Air Supported Belt Conveyors

Aerobelt features and benefits Silent running minimal noise pollution Efficient enclosure for dust/security/contamination/spillage/weather Minimal degredation of materials due to no movement of transported products Steeper incline possible for most materials Higher speeds possible Cost saving in outdoor applications Reduced structural and civil costs Power consumption reduced Neat profile Minimised maintenance Protection of personel from moving parts Increased belt life Air generated from a low pressure centrifugal fan Air can be conditioned to suit the product Available in mild steel, 3cr 12, 304/316 ss and aliminium Suitable to convey most products Ease of erection 22 years of proven design, success and reliability Reduction in support tressles, unsupported span of 12 metres and up to 36 metres in certain applications After sales service, on site maintenance contract available Well suited for use as a reversable or a shuttle conveyor Ideal for conveying precious materials (security) The aerobelt is an 'air cushion belt conveyor'. In this system the belt is carried on a film of air. Air is blown into the plenum chamber through sections by a small fan. One fan is sufficient for over a hundred metres of belt conveyor. Metres

Product Introduction The enclosed belt conveyor has been widely used and promoted in the grain terminal, grain depot, oilseed crushing plant, flour mill plant, feed mill plant because the overall efficiency attributed to energy-saving and low consumption is becoming more and more evident in the horizontal transport of grain. Characteristic Features 1). Enclosed belt conveyors are equipped with lined main inlet and outlet hopper at head with polyurethane liners. 2). Belts of conveyorlegs are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant). 3). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets. 4). Gravity take up-section or Screw take up-section are supplied at each enclosed belt conveyor. 5). Head and tail section are delivered totally assembled, as well body sections are totally assembled in the sections of b=3.0m 6). Belt Cleaning after head section are supplied, providing easy in-line cleaning of the belt, as well a grain spillage returning unit at tail section are included in a delivery. 7). Inspection and maintenance doors on head are supplied. 8). All parts, as head, boot and body section are proposed for erection on bolts and nuts..

1). Open belt conveyors are equipped with lined main inlet and outlet hopper at head with polyurethane liners. 2). Belts of conveyors are SOF & SOR (Static, Oil & Fire resistant) & (Super Oil Resistant). 3). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets. 4). Gravity take up-section or Screw take up-section are supplied at each enclosed belt conveyor. 5). Head and tail section are delivered totally assembled, as well body sections are totally assembled in the sections of b=3.0m 6). Belt Cleaning after head section are supplied, providing easy in-line cleaning of the belt, as well a grain spillage returning unit at tail section are included in a delivery. 7). Inspection and maintenance doors on head are supplied. 8). All parts, as head, boot and body section are proposed for erection on bolts and nuts. Service JINGU technical center can help our client to finish feasibility study, environment impact assessment and safety assessment and also provides turnkey service with high efficiency. JINGU has its own various processing equipment and takes strict control measures on product quality, which results in fast delivery within a short time. Besides, JINGU can guarantee completion and operation as scheduled with its strong service team for installation and aftersales service.

Product Introduction The en-masse conveyor has been widely used and promoted in the grain terminal, grain depot, oilseed crushing plant, flour mill plant, feed mill plant because the overall efficiency attributed to energy-saving and low consumption is becoming more and more evident in the horizontal transport of grain. Characteristic Features 1). Bottom of the Chain conveyors, as well 3/4 of side walls, as well as input, intermediate and head output hoppers, are covered/lined with a AR steel liners, or polyurethane liners. 2). Chain conveyors are equipped with factory mounted high density polyethylene plastic flights and grain return cups. 3). Inspection and maintenance door on head are supplied. 4). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets. Speed Control Relay of the boot drum and/or belt is supplied. 5). Delivery of chain conveyors should be in a form of preassembled head with electric motor and drive, factory assembled tail with tensioning system and factory assembled body sections, with factory preassembled heavy duty chain with flights. 6). Inspection and maintenance door on head are supplied. 10). All parts, as a head, a tail section and a body sections are proposed for erection on bolts and nuts.

Hanging Bearing set in the middle of conveyor, complete self-lubricating oil nylon Professional welding fixtures ensure excellent welding precision. Customized diameter and pitch

Characteristic Features 1). Bottom of the Chain conveyors, as well 3/4 of side walls, as well as input, intermediate and head output hoppers, are covered/lined with a AR steel liners, or polyurethane liners. 2). Chain conveyors are equipped with factory mounted high density polyethylene plastic flights and grain return cups. 3). Inspection and maintenance door on head are supplied. 4). A complete high quality set of El. motor (as Siemens or similar) with drive (reducer as SEW, or similar) is supplied along mounting frames and substructures, with safety guard and mounting brackets. Speed Control Relay of the boot drum and/or belt is supplied. 5). Delivery of chain conveyors should be in a form of preassembled head with electric motor and drive, factory assembled tail with tensioning system and factory assembled body sections, with factory preassembled heavy duty chain with flights. 6). Inspection and maintenance door on head are supplied. 10). All parts, as a head, a tail section and a body sections are proposed for erection on bolts and nuts.

1).Easy operation, reliable operation 2).less use of personnel and low labor intensity 3).Assistant loading truck operation