Wanxie Power Technolog Co., Ltd Product Range
ABC insulation piercing Connectors
ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
JLC series C type clamps
PG parallel groove clamps
Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
H type clamp
BLMT series torque terminals
Quick connector
Wedge grounding clamp
High voltage cable cleat
Transformer clamps/Equipment clamps
YZ clamps for hot line work
ABC Suspension clamps
Anchor NY-G strain clamp for steel wire
U type Shackle/Ball-eyes/Ball link
Yoke plate/Clevise
Shockproof dampers
Rod Composite tension insulator/Lighting Arrester
Contact
Mike Yang
International Trade Department
Email: Mike@wanxie.cc
Skype: wanxiepower
Web: www.wanxie.cc
Web: https://wanxie.en.alibaba.com
Tel: 0086-577-61661881
Fax:0086-577-62698355
Mobile&Whatsapp: 0086-15158533113
Wanxie Power Technology Co., Ltd
Address: No.128 Jingwu Rd, Economic Development Zone, Yueqing, Zhejiang, China
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6. Wire range: 35-300mm2
1. Puncture strunctre, torque nut to ensure the puncture pressure and it's easy to fix.
2. Pressunized struncture, corrosion protection, and have a long service life.
3. Small contact resisance, and low termperature rise.
4. Different pathway wire connected, widely used.
5. Good insulation performance, 1kv withstand voltage is bigger than 4kv, 10kv withstand voltage is bigger than 18kv.
Be applicabe
Voltage(kv)typemain wirebranch wirenumber of bolts toeque value dimensions(mm) h b l
1kv
Jbc15~25/1.5~101.5~251.5~10113452760
Jbc16~70/4~1516~704~25125525285
Jbc16~70/16~7016~7016~70125525285
Jbc16~95/4~3516~954~35125604585
Jbc25~95/25~9525~9525~95225655685
Jbc50~120/16~5050~12016~50125565485
Jbc50~120/50~12050~12050~120125605485
Jbc50~150/6~3550~1506~35125604585
Jbc50~150/50~15050~15050~150225675895
Jbc95~240/95~24095~24095~240225776795
Jbc120~240/25~120120~24025~120225676395
Jbc120~240/70~120120~24070~120225786095
Jbc120~240/120~240120~240120~240225806495
10kv
Jbc10-010~2510~252309573115
Jbc10-125~5025~502309573115
Jbc10-270~12025~502309578115
Jbc10-370~12070~1202309578115
Jbc10-4150~24070~1202309589115
Jbc10-5150~240150~2402309586115
Jbc10-6150~24025~502309586115
JCD type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. it is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing).
It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection.
JCD-0main wire: 10~25Branch wire: 1.5-16 Pull force:0.8Rated Current: 80
JCD-1 main wire: 35~50 Branch wire: 1.5-16 Pull force:0.8Rated Current: 80
Jcd type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. It is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing).
It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection.
Jcd-0main wire: 10~25branch wire: 1.5-16 pull force:0.8rated current: 80
Jcd-1 main wire: 35~50 branch wire: 1.5-16 pull force:0.8rated current: 80
JCD type meter box clamp is made of special aluminum alloy material, has a strong electrical conductivity. it is used for aluminum conductor, copper conductor and copper to aluminum transitional conductor. The clamp is mainly used in the connection between the bus and the meter box, one end is to be connected with the bus. Through the hinge wedge, it tightens the conductor. C-type structure of the body can always maintain a constant contact with the conductor pressure (total breathing).
It can be used for aluminum to aluminum conductor, aluminum to copper conductor, copper to copper conductor connection.
