This Korean made Closed Expansion Tank acts as a substitute of open expansion tank to prevent the corrosion of pipes. It guarantees smooth operation by completely intercepting the contact of pipe water in cooling, heating and hot water heating pipes with an air and filling proper pressure to receive and restore expansion water. This Korean made Expansion Tank is available in variety of sizes and capacities to fit your application.
[ FEATURES ]
PREVENT PIPE CORROSION
Ass contact with air is intercepted completely, air cannot get mixed with water so the span of pipes is prolonged as corrosion is prevented.
WATER SUPPLY UNNECCESSARY
No make-up water is needed as no pipe water is lost by evaporation or overflow.
COMPLETE AIR DISCHARGE FUNCTION
The air venting system of pipe is good its pressure is properly maintained.
LIMITELESS INSTALLAION APPLICATION
As it can be installed in every place including basements, roof tops and mid-stories, it is not frozen to burst and space can be utilized.
EXTENDED OPERATIONAL TEMPERATURE RANGE
Pressure needed for pipe system can be easily maintain, so operational temperature over 100â?? from medium or high temperature water system can be easily obtained.
GUARANTEED SMOOTH OPERATING PERFORMANCE
Effective operation is possible without problems of pipe circulation, pump efficiency, pipe noise and vibration caused by air mixture.
SANITARY SYSTEM OPERATION
Hot air heating system is sanitary because hot air is not opened to the air.
NO MAINTENANCE IS REQUIRED
No maintenance is needed and the lifespan of tank and membrane is semi-permanent, no heat loss exists and energy is saved. The lifespan of piping in life cycle cost.
[ SPECIFICATIONS ]
* Shell : Fabricated steel designed and constructed as per ASME Section VIII, Div. 1
* Bladder : Butyl Rubber
* Design Pressure : 125 psiG (862 kPa)
Options : 150 psiG (1034 kPa), 175 psiG (1206 kPa), 250 psiG (1723 kPa), 300 psiG (2068 kPa)
* Design Temperature : 240 (116 )
* Tank Volume : 40~5000 litters
Supplier: Dish end, vessel, tank, air receiver, air header, anchor bolt, foundation bolts, scaffolding, ladder, grating, ss/ms steel heavy structure, heat exchanger, expansion bellow/joint, steel ladle/ tundish, limpet coil, powder coating, blasting & painting, agitated nutch filters, air cooled, plates wet scrubbers winery plant equipments wiremesh filters, blenders strainers zero, filter press, air ducts, air handling systems boiler consultants, maintenance, repairs fibre glass piping, compressed air systems, condenser direct contact type, cone blender, consulting engineers, conta blender, conveyor belts metallic, nut, scrubbers, iron, steel, aluminium, scrap, anti vortex designs for petroleum road tankers designs for pressure vessels designs for storage tanks designs structural fabrication
The advantages of the sealed dissolving bomb show It consumes less acid and solvent, and is specially designed for the geological industry. It has the advantages of practicality, compactness and sealing. 1. Good sealing, the elements are not easy to volatilize; 2. Strong pressure bearing capacity and good permeability resistance; 3. Scientific design, more resistant to deformation; 4. Select high-purity experimental grade TFM (or PTFE), the blank value is lower, and the analysis data is more accurate; 5. Professional manufacturers with 30 years of design and production experience, can customize various sizes and styles (such as double-layer inner cup digestion tanks, Teflon coated digestion tanks, etc.), and the inner cup material can be made of PFA.
Top Close Essential Oil Perfume Tank, 100l Essential Oil Tank, Stainless Steel Essential Oil Tank Top Close 100L Essential Oil Perfume Tank is specially used for mixing of liquid such as cosmetics and perfume etc. All control of this mixer machine is pneumatic,no electronic ,so it can work with products that easy explosive or chemicals that can not contact with any electric part. As it is single layer ,so it can not heating and cooling ,however it can be made as double jeckets that can be heated Made of imported SUS304 or SUS316L stainless steel. The mixing tank body and pipe are subjected to mirror polishing. Horsepower 0.5HP Torsion 2.5Nm Inner Diameter of paddle 10.5c Speed 6800r/min Length 80cm Motor brand Taiwan MBP Material of paddle and axle SUS304
Tanks As a engineering company we can supply any items related to boilers, compressors, water treatment, refinery and petrochemical and process industries. As per the customer specs.
FINETANK, the fine tank from Korea, the high quality WATER STORAGE TANKS made of SMC PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.). FINETANK - GRP SECTIONAL WATER TANK complies to KSF 4811, KSM 3305, KSM-3401 (Korean Standard), BS 6920:2000 (British Standard), SS245:1995 (Singapore Standard) FINETANK, the WRAS approved GRP SECTIONAL WATER TANK is being produced by the ISO-9001 certified Korean manufacturer. [ ADVANTAGES ] EXCELLENT HYGIENIC PROPERTISE * Nontoxic, WRAS certified materials * Suppression of algae and microorganisms with excellent blocking of sunlight * Minimization of moss and scale by smooth surface finish OUTSTANDING DURABILITY * Optimal system by FEM (Finite Element Method) design. * Anti-corrosion materials in SS316, HDG and PE coated S.S. ABSOLUTE WATER TIGHTNESS * Foam type gasket with excellent elasticity and resilience. FREE CAPACITY DESIGN * Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc) * Versatile capacities (0.5m3 ~ 5,000m3). * Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc. EASY INSTALLATION & MAINTENANCE * User-friendly installation even in the restricted area by using standardized panels and reinforcements. PRE-INSULATED PANELS (optional) * PU foam pre-insulated panels to avoid high heat or cold. MUTI-COMPARTMENTS (optional) * A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance. [ SPECIFICATIONS ] 1 Panel : Hot-press molded SMC panel 2 Insulation : Poly Urethane Foam 3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional (External reinforcement system ->No inner tie-rod system is available up tp 4mH) 4 Roof support : SMC pultrusion pipe 5 External reinforcement : Hot dip galvanized steel 6 Roof support : SMC pultrusion pipe 7 Inner bolts : Stainless steel 316 / 304 8 External bolts : HDG steel / Stainless steel / Rubber capped steel 10 External ladder : HDG steel There're more options you're looking for. For more details, please feel free to contact us !
