Key specifications/special features:
Technical specifications:
Outer diameter: 60-508mm
Standards: api, sepc, 5ct
Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125
Connection: stc, ltc, btc and premium connection
Inspection: sgs, bv
Certification: iso 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: t/t, 100% l/c at sight
Port of shipment: xingang tianjin, shanghai port, guangdong port, ningbo port, qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
Feature:
Astm a216 wcb, a217 wc6, a351cf8, a351cf8m,
A351 cf3, a351 cf3m, a351 cn7m
Technical speciafication
Design & manufacture standard: api6d, bs1868, api594(wafer type)
Face to face dimensions: ansi/asme b16.10
Flange connection: ansi/asme b16.5 for nps24, asme b16.47a/mss sp-44 for nps>24.
Butt-welding end dimensions: ansi/asme b16.25
Socket-welding dimensions: ansi/asme b16.11
Screw ends dimension: ansi b1.20.1
Inspection & test standard: api6d, api598.
Nopart namewcb/trim 1wcb/trim 5wcb/trim 8cf8/ 304cf8m/316
1body a216 wcb a216 wcb a216 wcba351 cf8a351 cf8m
2seat ringa105+13 cra105+stla105+stla351 cf8a351 cf8m
3disc a216 wcb+13cra216 wcb+stla216 wcb+stla351 cf8a351 cf8m
4arm a216 wcb a216 wcb a216 wcba351 cf8a351 cf8m
5nut a194 2h a194 2h a194 2ha194 8a194 8m
6arm pin182 f6a182 f6a182 f6aa182 f304a182 f316
7yokea216 wcba216 wcba216 wcba351 cf8a351 cf8m
8bonnet nuta194 2ha194 2ha194 2ha194 8a194 8m
9bonnet bolta193 b7a193 b7a193 b7a193 b8a193 b8m
10bolta193 b7a193 b7a193 b7a193 b8a193 b8m
11gasket304+graphite304+graphite304+graphite304+graphite304+graphite
12bonneta216 wcba216 wcba216 wcba351 cf8a351 cf8m
13eye bolta181a181a181astm a181astm a181
Application
RTTS is a mechanical slip packer, mainly applied to formation testing in high temperature and pressure, oil extraction, water injection, water exploration, plugging, squeezing acidification, fracturing and so on.
Structure and Principle
RTTS packer consists of hydraulic anchor, rubber barrel, slip holder, slip, slip bracket, reversing friction block, outer central pipe, inner central pipe, upper joint and so on.
RTTS mechanical slip packer is supported by unidirectional slip. Itâ??s set by pulling, turning and lowering. Released by pulling the column.
Characteristics
1) The rubber barrel is above the slip in order to avoid covering by sand.
2) Simple structure and easy to operate.
Features:
Non-welded, pressed by punching, high strength.
Starting force and restoring force exceed API 10D specifications.
Hinged design allows convenient field installation.
Can be unfolded and stacked faltly, saving storage and transportation cost.
Improves displacement efficiency when installed with turbo blades.
Features of dth rock blasting downhole drill rig:
1.Air pressure:0.4- 0.63mpa
2.Drill bit dia:34-42mm
3.Usage:mine laneway and blasting holes
Characteristics of dth rock blasting downhole drill rig:
The rock drill is a kind of high efficiency air leg rock drill machinery.It is mainly used for diging into mine laneway and blasting holes in all drilling works. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project. It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm, drill hole depth is 5 m this machine may match with model ft160a short air leg , this machine has transparent surface of fy200a oil reservoir, easy to observe the oil lever, adjust oil quantity, ensure the well lubricated. The rock drill is a kind of high efficiency air leg rock drill machinery.It is mainly used for diging into mine laneway and blasting holes in all drilling works. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project. It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm, drill hole depth is 5 m this machine may match with model ft160a short air leg , this machine has transparent surface of fy200a oil reservoir, easy to observe the oil lever, adjust oil quantity, ensure the well lubricated.
Technical specifications:
Outer diameter: 114.3-508mm
Standards: api sepc 5ct, 5b
Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125
Connection: stc, ltc, btc and premium connection
Inspection: sgs, bv
Certification: iso 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: t/t, 100% l/c at sight
Port of shipment: shanghai port, qingdao port or other main ports as per requested
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Used for connection of various hydraulic control system and bop, also for the connection between other hydralic assemblies.
Rated working pressure 2000-10000psi
Nominal bore 1"-4"
1, Casing hanger is classified into two kinds,i.e. the threaded(mandrel) and the slipped; slip casing hanger consist of G,W,WD,WE and other types, WD hanger is applicable for connection of casing head and surface casing and keeps the slip closing around the casing fast in use of outer force, W hanger adopts self-weight energized sealing structure and WE & G hanger is manual-energized sealing structure.
2, Company Information:
Dongying Xincheng Petroleum Technology Co., Ltd. was established in 2003 and located at the second oilfield
of China Shengli Oilfield. We have the specialized technicians, senior engineers and peofessional marking team. The company is committed to develop, manufacture and supply a variety array of oilfield equipments, the main products include : Petroleum equipments & tools such as drilling equipments, production equipment,tubular goods, Wellhead quipments, downhole equipments, well control equipments, cementing tools etc.;Petrochemicals.
We have established a complete quality control system, all products& equipments manufactured as per international standard and API standard.
production 30 days as per quantity
packing: standard
payment: tt 30% in advance, 70% before shipment
Tianjin port or as per requested
Mchanical Liner Hanger,with double cones,double-row slips and double cylinders,is set hydraulically by applying pressure through the run-in string.A setting ball is circulated or dropped to the ball seat built into the landing collar.Applied pressure pushes slips up the cone to the set position.
Features:
1The SSX-A is set hydraulically,applicable to different wells,especially to deep wells.
2With two different setting mechanisms,the SSX-A can set easily.
3Working with SQ setting-ball carrier,the DYX-C is suitable for applications in horizontal or highly-deviated wells.
4The piston sealing element is made of nitrile/fluorine rubber for higher pressure and temperature ratings.
5Main parts are fabricated with high-strength alloy steel providing high burst/collapse resistance.
Property Parameters
Specification,mm244.5 X 177.8mm/139.7mm339.7mm X 244.5mm
Rated Load,t160240
Sealing Capacity,MPa2525
Shearing Pressure of Pins in Cylinder,MPa7~87~8
Casing Wall Thickness,mm10.039.65
11.0510.92
11.9912.19
Casing Weight,Kg/m59.5254.5
64.7368
69.9485
Body Max O.D.,mm215308
Body Min I.D.,mm155220.5
SizeWeightPlain end weightDiameterGradeWall thickness
Lb/ftkg/minmmInmm
2 3/86.656.269.322.37560.3E,X,G,S0.287.11
2 7/810.49.7214.482.87573E,X,G,S0.3629.19
3 1/29.58.8113.123.588.9E0.2546.45
3 1/213.312.3118.343.588.9E,X,G,S0.3689.35
3 1/215.514.6321.793.588.9E0.44911.4
3 1/215.514.6321.793.588.9X,G,S0.44911.4
41412.9319.264101.6E,X,G,S0.338.38
4 1/213.7512.2418.234.5114.3E0.2716.88
4 1/216.614.9822.314.5114.3E,X,G,S0.3378.56
4 1/22018.6927.844.5114.3E,X,G,S0.4310.92
516.2514.8722.155127X,G,S0.2967.52
519.517.9326.715127E0.3629.19
519.517.9326.715127X,G,S0.3629.19
525.624.0335.795127E0.512.7
525.624.0335.795127X,G,S0.512.7
5 1/221.919.8129.515.5139.7E,X,G,S0.3619.17
5 1/224.722.5433.575.5139.7E,X,G,S0.41510.54
6 5/825.222.1933.056.625168.3E,X,G,S0.338.38
6 5/827.724.2136.066.625168.3E,X,G,S0.3629.19
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:water well drill pipe
OD:2.375-140mm
Thickness:0.27-11.4mm
Steel Grade:E75 , X95, G105, S135
Type od end finish:EU-external upset, IEU-internal & external upset
Standard:API 5DP
payment:L/C,TT
Package:bare bundle or as request
Delivery:10-20days after receiving the deposit
Port:xingang, tianjin
Market:Mid east, North/South America,Europe,Asia,Africa etc.
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types.
-
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:,water well drill pipe
OD:,2.375-140mm
Thickness:,0.27-11.4mm
Steel Grade:,E75 , X95, G105, S135
Type od end finish:,EU-external upset, IEU-internal & external upset
Standard:,API 5DP
payment:,L/C,TT
Package:,bare bundle or as request
Delivery:,10-20days after receiving the deposit
Port:,xingang, tianjin
Market:,Mid east, North/South America,Europe,Asia,Africa etc.
The drill collar is used between the drill pipe and the bit in the drill stem. It is used to put weight on the bit so that the bit can drill.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Traceability:
Drill collar material and process traceability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Huanjie offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Thread Protectors:
Our company offers steel, cast steel and plastic steel thread protectors for its drill stem products.
Description
Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work.
It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations.
Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel.
We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc.
All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU.
Specification
Material: AISI 4145H premium alloy steel
Upset style: EU, IEU or IU
Application: 2 3/8" ~ 6 5/8" dill pipes
Tool joint connection
DP nominal weight lb/ft
Steel grade
O.D.(in)
I.D.(in)
Pin tong space(in)
Box tong space(in)
Pin/Box bevel diameter(in)
NC31
10.4
G105
4 1/8
2
7
9
3 61/64
S135
4 3/8
1 5/8
7
9
3 61/64
NC38
13.3
G105
5
2 7/16
8
10 1/2
4 37/64
S135
5
2 1/8
8
10 1/2
4 37/64
NC46
16.6
X95
6 1/4
3
7
10
5 23/32
G105
6 1/4
3
7
10
5 23/32
S135
6 1/4
2 3/4
7
10
5 23/32
NC50
19.5
X95
6 5/8
3 1/4
7
10
6 1/16
G105
6 5/8
3 1/4
7
10
6 1/16
S135
6 5/8
2 3/4
7
10
6 1/16
1. Scope
Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances.
