Custom mounting brackets available.
- Ideal for fluid transfer application which require high accuracy and repeatability.
- Pump head is compact and simple in design with same side tubing entry/exit.
- Perfect for space-limited applications.
- Pump heads are compact and easy to integrate into your OEM applications.
- Call for more information on our OEM services.
A vending milk-dispensing machine designed for unassisted dispensing of cooled fresh milk by the customers.
It allows dispensing milk into PET bottles with the capacity of up to your required volume. The machine is installed in shopping
malls and supermarkets.
The peristaltic pump is an important part of the milk vending machine, The peristaltic pump can transfer milk from the big
container to your own bottles after your put in a coin or swipe a card, It also requires an app in the milk machine, But we don't
think that would be too difficult for you who specialize in making milk vending machines.
Our Peristaltic pump, the model such as OEM210/WP500 and OEM208/KZ25 are all widely used in milk vending machines all over the
world, customers from Europe, Asia, America, and so on. All with good feedback. There are DC12V or DC24 V, just choose the one you
want. It Can be customized according to your flow rate requirements.
Just contact us if any question, we are always at your service.
Quick information
Brand name:chuang rui
Place of origin:china
Power :electric
Standard or nonstandard :standard
Price condition :fob
Description
Product description:
1.Doses each capable of being set for either individual days and times, individual times every day of the week (all) or off.
2.Dose setting in ml (can be individually calibrated by user if required).
3.Ecurity lock feature which d
1.Approx 100ml/ min pump ou tput when using 6mm id pump tube.
2.Installation instru ction s: remove all packaging. Mount rear of case to wall using fixing plugs and screws supplied. (do not over tighten). Fit cas
e lid hol e caps.
3.When the disp3 000 is set pipe up system using parts provided in the kit. The tube should then be positioned in the feed bottle. The remainder of the flexible pipe should be run to the injection point. Once primed the unit is ready to operate.
Price
Delivery port :tianjin
Packaging & delivery
Packing :carton with plastic foam, make sure the peristalti
Delivery lead time :shipped in 3-7 days after payment (except for special customization)
Supply ability :2000sets/month
1 This intelligent programmable Peristaltic Liquid Pump CT6000 can be installed by YZ1515x Peristaltic Pump Head..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in Englishand Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
Peristaltic Tube Pump Parameter
Model CT6000 Display Mode LCD
Speed Range 0.1-600 rpm Control Method touch screen+keypad
speed resolution 0.1 rpm Suckback angle 10~720 (1 Stepping)
Max Flow 0.007-2280ml/min Suchback speed 10-300 rpm
Filling Accuracy ±0.5% Motor Type Stepper motor
Environment Temperature 0-40 External control
Start & stop, direction control, speed control
( Analog control :0-5v, 0-10v, 4-20mA optionl )
RS232 and RS485 Communication interface, support MODUBUS Communication Protocol
Relatively Humidity
Small Peristaltic Pump model
Custom mounting brackets available.
- Ideal for fluid transfer application which require high accuracy and repeatability.
- Peristaltic Pump Head is compact and simple in design with same side tubing entry/exit.
- Perfect for space-limited applications.
- Peristaltic Liquid Pump heads are compact and easy to integrate into your OEM Dosing Pump applications.
- Call for more information on our OEM Peristaltic Tube Pump services.
OEM Peristaltic Pump Product Description
chuangrui easy install OEM Small Peristaltic Pump for bioreactor
Compact structure design, simple installation design, and good working performance, widely used in various liquid processing
equipmentThe OEM206 Peristaltic Liquid Pump has superb features built-in and flexible design to meet specific customer needs.
Peristaltic Tube Pump Typical Application
* Washing machine matching
*COD water treatment
* Detergent Liquid Transferring
*Bio reactor
small Basic Peristaltic Pump
Custom mounting brackets available.
- Ideal for fluid transfer application which require high accuracy and repeatability.
- Peristaltic Pump Head is compact and simple in design with same side tubing entry/exit.
- Perfect for space-limited applications.
- Pump heads are compact and easy to integrate into your OEM applications.
- Call for more information on our OEM services.
1. Vials Filling Peristaltic Pump can be installed by KZ50 pump heads.etc..
2. With both-way large torque, high power motor. The Peristaltic Liquid Pump can be connected with 2 pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. Color LCD display in English and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
The OEM 202 tumescent infiltration liposuction transfer peristaltic pump have superb features built-in and flexible design to meet specific customer needs.Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM peristaltic pump powerful functions.
The OEM 202 Small Peristaltic Pump is widely used in liquid transfer.You will often find these Peristaltic Tube Pumps in vending machines, soft serve ice cream machines, printers, ink machines, e-liquid filling machine and other liquid transfer field.
With DC 12V/24V motor, the OEM Peristaltic Pump 202 can install 2 kinds of tubes to meet different flow requirements, can handle with sticky liquid.