FINETANK - GRP SECTIONAL WATER TANK - High quality WATER STORAGE TANKS made of GRP PANELS & STEEL REINFORCEMENTS are available in various capacities and different shapes for various applications (residential/commercial buildings, water treatment plant, fire fighting, irrigation, etc.) FINETANK, the fine tank from the ISO-9001 certified Korean manufcaturer complies to international standards WRAS, BS, KS, SS. [ ADVANTAGES ] EXCELLENT HYGIENIC PROPERTISE * Nontoxic, WRAS certified materials * Suppression of algae and microorganisms with excellent blocking of sunlight * Minimization of moss and scale by smooth surface finish OUTSTANDING DURABILITY * Optimal system by FEM (Finite Element Method) design. * Anti-corrosion materials in SS316, HDG and PE coated S.S. ABSOLUTE WATER TIGHTNESS * Foam type gasket with excellent elasticity and resilience. FREE CAPACITY DESIGN * Various shapes to meet different site conditions (Square / Center vacant square / L-shape / Channel-shape, etc) * Versatile capacities (0.5m3 ~ 5,000m3). * Various panel sizes : 1x1, 0.5x0.5, 1x0.5, 0.3x0.3, 1x2, 1.15, etc. EASY INSTALLATION & MAINTENANCE * User-friendly installation even in the restricted area by using standardized panels and reinforcements. PRE-INSULATED PANELS (optional) * PU foam pre-insulated panels to avoid high heat or cold. MULTI-COMPARTMENTS (optional) * A tank can be partitioned into multi-compartments for respective use when tank is under cleaning or maintenance. [ SPECIFICATIONS ] 1 Panel : Hot-press molded SMC panel 2 Insulation : Poly Urethane Foam 3 Inner tie-rod : Stainless steel 316 / 304 / Stainless steel with PE coating - optional (External reinforcement system ->No inner tie-rod system is available up tp 4mH) 4 Roof support : SMC pultrusion pipe 5 External reinforcement : Hot dip galvanized steel 6 Roof support : SMC pultrusion pipe 7 Inner bolts : Stainless steel 316 / 304 8 External bolts : HDG steel / Stainless steel / Rubber capped steel 10 External ladder : HDG steel * INternational Certificats : WRAS, PSB, ISO-9001 There're more options you're looking for. For more details, please feel free to contact us !
Such vehicles are used for transporting liquids such as clean water and milk, oil, roads for irrigation and, when necessary, for extinguishing fires. They are multi-purpose thanks to the additional apparatus to be worn by our customers. Tanks may be elliptical, cylindrical or "d" shaped, stainless steel as required, or st-37 or st-52. There are enough breakwaters in the tank. 500m on the tank. The cover is mounted on the diameter. It has a level indicator on the tank, a staircase to go up to the top, and a mooring on the top. The single time centrifugal pump is mounted next to the chassis for easy access. The energy required for the pump is derived from the pto, which can be controlled from the driver's cab. With the aid of the lid on the tank, the tank can be filled by natural flow or by means of a hose from another source. The 20 meter 1 "diameter hose is mounted as standard equipment next to the chassis. Fender for all tires Hose booths and suitcases 4 different types of vacuum hoses Yellow warning lamp and warning plates
Galvanized Steel Tank MARS, the newest product of EKOTANK, has been designed to be a cost effective alternative to Apollo Series. Mars specifically fills the market need where budget and performance need to be as close as possible to each other. The roof system has been redesigned for the Mars series to include a soft top, replacing the conventional truss roof systems up to a diameter of 11,64 m. Prime Applications *Storage of potable and rain water *Storage of industrial liquids *Agriculture, Farms, Plantations (Manure Storage) *Industrial Applications *General Water Supply (residential or public use) *Fish Ponds at fish-hatcheries *Schools, Hospitals, Fire Departments *Army Camps, UN Organizations and its sister agencies (UNICEF,WHO,WFPETC.),Military operations *Recreational/ Theme Parks, Hotels, Resorts *Mega-mall, Shopping centers *Offices, Factory Plants, Municipal Districts (theme parks, offices) *Housing Properties, Remote Working Sites. Advantages *Thanks to its corrugated shell and hot dip galvanizing technology, Ekotank Mars is very durable both indoor and outdoor conditions *Using the latest in geomembrane technology, Mars makes sure that the liquid stored inside is not contaminated *Having a modular design, Ekotank Mars can be shipped anywhere in the world and erected on site very easily. *Ekotank Mars, when produced in optional powder coated colors can easily blend into any environment. *Mars is designed to withstand thunderstorms and earthquakes.