Voltage:AC220V/380V
Power:750W
Blade:6/8inch
Function:the aluminum gem cutting machine adopt high quality aluminum surface, and using 8 inch blade, the 20mm,25mm inner bore blade can also be installed. It's convenient to use and durable which is suitable for precise cutting.
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile.
1 high precision sawing, no burr, no need for secondary processing, high efficiency.
2 only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece.
3 hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise.
4 the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5 press height and speed and saw cutting height and speed can be set according to material size and thickness.
6 the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade
7 additional Angle template can be cut Angle.
Model ZG-455SAL specifications
Sawing angle 90°&45°
Maximum sawing width 300mm
Maximum sawing height 140mm
Saw blade 3200R.P.M
Blade size Tungsten steel blade with blade tip
Ï?355-455Ã?Ï?25.4mm
Size of Table 650Ã?670Ã?860mm
Machine motor 5HP/2P three-phase
Pressure required 5-6kg/cm2
Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm
Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm
NW/GW 335/385kg
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk shell, MP3, U disk aluminum shell, aluminum shell type aluminum extrusion and precision cutting of different profile.
1ã?? high precision sawing, no burr, no need for secondary processing, high efficiency.
2ã?? only foot switch, automatic mechanical pressure and sawing. Safe and easy. Pressure parts using high quality rubber strip, not easy to damage the surface of the workpiece.
3ã?? hidden saw blade sawing from the bottom up, high safety, single or multiple materials sawing at the same time, small vibration, low noise.
4ã?? the pressure system is driven by two-way linear bearing and controlled by an independent air pressure cylinder, with high pressure stability (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5ã?? press height and speed and saw cutting height and speed can be set according to material size and thickness.
6ã?? the spindle runs at high speed, and equipped with automatic oil injection device, to provide the saw blade with proper lubrication, make the workpiece surface smoother without burr, extend the service life of the saw blade
7ã?? additional Angle template can be cut Angle.
Model ZG-455SAL specifications
Sawing angle 90°&45°
Maximum sawing width 300mm
Maximum sawing height 140mm
Saw blade 3200R.P.M
Blade size Tungsten steel blade with blade tip
Ï?355-455Ã?Ï?25.4mm
Size of Table 650Ã?670Ã?860mm
Machine motor 5HP/2P three-phase
Pressure required 5-6kg/cm2
Machine dimension ( LxWxH ) 1030Ã?860Ã?1360mm
Packing dimension ( LxWxH ) 1050Ã?880Ã?1380mm
NW/GW 335/385kg
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, especially suitable for copper and aluminum electronic components, radiator, audio panels, graphics CARDS, network CARDS, CPU, hard disk aluminum shell, MP3 shell, aluminum doors and Windows, picture frames, light boxes, screen, display equipment, line type lamp, aluminum furniture, aluminum extrusion and precision cutting of different profile
1 accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2 only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3 hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4 the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5 press height and speed and saw cutting height and speed can be set according to material size and thickness.
6 precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7 can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate
Specialized in cutting the PVC and aluminum profiles, used to make window and door frames.
After remove the clamping, fixed the saw blade to ideal position to be used as a table saw for woodworking.
Two clamping type for optional, block clamping type and new clamping type.
Vice revolving to the right and left from 0 to 45.
The machine is available without the machine base.
Carbide blade dia. 350-450mm is available as optional. The size can be designed asyou're your requirement.
Manual handle type or foot pedal type swivel base is available as optional to adjust on working direction from 0 to 90 degree.
Motor guard.
The aluminum profile cutting machine have two style: pedal style and manual handle brake style.
Model Number:
AC-350
Voltage:
220V/380V
Rated Power:
1.5/2.2kw
Dimension(L*W*H):
840x440x1600mm
Weight:
120kg
Warranty:
1 Year
After-sales Service Provided:
Overseas third-party support available
Primarily used for cutting industrial profile and aluminum alloy curtain wall and window profiles, also used for cutting plastic material. It utilizes hard alloy saw blade for external diameter is as big as 20", the linear speed is high, and the processing precision is high. The blade of the machine can be rotated between 90-degree and 45-degree. Can adopt digital display device, resulting in accurate positioning. So it is an ideal choice for cutting extra-thick industrial profile, aluminum doors and windows and curtain walls profiles.
Main technique parameter
1.Cutting length...........................80~2080/3080mm
2.Cutting width * height...................230*150mm
...................280*150mm
3.Main motor power.........................2.2kw
4.Main motor rotation speed................2850r/min
5.Saw blade dimension......................D500*d30*120t
6.Saw blade swing angle....................90~45 degree
7.Saw blade feeding speed..................0~3m/min
8.Saw blade retracting speed...............2~3m/min
9.Operation air pressure...................0.6~0.8mpa
10.Digital display meter length............2000/3000mm
11.Operation voltage.......................380v
12.Overall dimension (l*w*h)...............950*1500*1400mm
13.Weight..................................900kg
We have three models with different saw blade diameter: AC-350, AC-400, AC-450.
We introduce AC-450 in the following:
Condition:
New
Place of Origin:
Shandong, China (Mainland)
Brand Name:
TYK
Model Number:
AC-450
Voltage:
220V/380V
Rated Power:
2.2kw
Dimension(L*W*H):
900*480*1500mm
Weight:
136kg
Certification:
ISO9001
Warranty:
One Year
After-sales Service Provided:
Overseas third-party support available
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
â?¢ Advantages of AlNiCo Magnet:
1.Customized designs are available.
2.Max working temperature can be as high as 550�°C.
3.Disadvantage: Br and BH(max)are not as high as rare earth magnet.
4.High energies and relatively low coercivity.
5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include:
low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for
sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc.
Advantages of Ferrite Magnet:
Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