The speed of OEM Peristaltic Pump can be customized, the shell of 12v Peristaltic Pump Head is made of PPS material and the roller is made of 304 SSS material, and the speed control function is optional.
Pumping and dosing buffer solutions or other fluids are common tasks performed by laboratories worldwide. So the Laboratory Peristaltic Pumps are the necessary instruments. Making sure that liquids are transferred with high precision and remain free of contamination are key challenges in handling liquids using Peristaltic Liquid Pump. Moreover some pump designs, such as those containing valves, are prone to contamination or even jamming when handling certain fluid types such as viscous liquids or suspensions. This is why peristaltic tube Dosing Pump is increasingly becoming the first choice for laboratory tasked with dispensing different fluids.
Today,Dosing and Metering Pumps are used for numerous applications, from filling small vials to pumping concrete.
1. The Peristaltic Tube Pump CF6000 can be installed by YZ1515x YZ2515x Peristaltic Pump Head.etc..
2. With both-way large torque,high power motor. It can be connected with several Peristaltic Liquid Pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. Color LCD display in English and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available
Small OEM Peristaltic Pump AC380V
GL350 with high flowrate with 35L/min.
Can transfer some thick liquid.
The industrial big flow rate high precision peristaltic pump head YZ35-13 is made of PPS(polyphenylene sulfide ether) materials, so its rigidity and structure are more excellent.
Its strong capabilities of baring high temperature and erosion, especially the excellent performance in the aspects of strongchemical resistance, such as resisting organic solvent, effectively reducing the damage rate of the pump heads and the customers'cost in maintaining and reparing.
UTF01 is a filling peristaltic pump independently developed by Chuangrui Pump. It consists of an intelligent filling system and the main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which can be expanded up to 32 channels. UTF01 can be installed with multiple types of pump heads and adapted to multi-specification tubes, which can fully meet customer application needs and provide more flow selection. Various functions, large screen display, touch screen operation, accurate flow, make filling production more peace of mind. Multiple channels can be opened at the same time for liquid filling, or the filling value of each channel can be set individually for filling. Support customized solutions.
Technical Parameter
Model: ZG600
Pump Head: Yz35-13
Speed range: 60-600 rpm (reversible)
Speed resolution: 1rpm
Flow Rate: Max 12L/min
Power:
Peristaltic pump CM1000/YZ1515X Flow range is 0.007~380ml/min/channel. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers. FULL SPEED button available for filling in & emptying out. Good capability price rate. Not suitable when used in the open air.
Function & Characteristics
1. With liquid calibration function to ensure the high accurancy liquid transfer.
2. With both-way large torque high power motor. It can be connected with several pump heads to meet different flow rates.
3. Long life digital rotary knob easy to operate high control precision and ensure to transfer the high precision fluid.
4. FULL SPEED button is available to fill in & empty out the tubing.
5. Memory function available in case of power off and it will continue working once the power was restarted.
6. Long-range control is available through the DB15 interface of the drive: speed control start-stop control direction control.
7. With RS485 communication interface supports MODBUS communication protocol. And communication protocols customized is available.
Timer and quantitative function detergent dosing pump with battery powered
Our Disp3000 micro peristaltic pump pump are in use worldwide giving dependable service. The unit has been used for dosing drains and grease traps, urinals, and in film processors, and many other dosing applications requiring reliability and ease of use. Due to the range of tubing materials available the unit can be used in a great variety of applications. The Disp3000 range of units are a new addition to our range and offer greater versatility and functionality in both the battery operated version described here and in 110v or 220v mains voltage versions.
China crpump battery operated small peristaltic hose pumps.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
SC600-2 Portable Peristaltic Pump retains its own advantages of Peristaltic Pumps, single-tube single-use quick loading, and unloading, no cross-contamination; wide flow processing range, forward and reverse operation is reversible. Replaceable charging
Power supply, light, and portable, flexible operation, can easily handle stratified sampling, deep water sampling, indoor and outdoor sampling of gas samples, high-viscosity liquids, small particle suspension liquids, etc., especially suitable for the field
Environmental operations.
Battery Powered Peristaltic Pump is suitable for environmental monitoring stations, water treatment, gas and liquid, layered sampling, collection of medical-grade specimens, and other fields.
Electric Explosion Proof Peristaltic Pump.Can be installed large flow pump head with maximum flowrate of 12000ml/min (single channel).
A sharp explosion peristaltic pump can be mounted high flow pump head. Speed can be adjusted manually adjust the speed planetary CVT. Used in various environments, in particular, the requirement to use explosion-proof environments.
Explosion-proof pumps are also used to move gasoline, diesel fuel, oil, ground water, potable water, salt water, wastewater, sewage, sludge, slurry and ash slurry, gas and air, powders, and rendering wastes, a variety of liquids, liquids with solids, etc.
