This Korean made Closed Expansion Tank acts as a substitute of open expansion tank to prevent the corrosion of pipes. It guarantees smooth operation by completely intercepting the contact of pipe water in cooling, heating and hot water heating pipes with an air and filling proper pressure to receive and restore expansion water. This Korean made Expansion Tank is available in variety of sizes and capacities to fit your application.
[ FEATURES ]
PREVENT PIPE CORROSION
Ass contact with air is intercepted completely, air cannot get mixed with water so the span of pipes is prolonged as corrosion is prevented.
WATER SUPPLY UNNECCESSARY
No make-up water is needed as no pipe water is lost by evaporation or overflow.
COMPLETE AIR DISCHARGE FUNCTION
The air venting system of pipe is good its pressure is properly maintained.
LIMITELESS INSTALLAION APPLICATION
As it can be installed in every place including basements, roof tops and mid-stories, it is not frozen to burst and space can be utilized.
EXTENDED OPERATIONAL TEMPERATURE RANGE
Pressure needed for pipe system can be easily maintain, so operational temperature over 100â?? from medium or high temperature water system can be easily obtained.
GUARANTEED SMOOTH OPERATING PERFORMANCE
Effective operation is possible without problems of pipe circulation, pump efficiency, pipe noise and vibration caused by air mixture.
SANITARY SYSTEM OPERATION
Hot air heating system is sanitary because hot air is not opened to the air.
NO MAINTENANCE IS REQUIRED
No maintenance is needed and the lifespan of tank and membrane is semi-permanent, no heat loss exists and energy is saved. The lifespan of piping in life cycle cost.
[ SPECIFICATIONS ]
* Shell : Fabricated steel designed and constructed as per ASME Section VIII, Div. 1
* Bladder : Butyl Rubber
* Design Pressure : 125 psiG (862 kPa)
Options : 150 psiG (1034 kPa), 175 psiG (1206 kPa), 250 psiG (1723 kPa), 300 psiG (2068 kPa)
* Design Temperature : 240 (116 )
* Tank Volume : 40~5000 litters
FINETANK, the fine tank from Korea, the high quality WATER STORAGE TANKS made of SMC PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.).
FINETANK - GRP SECTIONAL WATER TANK complies to KSF 4811, KSM 3305, KSM-3401 (Korean Standard), BS 6920:2000 (British Standard), SS245:1995 (Singapore Standard)
FINETANK, the WRAS approved GRP SECTIONAL WATER TANK is being produced by the ISO-9001 certified Korean manufacturer.
[ ADVANTAGES ]
EXCELLENT HYGIENIC PROPERTISE
* Nontoxic, WRAS certified materials
* Suppression of algae and microorganisms with excellent blocking of sunlight
* Minimization of moss and scale by smooth surface finish
OUTSTANDING DURABILITY
* Optimal system by FEM (Finite Element Method) design.
* Anti-corrosion materials in SS316, HDG and PE coated S.S.
ABSOLUTE WATER TIGHTNESS
* Foam type gasket with excellent elasticity and resilience.
FREE CAPACITY DESIGN
* Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc)
* Versatile capacities (0.5m3 ~ 5,000m3).
* Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc.
EASY INSTALLATION & MAINTENANCE
* User-friendly installation even in the restricted area by using standardized panels and reinforcements.
PRE-INSULATED PANELS (optional)
* PU foam pre-insulated panels to avoid high heat or cold.
MUTI-COMPARTMENTS (optional)
* A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance.
[ SPECIFICATIONS ]
1 Panel : Hot-press molded SMC panel
2 Insulation : Poly Urethane Foam
3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional
(External reinforcement system ->No inner tie-rod system is available up tp 4mH)
4 Roof support : SMC pultrusion pipe
5 External reinforcement : Hot dip galvanized steel
6 Roof support : SMC pultrusion pipe
7 Inner bolts : Stainless steel 316 / 304
8 External bolts : HDG steel / Stainless steel / Rubber capped steel
10 External ladder : HDG steel
There're more options you're looking for.
For more details, please feel free to contact us !
FINETANK - GRP SECTIONAL WATER TANK - High quality WATER STORAGE TANKS made of GRP PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.)
FINETANK, the fine tank from the ISO-9001 certified Korean manufcaturer complies to international standards WRAS, BS, KS, SS.
[ ADVANTAGES ]
EXCELLENT HYGIENIC PROPERTISE
* Nontoxic, WRAS certified materials
* Suppression of algae and microorganisms with excellent blocking of sunlight
* Minimization of moss and scale by smooth surface finish
OUTSTANDING DURABILITY
* Optimal system by FEM (Finite Element Method) design.
* Anti-corrosion materials in SS316, HDG and PE coated S.S.
ABSOLUTE WATER TIGHTNESS
* Foam type gasket with excellent elasticity and resilience.
FREE CAPACITY DESIGN
* Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc)
* Versatile capacities (0.5m3 ~ 5,000m3).
* Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc.
EASY INSTALLATION & MAINTENANCE
* User-friendly installation even in the restricted area by using standardized panels and reinforcements.
PRE-INSULATED PANELS (optional)
* PU foam pre-insulated panels to avoid high heat or cold.
MULTI-COMPARTMENTS (optional)
* A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance.
[ SPECIFICATIONS ]
1 Panel : Hot-press molded SMC panel
2 Insulation : Poly Urethane Foam
3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional
(External reinforcement system ->No inner tie-rod system is available up tp 4mH)
4 Roof support : SMC pultrusion pipe
5 External reinforcement : Hot dip galvanized steel
6 Roof support : SMC pultrusion pipe
7 Inner bolts : Stainless steel 316 / 304
8 External bolts : HDG steel / Stainless steel / Rubber capped steel
10 External ladder : HDG steel
* INternational Certificats : WRAS, PSB, ISO-9001
There're more options you're looking for.
For more details, please feel free to contact us !