1.1. Excessive injection of cement at one shot.
1.2. The formation cannot bear the gigantic fluid pressure.
1.3. Packoff special strata.
1.4. Avoid the occurrence of annual air channeling after the cementing job.
1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance.
1.6. Two-stage cementing for deviated and horizontal wells
2. Structure
Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug
1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits.
2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve.
3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure.
4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy.
5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening.
6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos
Specifications(in),7"
Opening Pressure(Mpa),7
Closing Pressure(Mpa),5.5
Sealing Capacity(Mpa),,25
Rated Load(t),180
Connection Thread,API 7"
Max. OD. (mm),208
Drill-out ID. (mm),157
Overall Length (mm),990
Length of first-stage plug (mm),320
Length of closing plug (mm),280
Product overviews
Double slip connector is a tool to quickly connect downhole tools to coiled tubing. Double slip connector is different from conventional connector, double slip lock rings make sure the tool lock to the coiled tubing, no need for buckle. Two slip rings can share the load and improve the reliability, two o-rings to seal tubing string.
Advantages
Easy to installation, and quick to connect.
The slip lock ring is special designed, which improves the reliability
Large load capability
Double o-ring seal
Functions
Double slip connector suit for all coiled tubing downhole tools
Load high torque, can connect to mud motor
High strength connection application
Remove one rock ring as single connect
Float collars and float shoe
The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability.
The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist.
The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
Model DCFZ-A hydraulic stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances
1.1. Excessive injection of cement at one shot.
1.2. The formation cannot bear the gigantic fluid pressure.
1.3. Packoff special strata.
1.4. Avoid the occurrence of annual air channeling after the cementing job.
1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance.
1.6. Two-stage cementing for deviated and horizontal wells
2. Structure
Model DCFZ-A hydraulic stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug and closing plug (see Fig. 1). Free-fall opening plug is available upon request.
An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits.
2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve.
3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure.
4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy.
5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening.
6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the closi
Specification (in)72,177.8,
Opening Pressure (MPa)16ï½?18
Opening Acting Force (KN)96ï½?102
Closing Pressure (MPa)5
Closing Acting Force (KN)97
Sealing Capacity (MPa)25
Rated Load (t)180
Connection threadAPI 72 BTC
Max. OD. (mm)208
Drill-out ID. (mm)159.4
Overall Length (mm)930
Length of first-stage plug (mm)320
Length of Closing plug (mm)280
It is hdraulically set by applying pressure through the run-in string. A setting ball is circulated or dropped to a ball seat built into the landing collar.Applied pressure acts on the internal piston and moves slips up the cone to the set position.
Features:
1The DYX-C is to be set hydraulicall,which is designed for applications in all types of wells.
2Working with SQ setting-ball carrier,the DYX-C is suitable for applications in horizontal or highly-deviated wells.
3The piston sealing element is made of nitrile/fluorine rubber for high pressure and temperature ratings.
4Main parts are fabricated with high-strength alloy steel providing high burst/collapse resistance.
Specification,mm,244.5 X �¦177.8mm/�¦139.7mm,177.8 X �¦127mm/�¦114.3mm
Rated Load,t,120,50
Sealing Capacity,MPa,25,25
Shearing Pressure of Pins in Cylinder,MPa,7~8,7~8
Casing Wall Thickness,mm,10.03,9.19
,11.05,10.36
,11.99,11.51
Casing Weight,KG/m,59.52,38.69
,64.73,43.15
,69.94,47.62
Body Max O.D.,mm,215,152
Body Min I.D.,mm,155,108
Technical specifications:
Outer diameter: 114.3-508mm
Standards: API SEPC 5CT, 5B
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
F series mud pump
Main feature:
F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying perfor-mance effectively and extended the lifetime of expendable
Parts in the fluid end greatly.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pump are strictly manufactured according to api spec 7k the equipment specification of well drilling and repairing, and are tested accordingly when leave factory.
Parameter:
EmscoF-1000F-1300Fa-1300F1600Fa-1600Fb-1300Fb-1600F-350F-500F-650F-800Db-550
D-300D-375D-700
IdecoT-500T-800T-1000T-1300T-1600
Garnder-denverPz-7Pz-8Pz-9Pz-10Pz-11Pz-lPa-8PahFy-fxdFo-fxoFd-fxxFg-gxg
Nationaloilwell10-p-13012-p-1608-p-807-p-50K-700K-700aK-500K-500aK-380A1700-ptA1400-ptA1100-pt
220p218pA850-ptA350-ptJws
Ellis williamsW-440-lpWilson600Ppwh
China3nb-3503nb-5003nb-8003nb-10003nb-13003nb-16003nb-2200
F series Mud Pump
Main feature:
F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying perfor-mance effectively and extended the lifetime of expendable
parts in the fluid end greatly.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pump are strictly manufactured according to API Spec 7k â??the Equipment Specification of Well Drilling and Repairing, and are tested accordingly when leave factory.
Parameter:
EMSCOF-1000F-1300FA-1300F1600FA-1600FB-1300FB-1600F-350F-500F-650F-800DB-550
D-300D-375D-700
IDECOT-500T-800T-1000T-1300T-1600
GARNDER-DENVERPZ-7PZ-8PZ-9PZ-10PZ-11PZ-LPA-8PAHFY-FXDFO-FXOFD-FXXFG-GXG
NATIONALOILWELL10-P-13012-P-1608-P-807-P-50K-700K-700AK-500K-500AK-380A1700-PTA1400-PTA1100-PT
220P218PA850-PTA350-PTJWS
ELLIS� WILLIAMSW-440-LPWILSON600PPWH
CHINA3NB-3503NB-5003NB-8003NB-10003NB-13003NB-
F series mud pump
Main feature:
F series mud pump has a longer stroke and can be operated at a lower stroke, thus improved the water supplying perfor-mance effectively and extended the lifetime of expendable
Parts in the fluid end greatly.
The power end uses combined lubricating system of forced lubrication and splash lubrication. Reliable to lubricate and promote the service life of power end.
This series mud pump are strictly manufactured according to api spec 7k the equipment specification of well drilling and repairing, and are tested accordingly when leave factory.
Parameter:
EmscoF-1000F-1300Fa-1300F1600Fa-1600Fb-1300Fb-1600F-350F-500F-650F-800Db-550
D-300D-375D-700
IdecoT-500T-800T-1000T-1300T-1600
Garnder-denverPz-7Pz-8Pz-9Pz-10Pz-11Pz-lPa-8PahFy-fxdFo-fxoFd-fxxFg-gxg
Nationaloilwell10-p-13012-p-1608-p-807-p-50K-700K-700aK-500K-500aK-380A1700-ptA1400-ptA1100-pt
220p218pA850-ptA350-ptJws
Ellis�williamsW-440-lpWilson600Ppwh
China3nb-3503nb-5003nb-8003nb-10003nb-13003nb-16003nb-2200
-
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port or as per requested
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
EXPANDING GATE VALVE
Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
Tight mechanical seal is assured with parallel expanding gate design.
This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
Size: 2-1/16"; 2-9/16"; 3-1/8"; 4-1/16",5-1/8",7-1/16",9"
Rated pressure:2000psi,3000psi,5000psi
Working pressure:LU-XX,YY
PR:1-2 PSL:1-4 MC:AA-EE
Honorary Certificate
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C apprpvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.
API Fully Welded Body Ball Valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements.
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25/ ASME B31.8
Wall thickness:ASME B16.34
Fireproof test:API 607/API 6FA
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 4�~NPS 60�,CL150~CL1500
Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc.
Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc.
Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
-
2 " API safety relief valve
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2?LP
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2? tool joint box
AQF02-140
2? safety valve
140MPa
2?FIG2002 tool joint pin X 2? tool joint box
EXPANDING GATE VALVE
Plastic/chevron packing stays clean and free from contaminants to reduce maintenance costs.
Tight mechanical seal is assured with parallel expanding gate design.
This design provide upstream and downstream sealing simultaneously which is not affected by pressure fluctuation and vibration.
A double row roller thrust bearing on the stem makes operation easy,even under full pressure.
Size: 2-1/16"; 2-9/16"; 3-1/8"; 4-1/16",5-1/8",7-1/16",9"
Rated pressure:2000psi,3000psi,5000psi
Working pressure:LU-XX,YY
PR:1-2 PSL:1-4 MC:AA-EE
Honorary Certificate
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C apprpvals of American Petroleum Institute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.
Gate valves(Ball Screw operation)
The Ball-Screw operation gate valve was developed for large-bore applications,to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers,and results in quicker,safer operations.
The Ball-Screw operation gate valve shares the basic features of the "LS"series:a slab gate,patented seat seal,non-elastomeric stem seals,and metal-to-metal sealing.However,the Ball-Screw operation gate valve has a lower balancing stem and unique ball Screw mechanism
Size:3-1/16",4-1/16",5-1/8",7-1/16"
WP:10,000psi,15,000psi
Temperature:L U,PU
Mat's:AA-FF PSL:1-4 PR:1-2
Honorary Certificate
Our products have been ISO9001 certified and attained API 6A,6D,API 7,7K,and API 16A&16C approvals of American Pertroleum Insitute.All products are fully designed and manufactured in accordance with API,ANSI,GB(national standards)and SY(industry standards)standards.