Micro Flow Lab design Multiple Channels Peristaltic pump head
Atomic fluorescence analyzer
The DG series micro-flow multi-channel peristaltic pump head is a separate card installation and special hose; the pressure tube
gap can be fine-tuned to adapt to different wall thickness hoses. Designed for small flow, multi-channel fluid delivery.
1. CR peristaltic pump BT600FC can be installed by LP25-6 YZ1515x, YZ2515x, DG series pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English,Russia,Brazil and Chinese version, touch screen control.
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
2 nozzles 4 nozzles 6 nozzles Multiple Channels Liquid Filling Peristaltic Pump
This multiple channels filling peristaltic support PLC control which can work with your packing machine.
Support Nozzles number customized to meet your production requirement .
UTF01 is a filling peristaltic pump independently developed by Chuangrui Pump. It consists of an intelligent filling system and the main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which can be expanded up to 32 channels. UTF01 can be installed with multiple types of pump heads and adapted to multi-specification tubes, which can fully meet customer application needs and provide more flow selection. Various functions, large screen display, touch screen operation, accurate flow, make filling production more peace of mind. Multiple channels can be opened at the same time for liquid filling, or the filling value of each channel can be set individually for filling. Support customized solutions.
Micro Coolant Liquid Transfer Peristaltic Pump
This OEM Peristaltic Pump can work with AC220V synchronous motor
1.The TH15 Peristaltic Dosing Pumps have superb features built-in and flexible design to meet specific customer needs.
2.Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM Small Peristaltic Pump a good performance.
Application:
Environmental Protection Equipment,Discharge of flue gas analyzer,Delivery liquid into the fermentation tank
Basic Peristaltic Pump Functions and features
*A special part links the roller box with the motor shaft to ensures stable
*Snaps into the tube, not slippery silk, more fixture
*Crust use streamlined design, With card bit, easily snaps into the Peristaltic Liquid Pump
. Easy to change and fix the tubing. Occlusion can be adjusted slightly by ratchet wheel.
* Small size, compact and robust design
* Trouble-free continuous tube loading in seconds
* Reliable performance without any operator adjustments
* Safe and closed with visible rotor movement
* Spring-loaded operation for good pressure control
* 2 roller pump head, low pulsation
* Smooth, cog-free operation
Noted:Run clockwise can get large flow,and operation counterclockwise can get biger outlet pressure.
Load import tube or harder tube,please counterclockwise operation to increase the pressure tube torque.
BT600FC-S is a intelligent flow rate bottle filling peristaltic pump specially used for filling, with 3.5 inch touch screen which is easy operate and intelligent. The intelligent flow rate bottle filling peristaltic pump BT600FC-S is very suitable for vial filling, can fill many kinds of liquid. The max flow rate is 6000ml/min. It can use pump head KZ25.
As a Vials Filling Peristaltic Pump, BT600FC-S Normally used in the fields such as Pharmaceutical filling peristaltic pump, Food filling pump, University laboratory, Water treatment pump , Cosmetic filling pump , Beverage filling pump, etc.
The Peristaltic Pump BT600FC-S is one of the most hot-selling models of CRPUMP, because there are many advantages such as the accuracy, handiness,easy-clean,ergonomic working, etc.
Except control it by the button, also support external control such as 0-5v, 0-10v,4-20mA, etc. Customers also can control thePeristaltic Liquid Pump by foot pedal. Support RS485 or RS232, just tell us which you want. There are professional R&D team which can customize according to customersâ?? requirement.
1. The Peristaltic Tube Pump can be installed by YZ1515x YZ2515x Peristaltic Pump Head.etc..
2. With both-way large torque,high power motor. It can be connected with several Peristaltic Liquid Pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate,
4. Color LCD display in English and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available
Milking Vending Machine OEM Peristaltic Pump product description
Our OEM Small Peristaltic Pump 204 model High quality mini DC Peristaltic Liquid Pump with speed regulator with flow rate up to 1740mL/min, transparent PC plastic shell. It is convenient for observing the work situation of Peristaltic Pump Head. The roller adopts 304 stainless steel, can work long time with high speed.
OEM Peristaltic Dosing Pumps Features:
*304SSS roller
*Transparency Peristaltic Pump Head,can check the liquid work status easily.
*With L bracket and installation screw holes ,easy to install.
*Support bracket customized,that means we can design and produce the suitable bracket to meet your installation requirement .
*The flow with silicon tube 24# can reach 1740 ml/min and the liquid based on water .
