Scaffolding Tube
Use: Scaffolding is a temporary structure used to support people and material in the construction or repair of buildings and other large structures. Material Storage Racks, Pallets, Hydraulic Platforms, Trusses, Columns, Purlins, Greenhouse, Stands Towers, Agricultural Equipment
Standard: BS 1139, BS1387-1985, EN 39, EN10219, JIS G 3444
Steel Grade: Q195, Q215, Q235, Q345, S235JR, S275JR, STK400, STK500
Outer Diameter: 27mm, 38mm, 42mm, 48.3mm-48.6mm,50.8mm,60.3mm,63.5mm,76mm,etc...
Wall Thickness: 2.0mm - 4.0mm
Length: 5.8m ,6m, 6.4m,6.5m , 0.3-18m
End: Square cut, Burr removed
Surface: Lightly oiled, Hot dip galvanized, Electro galvanized, Black
Packing: Plastic plugs in both ends, Wrapped in waterproof paper or PVC sleeve, and sackcloth with several steel strips
Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection.
Mill Test Certificate: EN 10204/3.1B
Coupler
Double Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.05 ? 1.48 KG
Swivel Coupler:
Type: British, American, Germany
Size: 48.3 x 48.3
Weight: 1.25 ? 1.75 KG
Standard: BS1139, EN 74
BS 1139
BS 1139 Standard
Chemical Composition:
% by mass, Maximum
C
Si
P
Ni
S
0.20
0.30
0.050
0.009
0.050
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
235
340 - 480
24%
BS 1137
BS 1137 Standard
Chemical Composition:
% by mass, Maximum
C
Si
Mn
P
S
0.20
-
1.20
0.045
0.045
Mechanical Properties:
Yield strength, min (MPa)
Tensil strength (MPa)
Elongation in 2 in., min. %
195
320-480
20%
Standard:
ASTM A500, ASTM A53, EN 10210 ,EN 10219 ,JIS G 3466 ,BS 1387, BS 6323 ,IS : 1161,IS : 3601,IS : 3074 IS : 4923, DIN 1626, DIN 2394.
Out Diameter:
10 *10mm – 500 * 500 mm
Wall Thickness:
0.5mm – 20mm
Length:
0.1 – 18 m as per customer’s request
Steel Grade:
GB: Q195, Q215, Q235, Q345
ASTM: GR A, GR B, GR C, GR D, DC01, DC03, 1008, 1010
JIS: SS330, SS440, SS490, SPHD, SPHE
EN BS: S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H
End:
Square cut, Burr removed
Surface: Lightly oiled, hot dip galvanized, Electro galvanized, Black
Heat Treatment:
Bright Annealed, Black Annealed
Packing:
Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips
Mill Test Certificate: EN 10204/3.1B
Specification
SSAW Steel Pipe
Process: Spiral Submerged- Arc Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas, and oil; construction and piling
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572 , JIS, IS,
Certificate: EN10217, EN10219, API 5L PSL1/ PSL2, API 5CT
Out Diameter: 219.1mm ?3048mm
Wall Thickness: 5.0mm-30mm
Length: Up to 70m
Steel Grade:
API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H
Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer?s requirement
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
ASTM A252 Piling Pipe
ASTM A252 Piling Pipe
STEEL GRADE
ASTM A252 GR 1, GR 2, GR 3
STEEL CHEMICAL COMPOSITION
The steel shall conform to the following requirements as to chemical composition:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
STEEL GRADE
Yield strength, min. psi (MPa)
Tensil strength, min. psi (MPa)
Elongation in 2 in., min. %
GRADE 1
30,000 (205)
50,000 (345)
30%
GRADE 2
35,000 (240)
60,000 (415)
25%
GRADE 3
45,000 (310)
66,000 (455)
20%
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
EN10219 Struture Pipe
EN10219 Struture Pipe
STEEL GRADE
EN10219 S235, S275, S355,etc
STEEL CHEMICAL COMPOSITION
STEEL GRADE
% by mass, Maximum
C
Si
Mn
P
S
N
S235JRH
0.17
-
1.40
0.040
0.040
0.009
S275JOH
0.20
-
1.50
0.035
0.035
0.009
S275J2H
0.20
-
1.50
0.030
0.030
-
S355JOH
0.22
0.55
1.60
0.035
0.035
0.009
S355J2H
0.22
0.55
1.60
0.030
0.030
-
S355K2H
0.22
0.55
1.60
0.030
0.030
-
MECHANICAL PROPERTIES
STEEL GRADE
Yield strength, min. psi (MPa)
Tensil strength, min. psi (MPa)
Elongation in 2 in., min. %
Minimum Impact energy KV J
at test temperature of
-20
0
20
S235JRH
235
360
24%
-
-
27
S275JOH
275
430
20%
-
27
-
S275J2H
355
510
20%
27
-
-
S355JOH
355
510
20%
-
27
-
S355J2H
355
510
20%
27
-
-
S355K2H
355
510
20%
40
-
-
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tensile Test, Dimension Check, NDT ,Impact Test
Specification
LSAW Steel Pipe
Longitudinal Submerged-Arc Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas, and oil.