Gate valves(ball screw operation)
The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations.
The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism
Size:3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:10, 000psi, 15, 000psi
Temperature:l u, pu
Mat's:aa-ff psl:1-4 pr:1-2
Honorary certificate
Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
API Fully Welded Body Ball Valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements.
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25/ ASME B31.8
Wall thickness:ASME B16.34
Fireproof test:API 607/API 6FA
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 4�~NPS 60�,CL150~CL1500
Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc.
Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc.
Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
-
1. Scope
Model DYFZ-A mechanical stage tool is a special tool used to complete the cementing operation in two times. Mainly used in the following circumstances.
1.1. Excessive injection of cement at one shot.
1.2. The formation cannot bear the gigantic fluid pressure.
1.3. Packoff special strata.
1.4. Avoid the occurrence of annual air channeling after the cementing job.
1.5. The considerable temperature difference between the upper and lower section makes it rather difficult to adjust the slurry performance.
1.6. Two-stage cementing for deviated and horizontal wells
2. Structure
Model DYFZ-A mechanical stage tool mainly consists of two-stage coupling (body), shut-off baffle, first-stage plug, Free-fall opening plug and closing plug
1. An anti-rotation device is specially developed to prevent the synchronous rotation of closing sleeve and bits.
2. A particular structure is developed to prevent the possible pre-shutoff of closing sleeve.
3. In the closing sleeve of closed circulation hole, close the locking mechanism to prevent closure put on the back, to achieve permanent closure.
4. All accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy.
5. Free-fall opening plug and pumping-down opening plug are available to realize mechanical opening.
6. The ID. of upper/lower sub should be the same as that of casing, but smaller than that of closing sleeve, which protects the clos
Specifications(in),7"
Opening�Pressure(Mpa),7
Closing�Pressure(Mpa),5.5
Sealing�Capacity(Mpa),,25
Rated�Load(t),180
Connection�Thread,API�7"
Max.�OD.�(mm),208
Drill-out�ID.�(mm),157
Overall�Length�(mm),990
Length�of�first-stage�plug�(mm),320
Length�of�closing�plug�(mm),280
Downhole well drilling tool Roller reamer
The Roller Reamer is designed for various reaming operation but particularly for various reaming operation but particularly for stabilization purpose when drilling in very abrasive formations. It will fit hole sizes ranging from â??6 to 28â?�. In addition, each body by simple adjustment of blocks and proper selection of cutters, will suit a wide range of hole sizes.
Three different types(T, F, and B) of cutters are offered:
Type T: Milled, machined with hardfaced sharp teeth for soft formations.
Type F: Milled, machined with hardfaced flat teeth, for medium hard formations.
Type B: Equipped with pressed-in tungsten carbide buttons, for hard formations.
Aimed at pump rod break, stripping, piston dropping without opening oil drainage unit during operation of oil well, no ordinary oil drainage achievement in heavy oil and paraffin troubled well, environment pollution and so on, rotary oil drainage unit is the patent product (patent no. Zl2005200845803) specially designed and developed. It has advantages of simple structure, easy operation and reliable oil drainage,
Product overviews
Double slip connector is a tool to quickly connect downhole tools to coiled tubing. Double slip connector is different from conventional connector, double slip lock rings make sure the tool lock to the coiled tubing, no need for buckle. Two slip rings can share the load and improve the reliability, two o-rings to seal tubing string.
Advantages
Easy to installation, and quick to connect.
The slip lock ring is special designed, which improves the reliability
Large load capability
Double o-ring seal
Functions
Double slip connector suit for all coiled tubing downhole tools
Load high torque, can connect to mud motor
High strength connection application
Remove one rock ring as single connect
The ztj-a stage collar is the device for discontinuous cementing operation in two times. It mainly consists of two-stage coupling (built-in hollow plug), first-stage plug, shut-off baffle, free-fall opening plug and closing plug.
1 drilling free stage tool use the standalone action model, that is every action, just is the related part to do, other parts will not be affected, prevent the operation mistake, for example, advance opening and advance closing.
2 there have the two plugsdesign for first-stage cementing. That is after first-stage plug downwards to stage tool, and compounded with hollow plug which in the stage tool, use the peculiarity of good isolation impression of hollow plug, solve the question that remain slurry in the inside wall of casing.
3 second-stage cementing use the design of easy open, easy close, slide smoothly. Free-fall plug use the heavy design, closing plug use the design of two element composite, it will realize drilling free cementing operation in the real sense.
4 all accessories, made from premium quality rubber or aluminum material, have very good anti-rotating mechanism that makes drillout easy.
 specification(in) 51/2â inï¼?ð¤139.7mmï¼?
First-stageâ plugâ openingâ pressureï¼?mpa 2
Free-fallâ plugâ openingâ pressureï¼?mpa 6â±1
Closingâ plugâ cosingâ pressureï¼?mpa 6â±1
Sealingâ capacityï¼?mpa 25
Ratedâ loadï¼?t 120
Connectionâ thread Apiâ 51/2inâ ltcâ (btc)
Max. od�mm Ф174
Drill-outâ idï¼?mm Ф118
Lengthâ ofâ first-stageâ plugï¼?mm 363
Lengthâ ofâ free-fallâ plugï¼?mm 240
Lengthâ ofâ closingâ plugï¼?mm 295
Lengthâ ofâ shut-offâ baffle, â mm 320
Overallâ lengthï¼?mm 1090
Technical specifications:
Outer diameter: 114.3-508mm
Standards: api sepc 5ct, 5b
Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125
Connection: stc, ltc, btc and premium connection
Inspection: sgs, bv
Certification: iso 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: t/t, 100% l/c at sight
Port of shipment: shanghai port, qingdao port or other main ports as per requested
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Key specifications/special features:
Technical specifications:
Outer diameter: 60-508mm
Standards: api, sepc, 5ct
Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125
Connection: stc, ltc, btc and premium connection
Inspection: sgs, bv
Certification: iso 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: t/t, 100% l/c at sight
Port of shipment: xingang tianjin, shanghai port, guangdong port, ningbo port, qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
Key Specifications/Special Features:
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
A perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
Ram BOP
Ram type BOP is simple and compact and is suited for land and platform applications. The ram in the BOP is pressure energized. The well pressure acts on the ram to increase the sealing force and maintain the seal even with loss of the closing pressure.
Ram type BOP can be supplied with the hydraulic locking devices to lock ram hydraulically and hold the ram mechanically closed even when actuating pressure is released. The operating system is interlocked using sequence caps to ensure that the taper lock is retracted before pressure is applied to open the BOP.
Ram type BOP?s bonnet are opened and closed by hydraulic pressure and the ram change is quick and easy. All operating parts, as well as, the rams and seals can be replaced on site, thus providing a completely reconditioned preventer.
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port or as per requested
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per client?s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L,
Slot size (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3, also achieved upon customer's request.
Open area up to 60%.
Material: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded.
Packing: plain/bevel end with end caps, Waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001:2000
Delivery lead time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Tianjin, Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
1.Commodity name
Ssaw/spirally double-side submerged arc welded steel pipes
2.Standard
Api5l, astma252, astma139, asmeb36.10, awwac200, en10217-1, en10219-1, en10224sy/t5037, sy/t5040, gb/t9711.1/9711.2, gb/t3091
Anticorrosive coating:awwac205, awwac210, awwac222, awwac214
3.Outer diameter
219.1?3048 mm or 8inch?120inch
4.Wall thickness
5.4mm?25.4 mm
5.Length
6m, 12m or as per customer's requirements
6.Packing
In bulk
7.Payment term
T/t, l/c at sight
8.Delivery time
30 days after receipt of deposit or irrevocable l/c at sight
9.Delivery condition
Beveled or plain end with or without varnish/2pp/2pe/3pe/3pp anticorrosive coating
With or without protecting caps as per customer's requirements;
With fbe internal coating for water steel pipes.
10.Material
A53gr.B, q235b, q345b, 16mn, 20, l245~l555
S235jr, s355jr;l235, l275, l355. Astma252 gr.2, gr.3 st37, st44, st52;gr.B, x42, x46, x52, x56, x60, x65, x70, x80 etc
11.Usage
For petroleum/ natural gas pipeline , for conveying water, drainage, coal gas, mineral slurry and other low-middle pressure liquids. Also for chemical industry, construction, heat-supply, power plant and pile driving projects.
12. Export to
Canada, usa, argentina, peru, chile, colombia, brazil, malaysia, singapore, the czech republic, australia, south africa, spain, italy, etc
13.Certificates
Api 5l; api q1;iso9001:2008;iso14001:2004; ohsas18001:1999.
Description
Drill pipe joint acts for conversion and connection of drill stem component in petroleum, natural gas and geology drilling work.
It is used mainly for connecting of upper drill tools and lower drill tools during drilling operations.
Cross-over sub is API standard Material is AISI 4145H chromium-molybdenum steel.
We can offer Kelly cross-over sub, Drill pipe cross-over sub, Interim cross-over sub, Drill collar cross-over sub, Drill bit cross-over sub, Swivel cross-over sub, Fishing cross-over sub, etc.
All connections are phosphatized, coated with lubricant and provided with thread protectors. All tool joints should be inspected at full length by fluorescence magnetic particle and ultrasonic method. Tool joints are for pipes from 2 3/8" to 6 5/8", grade is E 75, G 105 and S 135; upset style is EU, IEU or IU.