JCD-WX main wire: 16~240 branch wire: 1.5-16 Pull force: 1.2 Rated Current: 270
â?? Puncture structure, torque nut, to ensure the puncture pressure and it easy to fix â??Pressurized structure, corrosion protection and have a longevity of service â?? Small contact resistance, and connector temperature rise low â??Connect different diamater conductor, extensive application â?? Good insulation, 1KV withstand voltage is bigger than 4KV, 10KVwithstand voltage is bigger than 18KV
JBC-2
Suitable conductor: Cu/Al wire
Main Conductor Range: 35-50(mm2)
Tap Conductor Range: 35-50(mm2)
Bolt: 1
Color: Black
JBC-1
Main wire Range: : 35-70mm2
Tap wire range: 6-35mm2
Color: Black
Bolt: 1
JBC-50-240
Main wire range: 50-240
Branch wire range: 50-240
Bolt: 2
Color: Black
TTD Insulation piercing connectors
Model no. IPC3.1
main wire range: 95-16
Branch wire range: 25-10
Bolt: 1
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6.Suitable wire range: 50-70mm2
7. Suitable wire diameter: 8.3-10mm
1.Abc insulation piercing connectors
2.Abc strain clamp/ abc tension clamp/gun type dead end clamps
3.Jlc series c type clamps
4.Pg parallel groove clamps
5.Cable copper lug/aluminium terminal lug/ bi-metallic lugs
6.H type clamp
7.Blmt series torque terminals
8.Quick connector
9.Wedge grounding clamp
10.High voltage cable cleat
11.Transformer clamps/equipment clamps
12.Yz clamps for hot line work
13.Abc suspension clamps
14.Anchor ny-g strain clamp for steel wire
15.U type shackle/ball-eyes/ball link
16.Yoke plate/clevise
17.Shockproof dampers
18.Rod composite tension insulator/lighting arrester
1.ABC insulation piercing Connectors
2.ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3.JLC series C type clamps
4.PG parallel groove clamps
5.Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
6.H type clamp
7.BLMT series torque terminals
8.Quick connector
9.Wedge grounding clamp
10.High voltage cable cleat
11.Transformer clamps/Equipment clamps
12.YZ clamps for hot line work
13.ABC Suspension clamps
14.Anchor NY-G strain clamp for steel wire
15.U type Shackle/Ball-eyes/Ball link
16.Yoke plate/Clevise
17.Shockproof dampers
18.Rod Composite tension insulator/Lighting Arrester
XJG series is suitable for areial electric wire suspension insulation conductor, which has hook type and hinge type for the users.
Model No.: XJG-16~95
Suitable conductor: 416~95
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : â?¥18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
6. Wire Range: 25-400 mm2
7. Wire conductor diameter: 8.4-27.2mm
8. Faliure load: 10.35-43.4KN
1. Wedge type wire clip is made up of C type wedge shell and wedge block( as picture show). The size of groove between C type wedge shell and wedge block is directly related to the diameter of conducting wire to be installed. The size and shape of wedge is deci-ded by the designer and manufacturer. Thererfore in choosing wedge type wire clip, the user may only offer the type and cross slectional size of maine traverse and spur traverse. See table 1 and table 2 for choic of wedge type wire clip.
2. Main Wire range: 185-240 sqmm
3. Branch wire range:35-240 sqmm
Wedge type wire clip is made up of C type wedge shell and wedge block( as picture show). The size of groove between C type wedge shell and wedge block is directly related to the diameter of conducting wire to be installed. The size and shape of wedge is deci-ded by the designer and manufacturer. Thererfore in choosing wedge type wire clip, the user may only offer the type and cross slectional size of maine traverse and spur traverse.
Wedge type wire clip is made up of C type wedge shell and wedge block( as picture show). The size of groove between C type wedge shell and wedge block is directly related to the diameter of conducting wire to be installed. The size and shape of wedge is deci-ded by the designer and manufacturer. Thererfore in choosing wedge type wire clip, the user may only offer the type and cross slectional size of maine traverse and spur traverse. See table 1 and table 2 for choic of wedge type wire clip.
Wedge type wire clip is made up of C type wedge shell and wedge block( as picture show). The size of groove between C type wedge shell and wedge block is directly related to the diameter of conducting wire to be installed. The size and shape of wedge is deci-ded by the designer and manufacturer. Thererfore in choosing wedge type wire clip, the user may only offer the type and cross slectional size of maine traverse and spur traverse. See table 1 and table 2 for choic of wedge type wire clip.
