Material : Waterproof
Rotor : Bronze
0 Ring : Viton
Stator : Poly propylene
Hardness : 30degree-90degree
Style : Sealing Strip
Owing to our proficiency in this domain, we are providing our clients an optimum range of Bearing Isolator.
Product Details:
d d1 d2 L L1
18 30 33 12.5 6
20 32 35 12.5 6.5
22 32 35 12.5 6.5
25 35 38 12.5 6.5
28 40 43 12.5 6.5
30 40 43 12.5 6.5
32 47 45 12.5 6.5
35 47 50 12.5 6.5
40 52 55 12.5 6.5
45 60 63 15.5 8
50 65 68 15.5 8
Head - Upto 48 mtr
Motor Phase - Single Phase
Discharge Outlet Size - 25 to 50 mm
Fliud Temperature Range - upto 110 Degree Celsius
Capacity - Up to 75 m3 / hr
Suction Head - Up to 5 mtr
Max Solid Hand Size - Up to 25mm
Material - Cl, Bronze, CS, SS-304, SS-316/316L, Alloy-20
Temperature - Up to 110 dig C
We are one of the most well-distinguished companies in the market that are into offering Sewage Monoblock Pump.
Application:
Dewatering, mud, marine, effluent, hotel, loading & transfer of oils, spirits, swimming pools, gas oil, engine cooling.
Vessles, industrial-pumping petroleum products, chemical Civil construction-dewatering foundations, trenches and pits.
Filters press fedding, ETP,STP, Water for marine engines and shovels.
We are one of the most well-distinguished companies in the market that are into offering Sewage Monoblock Pump.
Application:
Dewatering, mud, marine, effluent, hotel, loading & transfer of oils, spirits, swimming pools, gas oil, engine cooling.
Vessles, industrial-pumping petroleum products, chemical Civil construction-dewatering foundations, trenches and pits.
Filters press fedding, ETP,STP, Water for marine engines and shovels
Motor Phase - Single Phase
Maximum Discharge Flow - Less than 100 LPM
Fliud Temperature Range - Upto 65-70 Degree Celsius
Head - Upto 25 mtr
Flow Upto - 18 m3 / hr
MOC - PP, UHMWPE, PDVF
We take pleasure in introducing ourselves as leading firm by offering Polypropylene Monoblock Pump.
Application:
Water Treatment Plant, Effluent Treatment Plant, Transfer And Loading f Unloading like Fld, Sulphuric Acid, Caustic Liquid Scrubbing Of Corrosive Gasses Like Nh3, Cot, So2, L2, F2, Br2 Etc.
Filter Press For Dyes & Chemicals.
Ciculation Of Chemicals In Metal Risking Industry.
Head- Upto 60 mtr
Maximum Discharge Flow - Less than 100 LPM
Motor Phase - Single Phase
Flow Upto - 120 m3/hr
MOC - CI,CS,SS 316
Power Rating - Single Phase & Three
RPM - 2900 RPM
We are ranked on top by offering the best quality of Mono Block Pump, which is known for its remarkable finish and quality.
Application:
Cooling Tower, Water Supply For Demesne Use In Apartment, Hostels, Swimming Pools, Automobile, Service Station Power Plant, Railway line
Cooling method - Air Cooled
Head (Meter) - Up to 80
Capacity - Up to 180 m3/hr
Discharge size - 32 mm to 80 mm
Temperature - Up to 350 degree C
Pressure - Up to 8 kg/cm2
Speed - Up to 3500 rpm
MOC - Grey cast iron, Cast steel, Alloy cast steel
Applications:
Petrol chemical industries
Oil industries
Systhetic-fibre industries
Textile, dyeing, printing industrie
Plastic and rubber industries
Paper making industries
Timber preocessing industries
Sugar industries
Food industries
Construction industries
Head - Up to 60 mtr
Temperature - Up to 60 degree C
Capacity - Up to 325 m3/hr
Discharge size - 25 mm to 125 mm
Pump length - Up to 4 mtr
Pressure - Up to 6 kg/cm2
Speed - Up to 3500 rpm
MOC - C.I. C.S., SS-304/304l, SS316/316L, Bronze, Alloy-20, CD4MCU, Hast alloy B and C etc
Applications:
The "Globe" pump is suitable for handling thin, clean of slightly contaminated liquids, such as water cooling water, effluent, cleaning products, chemicals and hydrocarbons sulphuric acid application, acid transfer aquariums, chemical processing chloralkali, general processing industry, light slurries, organic chemicals, polymers, petrochemical processing, slurries, solvents
Waste processing
Max Flow Rate Up to 50 m3 / hr
Head - Up to 45 mtr
Temp - Up to 65-70 dig C
MOC - PP, UHMWPE
RPM - 1440-2880
Type - Mechanical Seal / Gland Type
Our company has created a niche in the field of offering Centrifugal Polypropylene Pump.
Application:
Water Treatment Plant, Effluent Treatment Plant, Transfer And Loading I Unkaing like HcL Sulphuric Add, Caustic Liquid Scrubbing Of Corrosive Gasses like Nh3, Cot, Sot, 1.2, F2, &2 Etc.
Eller Press For Oyes & Chemicals. Circtiation Of Chemicals In Metal Finishing Industry.
Max Flow Rate Up to 110 m3/hr
Head - Up to 70 mtr
Model - GSSP Series
Temp - Up to 110 dig C
MOC - CI/ CI/SS, SS-304, SS-316, SS-316L
RPM - 1440 RPM
Type - Mechanical Seal / Gland Type
In order to keep pace with never ending demands of the customers, our company is instrumental in offering Horizontal Side Suction Pump.
Application:
Filtter press feedng, Dyes & Intermediates, Slurry transfer Cake transfer, ETP Plant.