Specification
Material: AISI 4145H premium alloy steel
Upset style: EU, IEU or IU
Application: 2 3/8" ~ 6 5/8" dill pipes
Tool joint connection
DP nominal weight lb/ft
Steel grade
O.D.(in)
I.D.(in)
Pin tong space(in)
Box tong space(in)
Pin/Box bevel diameter(in)
NC31
10.4
G105
4 1/8
2
7
9
3 61/64
S135
4 3/8
1 5/8
7
9
3 61/64
NC38
13.3
G105
5
2 7/16
8
10 1/2
4 37/64
S135
5
2 1/8
8
10 1/2
4 37/64
NC46
16.6
X95
6 1/4
3
7
10
5 23/32
G105
6 1/4
3
7
10
5 23/32
S135
6 1/4
2 3/4
7
10
5 23/32
NC50
19.5
X95
6 5/8
3 1/4
7
10
6 1/16
G105
6 5/8
3 1/4
7
10
6 1/16
S135
6 5/8
2 3/4
7
10
6 1/16
Gate valves(ball screw operation)
The ball-screw operation gate valve was developed for large-bore applications, to provide manual operation at full working pressure with remakably low opening torque.The design eliminates the need for gear-type torque multipliers, and results in quicker, safer operations.
The ball-screw operation gate valve shares the basic features of the "ls"series:a slab gate, patented seat seal, non-elastomeric stem seals, and metal-to-metal sealing.However, the ball-screw operation gate valve has a lower balancing stem and unique ball screw mechanism
Size:3-1/16", 4-1/16", 5-1/8", 7-1/16"
Wp:10, 000psi, 15, 000psi
Temperature:l u, pu
Mat's:aa-ff psl:1-4 pr:1-2
Honorary certificate
Our products have been iso9001 certified and attained api 6a, 6d, api 7, 7k, and api 16a&16c approvals of american pertroleum insitute.All products are fully designed and manufactured in accordance with api, ansi, gb(national standards)and sy(industry standards)standards.
Technical specifications:
Outer diameter: 114.3-508mm
Standards: API SEPC 5CT, 5B
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
Downhole well drilling tool Roller reamer
The Roller Reamer is designed for various reaming operation but particularly for various reaming operation but particularly for stabilization purpose when drilling in very abrasive formations. It will fit hole sizes ranging from ?6 to 28?. In addition, each body by simple adjustment of blocks and proper selection of cutters, will suit a wide range of hole sizes.
Three different types(T, F, and B) of cutters are offered:
Type T: Milled, machined with hardfaced sharp teeth for soft formations.
Type F: Milled, machined with hardfaced flat teeth, for medium hard formations.
Type B: Equipped with pressed-in tungsten carbide buttons, for hard formations.
2 " API safety relief valve
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2?LP
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2? tool joint box
AQF02-140
2? safety valve
140MPa
2?FIG2002 tool joint pin X 2? tool joint box
SizeWeightPlain end weightDiameterGradeWall thickness
Lb/ftkg/minmmInmm
2 3/86.656.269.322.37560.3E,X,G,S0.287.11
2 7/810.49.7214.482.87573E,X,G,S0.3629.19
3 1/29.58.8113.123.588.9E0.2546.45
3 1/213.312.3118.343.588.9E,X,G,S0.3689.35
3 1/215.514.6321.793.588.9E0.44911.4
3 1/215.514.6321.793.588.9X,G,S0.44911.4
41412.9319.264101.6E,X,G,S0.338.38
4 1/213.7512.2418.234.5114.3E0.2716.88
4 1/216.614.9822.314.5114.3E,X,G,S0.3378.56
4 1/22018.6927.844.5114.3E,X,G,S0.4310.92
516.2514.8722.155127X,G,S0.2967.52
519.517.9326.715127E0.3629.19
519.517.9326.715127X,G,S0.3629.19
525.624.0335.795127E0.512.7
525.624.0335.795127X,G,S0.512.7
5 1/221.919.8129.515.5139.7E,X,G,S0.3619.17
5 1/224.722.5433.575.5139.7E,X,G,S0.41510.54
6 5/825.222.1933.056.625168.3E,X,G,S0.338.38
6 5/827.724.2136.066.625168.3E,X,G,S0.3629.19
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per client?s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L
Slot sizes: 0.10, 0.15, 0.2, 0.25, 0.30-3mm, also achieved upon customer request
Open area up to 60%
Materials: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded
Packing: plain/bevel end with end caps, waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
API Fully Welded Body Ball Valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements.
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25/ ASME B31.8
Wall thickness:ASME B16.34
Fireproof test:API 607/API 6FA
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 4NPS 60 CL150~CL1500
Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc.
Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc.
Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
-
Float collars and float shoe
The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability.
The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist.
The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Working Pressure: 35Mpa---105MPa
API Standerard
Product Name: API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Origin Place:Dongying City,China
Assembly: X-Mass Tree Assembly , Valves and other small connections
Material:AA, BB, CC, DD, EE, FF and the other
Brand:RT
Exported to Canada,America,Saudi Arabia,Kuwait,Iraq,UAE,Oman,Pakistan
Packing:Pallet or according to your requirement
Our service:Technical support of assembly the well head products and we have some other oilfield chemicals such as high temperature foaming agent
Aimed at pump rod break, stripping, piston dropping without opening oil drainage unit during operation of oil well, no ordinary oil drainage achievement in heavy oil and paraffin troubled well, environment pollution and so on, rotary oil drainage unit is the patent product (patent no. Zl2005200845803) specially designed and developed. It has advantages of simple structure, easy operation and reliable oil drainage,
2 " API safety relief valve
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2� safety valve
105MPa
2�FIG1502 tool joint pin X 2�LP
AQF02-105
2� safety valve
105MPa
2�FIG1502 tool joint pin X 2� tool joint box
AQF02-140
2� safety valve
140MPa
2�FIG2002 tool joint pin X 2� tool joint box
Feature:
Astm a216 wcb, a217 wc6, a351cf8, a351cf8m,
A351 cf3, a351 cf3m, a351 cn7m
Technical speciafication
Design & manufacture standard: api6d, bs1868, api594(wafer type)
Face to face dimensions: ansi/asme b16.10
Flange connection: ansi/asme b16.5 for nps24, asme b16.47a/mss sp-44 for nps>24.
Butt-welding end dimensions: ansi/asme b16.25
Socket-welding dimensions: ansi/asme b16.11
Screw ends dimension: ansi b1.20.1
Inspection & test standard: api6d, api598.
Nopart namewcb/trim 1wcb/trim 5wcb/trim 8cf8/ 304cf8m/316
1body a216 wcb a216 wcb a216 wcba351 cf8a351 cf8m
2seat ringa105+13 cra105+stla105+stla351 cf8a351 cf8m
3disc a216 wcb+13cra216 wcb+stla216 wcb+stla351 cf8a351 cf8m
4arm a216 wcb a216 wcb a216 wcba351 cf8a351 cf8m
5nut a194 2h a194 2h a194 2ha194 8a194 8m
6arm pin182 f6a182 f6a182 f6aa182 f304a182 f316
7yokea216 wcba216 wcba216 wcba351 cf8a351 cf8m
8bonnet nuta194 2ha194 2ha194 2ha194 8a194 8m
9bonnet bolta193 b7a193 b7a193 b7a193 b8a193 b8m
10bolta193 b7a193 b7a193 b7a193 b8a193 b8m
11gasket304+graphite304+graphite304+graphite304+graphite304+graphite
12bonneta216 wcba216 wcba216 wcba351 cf8a351 cf8m
13eye bolta181a181a181astm a181astm a181
2 " API safety relief valve
1) Safety valves are overpressure protection devices for protecting personnel and equipment, and usually installed in HP operation line for cementing/fracturing pumps, pressure vessels and other equipment under HP and high displacement.
2) The preset pressure value ranging 5000psi to 15000psi(35MPa to 105MPa) is adjusted through the top nut. When pumping pressure or operating pressure exceed the preset value, the safety valves will automatically open for pressure release. While the pressure is less than the preset value, they will be automatically closed.
3) The model of safety valve available: AQF02-105, AQF02-42,rated: 6000psi(42MPa)-15000psi(105MPa).
Construction, connecting mode and size are same as SPM equivalent products;
The butterfly spring inside can realize opening/closing of valves, therefore safety valves can protect people and equipment without shutting down relevant equipment. They are more reliable than shear type safety valves.
Model
Name
Rated pressure
Connection
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2?LP
AQF02-105
2? safety valve
105MPa
2?FIG1502 tool joint pin X 2? tool joint box
AQF02-140
2? safety valve
140MPa
2?FIG2002 tool joint pin X 2? tool joint box
1.Commodity name
Ssaw/spirally double-side submerged arc welded steel pipes
2.Standard
Api5l, astma252, astma139, asmeb36.10, awwac200, en10217-1, en10219-1, en10224sy/t5037, sy/t5040, gb/t9711.1/9711.2, gb/t3091
Anticorrosive coating:awwac205, awwac210, awwac222, awwac214
3.Outer diameter
219.1?3048 mm or 8inch?120inch
4.Wall thickness
5.4mm?25.4 mm
5.Length
6m, 12m or as per customer's requirements
6.Packing
In bulk
7.Payment term
T/t, l/c at sight
8.Delivery time
30 days after receipt of deposit or irrevocable l/c at sight
9.Delivery condition
Beveled or plain end with or without varnish/2pp/2pe/3pe/3pp anticorrosive coating
With or without protecting caps as per customer's requirements;
With fbe internal coating for water steel pipes.
