Product Application
With the gripper continuous feeding and complete cutting, stamping, waste scrap removing at one time in one position, our machine can finish the procedure of punching in a very shot time.
Q: -compare with other machine, what's your davantage
A: -our machine can improve your production efficiency 4-5 times.
Q:-that's impossible, are you kidding me
A:of course not. Let me tell you how it operate.
Gripper do continuously pulling for long or rolled EPE, then stamping , cutting and squeezed out the waste scrap from the cavity of the die sequentially, all these step are complete at one time in one position.
1, control by microcomputer, which can guarantee the same cutting depth of each cutting position.
2, cutting, stamping and removing waste sarap at one time, production efficiency can be improved 4-5 times.
3, continues feeding by gripper, our machine can be controled by one labor.
4,easy to operate, workers can learn quickly.
Product Application
It is mainly used in cutting EPE big sheet into small sheet, replacing the tradtional vertical cutting machine.
1, with PLC servo motor control, slitting precision is extremely high.
2, full automatically, workers can learn quickly and operate easily, saving labor cost for you.
3, waste scrap length is about 10mm, compare with similar machine, we can save your product cost about 50 to 350 USD dollar per day.
4,With electromagnetic clutch control for both upper and lower cutting knife, being more faster.
Product application
It is mainly used in cutting epe big sheet into small sheet, replacing the tradtional vertical cutting machine.
1, with plc servo motor control, slitting precision is extremely high.
2, full automatically, workers can learn quickly and operate easily, saving labor cost for you.
3, waste scrap length is about 10mm, compare with similar machine, we can save your product cost about 50 to 350 usd dollar per day.
4, with electromagnetic clutch control for both upper and lower cutting knife, being more faster.
Product Application
It is mainly used for cutting and trimming after EPE deep-process.
Use the feeding platform to place the product to be cut or trimmed, when the equipment automatically sends the EPE in place, the heating knife automatically cut down, the moving spindle puts the cut product on the delivery line.
Advantage:
1,Easy-handle, low failure rate, fast cutting
2,Furnished with autofeeder,2-3 times production efficiency can be improved.
3,Keywords touch panel PLC system makes the function and performance of the machine more perfect and more humane.
4,Centralized lubricating system guarantees the precision of the machine and makes the Machine durable.
Product Application
It is mainly used in bonding EPE by ironing, instead of traditional bonding machine bond by hot air gun and hot sol.
The working Principle is very easy, upper EPE will be iron by our high temperature heating plate, and 1~3 mm EPE foam will be removed by ironing, then laminated together with the lower EPE quickly.
Advantage:
1, signal working station, high work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3,do not need hot melt glue, saving glue cost.
4,easy to operate, worker can learn qucikly.
Main Features
The production speed can be adjusted freely. Smoot hand flexible mechanical operation ,series control cutter to be heated without any heat conduction medium. The energy loss is greatly reduced, energy loss is greatly reduced, energy saving, with smooth cutting edge, no scorch mark.
1, The machine adopts our unique code way of innovation, can according to the product thickness, free to adjust code blade height, and about cutting tool installation can quickly adjust freely, make the knife model installation and debugging other brand slot machine more convenient than the market.
2, The machine fixture with material limit, can process according to the material shape size, material limit width adjustment, more convenient location.
3, This machine with function of eliminate waste, reduce artificial remove waste, steps, greatly improve the production efficiency.
4, Knife model temperature can be controlled, heating speed, few seconds can reach required temperature, to ensure the efficient production efficiency.
Product Application
It is mainly used in bonding irregular EPE by ironing, widely used in air conditioner packing, computer packing and making EPE box .
The working Principle is very easy, EPE foam surface will be iron by our low temperature heating plate, and 1~3 mm EPE foam will be removed by ironing, then bonded together with another EPE quickly.
Advantage:
1, with vertical and horizontal movement of heating plate, product can be completed easily.
2, machine can be operated independently by one person, saving labor and production cost.
3,do not need hot melt glue, saving glue cost.
4,easy to operate, worker can learn qucikly.
5, low temperature heating plate(about 200 degree celsius ), smokless and environment friendly.
Product Application
To cut the EPE sheet into squares according to the desired size.
After the cutter is heated to a certain temperature with the electric welding machine, the cylinder drives the cutter to move up and down to finish the epe cutting. The cutter position can be adjusted freely.
Advantage:
1,Easy-handle, low failure rate, fast cutting
2,can be operated by one labor, saving labor cost.
3,easy to learn, worker can maintain quickly.
4, sales from factory directly, price is competitive.
Product application
With the gripper continuous feeding and complete cutting, stamping, waste scrap removing at one time in one position, our machine can offer you very high efficiency and top quality product
Gripper do continuously pulling for long or rolled epe, then stamping , cutting and squeezed out the waste scrap from the cavity of the die sequentially, all these step are complete at one time in one position.
1, control by microcomputer, which can guarantee the same cutting depth of each cutting position.
2, cutting, stamping and removing waste sarap at one time, production efficiency can be improved 4-5 times.
3, continues feeding by gripper, our machine can be controled by one labor.