Noted: The thick liquid will cause the flow become slow
Smart filling peristaltic pump BT600FC has flow range from 0.007-2280ml/min. This flow range covers normally situation for consumers usage.The Peristaltic Liquid Pump has storage function can save 9 groups of data. One key into the storage interface, you can quickly find the original filling data. There are optional external control: multiple mode options: communication mode, analog mode, pedal switch control. Customized services are provided. Storage function data will be stored in time after power failure. After power is restored, the Dispensing Peristaltic Pump can remember the parameter Settings before the power is turned off, making it safer and more reliable. Calibration function - Intelligent flow calibration: After setting the target flow, input the actual flow value, and the system will automatically calibrate the flow to ensure the accuracy of the flow. Full speed function: one-button control of full speed operation for quick cleaning, filling and emptying of pipes, etc. Reverse suction function: Prevent liquid from dripping and ensure fluid accuracy by setting reverse suction Angle and reverse suction speed.Lock screen function Lock screen design, anti-wrong touch, more safe application. Real-time function animation is displayed on the operation interface, showing the running state and working parameters. Touch screen: 3.5-inch color LCD screen (Chinese and English optional), intuitive and intelligent touch screen operation. Integral housing design: Stainless steel housing, durable, multi-faceted seamless integrated housing design, long service life, cost-effective.
The compact structure filling machine peristaltic pump head KZ25 is designed for middle flow rates, multi-channel fluids transfer. Easy to change and fix the tubing.
Occlusion can be adjusted slightly. The rollers adopt 304sss materials. The Peristaltic Liquid Pump head consists of base, rotor assembly and easily dismounted cartridge.
The Peristaltic Pump head housing is available in PC, ABS+PPS or PPS. Suitable for a variety of medium flow liquid transfer and filling
Basic Peristaltic Pump Head Featuresï¼?
1. The Dispensing Peristaltic Pump head is the most economical and practical pump head.
2. Structure is simple easy to install no need to adjust.
3. KZ25 three rollers to provide greater flow.
4. Maximum hose diameter up to 9.6 mm.
The food grade filling liquid peristaltic pump tube's material is platinum vulcanized silicone.The Peristaltic Liquid Pump tube is extruded from special silica gel material through high temperature and high pressure, with smooth inner cavity and accurate size.The Peristaltic Metering Pump tube can meet the food hygiene, drug iodine, medical and other testing standards.It has the advantages of high abrasion resistance, high tear resistance, high resilience and so on.
How to select a Dosing Pump tube:
1. The best way to select a tube is that to decide which materials are chemically suitable at first, and then choose the one which best meets the physical demands of the application.
2. For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed.
3. Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed.
Saint-Gobain pressure-resistant peristaltic pump tube Norprene A-60-F can withstand the high temperatures that occur during food and beverage processing, and is more durable than other food hoses and has better performance. Even if it is exposed to high temperature and ozone, Saint-Gobain pressure-resistant peristaltic pump tube Norprene A-60-F will not crack or deteriorate like traditional rubber pipes.
Saint-Gobain pressure-resistant peristaltic pump tube Norprene A-60-F is very flexible and can withstand bending and maintain its shape during quick and easy installation. Its excellent resistance to bending fatigue makes it the best choice for peristaltic pump tubing often used in batching equipment.
The small peristaltic pump adopts a 4-rotor roller structure, low pulsation, high precision, and single-channel and dual-channel options, suitable for various analytical instruments, monitoring instruments and other equipment The Microflow Peristaltic Pump head is changed to adopt elastic pressure tube, pressure is self-adaptive, and the service life of the hose is improved. Snap-in tube installation type for , eliminating the trouble of installing pipe clamps or joints, and easily remove the hose
The Peristaltic Pump Head is changed to adopt elastic pressure tube, pressure is self-adaptive, and the service life of the hose is improved. Snap-in pressure pipe, eliminating the trouble of installing pipe clamps or joints, and easily remove the hose.
It can work with 4 different size tube which meet flow range 0-53 ml/min
UTF03 is a filling peristaltic pump independently developed by Chuangrui Pump Industry. It consists of an
intelligent filling system and a main controller. The standard drive unit is 4 channels, which can be expanded
up to 32 channels. UTF03 is suitable for industrial pump head, which can handle precise filling of large flow
liquids. Various functions, large screen display, touch screen operation, accurate flow, make filling production
more peace of mind .
Model: WT600/KZ25
Speed range: 30-600 rpm
Max Flow : 6000 ml/min
Max Number of Channel: 2*kz25 4*YZ15
Power supply: AC110V or AC220V
Basic type liquid constant peristaltic pump with Flow reversible
304sss housing prolong pump life time.
Good electromagnetic compatibility, ensure stable and reliable operation
CE certified product based on request.
Chuangrui peristaltic pump tubing using silica gel and platinum molded with vulcanizing agent, odorless, non-toxic, which process complex, translucent appearance, a high degree of cleanliness, good elasticity, autoclavable, widely used in food cosmetic and medical. It is an ideal pump tube for peristaltic pump liquid transmission.
Tube material: Platinum vulcanized silicone.
1. The best way to select a tube is that to decide which materials are chemically suitable at first, and then choose the one which best meets the physical demands of the application.
2. For maximum tube life, use a large bore tube at low speed. For maximum flow rate use the largest tube at maximum speed. For maximum accuracy, use a small bore tube at maximum speed.