10.Material
A53gr.B, q235b, q345b, 16mn, 20, l245~l555
S235jr, s355jr;l235, l275, l355. Astma252 gr.2, gr.3 st37, st44, st52;gr.B, x42, x46, x52, x56, x60, x65, x70, x80 etc
11.Usage
For petroleum/ natural gas pipeline , for conveying water, drainage, coal gas, mineral slurry and other low-middle pressure liquids. Also for chemical industry, construction, heat-supply, power plant and pile driving projects.
12. Export to
Canada, usa, argentina, peru, chile, colombia, brazil, malaysia, singapore, the czech republic, australia, south africa, spain, italy, etc
13.Certificates
Api 5l; api q1;iso9001:2008;iso14001:2004; ohsas18001:1999.
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per client?s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L,
Slot size (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3, also achieved upon customer's request.
Open area up to 60%.
Material: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded.
Packing: plain/bevel end with end caps, Waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001:2000
Delivery lead time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Tianjin, Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:,water well drill pipe
OD:,2.375-140mm
Thickness:,0.27-11.4mm
Steel Grade:,E75 , X95, G105, S135
Type od end finish:,EU-external upset, IEU-internal & external upset
Standard:,API 5DP
payment:,L/C,TT
Package:,bare bundle or as request
Delivery:,10-20days after receiving the deposit
Port:,xingang, tianjin
Market:,Mid east, North/South America,Europe,Asia,Africa etc.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:,water well drill pipe
OD:,2.375-140mm
Thickness:,0.27-11.4mm
Steel Grade:,E75 , X95, G105, S135
Type od end finish:,EU-external upset, IEU-internal & external upset
Standard:,API 5DP
payment:,L/C,TT
Package:,bare bundle or as request
Delivery:,10-20days after receiving the deposit
Port:,xingang, tianjin
Market:,Mid east, North/South America,Europe,Asia,Africa etc.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:water well drill pipe
OD:2.375-140mm
Thickness:0.27-11.4mm
Steel Grade:E75 , X95, G105, S135
Type od end finish:EU-external upset, IEU-internal & external upset
Standard:API 5DP
payment:L/C,TT
Package:bare bundle or as request
Delivery:10-20days after receiving the deposit
Port:xingang, tianjin
Market:Mid east, North/South America,Europe,Asia,Africa etc.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:water well drill pipe
OD:2.375-140mm
Thickness:0.27-11.4mm
Steel Grade:E75 , X95, G105, S135
Type od end finish:EU-external upset, IEU-internal & external upset
Standard:API 5DP
payment:L/C,TT
Package:bare bundle or as request
Delivery:10-20days after receiving the deposit
Port:xingang, tianjin
Market:Mid east, North/South America,Europe,Asia,Africa etc.
API 5" OD NC-50 /Heavy weight drill pipe and drill collar good quality
Product Description
1. Strictly according to API 5DP standard
2. Yield strength: Min 517 Mpa
3. Tensile strength: Min 724 Mpa
4. Pipe body material: High quality alloy seamless pipe of E75
5. Thread treatment: Phosphorization or copper plating
6. The material is seamless steel pipe from China most famous enterprise Baosteel and
Tianjin seamless steel.
Drill pipe quality control:
1.Before order to be confirmed, the raw material of pipe and tool joint body should be booked from famous big steel enterprises in China.
2.Checked by our QC staff and factory own laboratory.
3.Every drill pipe has nondestructive inspection , cleaned and breach oil before packing.
4.Before delivery clients could send one QC or point the third party to check the quality such SGS, BV or others.
Drill pipe usage notes:
1.New drill pipe should be pasted thread oil before connection
2.Make up and break at least 3 times before drilling
3.Hard bending and plastic coating can be processed according to costumer special requirement.
Name:water well drill pipe
OD:2.375-140mm
Thickness:0.27-11.4mm
Steel Grade:E75 , X95, G105, S135
Type od end finish:EU-external upset, IEU-internal & external upset
Standard:API 5DP
payment:L/C,TT
Package:bare bundle or as request
Delivery:10-20days after receiving the deposit
Port:xingang, tianjin
Market:Mid east, North/South America,Europe,Asia,Africa etc.
NameJetsun drill pipe
PartsKelly (square kelly,hexagonal kelly),drill pipe,Drill pipe joints,Heavy Weight Drill Pipe(HWDP)
Size (API)OD: 2 3/8''- 6 5/8''
Length: R1 R2 R3
Customized according to drawing or requirements
MaterialE75,X95,G105,S135,SS-95,SS-105,S-135T,Z-140,V-150 and so
StandardAPI 5DP
Upset Ends for
Weld-on Tool
JointsEU, IU,IEU
Drill pipe jointsMale and Female , API standard connection,SGDS connection,SGHT connection,SGET connection
Connection threads style for drill toolNC(number)-API, ZF(internal-flush), FH(full hole), REG(regular)
Thread type of NC(number)-APINC26,NC31,NC38,NC40,NC46
Steel gradeD,E,X,G,S
ApplicationUsed in oil well drilling.It is mainly used for drilling process and after
completion of borehole wall support, to ensure that the drilling process
and the whole Wells after completion are normal running .
Specifications
1) Certificate: API 5DP, ISO 9001, ISO 29001
2) OD: 2 3/8" to 6 5/8" or 60.32mm to 139.7mm
3) Grade:G105,S135,E75,X95
API Oil Drill Pipe
1.Main features:
A. The drill rods comply with the provisions under the Standards API
SPEC 5D and API SPEC7.
B. The grade of steel for the drill pipe are determined according to the
requirements of Group 1 and Group 3 of API SPEC 5D.
C. Drill pipe joints at the same level can be supplied, and comply with the provisions
under the Standard API SPEC 7.
Product Description
Sell API-5CT Casing, Tubing, Coupling.
Our factory manufacture Casing, Tubing:
According to API SPEC 5CT.
Steel grade: J55, K55, L80, N80, C95, P110
O. D. Range Tubing: From 2-3/8"to 4-1/2"(EUE/NU)
Casing: From 4-1/2" to 20",
Threads: BTC, LTC, STC.
Length range: R1, R2, R3
Specifications
1. API standard.
2. ISO certificate.
3. Register with Sinopec.
4. Technical service.
5. Professional service for export.
Standard Heavyweight Drill Pipe (HWDP), was developed to provide a gradual transition from heavy drill collars to relatively lightweight drill pipe. This intermediate weight pipe has a wall thickness of approximately one inch, and helps prevent stress concentration at the top of drill collars. HWDP also allows drilling at higher RPMs, reducing torque and differential pressure sticking.
HWDP is well-suited for directional drilling. Because it bends easily, it simplifies directional control and minimizes connection fatigue problems common to high-angle or horizontal drilling.
For extended reach and horizontal wells, especially in wells where the total vertical depth to total measured depth ratio is low, high strength heavyweight drill pipe is often used high in the hole toapply weight on the bit.
Various combinations of HWDP, drill collars and standard drill string components can be created to meet the challenges of severe drilling conditions.
API drill pipe drilling pipe manufacture HWDP Non Magnetic HWDP & Heavy Weight Drill Pipe & Oil Drilling HWDP
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per client?s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L,
Slot size (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3, also achieved upon customer's request.
Open area up to 60%.
Material: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded.
Packing: plain/bevel end with end caps, Waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001:2000
Delivery lead time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Tianjin, Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
All products will be made according to API and related international standard as per customers' requirements.
Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost.
Type
O.Dmm(inch)
Connection
Lengthmm(inch)
KHS 5
230(9-1/16)
BCSG,LCSG
125(4-15/16)
KHS 5-1/2
235(9-1/4)
BCSG,LCSG
125(4-15/16)
KHS 7
275(10-13/16)
BCSG,LCSG
125(4-15/16)
KHS 9-5/8
335(13-3/16)
BCSG,LCSG
145(5-45/64)
KHS 10-3/4
362(14-1/4)
BCSG,?CSG
115(4-9/16)
KHS 13-3/8
425(16-47/64)
BCSG,?CSG
115(4-9/16)
KHS 16
500(19-11/16)
BCSG,CSG
125(4-15/16)
KHS 18-5/8
565(22-1/4)
BCSG,CSG
125(4-15/16)
KHS 20
610(24)
BCSG,?LCSG
145(5-45/64)
Rubber packer is a kind of self-sealing packer. The pipe annulus is sealed by interference cup and casing inwall. On the impact of downhole pressure difference, cup expanses to seal the annulus and it just can bear one-way big pressure differential.
It is mainly composed of upper joint, cup and center tube.
Od-id-height
Pressure
Temperature
112-75-80
70mpa
150
148-112-80
45mpa
150
148-102-80
45mpa
150
112-80-80
70mpa
150
112-70-80
70mpa
150
114-73-80
35mpa
120
114-73-70
35mpa
120
113-80-65
50mpa
120
113-80-57
50mpa
120
113-74-85
20mpa
90
113-74-75
20mpa
90
114-74-85
35mpa
90
114-74-70
35mpa
90
Float collars and float shoe
The float collars and float shoe are used to guide the casing to be put into the hole. It can adjust the floating power of the casing when the casing been laid in. That can certify the qualification of the cementing. The float collars and float shoe manufactured by our company use the spring driving back-pressure valve type. It has a high reliability.
The structures are similar between float collar and float shoe. The lower end of the float collar is the pin connection which is connected with the casing. The upper end which is used for filling the cement has acinqfoil hole which can avoid the twist.