Sugar & Food Industries
Head - Up to 140 mtr
Max Flow - Rate Up to 4000 m3/hr
Temperature - Up to 140 degree C
Pressure - Up to 16 bar
Applications:
Pulp and Paper industries
Chemical and process industries
Paim oil mills and refineries
Waster water treatment
Suger mill
In the pulp industry for conveying
Chemical pulp
Mechanical pulp
Caustic, lye
Fibrous sludge
Food industry
Sweage water treatment
Flanges - As per ISO 7005 & ANSI-B-16.5 PN16
Material - CI, CS, SS-304, SS-316
Max Capacity - Up to 400 m3/hr Max
Head - Up to 150 mtr
Pressure - Up to 16 bar
Temp - Up to 200 dig C
Impeller - Closed/Semi open
Owing to our in-depth knowledge in this domain, we are specialized in providing Chimical Process Pump.
Application:
The chemical process pump "GCP" is widely used for chemical, Pelicchernical ildustries.
Media which can be easily pumped are Acids, Caustic, Amonia, Phoshate, Dyes, Oils, Solvents, Alcohol, Aromatics etc.
Also suitable for Textile, Food, Paper & Pulp. Pharmaceuticals etc.
Head - Up,to,65,mtr
Max Flow Rate Up,to,300,m3,/,hr
Model - GXP,Series
Temp - Max,80,dig,C
MOC - PP,UHMWPE
RPM - 1440-2900
Type - Mechanical,Steel/Gland,Type
In order to keep pace with never ending demands of the customers, our company is instrumental in offering GXP Polypropylene Pump.
Application:
Water Treatment Plant, Effluent Treatment Plant, Transfer And Loading I Unkaing like HcL Sulphuric Add, Caustic Liquid Scrubbing Of Corrosive Gasses like Nh3, Cot, Sot, 1.2, F2, &2 Etc.
Eller Press For Oyes & Chemicals.
Circtiation Of Chemicals In Metal Finishing Industry.
Head - Up,to,50,mtr
Model - GVPP,Series
Temp - Upto,70,Degree,Celsius
MOC - PP,UHMWPE
RPM - 1440,&,2880
Pressure - 5,kg/cm2
Catering to the requirements of our clients, we are involved in offering Vertical Polypropylene Pump
Application:
Treatment plant, oloctro plating & steel rolling mills, laming, unloading like HCL, Su!pixie add I Alkali, Caustic lipid Scrubbing of corrosive gasses like C12, MHZ BRZ Mc.
Ideal for circulation of chemical in metalfinshing industry
Max Flow Rate Up to 200 m3 /hr
Model - GGP Series
Head - Up to 120 mtr
Temp -Up to 250 dig C
MOC - CI, CI/SS, SS-304, SS316/316L
RPM - 1440 RPM
Type - Mechanical Seal/Gland Type
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Rotary Gear Pump.
Application:
To Deliver verierty of light and viscous liquid such as Oil, fats, Coal tar. Paints, Molasses Highly viscous materials and liquids paints, Ammonia, Glycerin, Grease etc.
Head - Up to 35 mtrs
Capacity - Up to 75 m3/hr
Suction head - Up to 7.5 mtrs
Viscosity - Up to 100 mm2/sec
Max solid hand size - Up to 25 mm
Applications:
Dewatering swamp
Trenchs and basements
Effiuent treatment plants
Swimming pools
Marine application
Transfer for petrol, Diesel, Kerosene, Sprits, Gasoils etc
Head - Up to 250 mtr
Flow - Up to 20 m3/hr
Temp - Up to 105 degree C
MOC - CI, CB, Bronze, CI/SS
Applications:
Boiler feed
Marine
Fuel oil
Power plant
Industrial clean water condensafe water
Multi storied building water supply
Valves
Design - API 600, BS 1414
Application - Oil and Gas, Refinery, Petrochemical, Pharmaceutical, Chemicals, Steel sectors, Power, Textile
Face to face - ASME B16.10
Flanges - ASME B16.5 from 2" to 24" BW to asme B16.25
Testing - API 598
Model - 2VEE8
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlet and outlet. The vent/test connection is positioned on the front side.The drain bonnet is positioned on the right hand side and the isolating bonnet on the left hand side
Model - 5VEE9
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlets and outlets. The vent/test port are positioned on the bottom and top of the body. The isolating bonnets are positioned on the left and right hand side and the venting and equalizing bonnets are positionded on the front side. Specially designed for remote mounting to field meters, defferential transmitters and chart recorders on gas service allowing fail safe configuration preventing pressure loss from the high to low pressure impulse lines.
Material - Stainless Steel
Model - NVEE
Design pressure - 6000 psi
Max temp - 240 degree C
Type needle valves with hard seat are disigned for use on applications requiring complete isolation or throttling of the media. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Available with end connections in sizes from 1/8" to 1" and a wide choice in connections of female screwd, male screwed, male to female screwed or socket weld.
Applications:
High pressure line shut of
Instrument isolation
Drain valve
Liquid and vapor service
Technical Data:
All dimensions are in mm
Stem Press fitted hard chrome plated
Grand packing PTFE
Stem packing are Burnished for smooth valve operation
Safety feature Back seating for preventing stem blowout
Optional:
NVEE 10: High pressure valves for 10000 psi pressure
Nvee 20: High pressure valves for 20000 psi pressure
Specifications:
Site Type Length
A Handle
D Handle OD
E
1/8" FxF 50 40 10
MxF 55 40 10
MxM 60 40 10
1/4" FxF 55 40 10
MxF 65 40 10
MxM 60 40 10
3/8" FxF 55 40 10
MxF 65 40 10
MxM 65 40 10
1/2" FxF 65 50 12
MxF 75 50 12
MxM 70 50 12
3/4" FxF 70 50 12
MxF 75 50 12
MxM 80 50 12
1" FxF 90 70 12
MxF 105 70 12
MxM 105 70 12
Model - 2VEE6
Process side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded horizontal port inlet on the from side and flange outlet on the back side, test connection on the body. The isolating bonnet are positioned on the left and right hand side the equalizing bonnet is positioned on the top.
