Ipc3.1 Ttd Insulation Piercing Connectors

Conductor Range(mm2) Model No. Main Tap Bolt No. TTD121F95-2525-2.5 1 TTD151F95-2535-2.5(6) 1 TTD201F95-3595-25 1 TTD281F185-5012936 1 TTD282F95-252Ã?(35-2.5) 1 TTD451F240-95 240-95 1

JBC-1 Main wire Range: : 35-70mm2 Tap wire range: 6-35mm2 Color: Black Bolt: 1

Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed. Naixiang also has a wide range of production capabilities to include but not limited to, hot forming, cold forming, injection molding, casting, hot forge, cold forge, stamping, and many more. We are also able to offer secondary machining and assembly as needed

Da 2-95 Main line; 16-95sqmm Branch line: 4-35/50sqmm. mainline:insulated Cu or Al tap:insulated Cu or Al 1.Using corrosion-resistant shell, Anti-climate change, high-intensity ultraviolet insulation materials 2.Constant puncture fastening torque nut is installed more simple, safe, fast. 3.Extension puncture site and contact with senior waterproof cover functions (IP27), the water pressure of 6 KV 4.Extension Cover may as required under extreme left or right side. 5pcs/box 20box/carton.

This type insulation piercing connectors are suitable for all types of LV-ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided. Suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. insulation piercing connector

Customized Insulation Piercing Connector Customized Flameproof Insulated Piercing Connector Insulation Piercing Connector for Insulated Overhead Lines 1kV Insulation piercing grounding connectors (CONWELL type) selection table Type (mm2) Main Line Section (mm2) Branch Section Bolt Quantity (pcs) KWLW-1 5-120 35-70 1 KWLW-2 35-70 16-35 1 KWLB-1 16-95 16-95 1 KWLB-2 1 KWDM-1 16-120 4-35 1 KW4-150-2P 16-150 16-150 2 KW2-95B 16-95 4-50 2 KW4-150A 16-150 16-150 2 lation piercing connector(IPC) 1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. Performance testing 1. Mechanical performance: the grip force of the wire clamp is 1/10 bigger than the break force of the lead, It comply with GB2314-1997. 2. Temperature rise performance: under the condition of big current, the temperature rise of connector is less than that of connection lead. 3. Heat circle performance: conforms to GB/T2317.3-2000, the heat circle trial standard for electric fitting. 4. Waterproof insulation performance: conforms to the relevant testing requirements in Part 2 of GB/T13140.4-1998. 5. Resistance to corrosion performance: under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing. 6. Environmental aging performance: under the circumstance of ultraviolet, radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks. 7. Fire-proof performance: insulation material of the connector withstands glowing filament test. Conform to the requirements in Chapter 4-10 of GB/T5169.4. -

1. Piercing connector, simple installation, need not strip the cable coat. 2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. 3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. 4. Adopted special connecting tablet, apply to joint of Cu(Al) and Cu(Al) or Cu and Al. 5. Small electric connecting resistance, connecting resistance less than 2.5 times of the resistance of branch conductor with the same length.in accordance with the standard DL/T765.1-2001. 6. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 12kV. 7. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (0.75mm2-400mm2/td) Sali main products: Ball Eye, Tension Clamp, Socket Clevis Eye, Anchor Clamp, Crossarm, Insulator, Pole Line Hardware, Insulator Pin, Clevis etc. -

Supplier: Sugar, urea and rock phosphate, ductile iron pipes and fittings, carbon steel pipes and fittings, surge arresters and composite insulators (11 223 kv), heavy machinery attachments for excavators and skid loaders, fuel oil, pet coke and iron pellets, aerosol fire suppression devices, rare earth minerals and products, copper ore
Services: Consultancy services, business set up, facilitating, brokerage, contracting for electromechanical work in abu dhabi
Buyer: Carbon steel pipes and fittings

Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN