Size: 1/2" ~ 36"(DN15 ~ DN900)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon steel, Stainless steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic actuators
Applicable Standard
Design Standard: API 6D, ASME B16.34, API 608, BS 5351, MSS SP-72
Face to Face: API 6D, ASME B16.10, EN 558
End Connection: ASME B16.5, ASME B16.25
Inspection and Test: API 6D, API 598
Products Range
Size: 1/2" ~ 12" (DN15 ~ DN300)
Rating: ANSI 150lb, 300lb, 600lb
Body Materials: WCB,CF8,CF8M,CF3,CF3M,Duplex 4A,Alloy Steel,Monel,etc
Ball&Stem: A105+ENP, F304, F316,F304L,F316L,F51,Monel
Seat: PTFE,RPTFE,PEEK,PPL,etc
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic
Design Features
Full port or reduced port
Floating ball design
Blow out-proof stem
Casting body or Forged body
Fire safe design to API 607/ API 6FA
Anti-static to BS 5351
Cavity pressure self relief
Optional locking device
Applicable Standard
Design Standard: API6D
Fire Safe: API 607/BS6755
End Connection: ASME B16.5/ASME B16.25/ASME B16.11/ASME B1.20.1
Inspection and Test: API 6DSS, API 598
Products Range
Size: 1" ~ 10" (DN25 ~ DN250)
Rating: ANSI 150lb, 300lb, 600lb,900lb,1500lb,2500lb
Design Features
Two piece body design-minimize leakage paths.
Bi-directional
Bubble tight shutoff
floating ball principal with dynamic response seats featuring inherent self relife
Anti blowout stem
Integral compression ends availably eliminating taper threads and thread sealants
Low torque operation
Connector thread environmentally sealed
Anti static design as standard.
Firesafe designed to meet BS 6755 part2/API607(optional)
Applicable Standard
Design Standard: BS 1873, ASME B16.34, DIN3356
Face to Face: ASME B16.10, EN 558, DIN 3202
End Flange: ASME B16.5, DIN 2501
Buttwelding Ends: ASME B16.25, DIN3239
Inspection and Test: API 598, DIN3230
Products Range
Size: 2" ~ 24"(DN50 ~ DN600)
Rating: ANSI 150lb ~ 900lb
Body Materials: MONEL
Trim: monel trim
Operation: Handwheel, Gear, Electric, Pneumatic, Hydraulic
Design Features
Straight pattern body design
OS&Y, outside screw and yoke
Tapered, globe, or plug disc
Renewable or welded seat
Bolted bonnet, back seal structure
Impact handwheel for 10" and above
Extended stem design for low temperature
ISO top flange for Bare stem globe valve
Size: 1/2" ~ 12"(DN15 ~ DN300)
Rating: PN16~PN100
Body Materials: Carbon steel,Stainless Steel,Alloy steel
Temperature: Air&liquid â?¤300â??,steam:â?¤550â??,Acid gas:â?¤200â??
Design standard: DIN(GB),API526
Type: A42,A42,A47 full lift type ,low lift type
Connect type: Flange end,Thread end
Applicable Standard
Design Standard: API 609, MSS SP-67, MSS SP-68, BS 5155
Face to Face: API 609, ASME B16.10, BS 5155, EN1092
End Connection: ASME B16.5, ASME B16.47
Inspection and Test: API 598
Products Range
Size: 2" ~ 36" (DN50 ~ DN900)
Rating: ANSI 150lb ~ 600lb
Body Materials: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel.
Disc Sealing: PTFE, Graphite Laminated
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic
Design Features
Triple eccentric or double eccentric design
Metal to metal seated,soft seated
Bi-directional service
Frictionless closure
Blow-out proof shaft
Wafer, wafer-lug, double flange ends
ISO top flange
Size:1"~16"
Pressure:class 150~250lb,10000psi(70Mpa)
Material:Carbon steel,stainless steel,alloy steel
Construction:Balance cage
Design Standard:API6A,ASME B16.34
Connect Ends Standard:ASME B16.5,ASME B16.25,ASME B16.11,ASME B1.20.1
Test Standard:API598,ISO5208
Temp.:-46~121 C
Operator:Handle,Gear,Lever,Electric
Size: 1/2" ~ 24"(DN15 ~ DN600)
Rating: ANSI 150lb ~ 1500lb
Body Materials: LF2,LF5,LF9,LF3,F304,F316,F304L,F316L
Temperature: -29~-196 C
Design standard: BS6364,API600,ISO10434,API6D
Lip Seal is available as request
Size: 1/2" ~ 14"(DN15 ~ DN350)
Rating: ANSI 150lb ~ 300lb
Body Materials: carbon steel, Stainless Steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic
Applicable Standard
Design Standard: API 6D, ASME B16.34, BS 5351, API 608, MSS SP-72
Face to Face: ASME B16.10, API 6D, EN 558
End Flange: ASME B16.34, DIN 2501
Buttwelding Ends: ASME B16.25
Inspection and Test: API 598, API 6D
Products Range
Size: 2" ~ 48"(DN50 ~ DN750)
Rating: ANSI 150lb ~ 1500lb
Body Materials: Carbon steel, Stainless steel
Trim: A105+ENP, 13Cr, F304, F316
Operation: Lever, Gear, Electric, Pneumatic, Hydraulic actuators
Design Features
Full port or reduced port
Trunnion mounted ball
Blowout-proof stem
Double block & bleed
Emergency sealant injection
Cavity pressure self relief
Fire safe design to API 607 / API 6FA
Anti-static to BS 5351
Design Features
Flange
3-way