4, easy to operate, workers can learn quickly.
Product application
It is mainly used in bonding epe by ironing, instead of traditional bonding machine bond by hot air gun and hot sol.
Q: bonding epe without glueare you kidding methat is impossible.
A: -no, that is possible, let me tell you how it works.
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Advantage:
1, signal working station, high work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3, do not need hot melt glue, saving glue cost.
4, easy to operate, worker can learn qucikly.
Main features
1)the heating plate is away from the operator which will be safty and comfortable.
2) through the microcomputer control heating plate, maintain temperature is unified, make product quality consistent.
3) the epe auto electric bonding machine is easy use, simple operate, every specification can be adjusted.
Product application
To cut the epe sheet into squares according to the desired size.
After the cutter is heated to a certain temperature with the electric welding machine, the cylinder drives the cutter to move up and down to finish the epe cutting. The cutter position can be adjusted freely.
Advantage:
1, easy-handle, low failure rate, fast cutting
2, can be operated by one labor, saving labor cost.
3, easy to learn, worker can maintain quickly.
4, sales from factory directly, price is competitive.
Product Application
With the gripper continuous feeding and complete cutting, stamping, waste scrap removing at one time in one position, our machine can offer you very high efficiency and top quality product
Gripper do continuously pulling for long or rolled EPE, then stamping , cutting and squeezed out the waste scrap from the cavity of the die sequentially, all these step are complete at one time in one position.
1, control by microcomputer, which can guarantee the same cutting depth of each cutting position.
2, cutting, stamping and removing waste sarap at one time, production efficiency can be improved 4-5 times.
3, continues feeding by gripper, our machine can be controled by one labor.
4,easy to operate, workers can learn quickly.
Main features
The production speed can be adjusted freely. Smoot hand flexible mechanical operation , series control cutter to be heated without any heat conduction medium. The energy loss is greatly reduced, energy loss is greatly reduced, energy saving, with smooth cutting edge, no scorch mark.
1, the machine adopts our unique code way of innovation, can according to the product thickness, free to adjust code blade height, and about cutting tool installation can quickly adjust freely, make the knife model installation and debugging other brand slot machine more convenient than the market.
2, the machine fixture with material limit, can process according to the material shape size, material limit width adjustment, more convenient location.
3, this machine with function of eliminate waste, reduce artificial remove waste, steps, greatly improve the production efficiency.
4, knife model temperature can be controlled, heating speed, few seconds can reach required temperature, to ensure the efficient production efficiency.
For the rectangulare EPE laminating, also known as the protective angle laminating, the whole procedure no need for glue, all by ironing
By using the principle of electric hot air gun, two strips of sheet EPE are put into the machine transmission place to be glued together at the same time. the EPE is automatically heated by hot air when feeding, so as to be plasticization forming.
High speed laminating, it is equivalent to the efficiency of 5-8 operators. Laminating does not deed to glue the sol, EPE does not become yellow, the laminating is neat, not misplaced.
Product Application
It is mainly used in bonding EPE bracket or frame by ironing, without glue
The working Principle is very easy, upper EPE will be iron by our high temperature heating plate, and 1~3 mm EPE foam will be removed by ironing, then laminated together with the lower EPE quickly.
Advantage:
1, each working station operated independently by one person, saving labor and production cost.
2,do not need hot melt glue, saving glue cost.
3,easy to operate, worker can learn qucikly.
4,different products only need to replace with different fixture, convenient operation, accurate location.
It is mainly used in bonding upper and lower epe foam by ironing, instead of traditional bonding machine bond by hot glue and hot sol.
The working Principle is very easy, upper EPE will be iron by our high temperature heating plate, and 1~3 mm EPE foam will be removed by ironing, then laminated together with the lower EPE quickly.
Advantage:
1, double working station, improve work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3,do not need hot melt glue, saving glue cost.
Product application
It is mainly used in bonding irregular epe by ironing, widely used in air conditioner packing, computer packing and making epe box .
The working principle is very easy, epe foam surface will be iron by our low temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then bonded together with another epe quickly.
Advantage:
1, with vertical and horizontal movement of heating plate, product can be completed easily.
2, machine can be operated independently by one person, saving labor and production cost.
3, do not need hot melt glue, saving glue cost.
4, easy to operate, worker can learn qucikly.
5, low temperature heating plate(about 200 degree celsius ), smokless and environment friendly.
Product application
It is mainly used in bonding epe bracket or frame by ironing, without glue
Q: bonding epe without glue, are you kidding me, that is impossible.
A: -no, that is possible, let me tell you how it works.
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Advantage:
1, each working station operated independently by one person, saving labor and production cost.
2, do not need hot melt glue, saving glue cost.
3, easy to operate, worker can learn qucikly.
4, different products only need to replace with different fixture, convenient operation, accurate location.
It is mainly used in cutting EPE big sheet into small sheet, replacing the tradtional vertical cutting machine.
Q: -compare with traditional machine, what's your davantage
A: -easy to learn, easy to control, saving labor and product cost, PLC servo control, high slitting precision
1, with PLC servo motor control, slitting precision is extremely high.
