The device is an Ultraviolet-only flame detector designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity. It detects in the ultraviolet (UV) spectral range for optimized speed of response.
It is fast and capable to detecting the ultraviolet (UV) rays emitted by a burning substance and is used in high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored.
The flame sensor adopts an ultraviolet photosensitive tube, with qualities of highly sensitive, reliable, dust-resistant, corrosion proof and moisture-resistant, therefore is not sensitive in sunlight, dust, oil, tolerance of fume, and humidity. Set in a standard calibration to detect a flames at a distance of 25 meters, which flame created by 2Kg ethanol in a Container of Base 33cmX33cm, Height 5cm.
1. General
HS-SG109 Sound Strobe of notification appliances offers a wide range of Sound/strobes, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 24 volt DC systems.
1. General
Conventional Fire Alarm Control Panel with four Zones
2. Specifications
Two Style B (Class B) Initiating Device Circuits (IDCs).
All zones accept two-wire smoke detectors and any normally-open contact devices.
One built-in Fire Fighting Ouput.
24-volt operation.
Resettable four-wire smoke detector power 500 mA.
Non-resettable power 500 mA.
One-man walk-test programmable for silent or audible test.
Disable/Enable control per IDC.
Reverse polarity protection.
3. Packaging and shipping
Conventional Fire Alarm Control Panel with four Zones
1 pc/carton box;carton M:43*17*51cm
Conventional fire fighting control panel with 4 zones and 3 sound output, designed to connect with 2/4 wired smoke detector, heat detector, manual call point, manual release, gas release lamp etc.
1. Specifications
a. Four Style B (Class B) Initiating Device Circuits (IDCs).
b. All zones accept two-wire smoke detectors and any normally-open contact devices.
c. One built-in Fire Fighting Ouput.
d. 24-volt operation.
e. Resettable four-wire smoke detector power @ 500 mA.
f. Non-resettable power @ 500 mA.
g. One-man walk-test programmable for silent or audible test.
h. Disable/Enable control per IDC.
i. Reverse polarity protection.
1. General
HS-JL188-6 Electric bell of notification appliances offers a wide range of Sound, for wall and ceiling applications, indoors and outdoors. They are designed to be used in 24 volt DC systems.
2. Specifications
Name
6" Alarm Bell
Item No.
HS-JL188-6
Operating voltage
DC24V
Alarm current
70mA @ DC24V
Alarm sound intensity
Minimum 95dB
Dimension
Diameter 155mm, height 45mm
Weight
650g
Features
Easy to install bracket
3. Features
Operating Voltage : DC24V
Alarm Current: Maximum 70 mA
Alarm Sound Intensity: Minimum 95dB
HS-SB106 Manual Call Point, Designed for Conventional Fire Alarm Systems and Security Alarm system for reporting fire or emergency condition by pressing its breakable glass. The manual call point can be test by a test key without breaking the glass.
2. Specifications
Name
6" Alarm Bell
Manual call point
Product category
2 wire, Compatible with all existing conventional fire alarm control panel
Item No.
HS-JL188-6
HS-SB106
Operating voltage
DC24V
DC24V
Alarm current
70mA @ DC24V
30mA @ DC24V
Alarm sound intensity
Minimum 95dB
N/A
Dimension
Diameter 155mm, height 45mm
88mm*88mm*52mm
Weight
650g
172g
Features
Easy to install bracket
Break glass
3. Features
a. Available for flush or surface mounting
b. Plastic film on glass
c. Test key inserted from side
d. Open circuit with series resistor
e. Suitable for the majority of conventional fire alarm systems
The mini 2 zone panel HS-CK1002 have Master panel and Slave panel. One Master panel can connect 31 Slave panel, and the Master panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
2. Specifications
Item No.
HS-CK1002
HS-CK1004
HS-CK1008
HS-CK1016
Zones
2
4
8
16
Sound output
1
1
2
4
AC power
220VAC/50Hz
220VAC/50Hz
220VAC/50Hz
220VAC/50Hz
Battery
Sealed lead-acid only
Total DC24V system power
3.0 amps
Max current per NAC
1.25amps
Max battery charging capability
18AH
Cabinet weight(net/gross)
3.5/4kg w/o battery
6.0/6.6kg w/o battery
6.0/6.6kg w/o battery
6.0/6.6kg w/o battery
3. Features
our Style B (Class B) Initiating Device Circuits (IDCs).
One Master Panel also has two zones, each zone can connect max.25 conventional detectors.
One slave Panel has two zones, each zone can connect max.25 conventional detectors.
The Mater panel could show the fire and fault of all slave panel. The slave panel can only show itself fire and fault.
HS-DG812 Battery Powered Photoelectric Smoke Alarm with excellent stability and high-sensitivity. Our standard battery is 6F22, lithium battery is optional.
Key Specifications/Special Features
Power Source: 9V Battery (included).
Audio Alarm: 85dB/3m
Temperature Range: 0 to 40
Humidity Range: 5%-95% relative humidity(RH)
Sensor: Photoelectric
Size: diameter 106mm in diameter x32mm depth
Interconnects: No
Easy to install with mounting base included
Suitable for any room
Low battery signal
Test button for simple testing
2 wire 9V-28VDC powered conbined Smoke detector and Heat Detector electronic conbined fire alarm HS-FT103
1pc/blister box(103*103*55mm,155g) ;60pcs/carton box
They work perfectly with all conventional intelligent fire control panels
Advanced MCU Expert Algorithm Software.
Easy installation and maintenance
Durable sensor head, no need for replacement
General
The manual call points provide a textured finger-hold area that includes Braille text.
In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to
operate the station, provided for non-English-speaking people.
HS-SB106 Manual Call Point, Designed for Fire Alarm Systems and Security Alarm system.
Key Specifications/Special Features
Available for flush or surface mounting
Plastic film on glass
Test key inserted from side
Open circuit with series resistor
Suitable for the majority of conventional fire alarm systems