Model - 3VEE8
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlet and outlets. The isolating bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the front. This manifold is specially designed as miniature valve to be remote mounted
Process side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded horizontal port inlet on the from side and flange outlet on the back side. Two test connection positioned on the left and right side of the body. Two test connections positioned on the left and right hand side of the body. The isolating bonnet are positioned on the left and right hnad side and the equalizing bonnet is positioned on the top.
Model - 5VEE6
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With flange horizontal port inlets and flange port outlets. The vent/test port are positioned on the bottom side. The isolating and venting bonnets are positioned on the left and right hand side and the venting and equalizing bonnets is positionded on the top side. Designed for direct mounting.
Handwheel Nut - Steel
Handwheel - SG Iron / Steel
Identification Plate - Aluminium (anodised)
Yoke Sleeve - ASTM AS82 Type 416
Wedge Disc - ASTM A217 Gr. CAI 5
Body Seat Ring - ASTM A276 Type 410
Body - ASTM A105
Applications - Refinery, Petrochemical, Pharmaceutical, Steel Sectors,Textile
Class - 800
We have carved a niche amongst the most dominant names in this domain, instrumental in providing an excellent quality range of Forge Steel Gate Valve.
Material of Constructions:
Bonnet: ASTM A105
Stem: ASTM A479 type 410
Wedge disc: ASTM A217 Gr. CA15
Stem packing: Graphite moulded rings with braided top/bottom rings
Gasket: Spiral-wound SS type 304 with graphite filler
Cap screws: ASTM A193 Gr. B7
Gland bush: ASTM A276 type 410
Gland flange: ASTM A105
Gland stud/nut: ASTM A276 type 410/ASTM A194 Gr. 2H
Identification plate: Aluminium (anodised)
Size - 15mm to 50mm
Application - Oil And Gas, Refinery, Petrochemical, Steel Sectors,Power,
Spring - SS 302
Gasket - Spiral wound SS type 304 with graphite filler
Class - 800
Cap Screws - ASTM A193 Gr. B7
Identification Plate Aluminium (anodised)
Face to Face - AWE B 16.10
Testing Std. - API S98
Mfg. Std. - AP1602, BS 5352
Body - ASTM A105, in-situ stellited seat
Cover - ASTM A105
Piston Disc - ASTM A276 Type3 04
Efficient name in the industry involved in offering the optimum quality of Forge Steel Check Valve.
Applications - Oil and Gas, Refinery, Petrochemical, Pharmaceutical, Chemicals, Steel sectors, Power, Textile
Design - BS 1873, ASME B16.34, wall thickness to api 600
Face to face - ASME B16.10
Flanges - ASME B16.5, BW ENDS to ASME B16.25
Testing - API 598
Rating - ASME B16.34
Application - Oil & Gas, Reginery, Petrochemical, Pharmaceutical, Chemicals
Body - A216WCC
Stem - AISI 316
Stem Seal - PTEE + CG(S)
Packing - PTFE (T)
Oring Stem - Viton
General Features:
Design as per BS5351, ANSI B16.34
Pressure testing according, API 598
Face to face as per ANSI B16.10
Flanged RF, RTJ-ANSI 16.5
Body Liner - NITRILE EPDM. WON, PTFE
Disc SG Nat 13% Cr, 55 304, 55 316
Application - Oil And Gas, Refinery, Petrochemical, Steel Sectors, Power,
Testing -API 598
Body - C.I. WCB, CF8, CFBM etc.
Ends - Wafer Type
Operation - Lever & Gear
* We are presenting an excellent quality assortment of Hand Lever Operated Butterfly Valves.
Model - 2VEE7
Process side - 1/2" NPT male
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlet and female outlet. The vent/test connection is positioned on the front side. The venting bonnet is positioned on the right hand side and the isolating bonnet on the left hand side.
Model - 3VEE9
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
With threaded vertical port inlet and outlets, both test connections are positioned on the left and right hand side. The two isolating bonnets are positioned on the left and right hand side and the equalizing bonnet is positioned on the front and two drain plug provided on both side at instrument side.
Model - 5VEE8
Process side - 1/2" NPT female
Instrument side - 1/2" BSP rotatable nuts
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
Series for differential pressure gauges with 2 inlets NPT female at bottom and 2 outlets with rotating nuts on top side
Model - BBVEE
Material - Stainless Steel
Design pressure - 6000psi
Max temp - 240 degree C
BBVEE type gauge valve is a block and bleed needle pattern gauge valve with specially designed integral bleed of M8. Ideal for use on applications requiring bleeding or venting of media. Self centering needle non-rotating, on the valve seat. The conical metal tip press fitted ensures perfect alignment for positive bubble tight shut-off. Standard end connections are male inlet and female outlet or female inlet and female outlet from 1/4" to 3/4".
Applications:
Installtion of instrument and gauge
Isolation of instrument
Venting of instrument
Liquid and vapor service
Specifications:
Steam Tip press fitted hard chrome plated
Gland packing PTFE
Stem packing are Burnished for smooth valve operation
Safety feature Back seating for preventing stem blowout
All dimensions are in mm
Material - SS 316
Model No. - BVEE
Inlet Size - 1/4"NPT (F) to 2"NPT (F)
Instrumentation Ball Valve one piece ball stem ensures alignment of stem and orifice it reduce potential leak points does not require system pressure to seal is easily cleaned and purged available in square and round body.
Application - Oil & Gas, Reginery, Petrochemical, Pharmaceutical, Chemicals
Design - BS 1868, ASME B16.34
Face to Face - ASME B16.10
Flanges - ASME B16.5 For 2 inch To 24 inch
Testing - API 598
Rating Asme - B16.34
Material - Cast iron
Velocity Type - Zero Velocity Non Slamming Characteristics
Sizes - From 2" To 80" Diameter.
Seated Type - Soft Seated and Metal to Metal Seated
Application - Refinery, Petrochemical, Steel Sectors,Textile
With vast industrial experience, we are involved in offering a wide range of Industrial Valve.
Size
Inches
(ON) Ao mm
Bo mm
C mm
010
LuglRg
mm
D2o
Wafer
mm
Eo P.C.0
mm
N
do mm
2 " (50) 50 60 60 152.4 105 120.6 4 19
3" (80) 76 90 73 190.5 134 152.4 4 19
4" (100) 100 114 73 228.6 172 190.5 8 19
5" (125) 125 135 83 254 196 215.9 8 22
6" (150) 150 168 98 279.4 222 241.3 8 22
8" (200) 200 215 127 342.9 279 298.4 8 22
10" (250) 250 265 146 406.4 340 362 12 25
12" (300) 300 315 181 482.6 409 431.8 12 25
14" (350 350 365 184 533.4 450 476.2 12 29
Model - 2VEE9
Process side - 1/2" NPT female
Instrument side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
* With threaded horizontal port inlet, outlet and vent/test connection on the left hand side. The venting bonnet is positioned the top and the isolating bonnet on the front
Model - 5VEE7
Process side - 1/2" NPT female
Vent test - 1/4" NPT female
Maximum working pressure - 6000psi
Five valve manifold special series to accommodate any half DIN 19213 interface complaint pressure transmitter. 2 inlets NPT female at front and 2 outlets flange at back side DIN 19213. Vent/test connection at front, equalizing bonnets at top side, isolating bonnets at left and right side-venting bonnet at top
Expert Engineering Enhanced Air
Finned Cooler is unique in design. In which the Process Liquid flows from the
pot (as the direction shown in the fig. Expert Engineering Air Cooler) and the
cooling Finned Tubes and inserted in the pot, which cools the Process Liquid when it comes in contact with Tube
Cooling Finned Tubes.
The tubes are consists of sealed Stainless Steel tubes with Copper/Aluminium fins around it. It is filled with a liquid (the thermal transfer medium) appropriate to temperature of application.
Working Principle of Finned
Tubes It is filled with a liquid (the thermal transfer medium) appropriate to
temperature of application. The working fluid evaporates extracting
heat from the process liquid Vapor moves towards fin side of the tube
wherein it dissipates heat to the ambient and condenses.
The condensed liquid comes back to the bottom portion.
The cycle repeats,
BENEFITS OF AIR COOLER
Reliability:
Direct saving
Cost of Water: With Air Fin Coolers no water is required hence cost of water is saved.
To get desired amount of cooling normally for water-cooled heat exchangers 40 to 50
lpm water is required. @ Rs 5 per cubic meter approximate saving will be about Rs.
110000/- per year.
Cost of circulation of water: The energy spent in water circulation in is saved. On an average about 0.5kW of power is required for recirculation of water in each cooling circuit. @ Rs 4.5 per kw the power cost would be Rs.19710/-
Preventive Maintenance: Water causes scaling problem, and due to scaling, temperature to the seal goes up, the pump needs to be taken for removal of scale. Cost of removal of scale and loss of production is saved with Air Fin Coolers. Cost of each shut down is between Rs. 50,000/- to Rs. 1, 50,000/- (depends on criticality and cost of the product.)
Shut down Maintenance: If seal fails because of poor cooling in addition to the
production and maintenance loss, cost of replacement seal components add to the loss.
The cost incurred varies between Rs. 75,000/- to Rs. 5, 00,000/- depending on the seal size and spares consumed.
Indirect saving
Fouling: In absence of water, no scaling can take place. Because of scaling heat transfer gets reduced, hence either water consumption goes up or temperature in seal area goes up which reduces the seal life.
Better circulation of flushing fluid: In absence of coil, friction loss reduces hence there is better circulation of flushing liquid. The seal will be more comfortable with increased amount of flushing liquid, as there is no friction
Average Power -0 0.5kw
Cooler Type - Chillers, Desert, Evaporator, Tower
Temperature - 40 Degree C
Expert Engineering Air Finned Cooler is unique in design. In which the Process liquid flows from the pot (as the direction shown in the fig. Expert engineering air cooler) and the cooling finned tubes and inserted in the pot, which cools the process liquid when it comes in contact with tube.
Cooling Finned Tubes:
* The tubes are consists of sealed stainless steel tubes with copper/aluminium fins around it
* It is filled with a liquid (the thermal transfer medium) appropriate to temperature of applications
Working Principle of Finned Tubes:
* It is filled with a liquid (the thermal transfer medium) appropriate to temperature of applications
* The working fluid evaporates extracting heat from the process liquid
Vapor moves towards fin side of the tube wherein it dissipates heat to the
ambient and condenses
* The condensed liquid comes back to the bottom condenses
* The cycle repeats
Reliability:
* Any equipment which depends on the reliability of other equipment is not reliable or less reliable
* Expert engineering's air finned cooler cools the product with natural draft
It does not have any moving parts, needs no external power source
Expert Engineering's air finned cooler does not depend on the cooling water there for risk of shut down due to poor quality/quantity of water is eliminated
Direct saving:
* Cost of Water: With Air Fin Coolers no water is required hence cost of water is saved.
