Customize forming wheels, used for gem forming machines
Input voltage: 220V
Motor power: 500W
Spindle speed: 40000 r / min
Overall dimensions: 60 * 70 * 150cm
Weight: 180kg
Function: Dongtai ultrasonic gem machine production of computer engraving machine using imported screw, die spindle motor, the machine in the use of the process, high precision, fast, not prone to failure. The machine is convenient for producing all kinds of precious stones products. Configuration of the standard knife, in the machine production process occurs when the knife, you can knife, the use of a high degree of uniform tool, two carving height of the same, the product will not have a break, complete the joint, to solve the difficulty of the product knife.
Voltageï¼?220V
output power ï¼?750W
speed of mainshaft ï¼?1400r/min
Function:This machine is mainly used for soft stone material of processing and polishing, such as amber, jade, green gold, etc.,
This machine is using a small flat, suitable ditch sieve plate for faster processing products and not easy deformation which has high yield, the product effect is good.
Main Parameter:
Model:DT405
Voltage:220v
Working frequency:15kHz-20kHz
Power:1800W
Carving size:â?¥12CM/â?¥18CM
Function:the ultrasonic gem machine operate easily for drilling. Featured as high drilling speed and low fault rate. Apply auto track frequency protection, the overload protection minimize the machine fault rate. The drilling head is changeable for gem carving. The drilling force is auto adjusted according to load condition.The available type as:1200W,1800W,4800W,etc.
The 1800w ultrasonic drilling machine with stable performance, its punching speed operation is simple with low failure rate, is a professional gem punching equipment with good processing effect.
The input voltage: 380 v / 220 v
Output power: 1.5 kw / 1.1 kw
The spindle speed: 1400 r/min
Installation dimensions: 92 * 50 * 92 cm
Function:this machine uses much higher chamfering barrels and its single motor with double barrel. Its processing quantity is much which saves electricity.
The machine uses high quality bearing, smooth operation, long service life.Apply to factory mass production.
-
Model:DT405
Voltage:220v
Working frequency:15kHz-20kHz
Power:1800W
Carving size: 12CM/ 18CM
Function:the ultrasonic gem machine operate easily for drilling. Featured as high drilling speed and low fault rate. Apply auto track frequency protection, the overload protection minimize the machine fault rate. The drilling head is changeable for gem carving. The drilling force is auto adjusted according to load condition.The available type as:1200W,1800W,4800W,etc.
The 1800w ultrasonic drilling machine with stable performance, its punching speed operation is simple with low failure rate, is a professional gem punching equipment with good processing effect.
Input voltage: 220v
Output power: 90w
Spindle speed: 40000r / min
Dimensions: 210 * 70 * 80mm
Weight: 5kg
Function: adjustable speed carving machine is a kind of electronic control speed engraving machine. The machine handle is strong and used common machine chuck, the replacement of different chucks, you can use different models and different rods of the tool needle which is easy to use and strong versatility. The machine speed can be used according to the stepless speed regulation, combined with the advantages of electronic gong machine and gong machine, to avoid the same gong machine with the same replacement of the hose, but also to avoid the electronic gong machine can only use small rod tool shortcomings.
Main parameters: voltage:380v/220v power:4kw/3kw Rotation speed:1450r/min Max. load cutting disc size:24inch(600mm) Dimension:1200*680*1080mm Weight:95kg Function:after improved,route rail being added to simplify the forward and backward process when cutting the gem materials.The fixed point cutting is supported, and also allow forward and back move for better cutting speed and cutting route distance. The stone fixed plate is added for more stable and safe production. It is suitable for cutting the stones within 50cm.
Main Parameter: Model:DT405 Voltage:220v Working frequency:15kHz-20kHz Power:1800W Carving size:12CM/18CM Function:the ultrasonic gem machine operate easily for drilling. Featured as high drilling speed and low fault rate. Apply auto track frequency protection, the overload protection minimize the machine fault rate. The drilling head is changeable for gem carving. The drilling force is auto adjusted according to load condition.The available type as:1200W,1800W,4800W,etc. The 1800w ultrasonic drilling machine with stable performance, its punching speed operation is simple with low failure rate, is a professional gem punching equipment with good processing effect.
Voltage: 220V
Output power: 1.5/2.2KW
Blade diameter: 150-300mm
Max. blade size: 12inch(300mm)
Dimension: 560*420*750
Function: the bilayer gem slicing machine adopt thicken plate, steady in operaton, low noise, large cutting scale, strong applicability, long cutting distance when slice on the layer, and the slicing process is completed for the whole platform, using extended card board for board cutting, not easy to produce deviation in slicing process.The second layer adopt the conventional cutting pattern, large distance of radius cutting, simple operation
Main parameters:
voltage:380v/220v
power:4kw/3kw
Rotation speed:1450r/min
Max. load cutting disc size:24inch(600mm)
Dimension:1200*680*1080mm
Weight:95kg
Function:after improved,route rail being added to simplify the forward and backward process when cutting the gem materials.The fixed point cutting is supported, and also allow forward and back move for better cutting speed and cutting route distance. The stone fixed plate is added for more stable and safe production. It is suitable for cutting the stones within 50cm.