Type Suitable Conductor Dia(mm)Description
NXJ4-1A,1C 46~50 Trolley type,aluminum alloy body
NXJ4-2A,2C 470~120
NXJ4-1B 425~50 Pull plate,the body is weather-resistant
NXJ4-2B 470~120 engineering plastics
NXJ4-3B 450~185
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : â?¥18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
6. Wire range size: 25-240mm2
7. Conductor outer diameter: 8.4-27.2mm
8. Faliure load:10.5-43.4 KN
1. ABC insulation piercing Connectors
2. ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3. JLC series C type clamps
4. PG parallel groove clamps
5. Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
6. H type clamp
7. BLMT series torque terminals
8. Quick connector
9. Wedge grounding clamp
10. High voltage cable cleat
11. Transformer clamps/Equipment clamps
12. YZ clamps for hot line work
13. ABC Suspension clamps
14. Anchor NY-G strain clamp for steel wire
15. U type Shackle/Ball-eyes/Ball link
16. Yoke plate/Clevise
17. Shockproof dampers
18. Rod Composite tension insulator/Lighting Arrester
1. ABC insulation piercing Connectors
2. ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3. JLC series C type clamps
4. PG parallel groove clamps
5. Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
6. H type clamp
7. BLMT series torque terminals
8. Quick connector
9. Wedge grounding clamp
10. High voltage cable cleat
11. Transformer clamps/Equipment clamps
12. YZ clamps for hot line work
13. ABC Suspension clamps
14. Anchor NY-G strain clamp for steel wire
15. U type Shackle/Ball-eyes/Ball link
16. Yoke plate/Clevise
17. Shockproof dampers
18. Rod Composite tension insulator/Lighting Arrester
1. ABC insulation piercing Connectors
2. ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3. JLC series C type clamps
4. JXL wedge-type clamp
5. PG parallel groove clamps
6. Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
7. H type clamp
8. BLMT series torque terminals
9. Quick connector
10. Wedge grounding clamp
11. High voltage cable cleat
12. Transformer clamps/Equipment clamps
13. YZ clamps for hot line work
14. ABC Suspension clamps
15. Anchor NY-G strain clamp for steel wire
16. U type Shackle/Ball-eyes/Ball link
17. Yoke plate/Clevise
18. Shockproof dampers
19. Rod Composite tension insulator/Lighting Arrester
1. ABC insulation piercing Connectors
2. ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3. JLC series C type clamps
4. JXL/JXD wedge-type clamp
5. PG parallel groove clamps
6. Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
7. H type clamp
8. BLMT series torque terminals
9. Quick connector
10. Wedge grounding clamp
11. High voltage cable cleat
12. Transformer clamps/Equipment clamps
13. YZ clamps for hot line work
14. ABC Suspension clamps
15. Anchor NY-G strain clamp for steel wire
16. U type Shackle/Ball-eyes/Ball link
17. Yoke plate/Clevise
18. Shockproof dampers
19. Rod Composite tension insulator/Lighting Arrester
1. ABC insulation piercing Connectors
2. ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3. JLC series C type clamps
4. JXL/JXD wedge-type clamp
5. PG parallel groove clamps
6. Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
7. H type clamp
8. BLMT series torque terminals
9. Quick connector
10. Wedge grounding clamp
11. High voltage cable cleat
12. Transformer clamps/Equipment clamps
13. YZ clamps for hot line work
14. ABC Suspension clamps
15. Anchor NY-G strain clamp for steel wire
16. U type Shackle/Ball-eyes/Ball link
17. Yoke plate/Clevise
18. Shockproof dampers
19. Rod Composite tension insulator/Lighting Arrester
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire.
The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot.
This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor.
The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications.
Characteristics: Wide range of applications;
Compact design;
Can be used with almost all types of conductors and materials;
Fixed torque and double shear head bolt ensure good electrical contact performance;
Can be easily installed by using standard socket wrenches;
Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV.
Installation description: No need specialized tools to install;
Only need a socket wrench to complete the installation;
Including the provision of inserts;
Double shear head bolt design with gradable torque to ensure reliable and firm contact;
We recommend the use of a support tool to prevent the conductor from bending;
Each connector or cable lug has a separate mounting command.
Model No.: BLMT-25/95-13 Cross section range: 25-95 Bolt: M13
Description: blmt shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, acsr and copper wire.
The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot.
This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor.
The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications.
Characteristics: wide range of applications;
Compact design;
Can be used with almost all types of conductors and materials;
Fixed torque and double shear head bolt ensure good electrical contact performance;
Can be easily installed by using standard socket wrenches;
Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kv.
Installation description: no need specialized tools to install;
Only need a socket wrench to complete the installation;
Including the provision of inserts;
Double shear head bolt design with gradable torque to ensure reliable and firm contact;
We recommend the use of a support tool to prevent the conductor from bending;
Each connector or cable lug has a separate mounting command.
Description: BLMT shear bolted lugl is connection type power fitting between the wire and equipment, mainly used for non-bearing connection in insulated wire, aluminum wire, ACSR and copper wire.
The terminal body is made of a high strength tinned aluminum alloy, and the inner surface of the conductor hole has a mesh concave design. Double shear head bolts are made of special aluminum alloy and are treated with high quality lubricants and are equipped with a special contact ring which can not be removed once the bolt head is cut off. Insert or remove the special insert to adjust the scope of the applicable conductor. These inserts have longitudinal stripes and a positioning slot.