* To get de sired amount of cooling normally for water-cooled heat exchange rs 40 to 50 lpm water is required. @ Rs 5 per cubic meter approxi mate saving will be about Rs. 110000/- pe r year.
* Cost of circulation of water: The energy spent in water circulation in is saved
On an average about 0.5kw of power is required for recirculation of water in each cooling circuit. @ Rs 4.5 per kw the power cost would be Rs 19710/-
* Preventive Miantenance: Water causes scaling problem, and due to scaling, temperature to the seal goes up, the pump needs to be taken for romoval of scale
* Cost of removal of scale and loss of production is saved with air fin coolers
Cost of each shut down is between Rs. 50000/- to Rs 150000/-(depends of criticality and cost of the product)
* Shut Down Maintenance: If seal fails because of poor cooling in addition to the Production and maintenance loss, cost fo replacement seal components add to the loss
* The cost incurred varies between Rs. 75000/- to Rs. 500000/- depending on the seal size and spares consumed
Applications : Pulp and paper, Petrochemical and Regfinery, Heat transfer fluids
Shaft Diameter : 1.0 inch - 4.0 inch
Presure : 20 bar (max)
Temperature : -50dig C - +350dig C
Velocity : 20 m/sec
Face Materials Silicon Carbide, Tungstem carbide
Matal Parts : SS316, SS304, Hast-C, Carpenter 42
Material - Alloy-C-276
Application - Low-temp refinery services, Acid, Cautics
Shaft Diameter - D1: 18-100
Presure - Upto 2MPa/20 bar (g) Max
Speed - Upto 4500fpm/23 m/s
Elastomers - FKM (Optional FFKM, PTFE)
Temperature : -40 dig C - 176 dig C
Other Details:
d1 d4 Lb L2+
18 32 27.5 15.5
20 33.4 27.5 15.5
22 36 27.5 15.5
24 38.1 30 15.5
25 39 30 15.5
28 42 32.5 15.5
30 44 32.5 15.5
32 46 32.5 15.5
33 47 32.5 15.5
35 49.2 32.5 16.5
38 52.4 34 16.5
40 55.6 34 16.5
43 58.7 34 16.5
45 58.7 34 16.5
48 61.9 34 16.5
50 65.1 34,5 16.5
53 68.3 34.5 16.5
55 71 34.5 16.5
60 74.6 39.5 16.5
65 84.1 39.5 16.5
70 87.3 45 16.5
75 95.3 45 16.5
80 98.4 44.5 16.5
Material - Alloy-C-276
Application - Refinery Applictions for low as well high Temperature, Oil and Gas Industry, Petrochemical industry
Shaft Diameter - 20.0-110.0
Presure - Upto 2MPa/20 bar (g) Max
Speed - Upto 9800fpm/50 m/s
Elastomers : Flexible Graphite
Temperature : -40 dig C - +400 dig C
Other Details:
d d1 d2 d3 d4 L1+ L2+ L3+
20.0 25.0 47.0 51.0 48.0 38.0 17.0 31.0
24.0 29.0 50.0 54.0 51.0 38.0 17.0 31.0
28.0 32.0 53.0 57.0 54.0 38.0 17.0 31.0
31.0 36.0 57.0 61.0 58.0 38.0 17.0 31.0
33.0 39.0 60.0 65.0 61.0 41.0 20.0 31.0
35.0 42.0 63.0 68.0 64.0 41.0 20.0 31.0
39.0 45.0 68.0 71.0 67.0 41.0 20.0 31.0
42.0 48.0 69.0 74.0 70.0 41.0 20.0 31.0
45.0 51.0 72.0 77.0 73.0 41.0 20.0 31.0
47.0 54.0 75.0 81.0 77.0 43.0 22.0 31.0
50.0 58.0 79.0 84.0 80.0 43.0 22.0 31.0
Applications - Water And Waste Water, Food And Beverages Industry, 0 Oil Applications, General Chemicals
Face Materials Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Metal Parts - SS 316, SS 304, Hast-C, Monet, Alloy-20
Secondary Seals - NBR, Viton, PTFE, EPDM, Neoprene
Velocity - V 20 m/sec.
Pressure - P 35 bar(max)
Temperature : -60 Degree C to +200 Degree C
Efficient name in the industry involved in offering the optimum quality of Multi Spring Seals Balanced.
Application : Petrochemical, Chemical Industry, Oil Application, Petroleum refinery
Shaft Diameter : 0.625 - 4 inch
Pressure : 25 bar(max)
Velocity : 20 m/sec
Face Material : Silicon, Carbon,Ceramic
Metal Parts : NBR,Viton
Temperature : 70-200 Degree C
Being a customer oriented organization; we are deeply engaged in offering a wide array of Single Coil Spring Balance Seal.
Other Details:
Size di d d3 d4 d6 d7 L Ll
0.625 15.87 12.7 27 29 -- -- 40 --
0.75 19.05 15.87 31 32.5 -- -- 43 --
0.875 22.22 19.05 33.8 35.6 -- -- 43 --
1 25.4 22.22 37 38.8 35.2 41.4 35 11.1
1.125 28.58 25.4 40 43 38.4 44.6 49 11.1
1.25 31.75 28.58 43.5 46.2 41.5 47.7 51 11.1
1.375 34.92 28.58 50 52.5 44.7 50.9 51 11.1
1.5 38.1 31.75 52.8 55.7 47.9 54.1 59 11.1
1.625 41.28 34.92 57.8 60.4 54.3 60.4 59 12.7
1.75 44.45 38.1 59 62.2 57.4 63.6 66 12.7
Velocity : V 20 m/sec.