Dimension:1200*680*1080mm
Weight:95kg
Main parameters:
Spindle speed:1400r/min
Dimension:840*540*1070mm
Weight:150kg
Function:the automatic single-tool seal gem cutting machine adapt high quality bearing and rail to provide high cutting accuracy and cutting speed.Apply automatic feeder and travel control switch for stable operation.The gem material is fixed on the platform and the travel switch distance is set,then the machine can auto stop after the cutting process is finished.
Features:
1.One personel can operate 5-6 machines
2.With the protective cover, more secure,low noise, non-pollution
3.Apply oil pump to cycle supply cutting oil,to lower the cost and consumables
4.Suitable for cutting the gem with width less than 40cm
5.The max. load blade size is 30inch(75cm)
Dimension:840*540*1070mm
Weight:150kg
Main parameters:
Voltage:AC220V
power:250w
Dimension:300*220*200mm
Weight:10kg
Function:the pearl drilling machine adapt high accuracy rail,with stable route and high processing speed. Suitable for pearl in shape of round,rice and special, and other material, such as wood and soft stone. It can drill pearl within 3-25mm by tungsten steel drill bit. The drilling depth is adjustable and it can drill double face at a time.
Dimension:300*220*200mm
Weight:10kg
Function:the ultrasonic gem cleaning machine run stably with effective cleaning. It can thoroughly clean up the dirt of the gem without harm the stone. Besides, it can also clean hardware product. There is several model with different power and volume for various customer requirements.
Main parameters:
Voltage:AC380V/220V
power:370w
Working frequency:60hz
Rotational speed:1800r/min
Dimension:720*400*1030mm
Weight:40kg
Function:apply high quality bearing as wearproof,high mechanical strength.It run smoothly with low noise and heat.The technique of carving, polishing,drilling,forming can fulfill through changing of tool head, clamp. The protection plate can be added for extra charge.
Dimension:720*400*1030mm
Weight:40kg
Voltage:380v
Power:3kw
Spindle speed:1400r/min
Max. Blade size:16inch(400mm)
Size:840*540*1070mm
Weight:150kg
Function:adopt dual power configuration, and high quality bearing for stable working and long term usage. Apply auto route cycle and only have to put the gem material on worktable. The sheet stock can be processing once, no need for secondary processing. One user can work with 4-6 machines. The end-product size 300mm*120mm*6-180mm is workable.The max. Blade size can reach 20inch.
Main parameters:
Voltage: 220V
Power: 1.5KW
Spindle speed:1400r/min
Max. cutting blade size:12inch(300mm)
Dimension: 600*550*850mm
Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
Voltage:380V
Power:3KW
Spindle speed:1400r/min
Max. blade size:16inch(400mm)
Size:840*540*1070mm
Weight:150KG
Function:It adopt dual power configuration and high quality bearing for stable working and long term usage. Apply auto route cycle and only have to put the gem material on worktable. The sheet stock can be processing once, no need for secondary processing. One user can work on 4-6 machines. The end-product size 300mm*120mm*6-180mm is workable.The Max. blade size can reach 20inch.
Main parameters:
Input voltage:AC380V/220V
Output power:370W
Working frequency:60Hz
Rotational speed:1800r/min
Dimension:720*400*1030mm
Weight:40kg
Function:apply high quality bearing as wearproof, high mechanical strength. It run smoothly with low noise and heat. The technique of carving, polishing, drilling, forming can fulfill through changing of tool head, clamp. The protection plate can be added for extra charge.
Voltage: 220v
Power: 250w
Working frequency: 60hz
Ratational speed: 1800r/min
Dimension:700*400*800mm
Weight: 35kg
Function: this machine uses copper manipulator which makes the machine precise and long lifetime with easy operation.
Apply high quality dynamo for smaller shake and better accuracy.
It could facet crystal, gem, semi-gem, glass, etc
Main parameters:
Voltage: 220V
Power: 1.5KW
Spindle speed:1400r/min
Max. cutting blade size:12inch(300mm)
Dimension: 600*550*850mm
Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
Voltage:220V
Function:it apply iron construction,lead screw and triaxial for stable performance and high precision processing.
The machine in stable structure, easy operation, strong commonality.Fine carving products, smooth operation, high stability.
Configuration:computer as 1set,two pumps,wrench as 1 set,1 set of computer,gallery(500pics)
500pics, each year the company's new picture for free to the customer, according to customer requirements can be customized for free with the other 30 pcs of picture.All year round to provide technical support.
Features:
1. With tool instrument, for better accuracy of secondary processing, more efficient.
2. The spindle speed up to 40000rpm, high processing speed, are less likely to wreck a utility kn.
3. better limit is imposed on schedule, make the machine run more secure.