This product model is streamlined, suitable for different diameter connection. For example: three models can cover from 25mm2 to 240mm2 conductor.
The terminals are suitable for outdoor and indoor applications and can provide different bolt size specifications.
Characteristics: Wide range of applications;
Compact design;
Can be used with almost all types of conductors and materials;
Fixed torque and double shear head bolt ensure good electrical contact performance;
Can be easily installed by using standard socket wrenches;
Using a leading industrial design, enable the perfect installation on mdedim voltage cable of up to 42kV.
Installation description: No need specialized tools to install;
Only need a socket wrench to complete the installation;
Including the provision of inserts;
Double shear head bolt design with gradable torque to ensure reliable and firm contact;
We recommend the use of a support tool to prevent the conductor from bending;
Each connector or cable lug has a separate mounting command.
BLMT-185/400-17
Cross section range: 185-400
Diameter of mounting hole: 17
Bolt: M22
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.
JXD-1
Main wire: 35-50
Branch wire: 35-50
JXLD series wedge clamp grounding clamp and insulation cover Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.
Main wire range: 35-95mm2
Branch wire range: 35-95mm2
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.
JXL-2
Main wire range: 120-150
Branch wire range: 120-150
Application: Wedge clamps are for non-bearing connection or branching between aluminum stranded conductor, copper conudctor or steel core aluminum conductor in arieal insulation lines. The clamp works with insulation cover to offer insulation proetection. Installation Notes: The wedge clamp consists of a C-shaped wedge shell and a wedge, as shown in the figure, and the groove size between the C-type wedge and the wedge is directly related to the diameter of the conductor to be mounted. The groove size and shape are determined by the designer and the manufacturer. Therefore, to choose suitable wedge clamp, the user only need to provide conductort type and sizes of the main line and the branch line.
JXD-8 wedge clamp
Main wire range: 185-240
Branch wire range: 70-95
Model No.: IPC3.2
Main conductor Range: 95-70mm2
Tap Conductor Range: 95-70mm2
Bolt no.: 1
Color: Black
Model no: IPC3.3 piercing connectors
Main conductor range: 185-210mm2
Tap Conducotor range: 25-16mm2
Bolt: 1
Color: Yellow
Conductor Range(mm2)
Model No. Main Tap Bolt No.
TTD121F95-2525-2.5 1
TTD151F95-2535-2.5(6) 1
TTD201F95-3595-25 1
TTD281F185-5012936 1
TTD282F95-252Ã?(35-2.5) 1
TTD451F240-95 240-95 1
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6. Main wire and branch size range:35-300mm2
Jbc series tap connector piercing connectors featuer
1. Puncture strunctre, torque nut to ensure the puncture pressure and it's easy to fix.
2. Pressunized struncture, corrosion protection, and have a long service life.
3. Small contact resisance, and low termperature rise.
4. Different pathway wire connected, widely used.
5. Good insulation performance, 1kv withstand voltage is bigger than 4kv, 10kv withstand voltage is bigger than 18kv.
Be applicabe
Voltage(kv)typemain wirebranch wire number of bolts toeque value dimensions(mm) hbl