Pressure : 12 bar(max)
Temperature : -70 dig C to +200 dig C
Secondary Seals : Viton, PTFE, EPDM, Neoprene, Nitrite, Aflas
Metal Parts : SS 316, SS 304, Hast-C
Applications : Petrochemicals, Chemical industry, Oil applications, Petroleum refinery, Light hydrcarbons
Face Material : Carbon, Silicon Carbide, Caramic, Tungsten Carbide
Matching up with the requirements of our clients, we are involved in offering Single Spring Unbalanced.
Pressure : P 12bar(max)
Temperature : -50 Degree C to +200 Degree C
Velocity : V 20 m/sec.
Secondary Seals : Viton, PTFE, EPDM, Neoprene, Nitrite, Atlas
Metal Parts SS 316, SS 304, Nast
Face Materials Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Shaft diameter : 20mm-120 mm
Application : Slurry application, Petroleum refinery, General chemicals, Fertilizers
Owing to the rich industrial experience and expertise in this business, we are involved in providing Spring Seals Unbalanced Lug.
Shaft diameter : 14mm - 100mm
Velocity : V 20 m/sec.
Temperature : -50 dig C to +220 dig C
Pressure : P 25bar(max)
Metal Parts SS 316, SS 304, Hast-C, Duplex
Face Materials Carbon, Silicon Carbide, Special Cast Crmo Steel
Application : Water & Waste Water, Chemical Industry, Oil Application, Lube Oils, Low Solid Content Media, M
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Wave Spring Seals Unbalanced.
Metal Parts SS 316, SS 304
Velocity V 10m/s
Pressure P 16 bar(max)
Temperature -20 dig C to +140 dig C
Shaft diameter : 10mm-100 mm
Elastomers : NBR, Viton, EPDM
Applications : Water & Waste Water, Chemical Industry, Sulfide Slurries
Being a quality oriented organization, we are involved in providing a supreme quality range of Rubber Bellow Seals.
Application : Heat Transfer Fluid,Pulp And Paper
Shaft Diameter : 1 - 4mm
Pressure : 20 bar (max)
Velocity : 20 m/Sec
Face Material : Silicon Carbide,Carbon,Ceramic
Wellded Bellow : AM 350,Hast-c
Temperature : 50-350 degree C
With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing premium quality gamut of High Temperature Bellow Seal.
Other Details:
We also offer high temperature metal bellow seal with unique designs to handle corrosive and abrasive media. Application of quality raw material such as carbon, PDFE, TC and carbide. Metal bellow seal is used in areas such aspetrochemicals, sugar, paper & pulp industries
Usage : Industrial,garage
Shaft Diameter : 10 - 80 mm
Pressure : 10 bar (max)
Velocity : 15 m/sec
Face Material : Carbon,Silicon Carbide,CRMO Cast Steel
Elastomers : NBR,Viton,EPDM
Temperature : 20-140 degree C
With our years of experience & in depth knowledge in this field, we are engaged in offering a quality-assured array of Mechanical Conical Spring Seal
Shaft Diameter : 0.750, 4.000
Face Material : GFT, Silicon Carbide
Pressure : 10 Bar (max)
Temperature : 40 to 120 Degree Celsius
Velocity : 20 m/s
Metal Parts : SS 316, SS 304, Hast-C
Elastomers : PTFE, GFT
We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of PTFE Bellow Seal.
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : TC, Sic/Ceramic, Sic
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
We are presenting an excellent quality assortment of Cartridge Seal.
Applications : Clear And Lubricating Media
Elastomers : NBR, Viton, EPDM, FFKM, Karlez, PTFE, Aflas
Metal Parts : SS 316, SS 304, Hast-C Et Alloy 20
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Velocity : 20m/s
Pressure : Vacuum 30 bar(max)
Temperature : -40 dig C to +280 dig C
Shaft diameter : 20mm-100 mm
Details:
Double acting
Bidiretional
Balanced
Application : Utility Pumps, Transfer pump
Shaft Diameter : 2 -8 inch
Pressure : Vacuum 13 bar (max)
Speed : 3500 rpm
Face Material : Carbon, Silicon, Carbide, Ceramic
Temperature : Amb 135 dig C
Being a well-established organization, we are engaged in offering a distinguished range of Split Seal
Shaft Dia : 25 to 100mm
Metal Components SS-316 Operating Limits
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Seal Faces : Carbon Vs Ceramic/Sic./TC
Temperature : -50 to 150 Degree C
Pressure : Up to 1.40 MPa
Backed by our expert and experienced professionals, we provide Agitator Seal
Pressure : 40 Bar (max)
Shaft Diameter : 1.000, 4.000 mm
Temperature : -40 Degree C + 260 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Details:
Double acting
Reverse Balanced
Inside Mounted
Indeendent of direction of rotation
Application:
Petroleum refinery
Oil applications
Chemical Industry
Petrochemicals
Light hydrocarbons
Face Materials:
Carbon v/s Silicon Carbide, (Tungsten Carbide Optional)
Other Details:
Size : As per buyer requirement
Material - Stainless Steel & Rubber
Feature - Corrosion Resistant
Application- Water, Muddy Application etc.
Seal Face Stationery : Ceramic, Silicon Carbide, Carbon, Tungsten Carbide etc. Rotary : Carbon, Tungsten Carbi
Temperature - 20 to 200 Deg C
Pressure - Upto 10 Bar
* Our company has gained the immense clientele support by offering them the best quality range of Pump Spare Parts.