2, full automatically, workers can learn quickly and operate easily, saving labor cost for you.
3, waste scrap length is about 10mm, compare with similar machine, we can save your product cost about 50 to 350 USD dollar per day.
It is mainly used in cutting EPE big sheet into small sheet, replacing the tradtional vertical cutting machine.
Q: -compare with traditional machine, what's your davantage
A: -easy to learn, easy to control, saving labor and product cost, PLC servo control, high slitting precision
1, with PLC servo motor control, slitting precision is extremely high.
2, full automatically, workers can learn quickly and operate easily, saving labor cost for you.
3, waste scrap length is about 10mm, compare with similar machine, we can save your product cost about 50 to 350 USD dollar per day.
4,With electromagnetic clutch control for both upper and lower cutting knife, being more faster.
We are now looking for final user as well as global agent, looking forwarder to you joining
Product application
For the rectangulare epe laminating, also known as the protective angle laminating, the whole procedure no need for glue, all by ironing
By using the principle of electric hot air gun, two strips of sheet epe are put into the machine transmission place to be glued together at the same time. The epe is automatically heated by hot air when feeding, so as to be plasticization forming.
Still confuse let's see our vedio at top.
High speed laminating, it is equivalent to the efficiency of 5-8 operators. Laminating does not deed to glue the sol, epe does not become yellow, the laminating is neat, not misplaced.
Product application
For the rectangulare epe laminating, also known as the protective angle laminating, the whole procedure no need for glue, all by ironing
By using the principle of electric hot air gun, two strips of sheet epe are put into the machine transmission place to be glued together at the same time. The epe is automatically heated by hot air when feeding, so as to be plasticization forming.
Still confuse? let's see our vedio at top.
High speed laminating, it is equivalent to the efficiency of 5-8 operators. Laminating does not deed to glue the sol, epe does not become yellow, the laminating is neat, not misplaced.
Product application
It is mainly used in bonding epe by ironing, instead of traditional bonding machine bond by hot glue and hot sol.
Q: bonding epe without glue? are you kidding me? that is impossible.
A: -no, that is possible, let me tell you how it works.
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Still confused about it? let's see vedio of top.
Advantage:
1, double working station, improve work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3, do not need hot melt glue, saving glue cost.
4, easy to operate, worker can learn qucikly.
Main features
1)the heating plate is away from the operator which will be safty and comfortable.
2) through the microcomputer control heating plate, maintain temperature is unified, make product quality consistent.
3) the epe auto electric bonding machine is easy use, simple operate, every specification can be adjusted.
Product application
It is mainly used in bonding epe by ironing, instead of traditional bonding machine bond by hot glue and hot sol.
Q: bonding epe without glueare you kidding methat is impossible.
A: -no, that is possible, let me tell you how it works.
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Still confused about itlet's see vedio of top.
Advantage:
1, double working station, improve work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3, do not need hot melt glue, saving glue cost.
4, easy to operate, worker can learn qucikly.
Main features
1)the heating plate is away from the operator which will be safty and comfortable.
2) through the microcomputer control heating plate, maintain temperature is unified, make product quality consistent.
3) the epe auto electric bonding machine is easy use, simple operate, every specification can be adjusted.
Product application
It is mainly used in bonding epe by ironing, instead of traditional bonding machine bond by hot glue and hot sol.
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Advantage:
1, double working station, improve work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3, do not need hot melt glue, saving glue cost.
4, easy to operate, worker can learn qucikly.
Product application
The cutter in the machine can shape the epe foam sheet to many shapes, by digging out the epe part from the sheet block.
The production speed can be adjusted freely. Smoot hand flexible mechanical operation , series control cutter to be heated without any heat conduction medium. The energy loss is greatly reduced, energy loss is greatly reduced, energy saving, with smooth cutting edge, no scorch mark.
Main features
The production speed can be adjusted freely. Smoot hand flexible mechanical operation , series control cutter to be heated without any heat conduction medium. The energy loss is greatly reduced, energy loss is greatly reduced, energy saving, with smooth cutting edge, no scorch mark.
1, the machine adopts our unique code way of innovation, can according to the product thickness, free to adjust code blade height, and about cutting tool installation can quickly adjust freely, make the knife model installation and debugging other brand slot machine more convenient than the market.
2, the machine fixture with material limit, can process according to the material shape size, material limit width adjustment, more convenient location.
3, this machine with function of eliminate waste, reduce artificial remove waste, steps, greatly improve the production efficiency.
4, knife model temperature can be controlled, heating speed, few seconds can reach required temperature, to ensure the efficient production efficiency.
Product application
It is mainly used in bonding epe bracket or frame by ironing, without glue
The working principle is very easy, upper epe will be iron by our high temperature heating plate, and 1~3 mm epe foam will be removed by ironing, then laminated together with the lower epe quickly.
Advantage:
1, each working station operated independently by one person, saving labor and production cost.
2, do not need hot melt glue, saving glue cost.
3, easy to operate, worker can learn qucikly.
4, different products only need to replace with different fixture, convenient operation, accurate location.
