alarm functions, easy to use and maintenance 2. The running status can be programmed and controlled with the built-in keyboard on the main board 3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset) 4. Anti-breakthrough function. The gate is locked automatically until opening signal received 5. Synchronization functions (for dual gate equipments) 6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),the system will cancel the authority of the current user automatically 7. Gate can be set as normally open or normally closed 8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed) 9. Direction can be set as single-direction or bi-direction 10. LED direction indicator 11. Gate auto opens when power off and auto close when power on, complying with fire safety Requirements 12. Alarm function, in case of illegal intrusion and reverse intrusion, etc. 13. Counter function (optional) 14. Support infrared photocell for anti-pinch and reset function (optional)
Product Description Intelligent Sliding door through years of careful development, research and production of intelligent channel management equipment, mainly for personnel access to the intelligent management of high-tech products.The equipment organically integrated mechanical, electronic, microprocessor control, and a variety of identity recognition technology. Technical: 1.Chassis material: domestic standard 304 stainless steel dimensions: 1400 L * 320 W * 1000 high (MM) 2.Power supply voltage: AC220 ± 10%V, 50HZ 3.Drive motor:Brushless DC motor 24V 4.Input interface:+DC 12V level signal or DC 12V pulse signal(pulse width>100ms)dirve current> 10 mA 5.Time required to enter the access state on power:3 second
Technical parameters: Product Sizeï1500*1350*2300mm Materialï304 stainless steel turnstile gate Thickness of steelï1.5mm Channel Widthï700mm Power supply voltageïAC220 ± 10%V, 50HZ Passing speedï< 40 person/min Gate open timeï0.2 second Feature of productï 1.Fault detection,user-friendly maintenance and use 2.Bidirection, or one direction permitted, one forbidden, or one direction need card reader, one for free. 3.Free movement in both directions without power, power lock function automatically restore on power in case of emergency.
Swing turnstile can be divided into fully automatic swing turnstile and manual swing. Fully automatic product can finish any work by power. The swing arm will automatically open when it is powered off. And the arm will automatically be closed when power is turned on again. Technical parameters: Framework:304(standard)/316 grade stainless steel Size:1400*190*1000mm Channel Width600mm Weight80kg. Operating Modeone-way or two way control Power supply voltage AC220 ± 10%V, 50HZ Motor0.5NM/24V(Fully Automatic) Interfacestandard RS485/distanc 1200m or TCP/IP. Gate opening time0.2 second Transit speed30-40 persons per minute Working environmentindoor or outdoor Temperature-10 Celsius to 50 Celsius Relative humidit¤90% no condensation Protection GradeIP54
Product Description 1.Fault detection analarm functions easy to use anmaintenance 2. The running status can be programmeancontrollewith the built-in keyboaron the main board 3. Mechanical antipinch function. If the gate meets resistance in the reset process motors will stop working automatically within the prescribetime anreset again after the default delay (till fully reset) 4. Anti-breakthrough function. The gate is lockeautomatically until opening signal received 5. Synchronization functions (for dual gate equipments) 6. Automatic reset function. Shoulthe user fail to pass within the prescribetime (default time is 5 seconds),the system will cancel the authority of the current user automatically 7. Gate can be set as normally open or normally closed 8. Can be usewith variety of carreaders: IC / Icarreaders bar codes fingerprints etc. (Access controller needed) 9. Direction can be set as single-direction or bi-direction 10. LEdirection indicator 11. Gate auto opens when power off anauto close when power on complying with fire safety Requirements 12. Alarm function in case of illegal intrusion anreverse intrusion etc. 13. Counter function (optional) 14. Support infrarephotocell for anti-pinch anreset function (optional)
Specifications 1. All items have 12 months quality guarantee. 2. Custom design shape and logo, for large amount, custom logo is available. 3. Supported by professional engineers. 4. Special discount of our distributors or agents in their area. 5. Packing in standard export carton, paper carton and wooden cases. 6. CE available. MaterialCold-rolled plate and Paint  Dimensions1000(L)*280(W)*1000(H)mm Stainless steel thicknessstandard 1.5mm, can be thickenedPowersingle movement 50W Arm length510mm outside the boxPower supplyAC22±10%V, 50HZ Tolerance of arm80KgNormal life5 millions times Pass speed30-40 people/minuteGate opening time0.2 seconds Communication interfaceTCP/IP or RS485Input interfaceDry contact signal or 12V level signal MOQ1 pieceCertificationCE
Speed Gate features and function of : 304stainlesssteel,Appearancedesign,generous,beautiful,humanizeddesign.Appearancecanbecustomized; High-performanceintegratedcontrolpanel,stronganti-interferenceability,StabilitySystem,Drivemoduledoesnotheat,Lowpowerconsumption; BysmallbuttonsonSRU,cansetthedevice'soperatingstatus; AntiPinch,antibumpsfunction:Whenobstaclesencounteredintheprocessofarmresetting,motorstopsoropenagain; Scourprotectionfunction:Whentheopensignalisnotreceived,armwillbelockedafter5degreesrotation; Automaticresetfunction:Afterturnstileopened,notpasswithinaspecifiedperiodoftime,thesystemwillautomaticallycanceltheaccessprivilegesofusers; Readthecardwithmemoryandwithoutmemoryfunction:Userscanbesetusingthekeyboardaccordingtotheirneeds; Audiblealarmfunction:Includingunlawfulentry,trailingalarm; 6---10pairsofinfraredsensorstodetectthetrailingandantipinch; Uniquedesign,perfectcontroltechnology,beautifulanddistinguisheddesign,makingproductsfrequentlyfavoredbydomesticandforeignhigh-endusers. Speed Gate technical parameters of : Dimensions:(L)1400(W)140(H)1000(mm); Stainlessthickness:standard1.5mm,Canthicken; Turnstilecomponents:cabinet,arm,movement,controller,encoder,electromagneticbrake,glasspanel; Swingarmlength:300-600mm; Transmissionarmangle:180degree; Swingdirection:One-wayortwo-way;
We make customized rolling, sliding gates, collapsible gates for home, commercial building factories etc. These gates come in Aluminum, Stainless Steel or in Steel. The surface is powder coated to last many years after installation. These gates can be installed on tracks or without tracks. Every aspect of the gates can be customized. These gates are easy to operate with minimal effort. Our standard dimensions Height 1600mm (height can customized) Stretching ratio: 1:0.17 + 0.42 (can be customized) Gate Minimum length :2 Meters Gate Maximum length: upto 90 meters ( double Gates) Operation: Hand operated, Motorized. Colors available: Blue, Red (colors can be customized) Please contact us for competitive pricing.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).