4. Strengthened the stability of the whole machine, and better rail screw, higher precision and more durable.
5. With orbit screw lubricating oil system, provide more convenient maintaining of the lead screw.
Input voltage:380V
Motor power:5.5kW
Rotation speed:1400r/min
Dimension:3000*1600*1200mm
Max. blade size: 60inch(1500mm)
Weight: 95kg
Function: adopt traveling platform,flexible, using the standard motor, large cutting strength, smooth operation, the stone stay still when cutting, it's flexible shift position of the
machine for flexible cutting of the processed material.
Fixture cutting machine
Input voltage: 220V
Motor power: 1.5KW
Spindle speed: 1400 r / min
Maximum load cut piece size: 12 inches (300mm)
Overall dimensions: 60 * 50 * 85cm
This machine is a dual-purpose machine. Put the motherboard cover when ordinary cutting, the machine can be used when the spindle in the next small cutting machine, the ordinary stone cutting, when the need for Standard small piece, you can remove the motherboard, with the following fixture, sandwiched stone, with manual feed mode, shake the handwheel to move forward fixture for cutting, according to the actual use of the infeed, so out of the film Standard, and oil cutting machine has the same effect, to s zolve the small pieces are not allowed to the situation. This machine is convenient, practical and simple to use.
Voltage:220V
Power:370W
Working frequency:60Hz
Ratational speed: 1800r/min
Dimension:700*400*800mm
Weight: 35kg
Function: adopt brass machine hand with precise scale for easy operation. Apply high quality dynamo for smaller shake and better accuracy. It used to facet crystal, gem, semi-gem, glass, etc.
Voltage: 220V
Power: 1.5KW
Spindle speed:1400r/min
Max. cutting blade size:12inch(300mm)
Dimension: 600*550*850mm
Function: the automatic cutting machine, include function of gem cutting machine, auto oil cutting machine, for dual operation, when need for normal cutting, then set the board, it's applied as gem cutting machine with under spindle, for gemstone slice cutting, not need the board but take the spacer to hold the stone material, with auto cutting feed, and cutting feed function, to apply for actual situation, for better cutting effect similar to that of auto oil cutting machine, and solve the problem of slice production. The limit protection for automatic stop after cutting to the maximum limit, as safe operation. It's convenient, practical and simple.
The input voltage: 220 v
Output power: 750 w
The spindle speed: 1400 r/min
Function:This machine is mainly used for soft material processing and polishing, such as amber, jade, green gold, etc. and using a small flat, suitable ditch sieve plate which is make the process faster, not easy deformation and high yield, especially for gem can't polish.
Voltage:AC220V/380V
Power:750W
Blade:6/8inch
Function:the aluminum gem cutting machine adopt high quality aluminum surface, and using 8 inch blade, the 20mm,25mm inner bore blade can also be installed. It's convenient to use and durable which is suitable for precise cutting.
This polishing machine with drum shape, is more advantageous to polish and less prone to pop up the goods.
It is mainly used for miscellaneous stone of jade, crystal, agate, glass, artificial stone and other stone, shell, bone fossils grinding polishing, etc.
Need a carborundum, polishing powder, polishing wax, polishing materials to finish the process.
Input voltage 220V
Frequency 50Hz
Function:The high pressure spray gun adopt advanced technology,it has a long blow head and a short blow head that can exchange each other.It has strong removing the stain ability and stable performance which can remove the stain on the gems surface and the dirt inside the gems gap effectively.
Voltage:220V/380V
Power:1.1KW/1.5KW
Blade:6/8/10inch
Function:this cutting machine adopt down-stroke press slicing method which could save labor with high speed and better cutting effect and it's max. blade size is 12 inch.
The input voltage: 380 v
Output power: 3 kw
The spindle speed: 1400 r/min
Dimension: 1350 * 850 * 1550 mm
Weight: 180 kg
Function:The automatic round beads grinding machine uses the up and down grinding disc to grind beads which is easy to operate and the effect of grinding round pearl is good.Through regulating up and down grinding disc many times which can undertake grinding with high product yield and can grind hard and soft material.After a lot of improvement, machine run more smoothly with longer service life baeause of the precision machining spindle.
Main Parameters:
Input voltage:220V
Output power:750W
Working frequency:60Hz
Rotation speed:1400r/min
Dimension:720*450*780mm
Function:adapt thickened steel plate, and qualified PU protective circle for long term of usage. Apply high quality brush plated disc to accelerate the processing speed.The cube stone is processed for round bead processing. Suit for jade, crystal, agate, shell, etc.
Item No.:DT40101
Product:Power generator of punching
Specification:2500W
Remark:ultrasonic
Type:1500W/2500w/3600/4800w
Main Parameters:
Input voltage:220V
Output power:750W
Working frequency:60Hz
Rotation speed:1400r/min
Dimension:660*360*760mm
Weight:65kg
Function:it apply high precision milling wheel that can further process the bead that was on the wheel and with high precision. The process speed is high and the processed round bead is standard in shape. Suit for processing of crystal, agate, glass, shell, and other stones. Fit to process round bead within 4-50mm. According to different customer requirements, the milling wheel can plate emery to avoid impurity, especially for bone, wood, resin materials.