1kv
Jbc15~25/1.5~101.5~251.5~10113452760
Jbc16~70/4~1516~704~25125525285
Jbc16~70/16~7016~7016~70125525285
Jbc16~95/4~3516~954~35125604585
Jbc25~95/25~9525~9525~95225655685
Jbc50~120/16~5050~12016~50125565485
Jbc50~120/50~12050~12050~120125605485
Jbc50~150/6~3550~1506~35125604585
Jbc50~150/50~15050~15050~150225675895
Jbc95~240/95~24095~24095~240225776795
Jbc120~240/25~120120~24025~120225676395
Jbc120~240/70~120120~24070~120225786095
Jbc120~240/120~240120~240120~240225806495
10kv
Jbc10-010~2510~252309573115
Jbc10-125~5025~502309573115
Jbc10-270~12025~502309578115
Jbc10-370~12070~1202309578115
Jbc10-4150~24070~1202309589115
Jbc10-5150~240150~2402309586115
Jbc10-6150~24025~502309586115
1. Puncture strunctre, torque nut to ensure the puncture pressure and it's easy to fix.
2. Pressunized struncture, corrosion protection, and have a long service life.
3. Small contact resisance, and low termperature rise.
4. Different pathway wire connected, widely used.
5. Good insulation performance, 1kv withstand voltage is bigger than 4kv, 10kv withstand voltage is bigger than 18kv.
Specs:
Be applicabe
Voltage(kv) typemain wirebranch wire number of boltstoeque valuedimensions(mm) hbl
1kv
Jbc15~25/1.5~10 1.5~251.5~10 113452760
Jbc16~70/4~15 16~70 4~25125525285
Jbc16~70/16~70 16~70 16~70125525285
Jbc16~95/4~3516~95 4~35 125604585
Jbc25~95/25~95 25~95 25~95 125655685
Jbc50~120/16~50 50~120 16~50125565485
Jbc50~120/50~12050~12050~120125605485
Jbc50~150/6~3550~1506~35125604585
Jbc50~150/50~15050~15050~150225675895
Jbc95~240/95~24095~24095~240225776795
Jbc120~240/25~120120~24025~120225676395
Jbc120~240/70~120120~24070~120225786095
Jbc120~240/120~240120~240120~240225806495
10kvjbc10-010~2510~252309573115
Jbc10-125~5025~502309573115
Jbc10-270~12025~502309578115
Jbc10-370~12070~1202309578115
Jbc10-4150~24070~1202309589115
Jbc10-5150~240150~2402309586115
Jbc10-6150~24025~502309586115
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6. Suitable wire: 35-70sqmm
7. Suitable wire diameter: 7-10mm
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6. Suitable wire range:70-95mm2
7. Suitable wire diameter: 9.6-11.4mm
1.ABC insulation piercing Connectors
2.ABC strain clamp/ ABC Tension Clamp/Gun type Dead end clamps
3.JLC series C type clamps
4.PG parallel groove clamps
5.Cable Copper lug/Aluminium terminal lug/ Bi-Metallic Lugs
6.H type clamp
7.BLMT series torque terminals
8.Quick connector
9.Wedge grounding clamp
10.High voltage cable cleat
11.Transformer clamps/Equipment clamps
12.YZ clamps for hot line work
13.ABC Suspension clamps
14.Anchor NY-G strain clamp for steel wire
15.U type Shackle/Ball-eyes/Ball link
16.Yoke plate/Clevise
17.Shockproof dampers
18.Rod Composite tension insulator/Lighting Arrester
Application
LH series specific forms parallel groove clamp is suitable for unendure force splicing and branch on the aerial wire, being used with insulation cover, it action is insulation protection.
Performance feature
Resistance is small, enenrgy saving, safe and reliable operation. Using special tools for installation, ensure the installation quality. A variety of materials, wire connected freely.
Catalog No. AÂ core hitch BÂ core hitch
outside diameter(mm) Dia(mm2)outside diameter(mm) Dia(mm2)
LH11 4.8-8.2 16-35 4.8-8.2 16-35
LH21 8.3-14.0 50-95 4.8-9.6 16-50
LH22 10.0-14.0 50-95 10.0-14.0 50-95
LH31 13.0-22.4 95-240 4.8-11.4 16-70
LH32 13.0-22.4 95-240 11.6-16.0 70-150
LH41 16.2-22.4 150-240 16.2-22.4 150-240
LH51 22.4-25.9 300-400 10.0-14.5 70-120
LH52 22.4-25.9 300-400 14.6-18.0 120-185
LH53 22.4-25.9 300-400 18.9-22.4 185-240
LH54 22.4-25.9 300-400 22.4-25.9 300-400
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : 18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
6. Wire range: 50-120mm2
7. Fealiure load: 35.7KV
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : â?¥18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
6. Wire range: 120-240mm2
7. Failure load:43.4KV
Application
NXJ Series is suitable for strain clamp insulation string of 10kV aerial insulation aluminium core wire JKLYJ terminal or two ends fixing and tighten aerial insulation.
Structure feature
1,The shell made of anti-oxidate high strength aluminum alloy.
2,The core of wedge made of insulating reinforce plastics, withstand voltage : â?¥18kV not breakdown one min.
3,Not remove the insulation layer,AI-core wire are current use.
4,Without waste power
5,Wedge structure
6. Wire range: 185-240mm/
7. Failure Load: 36.4
1. Big contact surface
2. High overload capacity
3. High strength material, stainless steel bolt fastening
4. Easy to install and remove
5. Energy saving
6. Suitable wire:jkly-70(10.0), diameter:10mm
Type suitable conductor dia(mm) description
Nxj4-1a, 1c416~50 trolley type, aluminum alloy body
Nxj4-2a, 2c470~120
Nxj4-1b 425~50 pull plate, the body is weather-resistant
Nxj4-2b470~120 engineering plastics
Nxj4-3b4150~185