Process:
LSAW - UO(UOE)?RB(RBE)?JCO(JCOE)
DSAW -Double Submerged arc welded
Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, GB/T3091, GB/T9711
Certificate: API 5L PSL1 / PSL2, API 5CT
Out Diameter: 355.6mm– 1626mm
Wall Thickness: 8 -50mm
Length: up to 12m
Steel Grade:
API 5L: GR B, X42,X46, X56, X60,X65,X70
ASTM A53: GR A, GR B, GR C
EN: S275, S275JR, S355JRH, S355J2H
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
API 5L Line Pipe
API 5L Line Pipe
STEEL GRADE
API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70
STEEL CHEMICAL COMPOSITION
STEEL GRADE
% by mass, Maximum
C
Si
Mn
P
S
GR B
0.26
0.40
1.20
0.030
0.030
X42
0.26
0.40
1.30
0.030
0.030
X46
0.26
0.40
1.40
0.030
0.030
X52
0.26
0.40
1.40
0.030
0.030
X56
0.26
0.40
1.40
0.030
0.030
X60
0.26
0.40
1.40
0.030
0.030
X65
0.26
0.40
1.45
0.030
0.030
X70
0.26
0.40
1.65
0.030
0.030
MECHANICAL PROPERTIES
STEEL GRADE
Yield strength, min. psi (MPa)
Tensil strength, min. psi (MPa)
Elongation in 2 in., min. %
GR B
245
415
X42
290
415
X46
320
435
X52
360
460
X56
390
490
X60
415
520
X65
450
535
X70
485
570
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test
Hydrostatic Test, Hardness Test.....
ASTM A53 Steel Pipe
ASTM A53 GR B Steel Pipe
STEEL CHEMICAL COMPOSITION
The steel shall conform to the following requirements as to chemical composition:
STEEL GRADE
Composition Max, %
C
Mn
P
S
Cu
Ni
Cr
Mo
V
GR B
0.30
1.20
0.05
0.05
0.40
0.40
0.40
0.15
0.08
MECHANICAL PROPERTIES
STEEL GRADE
Tensile Strength ,min, Psi ( MPA)
Yield Strength , min, psi, ( MPA)
GR B
60 000 (415)
350 000 (240)
Specification
Seamless Steel Pipe
Process: Seamless Steel Pipe (SMLS STEEL PIPE)
Standard: API 5L, API 5CT, ASTM A106/A53, ASTM A519, JIS G 3441, JIS G3444,
JIS G3445 DIN 2391, EN10305, EN10210, ASME SA106, SA192, SA210, SA213,
SA335, DIN17175, ASTM A179?
Certificate: API 5L PSL1 / PSL2, API 5CT, ISO 9001-2008
Out Diameter: 1/8 ? 36inch (10.3-914.4mm)
Wall Thickness: 1.73-40mm
Length: Random Length, Fixed Length, SRL, DRL
Steel Grade:
API 5L :API 5L: GR B, X42, X46, X56, X60, X65, X70
ASTM A53/A106: GR A, GR B, GR CASME SA106: GR.A, GR.B, GR.CASME
SA192:
SA192ASME SA209M: T1, T1a
ASTM A335:P1, P2, P5, P9, P11, P22, P23
ASTM A333:Gr.1, Gr.3, Gr.4, Gr.6, Gr.7, Gr.8, Gr.9, Gr.10, Gr.11
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
API 5L Line Pipe
API 5L Line Pipe
STEEL GRADE
API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70
STEEL CHEMICAL COMPOSITION
STEEL GRADE
% by mass, Maximum
C
Si
Mn
P
S
GR B
0.28
0.40
1.20
0.030
0.030
X42
0.28
0.40
1.30
0.030
0.030
X46
0.28
0.40
1.40
0.030
0.030
X52
0.28
0.40
1.40
0.030
0.030
X56
0.28
0.40
1.40
0.030
0.030
X60
0.28
0.40
1.40
0.030
0.030
X65
0.28
0.40
1.45
0.030
0.030
X70
0.28
0.40
1.65
0.030
0.030
MECHANICAL PROPERTIES
STEEL GRADE
Yield strength, min. psi (MPa)
Tensil strength, min. psi (MPa)
Elongation in 2 in., min. %
GR B
245
415
X42
290
415
X46
320
435
X52
360
460
X56
390
490
X60
415
520
X65
450
535
X70
485
570
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test
Hydrostatic Test, Hardness Test.....