3. Suction lift depends on the tube restituting fully before the advance of the next roller. If it does not, the flow rate will be reduced. For maximum suction lift or pressure, use the smallest practicable bore size of tubing and run the pump at the slowest possible speed.
The plastic housing of ZN type of pump head is made of PC (Polycarbonate)materials, so its rigidity and structure are more excellent. Its strong capabilities of baring high temperature and erosion, especially the excellent performance in the aspects of strong chemical resistance such as resisting organic solvent, effectively reducing the damage rate of the pump heads and the customers's cost in maintaining and reparing.
Hose for fuel, lubricating oil
The characteristics of:
For the vast majority of oil and chemical products, not brittle no swelling.
Resistance to ozone and ultraviolet radiation
Suitable for delivery of gasoline , diesel, heating oil, cutting oil and glycol refrigerant compound
CR peristaltic pump LG350M is a liquid constant transfer pump. that can run with KZ50 pump heads, with flow rate from 10-33000 ml/min. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V, and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers.
Glycerin/Oil/watter filling peristaltic dosing pump
Two kinds of operating modes, transferring and dispensing, can be switched freely, to ensure the quantitative distribution of the fluid.
Memory function available in case of power off and it will continue the work once the power was restarted.
Supports MODBUS communication protocol through the DB15 interface of the drive. And communication protocols customized is available.
Norprene A-60-F food processing hose can withstand the high temperatures that occur during food and beverage processing, and is more durable than other food hoses and has better performance. Even if it is exposed to high temperature and ozone, it will not crack or deteriorate like traditional rubber pipes.
Norprene A-60-F food processing hose is very flexible and can withstand bending and maintain its shape during quick and easy installation. Its excellent resistance to bending fatigue makes it the best choice for peristaltic pump tubing often used in batching equipment.
Features:
1. Corrosion resistance: resistant to moderate strength acid&alkali.
2. Ingredients: neoprene.
3. Physical characteristics: yellow opaque, hardness 61, poor ventilation, UV Class A, ozone B grade.
4. Temperature range: -51~135
5. Sterilization method: high temperature and high pressure sterilization (repeated sterilization does not affect life).
6. Standards: FDA, NSF 51, 3A
7. Service life: normal temperature and pressure, 50 rpm, 24 hours continously extruding , about 10,000 hours of life(intermittent use can extend the tube life).
Peristaltic pump tubing Characteristic
Norprene A-60-F tube is available in a variety of sizes. Suitable for various peristaltic pump heads.
1. More durable than other food-grade tube.
2. Excellent abrasion resistance.
3. Excellent bending fatigue resistance.
4. Even if the long-term exposure of high temperature, ozone, UV ultraviolet environment, it will not like the traditional rubber tube that aging cracking.
5. With excellent ozone and UV resistance, in the laboratory simulation of outdoor exposure for 10 years, only a small amount or even no signs of deterioration.
6. Completely free from the effects of various disinfectants and detergents.
7. Compatible with various oxidants, such as hydrogen peroxide, sodium hypochlorite and ozone.
8. Can be repeated high temperature autoclave disinfection, will not affect the quality and life of the tube.
9. Ideal choice of CIP and SIP cleaning, disinfection system.
10. Norprene A-60-F I.B. pressure-resistant tube, 4 times larger than ordinary tube.
Model: WT600/KZ25
Speed range: 30-600 rpm
Max Flow : 6000 ml/min
Max Number of Channel: 2*kz25 4*YZ15
Power supply: AC110V or AC220V
Basic type liquid constant peristaltic pump with Flow reversible
304sss housing prolong pump life time.
Good electromagnetic compatibility, ensure stable and reliable operation
CE certified product based on request.
Peristaltic pump CM1000/YZ1515X Flow range is 0.007~380ml/min/channel. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers. FULL SPEED button available for filling in & emptying out. Good capability price rate. Not suitable when used in the open air.
Peristaltic Liquid Pump with Silicone Tubing. Move fluid safely from here to there with this very nice little pump. Unlike most liquid pumps, this is a peristaltic PUMP type the pump squishes the silicone tubing that contains the liquid instead of impelling it directly. The upshot? The pump never touches the fluid which makes this an excellent choice for any MICRO liquid handling
The UCP300 stepper motor peristaltic pump have superb features built-in and flexible design to meet specific customer needs.
Flexible rotor assembly, occlusion can be adjusted automatically, which give this OEM peristaltic pump powerful functions.
The UCPdesign started from the customer's requirements for small size, multi-function and high precision, and supports PLC
control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
UTF03 is a filling peristaltic pump independently developed by Chuangrui Pump Industry. It consists of an
intelligent filling system and a main controller. The standard drive unit is 4 channels, which can be expanded
up to 32 channels. UTF03 is suitable for industrial pump head, which can handle precise filling of large flow
liquids. Various functions, large screen display, touch screen operation, accurate flow, make filling production
more peace of mind .