The material of the float shoe body is the alloy steel . The upper end of the float shoe is connected with casing and its lower end is connected with the semilunar cement head. You can use the guide casing to lead it into the drilling hole. There is a back-pressure valve in the float shoe. You can use the oil well cement to fill the area between the float shoe and the body. The back-pressure can be cut by back-pressure valve. The upper hole and the lower hole will be open when the products after done . After the pressure of the circulating mud press the valve head into the lower place, the three collar valve on the valve tail will fall down automatically. The valve will press the valve seat tightly at the function of spring after the cement injection. And it will as a one-way valve function in the working. At that time, you could inject the mud into the pump from the upper end to the lower end, but the liquid of the well won`t be back in the casing below the valve or the outside circulation area of the casing.
The Integral Spiral Blade Stabilizer is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5051-91 Standard. It is mainly used to stabilize the drilling tools in the process of drilling hole. It can be separated into Drill String and Near bit types.
-
Technical specifications:
Outer diameter: 114.3-508mm
Standards: API SEPC 5CT, 5B
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
Itempropertyseamless steel pipe
1techniquehot rolling; cold drawing; ndt test; ut test; hydrostatic tester
2usageused for low pressure liquid delivery, such as water, gas, and oil; construction and piling
3standardapi 5l, api 5ct, astm a106/a53, astm a519, jis g 3441, jis g3444,
Jis g3445 din 2391, en10305, en10210, asme sa106, sa192, sa210, sa213, sa335, din17175, astm a179�
4certificationapi 5l psl1 / psl2, api 5ct, iso 9001-2008
5gradeapi 5l :api 5l: gr b, x42, x46, x56, x60, x65, x70
Astm a53/a106: gr a, gr b, gr casme sa106: gr.A, gr.B, gr.Casme
Sa192:
Sa192asme sa209m: t1, t1a
Astm a335:p1, p2, p5, p9, p11, p22, p23
Astm a333:gr.1, gr.3, gr.4, gr.6, gr.7, gr.8, gr.9, gr.10, gr.11
6out diameter10.3mm 762mm
7wall thicness1.73-63.5mm
8lengthrandom length, fixed length, srl, drl
9endbeveled end, plain end meet your need
10surface tratmentblack painting, bare pipe, oiled, hot dip galvanized
11moq20mt
12delivery conditionbks, nbk, bk, bkw, gbk(+a), nbk(+n), bk(+c)
13package1. Big diameter: in loose
2. Small diameter:packaged in bundles with strips
3. As per clients' requirement
Standard:Api 5l, api 5ct, astm a106/a53, astm a519, jis g 3441, jis g3444,
Jis g3445 din 2391, en10305, en10210, asme sa106, sa192, sa210, sa213,
Sa335, din17175, astm a179
Certificate:Api 5l psl1 / psl2, api 5ct, iso 9001-2008
Out diameter:1/8 30 inch (10.3-762mm)
Wall thickness:0.049'' 2.5'' (1.24- 63.5mm)
Length:Random length, fixed length, srl, drl
Steel grade: Api 5l :api 5l: gr b, x42, x46, x56, x60, x65, x70
Astm a53/a106: gr a, gr b, gr c
Asme sa106: gr.A, gr.B, gr.C
Asme sa192: asme sa209 m: t1, t1a
Astm a335:p1, p2, p5, p9, p11, p22, p23
Astm a333:gr.1, gr.3, gr.4, gr.6, gr.7, gr.8, gr.9, gr.10, gr.11
Surface treatment:Fusion bond epoxy coating, coal tar epoxy, 3pe, vanish coating, bitumen coating, black oil coating as per customers requirement
Test:Chemical component analysis, mechanical properties (ultimate tensile strength, yield strength, elongation), technical properties (flattening test, bending test, blow test, impact test), exterior size inspection, hydrostatic test, x-ray test.
Mill test certificate: En 10204/3.1b
Key Specifications/Special Features:
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
A perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per clientâ??s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L,
Slot size (mm): 0.10, 0.15, 0.2, 0.25, 0.30-3, also achieved upon customer's request.
Open area up to 60%.
Material: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded.
Packing: plain/bevel end with end caps, Waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001:2000
Delivery lead time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Tianjin, Shanghai port, Qingdao port
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
SizeWeightPlain end weightDiameterGradeWall thickness
Lb/ftkg/minmmInmm
2 3/86.656.269.322.37560.3E,X,G,S0.287.11
2 7/810.49.7214.482.87573E,X,G,S0.3629.19
3 1/29.58.8113.123.588.9E0.2546.45
3 1/213.312.3118.343.588.9E,X,G,S0.3689.35
3 1/215.514.6321.793.588.9E0.44911.4
3 1/215.514.6321.793.588.9X,G,S0.44911.4
41412.9319.264101.6E,X,G,S0.338.38
4 1/213.7512.2418.234.5114.3E0.2716.88
4 1/216.614.9822.314.5114.3E,X,G,S0.3378.56
4 1/22018.6927.844.5114.3E,X,G,S0.4310.92
516.2514.8722.155127X,G,S0.2967.52
519.517.9326.715127E0.3629.19
519.517.9326.715127X,G,S0.3629.19
525.624.0335.795127E0.512.7
525.624.0335.795127X,G,S0.512.7
5 1/221.919.8129.515.5139.7E,X,G,S0.3619.17
5 1/224.722.5433.575.5139.7E,X,G,S0.41510.54
6 5/825.222.1933.056.625168.3E,X,G,S0.338.38
6 5/827.724.2136.066.625168.3E,X,G,S0.3629.19
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per clientâ??s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L
Slot sizes: 0.10, 0.15, 0.2, 0.25, 0.30-3mm, also achieved upon customer request
Open area up to 60%
Materials: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded
Packing: plain/bevel end with end caps, waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
Itempropertyseamless steel pipe
1techniquehot rolling; cold drawing; ndt test; ut test; hydrostatic tester
2usageused for low pressure liquid delivery, such as water, gas, and oil; construction and piling
3standardapi 5l, api 5ct, astm a106/a53, astm a519, jis g 3441, jis g3444,
Jis g3445 din 2391, en10305, en10210, asme sa106, sa192, sa210, sa213, sa335, din17175, astm a179â?¦
4certificationapi 5l psl1 / psl2, api 5ct, iso 9001-2008
5gradeapi 5l :api 5l: gr b, x42, x46, x56, x60, x65, x70
Astm a53/a106: gr a, gr b, gr casme sa106: gr.A, gr.B, gr.Casme
Sa192:
Sa192asme sa209m: t1, t1a
Astm a335:p1, p2, p5, p9, p11, p22, p23
Astm a333:gr.1, gr.3, gr.4, gr.6, gr.7, gr.8, gr.9, gr.10, gr.11
6out diameter10.3mm 762mm
7wall thicness1.73-63.5mm
8lengthrandom length, fixed length, srl, drl
9endbeveled end, plain end meet your need
10surface tratmentblack painting, bare pipe, oiled, hot dip galvanized
11moq20mt
12delivery conditionbks, nbk, bk, bkw, gbk(+a), nbk(+n), bk(+c)
13package1. Big diameter: in loose
2. Small diameter:packaged in bundles with strips
3. As per clients' requirement
1.Commodity name
Ssaw/spirally double-side submerged arc welded steel pipes
2.Standard
Api5l, astma252, astma139, asmeb36.10, awwac200, en10217-1, en10219-1, en10224sy/t5037, sy/t5040, gb/t9711.1/9711.2, gb/t3091
Anticorrosive coating:awwac205, awwac210, awwac222, awwac214
3.Outer diameter
219.1â??3048 mm or 8inchâ??120inch
4.Wall thickness
5.4mmâ??25.4 mm
5.Length
6m, 12m or as per customer's requirements
6.Packing
In bulk
7.Payment term
T/t, l/c at sight
8.Delivery time
30 days after receipt of deposit or irrevocable l/c at sight
9.Delivery condition
Beveled or plain end with or without varnish/2pp/2pe/3pe/3pp anticorrosive coating
With or without protecting caps as per customer's requirements;
With fbe internal coating for water steel pipes.
10.Material
A53gr.B, q235b, q345b, 16mn, 20, l245~l555
S235jr, s355jr;l235, l275, l355. Astma252 gr.2, gr.3 st37, st44, st52;gr.B, x42, x46, x52, x56, x60, x65, x70, x80 etc
11.Usage
For petroleum/ natural gas pipeline , for conveying water, drainage, coal gas, mineral slurry and other low-middle pressure liquids. Also for chemical industry, construction, heat-supply, power plant and pile driving projects.
12. Export to
Canada, usa, argentina, peru, chile, colombia, brazil, malaysia, singapore, the czech republic, australia, south africa, spain, italy, etc
13.Certificates
Api 5l; api q1;iso9001:2008;iso14001:2004; ohsas18001:1999.
Standard:Api 5l, api 5ct, astm a106/a53, astm a519, jis g 3441, jis g3444,
Jis g3445 din 2391, en10305, en10210, asme sa106, sa192, sa210, sa213,
Sa335, din17175, astm a179
Certificate:Api 5l psl1 / psl2, api 5ct, iso 9001-2008
Out diameter:1/8 30 inch (10.3-762mm)
Wall thickness:0.049'' 2.5'' (1.24- 63.5mm)
Length:Random length, fixed length, srl, drl
Steel grade: Api 5l :api 5l: gr b, x42, x46, x56, x60, x65, x70
Astm a53/a106: gr a, gr b, gr c
Asme sa106: gr.A, gr.B, gr.C
Asme sa192: asme sa209 m: t1, t1a
Astm a335:p1, p2, p5, p9, p11, p22, p23
Astm a333:gr.1, gr.3, gr.4, gr.6, gr.7, gr.8, gr.9, gr.10, gr.11
Surface treatment:Fusion bond epoxy coating, coal tar epoxy, 3pe, vanish coating, bitumen coating, black oil coating as per customers requirement
Test:Chemical component analysis, mechanical properties (ultimate tensile strength, yield strength, elongation), technical properties (flattening test, bending test, blow test, impact test), exterior size inspection, hydrostatic test, x-ray test.