ASTM A106 Steel Pipe
ASTM A106 Steel Pipe
Grade and Chemical Composition
Grade
C=
Mn
P=
S=
Si=
Cr=
Cu=
Mo=
Ni=
V=
A
0.25
0.27-0.93
0.035
0.035
0.10
0.40
0.40
0.15
0.40
0.08
B
0.30
0.29-1.06
0.035
0.035
0.10
0.40
0.40
0.15
0.40
0.08
C
0.35
0.29-1.06
0.035
0.035
0.10
0.40
0.40
0.15
0.40
0.08
Mechanical Properties:
Grade
Rm Mpa Tensile Strength
Mpa
Yield Point
Elongation
Delivery Condition
A
=330
=205
20
Annealed
B
=415
=240
20
Annealed
C
=485
=275
20
Annealed
ERW Steel Pipe
Electric Resistance Welded Steel Pipe
Usage: Used for low pressure liquid delivery, such as water, gas, and oil. Oil drilling and machinery manufacturing, etc.
Process:
ERW : Electric Resistance Welded pipe
HFI: High Frequency Induction weld pipe
EFW: Electric Fusion Welded Pipe
Standard: API 5L, API 5CT, ASTM 53, EN10217, DIN 2458. IS 3589, JIS G3452, BS1387
Certificate: API 5L PSL1/ PSL2, API 5CT
Out Diameter: 21.3mm -660mm
Wall Thickness: 1.5mm-22.2mm
Length: 0.3 – 18m
Steel Grade:
API 5L : GR B, X42,X46, X56, X60,X65,X70
ASTM A53: GR A, GR B, GR C
EN: S275, S275JR, S355JRH, S355J2H
GB: Q195, Q215, Q235, Q345, L175, L210, L245, L320, L360- L555
Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer’s requirement
Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test.
Mill Test Certificate: EN 10204/3.1B
Wall Thickness
API 5L Line Pipe
API 5L Line Pipe
STEEL GRADE
API 5L PSL1/PSL2 GR B , X42, X46, X52, X60, X65, X70
STEEL CHEMICAL COMPOSITION
STEEL GRADE
% by mass, Maximum
C
Si
Mn
P
S
GR B
0.26
0.40
1.20
0.030
0.030
X42
0.26
0.40
1.30
0.030
0.030
X46
0.26
0.40
1.40
0.030
0.030
X52
0.26
0.40
1.40
0.030
0.030
X56
0.26
0.40
1.40
0.030
0.030
X60
0.26
0.40
1.40
0.030
0.030
X65
0.26
0.40
1.45
0.030
0.030
X70
0.26
0.40
1.65
0.030
0.030
MECHANICAL PROPERTIES
STEEL GRADE
Yield strength, min. psi (MPa)
Tensil strength, min. psi (MPa)
Elongation in 2 in., min.%
GR B
245
415
X42
290
415
X46
320
435
X52
360
460
X56
390
490
X60
415
520
X65
450
535
X70
485
570
TEST REQUIRED
Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check
Bend Test , Flattenting Test, Impact Test, DWT Test, NDT Test
Hydrostatic Test, Hardness Test.....
ASTM A53 GR B Data Sheet
ASTM A53 GR B Data Sheet
STEEL CHEMICAL COMPOSITION
The steel shall conform to the following requirements as to chemical composition:
STEEL GRADE
Composition Max, %
C
Mn
P
S
Cu
Ni
Cr
Mo
V
GR B
0.30
1.20
0.05
0.05
0.40
0.40
0.40
0.15
0.08
MECHANICAL PROPERTIES
STEEL GRADE
Tensile Strength ,min, Psi ( MPA)
Yield Strength , min, psi, ( MPA)
GR B
60 000 (415)
350 000 (240)