Specification SSAW Steel Pipe Process: Spiral Submerged- Arc Welded Steel Pipe Usage: Used for low pressure liquid delivery, such as water, gas, and oil; construction and piling Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572 , JIS, IS, Certificate: EN10217, EN10219, API 5L PSL1/ PSL2, API 5CT Out Diameter: 219.1mm ?3048mm Wall Thickness: 5.0mm-30mm Length: Up to 70m Steel Grade: API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70 ASTM A252 GR 1, GR 2, GR 3 ASTM A53: GR A, GR B, GR C, GR D BS 4360: Grade 43, Grade 50 EN: S275, S275JR, S355JRH, S355J2H Surface: Fusion bond Epoxy coating, Coal Tar Epoxy, 3PE, Vanish Coating, Bitumen Coating, Black Oil coating as per customer?s requirement Test: Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test, X-ray Test. Mill Test Certificate: EN 10204/3.1B Wall Thickness ASTM A252 Piling Pipe ASTM A252 Piling Pipe STEEL GRADE ASTM A252 GR 1, GR 2, GR 3 STEEL CHEMICAL COMPOSITION The steel shall conform to the following requirements as to chemical composition: Phosphorus, maximum (%) : 0.050 MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % GRADE 1 30,000 (205) 50,000 (345) 30% GRADE 2 35,000 (240) 60,000 (415) 25% GRADE 3 45,000 (310) 66,000 (455) 20% TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tension Test, Dimension Check EN10219 Struture Pipe EN10219 Struture Pipe STEEL GRADE EN10219 S235, S275, S355,etc STEEL CHEMICAL COMPOSITION STEEL GRADE % by mass, Maximum C Si Mn P S N S235JRH 0.17 - 1.40 0.040 0.040 0.009 S275JOH 0.20 - 1.50 0.035 0.035 0.009 S275J2H 0.20 - 1.50 0.030 0.030 - S355JOH 0.22 0.55 1.60 0.035 0.035 0.009 S355J2H 0.22 0.55 1.60 0.030 0.030 - S355K2H 0.22 0.55 1.60 0.030 0.030 - MECHANICAL PROPERTIES STEEL GRADE Yield strength, min. psi (MPa) Tensil strength, min. psi (MPa) Elongation in 2 in., min. % Minimum Impact energy KV J at test temperature of -20 0 20 S235JRH 235 360 24% - - 27 S275JOH 275 430 20% - 27 - S275J2H 355 510 20% 27 - - S355JOH 355 510 20% - 27 - S355J2H 355 510 20% 27 - - S355K2H 355 510 20% 40 - - TEST REQUIRED Chemical Analysis, Mechanical Test, Visusal Inspection , Tensile Test, Dimension Check, NDT ,Impact Test