Mill test certificate: En 10204/3.1b
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
Itempropertyseamless steel pipe
1techniquehot rolling; cold drawing; ndt test; ut test; hydrostatic tester
2usageused for low pressure liquid delivery, such as water, gas, and oil; construction and piling
3standardapi 5l, api 5ct, astm a106/a53, astm a519, jis g 3441, jis g3444,
Jis g3445 din 2391, en10305, en10210, asme sa106, sa192, sa210, sa213, sa335, din17175, astm a179�
4certificationapi 5l psl1 / psl2, api 5ct, iso 9001-2008
5gradeapi 5l :api 5l: gr b, x42, x46, x56, x60, x65, x70
Astm a53/a106: gr a, gr b, gr casme sa106: gr.A, gr.B, gr.Casme
Sa192:
Sa192asme sa209m: t1, t1a
Astm a335:p1, p2, p5, p9, p11, p22, p23
Astm a333:gr.1, gr.3, gr.4, gr.6, gr.7, gr.8, gr.9, gr.10, gr.11
6out diameter10.3mm 762mm
7wall thicness1.73-63.5mm
8lengthrandom length, fixed length, srl, drl
9endbeveled end, plain end meet your need
10surface tratmentblack painting, bare pipe, oiled, hot dip galvanized
11moq20mt
12delivery conditionbks, nbk, bk, bkw, gbk(+a), nbk(+n), bk(+c)
13package1. Big diameter: in loose
2. Small diameter:packaged in bundles with strips
3. As per clients' requirement
SizeWeightPlain end weightDiameterGradeWall thickness
Lb/ftkg/minmmInmm
2 3/86.656.269.322.37560.3E,X,G,S0.287.11
2 7/810.49.7214.482.87573E,X,G,S0.3629.19
3 1/29.58.8113.123.588.9E0.2546.45
3 1/213.312.3118.343.588.9E,X,G,S0.3689.35
3 1/215.514.6321.793.588.9E0.44911.4
3 1/215.514.6321.793.588.9X,G,S0.44911.4
41412.9319.264101.6E,X,G,S0.338.38
4 1/213.7512.2418.234.5114.3E0.2716.88
4 1/216.614.9822.314.5114.3E,X,G,S0.3378.56
4 1/22018.6927.844.5114.3E,X,G,S0.4310.92
516.2514.8722.155127X,G,S0.2967.52
519.517.9326.715127E0.3629.19
519.517.9326.715127X,G,S0.3629.19
525.624.0335.795127E0.512.7
525.624.0335.795127X,G,S0.512.7
5 1/221.919.8129.515.5139.7E,X,G,S0.3619.17
5 1/224.722.5433.575.5139.7E,X,G,S0.41510.54
6 5/825.222.1933.056.625168.3E,X,G,S0.338.38
6 5/827.724.2136.066.625168.3E,X,G,S0.3629.19
Key Specifications/Special Features:
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
A perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Technical specifications:
Outer diameter: 114.3-508mm
Standards: api sepc 5ct, 5b
Steel grades: h40, j55, k55, n80, l80, c90, c95, t95, p110, q125
Connection: stc, ltc, btc and premium connection
Inspection: sgs, bv
Certification: iso 9001:2000
Delivery lead-time: after received deposit 10-60 days according to the quantity
Payment terms: t/t, 100% l/c at sight
Port of shipment: shanghai port, qingdao port or other main ports as per requested
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery
1. Inquiry evaluation:
All technical data of each inquiry must be evaluated by company professional expert and get confirmation by our cooperation mill, we can confirm that all the technical data can satisfy the client's requirement and related standard
2. On-line production supervision:
Online production supervision can cover the entire production process, in accordance with the contract requirements and technical specifications
Supervision is begin from the re-examination of raw materials, process assessment, the production of internal control, test items, mark, packing and all the other aspects of a full range of production
3. Final product inspection:
Detection of the product in accordance with international and national standards, including: the physical performance testing, chemical analysis, nondestructive testing, reliability testing and packing report
4. Logistics survey:
Monitor product handling, storage, strapping, transport loading and other logistics chain
Ram BOP
Ram type BOP is simple and compact and is suited for land and platform applications. The ram in the BOP is pressure energized. The well pressure acts on the ram to increase the sealing force and maintain the seal even with loss of the closing pressure.
Ram type BOP can be supplied with the hydraulic locking devices to lock ram hydraulically and hold the ram mechanically closed even when actuating pressure is released. The operating system is interlocked using sequence caps to ensure that the taper lock is retracted before pressure is applied to open the BOP.
Ram type BOPâ??s bonnet are opened and closed by hydraulic pressure and the ram change is quick and easy. All operating parts, as well as, the rams and seals can be replaced on site, thus providing a completely reconditioned preventer.
All products will be made according to API and related international standards as per customers' requirements.
Shale shaker is first phase solids control equipment in drilling fluids processing system, also known as key solids control equipment in drilling mud system, shale shaker decides performance of the whole solids control system. Lake Solids Control can design double shakers and triplicate shakerson single skid according to clientsâ??special requirements and also supply relevant connecting manifold, according to current industry situation, We provide both third generation linear motion shale shaker and fourth generation balanced elliptical shale shaker.
ZS linear motion shale shaker absorbed advanced tech at home and abroad ,and integrated GN own design. Our complete series shale shaker can meet customers variable demand. Clients feedback proved the advantages of this kind of shale shaker: high G-force, wide screen area, compressed structure, cost-effective, etc.
Features:
Patent shale shaker deck angle adjustable while working, mechanical deck angle adjustment with reliable performance.
Patent tighten rubber sealing for shale shaker deck and screen, long life and easy replacement.
Shale shaker bottom deck made from Stainless Steel for long service life.
Heat treatment on complete shale shaker deck for High G force operation.
Pretensioned shale shaker screen for fast screen replacement
Famous Brand Vibration Motors : IEC Ex, ATEX and UL Certified
Electrical components: SIEMENS, Schneider Brand
Flexible feeding type including Weir Feed, Top Feed, and Hopper Feed for different applications.
Parameters Specify
Vibration Mode Linear Motion
Capacity 45m/h(200GPM)-140m/h(616GPM)
Vibration Motor 20.75Kw-21.94Kw
Screen Qty 2 Panels-6 Panels
Screen Size 750 900mm-585 1165mm (Upper Layer:2.0m)
Screen Area 1.35m 2.7m (Under Layer:2.6 m)
Adjustable G Force 7.1G-7.5G
Vibration Amplitude 3.92~5.62mm-4.14~5.96mm
Deck Angle Range from +2 to 1~+5
Weir Height 710mm-895mm
EX Standard ExdIIBt4/IEC EX/ATEX
Weight 907kg-1864kg
Dimension:mm 1676 1728 1062-272 2025 1428
Remarks Above capacity only for reference, actual capacity will be various as per screen API No. and mud conditions
API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Working Pressure: 35Mpa---105MPa
API Standerard
Product Name: API Choke manifold and Kill manifold 105MPa to 35 Mpa for oilfield
Origin Place:Dongying City,China
Assembly: X-Mass Tree Assembly , Valves and other small connections
Material:AA, BB, CC, DD, EE, FF and the other
Brand:RT
Exported to Canada,America,Saudi Arabia,Kuwait,Iraq,UAE,Oman,Pakistan
Packing:Pallet or according to your requirement
Our service:Technical support of assembly the well head products and we have some other oilfield chemicals such as high temperature foaming agent
API 6D Carbon Steel Slab Gate Valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25
Wall thickness:ASME B16.34
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 2â?³~NPS 60â?³,CL150~CL1500
Main body material:WCB,LCB,WCC,WC6,WC9,CF8,CF8M,CF3,CF3M,A890 4A etc.
Drive device:handle, bevel gear, electric, pneumatic, etc.
-
API 6D expanding gate valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25
Wall thickness:ASME B16.34
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 2â?³~NPS 36â?³,CL150~CL900
Main body material:WCB,LCB,WCC,WC6,WC9,CF8,CF8M,CF3,CF3M,A890 4Aetc.
Drive device:handle, bevel gear, electric, pneumatic, etc.
-
API Fully Welded Body Ball Valve
Product design and scope
Design standard:API 6D
Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements.
Flange connecting end:ASME B16.5/ASME B16.47
Butt welding connecting end:ASME B16.25/ ASME B31.8
Wall thickness:ASME B16.34
Fireproof test:API 607/API 6FA
Inspection and test:API 6D
Pressure and temperature rating:ASME B16.34
Product scope:NPS 4â?³~NPS 60â?³,CL150~CL1500
Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc.
Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc.
Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc.
-
The choke valve, a main component of Christmas tree, is design to control production rate of the oil well, with working pressure up to 15000psi. Choke valves can be classified as follows: adjustable choke valves and positive choke valves. By rotating hand wheel to move the stem, the adjustable choke valve is designed to adjust the effective area available for the flow to accomplish control of production rate. The positive choke valve is design to accomplish control of production rate by changing flow beans.
Features:
The coupling nut used for connecting the bonnet and body allows fast make-up and break-out.
Stem tip and bean adaptor are fabricated from special carbide alloys for corrosion and abrasion resistance.
Indicator lens with scale marks allows the operator to know stemâ??s position and actual orifice area.
Turn hand wheel counter-clockwise and the valve will open; turn hand wheel clockwise and the valve will close.