UTF02 is a filling peristaltic pump independently developed by Chuangrui Pump Industry. It consists of an
intelligent filling system and a main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which
can be expanded up to 32 channels. UTF02 can be installed with multiple types of pump heads and adapted to
multi-specification tubes, which can fully meet customer application needs and provide more flow selection.
Various functions, large screen display, touch screen operation, accurate flow, make filling production more
peace of mind .
CR intelligent Peristaltic Dosing Pumps BT600LC-S with 4 work mode : transfer /timer /quantitative/timing quantitative
1. This intelligent programmable Peristaltic Tube Pump BT600LC can be installed by YZ1515x, YZ2515x, pump heads.
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of
flow rates.
3. Long life, Touch screen control, easy to operate,
4. 3.5 -inch color LCD display in English and Chinese version
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
Dosing Pump Technical Parameters
Speed Resolution : 0.1 rpm
Display Mode: Touch Screen
Four work Mode : Transport mode, Timer mode, Quantitative mode, Regular Quantitative Mode
Timing Range : 0.1s~9999min
Quantitative Range :0.001ml~9999L
Suction Angle : 10~720(1 stepping)
External Control : Start & stop, Direction, Speed ( 0-5V, 0-10V, 4-20mA, 0~10kHz )
Communication Protocol : RS485
Power Consumption :
ChuangRui Industrial Filling & Transfer Peristaltic Pump BG600FJ-S/YZ35 With Flow range 1.3-12000 ml/min. which can work with 2 tube sizes (73# 82 # ) to meet different flow requests. 2 work modes suitable for various Liquid Transfer & Filling.
Peristaltic Liquid Pump Application 1
Industry : Hard material processing
Model : BG600FJ-S/YZ35
Liquid : Grinding fluid
Function : constant transfer
Tube : Norprene Chemical Peristaltic Pump Tubing 82#
External control : start/stop
Milking Vending Machine OEM Peristaltic Pump product description
Our OEM Small Peristaltic Pump 204 model High quality mini DC Peristaltic Liquid Pump with speed regulator with flow rate up to 1740mL/min, transparent PC plastic shell. It is convenient for observing the work situation of Peristaltic Pump Head. The roller adopts 304 stainless steel, can work long time with high speed.
OEM Peristaltic Dosing Pumps Features:
*304SSS roller
*Transparency Peristaltic Pump Head,can check the liquid work status easily.
*With L bracket and installation screw holes ,easy to install.
*Support bracket customized,that means we can design and produce the suitable bracket to meet your installation requirement .
*The flow with silicon tube 24# can reach 1740 ml/min and the liquid based on water .
Noted: The thick liquid will cause the flow become slow
The OEM Small Peristaltic Pump model OEM208/KZ25 with Compact structure design, simple installation design, and good working performance, widely used in various liquid processing equipment
Customize mounting brackets available. Ideal for fluid transfer applications
The filling packing machine peristaltic pump head YZ1515X is made of two materials.The black filling packing machine peristaltic pump head YZ1515x is made of Polyphenylene sulfide (PPS) has excellent heat resistance, flame retardancy, insulation, high strength and hardness, excellent mechanical properties, good product dimensional stability, can be processed by a variety of molding methods, and can be precise forming. Because PPS has good affinity with inorganic fillers, reinforcing fibers and compatibility with other polymer materials, it can be made into different reinforcing filler materials and polymer alloys.
Typical application : Chemical industry/ packing machine/printing /fine chemical...etc.
The white filling packing machine peristaltic pump head YZ1515X is made of Polysulfone (PSF) resin has good rigidity and toughness, high temperature resistance, heat oxidation resistance, long-term use in the temperature range of -100â??~150â??, excellent creep resistance, and corrosion resistance of inorganic acids, alkalis, and salt solutions. Resistance to ionizing radiation, non-toxic, good insulation and self-extinguishing, easy to form and process.
Typical application : Medical/ Lab/ Analytical Instruments..etc.
YZ series pump heads are designed for easy-to-use peristaltic pump system. With these pump heads, tubing loading becomes very easy and fast. The pump heads can be stackable for multi-channel pumping and adapt easily to OEM applications. PPS housing of Pump head is steady, autoclavable (150), but organic solvent non-resistance. While PPS housing of pump head is organic solvent resistance. The rotor material is stainless steel.
The micro flow multichannel DG peristaltic pump head is a separate card installation and special hose; the pressure tube
gap can be fine-tuned to adapt to different wall thickness hoses. Designed for small flow, multi-channel fluid delivery.
SC600-1 Portable Peristaltic Pump retains its own advantages of Peristaltic Pump, single-tube single-use quick loading, and unloading, no cross-contamination; wide flow processing range, forward and reverse operation is reversible. Replaceable charging
Power supply, light, and portable, flexible operation, can easily handle stratified sampling, deep water sampling, indoor and outdoor sampling of gas samples, high-viscosity liquids, small particle suspension liquids, etc., especially suitable for the field
Environmental operations.