Face Materials - Carbon/ Silicon Carbide
Metal Parts - SS 304, Aluminium, Brass
Secondary Seals - Elastomers
Application - Oil, Water, Steam, Air, Coolant
Pressure - 10bar
Temperature - 120dig C
Size Range - 3/8 inch to 2.0 inch
Speed Upto:
750 rpm: For straight threads 2.0" size
2500 rmp: For straight threads 1.0" size
3000 rmp: For straight threads 1 1/2" & 1 1/4" size
3500 rmp: For straight threads 3/4" size & below
Pressure - P: 40 bar(max)
Application - Petroleum refinery, Chemical industry
Material - SS316
Shaft Diameter - D: 1000-4000"
Speed - Upto 4500fpm /23 m/s
Elastomers - FKM (Optional FFKM, BUNA, EPR)
The Expert Engineering has developed API (American Petroleum Institute) 682 seals for the oil and gas industry market. The Expert Engineering Type A pusher seal is available in Arrangement 1, 2 and 3. An Arrange- ment 1 seal is a single contacting wet cartridge seal with a Throttle bush. Arrangement 2 cartridge seal is the same configuration as the Arrangement 3 seal but is an un-pressurized dual seal where the barrier fluid pressure is kept lower than the seal chamber fluid pressure. The outboard seal will provide back up of hazardous fluids in case of Inboard Seal failure. Expert Engineering has designed, manufactured and tested to meet API 682 requirement, Type A pusher seal in Arrangement 1 and Arrangement 3 (dual pressurized cartridge seal) for the market. In an Arrangement 3 design the barrier fluid pressure is kept higher than the seal chamber pressure and is designed to handle and contain hazardous and light hydrocarbon fluids. The Inboard seal is specially designed to handle reverse pressure. Outboard Seal is same as Arrangement Seal. With many years of experience in seal design, manufacturing and testing for the industrial market, Expert Engineering has the experience to solve your sealing problems. Expert Engi-neering provides optimum sealing solutions to meet customer needs.
Velocity : 20 m/sec.
Pressure : 30bar(max)
Temperature : -50 digC to +220 dig C
Shaft diameter : 18mm - 100 mm
Metal Parts : SS 316, SS 304, Hast-C, Monet, Alloy-20
Secondary Seals : NBR, Viton, PTFE, EPDM, Neoprene
Face Materials : Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Applications : Water waste water & hot water, Chemical industry, Oil Applications, Food industry, Pulp & Paper, Bo
We are one of the most reliable companies in this domain and are into offering Wave Spring Seals Balanced.
Temperature : -20 Degree C to +140 Degree C
Metal Parts : SS 316, SS 304
Face Materials Carbon, Silicon Carbide, Tungsten Carbide, Ceramic
Shaft diameter : 10mm-75 mm
Pressure : P 16 bar(max)
Velocity : V 10m/s
Elastomers : NBR, Viton, EPDM, Neoprene
Efficient name in the industry involved in offering the optimum quality of Rubber Bellow Seals.
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Metal Parts : SS 316, SS 304
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Velocity : V 20m/s
Temperature : -25 dig C to +250 dig C
Pressure : P 15 bar(max)
Shaft Diameter : 20mm -100mm
We bring forth vast industrial experience and expertise in this business, involved in offering a high-quality range of Cartridge Seals Single Arrangement.
Details:
Single acting
Bidirectional
Unbalanced
Additional Information:
Item Code: CSAEE
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Metal Parts : SS 316, SS 304, Hast-C Et Alloy 20
Elastomers : NBR, Viton, EPDM, FFKM, Karlez, PTFE, Aflas
Velocity : 26m/s
Temperature : -40 dig C to +280 dig C
Pressure : Vacuum 16 bar(max)
Shaft diameter : 20mm-100.0mm
Applications : Petrochemicals, General chemicals, Refinery
Details:
Double acting
Bidiretional
Unbalanced
Operated Pressurized barrier fluid
Additional Information:
Item Code: CBBEE
Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : Sic, Sic/Ceramic, TC
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : Up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal
Face Materials :Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Metal Parts : SS 316, SS 304, Hast-C, Alloy 20, Monel
Pressure : Vacuum 8 bar(max)
Speed : 120.0 rpm
Temperature : Amb to +250 dig C
Shaft diameter : 25mm-150mm
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Pressur : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 1.000, 4.000 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Other Details:
Size - As per buyer requirement
Introduction:
Mechanical Seals generate heat and require lubrication while face sealing. Different API
Plans are used to dissipate this generated heat and cool the seal faces thus extending the seal life.
Flushing is required to cool and lubricate the seal. Controlling Flush Fluid Temperature is critical to the life of a mechanical seal. Cooling of the product also may be needed to improve the margin to vapour formation, to meet secondary sealing element temperature limits, to reduce coking or polymerizing, or to improve lubricity (as in hot water).
Disadvantage:
The basic disadvantages with water-based heat exchangers are the formation of scale around the tube due to fouling. Fouling can be very costly in refinery and petrochemical plants since it increases fuel usage, results in interrupted operation and production losses, and increases maintenance costs
Solution:
It has been often recommended to use the Air Cooler to get rid of the above problem but the size and the cooling efficiency of the so far developed air cooler had put them on the back foot and are rarely used for the cooling of the mechanical seals.
.
Expert Engineering has developed a new Enhanced Air Finned Cooler for such difficult applications, where no water is used. The compact size with natural draft cooling maintains the requirement of the cooling.
Mechanical Seals
Instrumentation Fittings
Capacity - 7.5 litre
Design Pressure - 10 bar
Level Gauge - To indicate barrier fluid
Manual Feed- Pump 2 ltrs (optional)
Hydraulic Test Pressure - 15 bar
Working Temprature - 180 dig C
Thermosyphon Shell Material Carbon Steel,SS 316,SS 304
Cooling Coil material - SS 316,SS 304
Heat Transfer Area Of Cooling Coil - 0.266m2
Cooling Water Flow Rate Recommended - 10 litre/min
Secondary Seals - Elastomers
Pressure Guage - 0-10, 0-25, 0-40 bar
* This is used for double mechanical seals in tandem or back to back arrangement to provide necessary lubrication and cooling to the seal faces to achive recommended seat life and comes equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming from seat to thermosyphon.