Main technical datum
Working Pressure: 2,000-20,000psi
Nominal Dimension: 2-1/16 ~ 7-1/16
Working Temperature: P U
Product Specification Levels: PSL1 ~ 4
Performance Requirement: PR1 ~ 2
material Class: AA ~ FF
Working Medium: crude oil; natural gas
Adjustable choke valve
Valve needle and spool are made of tungsten carbide, with sufficient corrosion resistant, antieroding and wearable capability.
The two kinds of adjustable choke, pintle type and the sleeve type could apply to wellheads& X-mas tree and choke manifold.
Positive choke valve
Material of choke bean is fabricated from ceramic and tungsten carbide, with sufficient corrosion resistant, anti-eroding and wearable capability.
It adopts union bonnet so as to change choke quickly
It has application in wellhead& X-mas tree and choke line.
-
1. Descriptions:
The cementing head is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body,and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
Not only common thread,also special thread cement head can be produced including NEW VAM,VAM TOP,FJ ETC.
Main Parameters
2. Technical specification and parameter:
Type ST35-140 ST35-178 ST35-140 ST35-140
Size 139.7(5 1/2") 177.8(7") 244.5(9 5/8") 339.7(13 3/8")
Max.working pressure 35Mpa 35Mpa 35Mpa 20Mpa
Casing coupling thread 5 1/2" LTC/BTC 7" LTC/BTC 9 5/8" LTC/BTC 13 3/8"LTC/BTC
Manifold interface 2" union 2" union 2" union 2" union
ID of plug container (mm) 125 160 225 320
Length of plug container (mm) 450 460 560 560
Overall length 1886 1972 1701 2210
-
All products will be made according to API and related international standard as per customers' requirements.
This hydraulic winch is a lifting equipment driven and braked hydraulically. It has the advantages of compact structure, light weight, convenient operation and stable lifting. It is used to lift heavy things in mines, ports and construction site. The winch is designed and manufactured according to API Spec 7K â??Specification for Drilling Equipmentâ??.
Model YJ3/150 YJ5/100
Flow rating L/min 120 120
gpm 31.7 31.7
Pressure rating Mpa 16.6 16.6
psi 2400 2400
Pull rating kN 3 5
US ton 3.3 5.5
Average rope speed m/min 27 11
ft/min 89 36
Wire rope diameter mm 15.5 20.5
in 5/8 3/4
Rope storage m 150 100
ft 492 328
Size mm 690480440 880520710
in 271918 352128
Weight kg 230 490
lb 507 1080
1. Descriptions:
The cementing head is a common cementing tool used as wellhead unit in all kinds of cementing operation. Comparing to cement-head with single plug, it owns longer cement-head body,and upper rubber plug and lower rubber plug can be put in at same time.
The tool owns some advantages such as simple construction, easy operation, high pressure resistant, manifold in common use, flexible in connecting. Especially, the lever type indicator can shows whether rubber plug goes through double plugs cement-head to enter casing so that operator can determine easily.
Not only common thread,also special thread cement head can be produced including NEW VAM,VAM TOP,FJ ETC.
Main Parameters
2. Technical specification and parameter:
Type ST35-140 ST35-178 ST35-140 ST35-140
Size 139.7(5 1/2") 177.8(7") 244.5(9 5/8") 339.7(13 3/8")
Max.working pressure 35Mpa 35Mpa 35Mpa 20Mpa
Casing coupling thread 5 1/2" LTC/BTC 7" LTC/BTC 9 5/8" LTC/BTC 13 3/8"LTC/BTC
Manifold interface 2" union 2" union 2" union 2" union
ID of plug container (mm) 125 160 225 320
Length of plug container (mm) 450 460 560 560
Overall length 1886 1972 1701 2210
-
BOP parts that we supply all come from original manufacturers, they are 100% interchangeable.
BOP PART NAME: top sealing, front sealing, pipe ram, blind ram, slip ram, shear ram, spherical packer, bonnet, piston, shell.
APPLY TO BELOW BOP:
Brand: SHENKAI BOP. RONGSHENG BOP ETC OTHER FAMOUS BRAND BOP
Type: Annular BOP, Single Ram BOP, Double Ram BOP, Shear Ram BOP
Technical parameter
Specification:
1. Standad: API 16 A and ISO 9001
2. Rated Pressure: 2000Psi to 15000Psi(14-17 Mpa)
3. Size: Nominal Bore: 7-1/16" to 21-1/4" (179.4mm to 539.75mm)
4. Type: Shear Ram/ Pipe Ram/ Variable Bore Ram
5. Usage : Single Ram BOP/ Double Ram BOP/ Three Ram BOP
6.Brand:Shenkai and Rongsheng.
7.Imitate: Camaron and Shaffer
8.U type and SH type
Characters of BOP pare parts:
In the structure, it is divided into annular blowout preventer with spherical plastic core, annular blowout preventer with cone-shaped plastic core, and blowout preventer with tube-shaped plastic core. Annular BOP top cap and housing are connected by bolts or claw blocks.
Blowout preventer with spherical plastic core and dust-proof ring.
Performance characteristics: reasonable structure, easy operation, long life of plastic core, adapt to a wide range, capable to seal pipe string with nominal paths from 0-DN in ans shapes, better performance by combining with ran blowout preventer in the use.
Working of BOP pare parts:
When wells must be sealed in case of kicks high pressure (10.5Mpa) oil from control systems enters into close-cavity under piston from housing oil outlet, to promote plastic core moving upward along ball surface, so that bearing tendons move closer to each other to moce the rubber between them to the center of wellhead so as to seal drilling tools or fully seal wellhead. In opening , hydraulic pressure oul enters into open-cavity above piston from housing oul inlet, to push piston moving downwards , so that plastic will reset with its own elasticity, wellhead will be open.
-
The control system for surface mounted bop stacks is an important equipment for the control of bop stacks.choke and kill valves in the drilling and workover drilling operations .it has already passed the certificate of spec 16D.
The ground blowout preventercontrol system produced by Lakepetro company has large size and many controls and can be provied with multi-function alarming system ,low-temperature heating system ,nitrogen standby system auxiliary control console and other clocices.
-
Mchanical Liner Hanger,with double cones,double-row slips and double cylinders,is set hydraulically by applying pressure through the run-in string.A setting ball is circulated or dropped to the ball seat built into the landing collar.Applied pressure pushes slips up the cone to the set position.
Features:
1The SSX-A is set hydraulically,applicable to different wells,especially to deep wells.
2With two different setting mechanisms,the SSX-A can set easily.
3Working with SQ setting-ball carrier,the DYX-C is suitable for applications in horizontal or highly-deviated wells.
4The piston sealing element is made of nitrile/fluorine rubber for higher pressure and temperature ratings.
5Main parts are fabricated with high-strength alloy steel providing high burst/collapse resistance.
Property Parameters
Specification,mm244.5 X 177.8mm/139.7mm339.7mm X 244.5mm
Rated Load,t160240
Sealing Capacity,MPa2525
Shearing Pressure of Pins in Cylinder,MPa7~87~8
Casing Wall Thickness,mm10.039.65
11.0510.92
11.9912.19
Casing Weight,Kg/m59.5254.5
64.7368
69.9485
Body Max O.D.,mm215308
Body Min I.D.,mm155220.5
Technical specifications:
Outer diameter: 25-508mm
Single length: 3-14m, fixed length as per client?s requirements
Standards: API SPEC 5CT, API SPEC 5B, API SPEC 5L
Slot sizes: 0.10, 0.15, 0.2, 0.25, 0.30-3mm, also achieved upon customer request
Open area up to 60%
Materials: low carbon, low carbon galvanized steel (LCG), steel treated with plastic spraying, stainless steel, steel (304)
End connection: plain beveled ends for butt welding or threaded
Packing: plain/bevel end with end caps, waterproof packing, bare packing, in bundle, nest packing, standard export packing
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port
Technical specifications:
Outer diameter: 60-508mm
Standards: API, SEPC, 5CT
Steel grades: H40, J55, K55, N80, L80, C90, C95, T95, P110, Q125
Connection: STC, LTC, BTC and premium connection
Inspection: SGS, BV
Certification: ISO 9001: 2000
Delivery time: after received deposit 10-60 days according to the quantity
Payment terms: T/T, 100% L/C at sight
Port of shipment: Shanghai port, Qingdao port etc.
Quality control:
Company has perfect quality assurance system, advanced testing equipment and high-qualified management team with control over series of activities such as contract signing, product research and development, productive process and test, product preservation and delivery.
All products will be made according to API and related international standard as per customers' requirements.
Casing quick-operating thread protector is one kind of manual device for protecting casing outside thread. The structure is simple, solid durable, reliable performance. Adopting for our casing quick-operating thread protectors could save time and cost.
Type
O.Dmm(inch)
Connection
Lengthmm(inch)
KHS 5
230(9-1/16)
BCSG,LCSG
125(4-15/16)
KHS 5-1/2
235(9-1/4)
BCSG,LCSG
125(4-15/16)
KHS 7
275(10-13/16)
BCSG,LCSG
125(4-15/16)
KHS 9-5/8
335(13-3/16)
BCSG,LCSG
145(5-45/64)
KHS 10-3/4
362(14-1/4)
BCSG,?CSG
115(4-9/16)
KHS 13-3/8
425(16-47/64)
BCSG,?CSG
115(4-9/16)
KHS 16
500(19-11/16)
BCSG,CSG
125(4-15/16)
KHS 18-5/8
565(22-1/4)
BCSG,CSG
125(4-15/16)
KHS 20
610(24)
BCSG,?LCSG
145(5-45/64)