Battery Powered Small Peristaltic Pump is suitable for environmental monitoring stations, water treatment, gas and liquid, layered sampling, collection of medical-grade specimens, and other fields.
IZS60-1A industrial automation high-precision syringe pump is a high-profile OEM product
with compact structure and support for open integration. It is mainly used for customized equipment and instruments.
Controlled by PC software input instructions, it can automatically complete complex and extensive fluid processing (transmission/dilution/distribution/dropping), providing a more stable and efficient solution for the high-precision transmission of trace fluids.
MicroFlow Peristaltic pump
The micro flow peristaltic pump consists of pump head, motor, and tube. It is mainly suitable for use with online monitoring instruments such as COD and CEMS. In addition to the continuation of the basic transmission function of the peristaltic pump, the pump head has stronger practicality. The unique design of elastic rollers, snap-fit installation, rolling positioning wheels, Flexible press tube, etc. makes the liquid flow transmission more stable, The tube life is longer and the loading and unloading is more convenient.
UTF01 is a filling peristaltic pump independently developed by Chuangrui Pump. It consists of an intelligent filling system and the main controller. The standard drive unit is 4 channels (2 3 4 5 6 optional), which can be expanded up to 32 channels. UTF01 can be installed with multiple types of pump heads and adapted to multi-specification tubes, which can fully meet customer application needs and provide more flow selection. Various functions, large screen display, touch screen operation, accurate flow, make filling production more peace of mind. Multiple channels can be opened at the same time for liquid filling, or the filling value of each channel can be set individually for filling. Support customized solutions.
Peristaltic Pump Filling System UTF (Ultra Filling System)could work alone to dispense the liquid material into the bottles or other containers with our filling nozzles and filling stand , and also could be integrated in and controlled by the packing machine for a complete automatic production system. It can be controlled by start-stopï¼?Passive signal ï¼?control,Which can work with your various sensor.It also accept active signal control customized.
The Peristaltic filling machine is expandable from 2 to 32 channels based on the production line exact requirement.
The peristaltic pump filling system is specially designed for multi-channel fast filling of various liquid materials. It supports single-channel membrane button fine-tuning to quickly meet customer calibration needs. At the same time, it supports high-precision calibration in combination with a balance or measuring cup. The pump head can choose 3 rollers, 4 rollers, 6 rollers, etc. to meet the different pulsation requirements of customers, and at the same time, a customized damper can be used with the filling machine to achieve stable and high-precision filling.
The filling pump can be used for foot switch to control semi-automatic manual filling, and can also be integrated into various production lines that require liquid material filling, such as vaccine filling machines, blister machines, cosmetic filling machines, food packaging machines, etc. The unique external signal control of the filling pump can be perfectly combined with the customer's equipment. It is a good helper for various multi-channel, high-precision and high-efficiency liquid filling pumps.
ZG600 CR peristaltic pump using high-power DC motor driven pump head, powerful output power, torque, variable speed multi-turn potentiometer. Desktop structure, flow stability, and torque, low noise, simple operation, can drive double pump head. Drive within the speed range 60 ~ 600rpm/min , greater pressure for industrial fluid transfer applications. Switch on the operator panel control of the pump working state, the encoded knob to adjust the pump speed.
Glycerin/Oil/watter filling peristaltic dosing pump
Two kinds of operating modes, transferring and dispensing, can be switched freely, to ensure the quantitative distribution of the fluid.
Memory function available in case of power off and it will continue the work once the power was restarted.
Supports MODBUS communication protocol through the DB15 interface of the drive. And communication protocols customized is available.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
Stepper motor peristaltic pump
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
ZG600 CR peristaltic pump using high-power DC motor driven pump head, powerful output power, torque, variable speed multi-turn potentiometer. Desktop structure, flow stability, and torque, low noise, simple operation, can drive double pump head. Drive within the speed range 60 ~ 600rpm/min , greater pressure for industrial fluid transfer applications. Switch on the operator panel control of the pump working state, the encoded knob to adjust the pump speed.
The UCP design started from the customer's requirements for small size, multi-function and high precision, and supports PLC control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
The UCPdesign started from the customer's requirements for small size, multi-function and high precision, and supports PLC
control.
Stepping motors and conventional drivers are mostly used for packaging machinery. The speed of the pump can be controlled by pulse
to achieve precise filling. Chuangrui's unique control program can support analog control (0-5v 0-10v 4-20mA 0-10KHz) start-stop
control, direction control. It also supports RS485 communication protocol. The pump can be better embedded and combined with the customer's equipment.
Custom mounting brackets available.
- Ideal for fluid transfer application
- Pump head is compact and simple in design with same side tubing entry/exit.
- Perfect for space-limited applications.
- Pump heads are compact and easy to integrate into your Fluid applications.
- Call for more information on our pump services.
