Ball Valve--Trunnion Ball Valve

Trunnion ball valve 1. Design: api 6d, ansi b16.34 2. Face to face: api6d, b16.10 3. Flange end: ansi, b16.5 4. Size range: 2 - 36" 5. Pressure ratings: ansi 150, 300, 600, 900, 1500; 6. Body materials: wcb, a105, lf2, lcb, cf8, cf8m, cf3, cf3m etc. 7. Trim: 13cr, 304ss, 316ss, duplex stainless steel; 8. Full bore and reduced bore 9. Actuations: lever, worm gear; Exporting standards case

China bs standard ball valve: bs 5351 trunnion mounted ball valves, forged steel, alloy steel, f304, f316, f321, 150lb-2500lb, side entry, top entry. Features: Side entry/top entry. Two/three pieces design. Full & reduced bore. Anti-stactic device. Blow-out proof stem. Fire safe design.

Specialityvalve is a leading Trunnion ball valve manufacturer in India. Trunnion ball valves also technically termed as Quarter turn valve are used to kick off or stop the flow of media in a pipe. The ball of a trunnion ball valve attaches to the stem on one end and to a shaft called the trunnion on the other. The ball is attached to the trunnion hence it is beneficial since it maintains a proper seal on both sides and the stem is not subjected to additional torque. As a result, a trunnion ball valve can have better sealing and require less torque to turn for higher pressure applications. Our Trunnion ball valve is tough and reliable for any industrial use. Types of trunnion ball valve: Forged trunnion ball valve. Casting trunnion ball valve. Advantages of a trunnion ball valve: They are suitable for high or low pressure implementations. Lower operational cost. Industries that uses trunnion ball valves: Oil and gas industries. Petrochemical industry. Body material Carbon Steel (WCC, WCB, LCB, LCC,WC6, WC9), Stainless Steel [SS304, SS316L, SS904L, CF8, CF8M, F304, F316, F31L, F51, F3, F55, F91], Duplex, Super duplex Class 150 LB 2500 LB Size 2 48 Ends butt weld, socket weld, flanged Trunnion ball valve is available in a range of styles and sizes, depending on the needs of the consumer. Specialityvalve is a major manufacturer of high-quality products, and the key to our success in the valves industry is our well-integrated work climate. Our infrastructure is spread out over a large region, with plenty of space for development.

Trunnion Titanium ball valve Titanium ball valve Ball valve Manual Valve trunnion ball valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-32, DN10~DN800 Drive: Lever, Gear, Electric, Pneumatic actuator Design Feature: Resilient seal or Metal to metal seal Full bore or Reduce bore Fire safe design, Anti-static device, Blow-out proof stem, Double block and bleed function Grease injection for seat & stem Cavity pressure self-relief          Optional lockable device Anti-leakage design packing & packing box ISO 5211 mounting pad The surface form a protective film after Hard face treatment for trim. It not only improves anti-corrosion performance, but also can open and close easily because of improved surface hardness.

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option

Trunnion Mounted Ball Valve Trunnion mounted ball valve is used to industrial pipeline and long-distance transportation pipeline for various corrosive and non-corrosive medium, such as water, steam, oil, gas, liquefied Gas, natural gas, nitric acid, acetic acid, strong oxidizer, urea etc. According to different working conditions, there are two types of valve body structure choices: 2 pieces and 3 pieces split body . Specification: Size:2~56 Pressure Rating: Class150~2500LB Main Materials: WCB, LCC, LCB, WC6, 4A, CF8, CF8M, CF3, CF3M, CF8C, A105, F11, F22, F304, F316, F321 etc. Design and Manufacture: API 6D, API608, ASME B16.34 Face-to-Face:ASME B16.10, API 6D Anti-static: API 6D Ends Connection: Flange, Butt Welding Fire Proof: API 607, SIO 10497 Inspection & Testing: API 598, API 6D Operator: Manual, Worm Gear, Electric, Pneumatic, Manual-Air-Hydraulic. Feature: Double Block & Bleed Cavity Pressure Self Relief Optional Double Piston Design Emergency Sealant Injection Full Bore or Reduce Bore Blow-out Proof Stem

Name: Trunnion ball valve Model: ball valve Size: 2"--26" Pressure:150#--1500# Product Material: Carbon&Lowalloy steel/STL/Nickel bare alloy Infomation: Ball valves featuring with 2-PC or 3-PC split body, trunnion mounted ball. This type of valves has advantage of less weighted and cost effective. It is ideal for frequent on-off flow control in big size and high pressure pipeline. SHOV ball valves are fire safe test certified by TUV API607. Design Standard: Basic Design: API 6D Test: API 6D, BS 6755, API 607, API 6FA Size ranges 2¡±-26¡± RATING 150LB-1500LB MATERIAL Carbon Steel ,Stainless Steel Trim: A105+ENP, 13Cr, F304, F316 Design features: Full port or Reduce port Hard Facing Seat and Ball Metal Seated Design Cavity pressure self relief Blowout-proof stem Anti-static device Fire safe design Products range SIZE RANGES 2¡±-26¡± RATING 150-1500 Material Carbon Steel ,Stainless Steel Application: On shore oil & gas Off shore oil & gas Refinery.