Bag magazine up to 500 bags;
Variable frequency drives on core components for smooth operation and long life spanl
Main frame structure is welded structure.
Detection system to check if the bag is correctly placed to avoid product spillage.
Programmable logic control (PLC) system
Powered by electric and pneumatic systems
Total control of the bags throughout the entire cycle
Minimal bag handling time against to high speed operation
Product Introduction
The en-masse conveyor has been widely used and promoted in the grain terminal, grain depot, oilseed crushing plant, flour mill plant, feed mill plant because the overall efficiency attributed to energy-saving and low consumption is becoming more and more evident in the horizontal transport of grain.
Characteristic Features
1). Bottom of the Chain conveyors, as well 3/4 of side walls, as well as input, intermediate and head output hoppers, are covered/lined with a AR steel liners, or polyurethane liners.
2). Chain conveyors are equipped with factory mounted high density polyethylene plastic flights and grain return cups.
3). Inspection and maintenance door on head are supplied.
4). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
Speed Control Relay of the boot drum and/or belt is supplied.
5). Delivery of chain conveyors should be in a form of preassembled head with electric motor and drive, factory assembled tail with tensioning system and factory assembled body sections, with factory preassembled heavy duty chain with flights.
6). Inspection and maintenance door on head are supplied.
10). All parts, as a head, a tail section and a body sections are proposed for erection on bolts and nuts.
Hanging Bearing set in the middle of conveyor, complete self-lubricating oil nylon
Professional welding fixtures ensure excellent welding precision.
Customized diameter and pitch
Characteristic Features
1). Bottom of the Chain conveyors, as well 3/4 of side walls, as well as input, intermediate and head output hoppers, are covered/lined with a AR steel liners, or polyurethane liners.
2). Chain conveyors are equipped with factory mounted high density polyethylene plastic flights and grain return cups.
3). Inspection and maintenance door on head are supplied.
4). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
Speed Control Relay of the boot drum and/or belt is supplied.
5). Delivery of chain conveyors should be in a form of preassembled head with electric motor and drive, factory assembled tail with tensioning system and factory assembled body sections, with factory preassembled heavy duty chain with flights.
6). Inspection and maintenance door on head are supplied.
10). All parts, as a head, a tail section and a body sections are proposed for erection on bolts and nuts.
Product Introduction
The enclosed belt conveyor has been widely used and promoted in the grain terminal, grain depot, oilseed crushing plant, flour mill plant, feed mill plant because the overall efficiency attributed to energy-saving and low consumption is becoming more and more evident in the horizontal transport of grain.
Characteristic Features
1). Enclosed belt conveyors are equipped with lined main inlet and outlet hopper at head with polyurethane liners.
2). Belts of conveyorlegs are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant).
3). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
4). Gravity take up-section or Screw take up-section are supplied at each enclosed belt conveyor.
5). Head and tail section are delivered totally assembled, as well body sections are totally assembled in the sections of b=3.0m
6). Belt Cleaning after head section are supplied, providing easy in-line cleaning of the belt, as well a grain spillage returning unit at tail section are included in a delivery.
7). Inspection and maintenance doors on head are supplied.
8). All parts, as head, boot and body section are proposed for erection on bolts and nuts..
1). Open belt conveyors are equipped with lined main inlet and outlet hopper at head with polyurethane liners.
2). Belts of conveyors are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant).
3). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
4). Gravity take up-section or Screw take up-section are supplied at each enclosed belt conveyor.
5). Head and tail section are delivered totally assembled, as well body sections are totally assembled in the sections of b=3.0m
6). Belt Cleaning after head section are supplied, providing easy in-line cleaning of the belt, as well a grain spillage returning unit at tail section are included in a delivery.
7). Inspection and maintenance doors on head are supplied.
8). All parts, as head, boot and body section are proposed for erection on bolts and nuts.
Service
JINGU technical center can help our client to finish feasibility study, environment impact assessment and safety assessment and also provides turnkey service with high efficiency.
JINGU has its own various processing equipment and takes strict control measures on product quality, which results in fast delivery within a short time. Besides, JINGU can guarantee completion and operation as scheduled with its strong service team for installation and aftersales service.
Characteristic Features
1). Air supported belt conveyors are equipped with lined main inlet and outlet hopper at head with polyurethane liners.
2). Belts of conveyor are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant).
3). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
4). Gravity take up-section or Screw take up-section are supplied at each enclosed belt conveyor.
5). Head and tail section are delivered totally assembled, as well body sections are totally assembled in the sections of b=3.0m
6). Belt Cleaning after head section are supplied, providing easy in-line cleaning of the belt, as well a grain spillage returning unit at tail section are included in a delivery.
7). Inspection and maintenance doors on head are supplied.
8). All parts, as head, boot and body section are proposed for erection on bolts and nuts.
1).Easy operation, reliable operation
2).less use of personnel and low labor intensity
3).Assistant loading truck operation
Characteristic Features
1). Complete inner area of elevator Head and Boot section, as well as input hoppers of the elevators, covered with AR steel liners, or polyurethane.
2). Elevators are equipped with high density polyethylene plastic cups.
3). Belts of elevator legs are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant).
4). Elevators are equipped with explosion pressure relief panels at the head section and with one pair of panels at each h=6.0m of trunk sections.
5). Cleaning slide gate at boot section is supplied, providing easy cleaning of elevator leg boot.
6). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets.
Speed Control Relay of the boot drum and/or belt is supplied.
7). Gravity take up-section or Screw take up-section are supplied at each elevator leg.
8). Head and boot section are delivered totally assembled, as well trunk sections are totally assembled in the sections of b=3.0m.
9). Inspection and maintenance doors on head and first trunk section of the elevator leg are supplied.
10). All parts, as head, boot and trunk section are proposed for erection on bolts and nuts.
1).Easy operation, reliable operation
2).less use of personnel and low labor intensity
3).High space utilization ratio for warehouse
1).Easy operation, reliable operation
2).less use of personnel and low labor intensity
3).High space utilization ratio for truck
Characteristic Features
1). Variable frequency drives on core components for smooth operation and long life span
2). Main frame structure is welded structure.
3). Programmable logic control (PLC) system
4). Powered by electric and pneumatic systems
5). Total control of the bags throughout the entire cycle
6). Minimal bag handling time against to high speed operation
7). Control mode convenient and flexible, match with different type products
8). Servo control, position accurately
9). Touch screen stores product types, simplify operation process
10). Control mode function includes automation control, detection, protection, alarm