CR peristaltic pump offer the basically customized UCP peristaltic pump solution for the Testing equipment / analytical instruments and other machine or device supporting . with compact and easy install Characteristics and support remote control device. Our UCP series were popular used in various field . CR Customized Peristaltic pump for machine supporting that widely used invending machine/Analytical Instruments/sampling/dispenser/Hydroponics
The small peristaltic pump adopts a 4-rotor roller structure, low pulsation, high precision, and single-channel and dual-channel options, suitable for various analytical instruments, monitoring instruments and other equipment
The pump head is changed to adopt elastic pressure tube, pressure is self-adaptive, and the service life of the hose is improved.
Snap-in tube installation type for , eliminating the trouble of installing pipe clamps or joints, and easily remove the hose
The pump head is changed to adopt elastic pressure tube, pressure is self-adaptive, and the service life of the hose is improved.
Snap-in pressure pipe, eliminating the trouble of installing pipe clamps or joints, and easily remove the hose.
It can work with 4 different size tube which meet flow range 0-53 ml/min
The micro flow peristaltic pump consists of pump head, motor, and tube. It is mainly suitable for use with online monitoring instruments such as COD and CEMS.
In addition to the continuation of the basic transmission function of the peristaltic pump, the pump head has stronger practicality. The unique design of elastic rollers, snap-fit installation, rolling positioning wheels, Flexible press tube, etc. makes the liquid flow transmission more stable, The tube life is longer and the loading and unloading is more convenient.
The YZ35-13 pump head is made of PPS(polyphenylene sulfide ether) materials, so its rigidity and structure are more excellent.
Its strong capabilities of baring high temperature and erosion, especially the excellent performance in the aspects of strongchemical resistance, such as resisting organic solvent, effectively reducing the damage rate of the pump heads and the customers'cost in maintaining and reparing.
IZS60-1A industrial automation high-precision syringe pump is a high-profile OEM product
with compact structure and support for open integration. It is mainly used for customized equipment and instruments.
Controlled by PC software input instructions, it can automatically complete complex and extensive fluid processing (transmission/dilution/distribution/dropping), providing a more stable and efficient solution for the high-precision transmission of trace fluids.
The peristaltic pump is widely used in laboratories where the liquid is to be transferred quickly and accurately. The liquid is transmitted through the peristaltic pump hose and does not touch the pump body, avoiding cross-infection. Laboratory Peristaltic Pumps are widely used for Liquid chromatography analysis /Cell tissue transport/ Sample decolorization /Perfusion /Acid or alkaline solution delivery/Tangential-flow filtration etc.
Model: BT100M/YZ1515x
Speed range: 0.1-100 rpm
Flow range : 0.007-380ml/min
Max Number of Channel: 2
Power supply: AC110V or AC220V
Basic type liquid constant peristaltic pump with Flow reversible
Metal housing with anti-corrosion paint treatment, prolong pump life time.
Good electromagnetic compatibility, ensure stable and reliable operation
CE certified product based on request.
High quality electro spinning multi-needle Laboratory Syringe Pump
ZS100 is an injection pump with high precision and dual channel , it supports for a variety of work mode. The 4.3-inch color LCD tou-ch screen can set parameter quickly.
Many instruction light confirm working condition accurately.This product support for multiple syringe to choose,to meet the needs of different experimental flow quantity, high precision control, and has the hard and soft protection agencies and alarm mechanism.Supporting for injection and extraction four working modes. Built-in RS-485 communication,Supporting the Modbus agreements, wide range power input, adapt to various occasions.
The peristaltic pump is widely used in laboratories where the liquid is to be transferred quickly and accurately. The liquid is transmitted through the peristaltic pump hose and does not touch the pump body, avoiding cross-infection. Laboratory Peristaltic Pumps are widely used for Liquid chromatography analysis /Cell tissue transport/ Sample decolorization /Perfusion /Acid or alkaline solution delivery/Tangential-flow filtration etc.
IZS60-1A industrial automation high-precision syringe pump is a high-profile OEM product
with compact structure and support for open integration. It is mainly used for customized equipment and instruments.
Controlled by PC software input instructions, it can automatically complete complex and extensive fluid processing (transmission/dilution/distribution/dropping), providing a more stable and efficient solution for the high-precision transmission of trace fluids.
ZS100 is an injection syringe pump with high precision and dual channel, it supports for a variety of work mode. The 4.3-inch
color LCD touch screen can set parameter quickly.
Many instruction light confirm working condition accurately.This product support for multiple syringe to choose, to meet the needs of different experimental flow quantity, high precision control, and has the hard and soft protection agencies and alarm mechanism. Supporting for injection and extraction four working modes. Built-in RS-485 communication, supporting the Modbus agreements, wide range power input, adapt to various occasions.
The new upgraded filling needle series of the company is made of 316 stainless steel, which has strong corrosion and rust resistance, is durable and fully hygienic, meets FDA and GMP production requirements, and has a flat mouth design. Available in a variety of sizes for both hose types, the two models offer an efficient solution for the diverse fluid needs of our customers.