Connection Specifications:
Cooling water inlet: 1/2" NPT(F)
Cooling water outlet: 1/2" NPT(F)
Barrier fluid inlet: 1/2" NPT(F)
Barrier fluid outlet: 1/2" NPT(F)
Pressure guage connection: 3/8" NPT(F)
Filling connection: 1/2" NPT(F)
Nitrogen purging connection: 1/2" NPT(F)
Feed pump connection: 1/4" NPT(F)
Drain: 1/2" NPT(F)
Elastomers : NBR, Viton, EPDM, FFKM
Metal Parts : SS 316, SS 304, Hast-C, Duplex
Face Materials Silicon Carbide,Tungsten Carbide, Carbon, Ceramic
Velocity : V 20 m/sec.
Shaft diameter : 18mm-100 mm
Temperature : -50 dig C to +220 dig C
Pressure : P 50bar(max)
Application : Water, waste water & hot water, Chemical Industry, Oil Applications, Food industry, Pulp & Paper
We have gained a remarkable position in the market that is involved in offering Wave Spring Seals Balanced.
Shaft Dia : 25 to 100mm
Pressure : Up to 1.40 MPa
Speed : Up to 1 m/s
Metal Components SS-316
Seal Faces : Carbon Vs Ceramic/Sic./TC
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Temperature : -50 to 150 Degree C
Being a quality oriented organization, we are involved in providing a supreme quality range of Dry Running Seal.
Face Materials Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Metal Parts SS 316, SS 304, Hast-C, Alloy 20
Elastomers NBR, Viton, EPDM, FFKM, PTFE
Speed 320.0 rpm
Shaft diameter 25mm-150mm
Pressure Vacuum 8 bar(max)
Temperature Amb to +250 dig C
Applications : Corrosive application, General light chemicals, Food products
In order to keep pace with never ending demands of the customers, our company is instrumental in offering Single Agitator Seals.
Metal Parts : SS 316, SS 304, Hast-C, Alloy 20
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Temperature : Amb To +250 dig C
Pressure : Vacuum 35 bar(max)
Applications : General chemicals Et its vapours, Light hydrocarbons Et its vapours
Shaft Diameter : 25 - 150mm
Speed : 600 rpm
Due to our enormous understanding and massive knowledge of this business, we are involved in offering Double Agitator Seals.
Product Details:
Shaft d
Seal size d1 Inch d3 d4 Nxd7 d8 L L10
25 1.625 75 152 4xM10 132 240 280
30 1.875 80 158 4xM10 136 240 280
35 2 85 163 4xM10 140 240 280
40 2.25 90 168 4xM10 147 250 290
45 2.5 95 177 4xM10 158 250 290
50 2.625 100 177 4xM10 158 250 290
55 2.875 105 200 6xM12 178 282 322
60 3.125 110 205 6xM12 182 282 322
65 3.375 115 212 6xM12 187 282 322
70 3.5 120 217 6xM12 192 288 328
75 3.75 125 222 6xM12 197 288 328
Metal Components - SS-316 / SS-304
Secondary Seals - Viton / PTFE /GFT
Seal Faces -Ceramic,Sic,Carbon Vs. Ceramic RB Sic,TC
Shaft Dia - 25 to 150mm
Pressure - Up to 15 Bars
Speed - Up to 25 m/s
We are a unique name in this industry to provide our prestigious clients an exclusive range of Stationary Mounted Dual Seal.
Shaft Diameter : 1.000, 4000
Pressure : 40 Bar (max)
Temperature : 40 Degree C + 260 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Metal Parts ; SS 360
Details:
Double acting
Balanced
Inside Mounted
Indeendent of direction of rotation
Application:
Petroleum refinery
Oil applications
Chemical Industry
Petrochemicals
Light hydrocarbons
Face Materials:
Carbon v/s Silicon Cmarbide, (Tungsten Carbide Optional)
Other Details:
Size : As per buyer requirement
Pressure : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 18.0, 100.0 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Metal Parts : Alloy C-276
Application : Food and Beverage Industries,Viscous Media,Dye liquor applications, Moderate slurries
Pressure : 10 bar (max)
Velocity : 20 m/sec
Face Material : Silicon Carbide, Carbon, Ceramic
Temperature : 25 - 250 dig C
We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of Spring Out Of Product Balanced
Product Details:
Size : As per buyer requirement
Material : Steel
Application : Automobile Industry
Shaft Diameter : 10.0, 80.0 mm
Pressure : 10 Bar (max)
Temperature : 20 to 140 Degree Celsius
Metal Parts : SS 306, SS 304
Velocity : 15 m/s
Conical Spring Seals
Speed - 25 m/sec
Style - Mechanical Seal
Pressure - 40 bar (max)
With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of High Pressure Slurry Seal.
Other Details:
The high pressure slurry seals we offer are specially designed to handle highly corrosive and abrasive media. Such high pressure seal find its applications in petrochemicals, sugar, paper & pulp industries. Made from quality raw material it offers efficiency in various application areas.
Material - Steel
Use - As a barrier for materials in the pump and outside atmosphere
Pressure - Max 40 bar
Other Details:
The Compressor Seal complies with international quality standards.
The precision in construction helps in assuring zero leakage at the application area.
They are compatible with compressors of brand Accel, Alfa Laval, Batiboi, Bitzer, Carrier, Copland, Daikini, Grasso,
Ingerssoll Rand, Kirloskar, Mycom, Sabroe, Trane, Voltas, York, BOCK, MCQUAY, Gram and Vilter.
