Titanium bar/rod:
Diameter 8mm-200mm
Astm f67 gr1, gr2, etc. Astm f136 gr5 eil
Astm b348, asme sb348 gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17
Titanium wire:
Diameter 0.03mm-6.0mm
Asme sb863, astmb 863 gr1, gr2, gr5(ti-6al-4v)
Titanium welding wire:
Diameter 0.05mm-10mm
Awsa5.16erti1, erti2, erti3, erti4, erti5, erti6, erti7, erti9, erti12, erti23
Titanium commercially pure - cp grades
Titanium ti6al4v
Titanium bars/rods
Titanium plates/sheets
Titanium tubes, pipes & fittings
Titanium foil titanium heads Titanium bars&rods, forging&casting
Heat exchanger tubes- seamless & welded
Fin tubes for process equipments
Titanium bolts, nuts & screws
(a manufacturer-cdm titanium)shanghai cdm industry co., ltd(welded&seamless tube/pipe/plate/sheet/bar/rod/wire/forging/casting/machining parts/fastener/steel/seamless tube/pipe welded tube/pipe) [cn]
Titanium titanium alloy titanium tubes, pipes & fittings titanium plates/sheets titanium bars/rods heat exchanger tubes- seamless tube& welded tube titanium bolts, nuts & screws fastener forging&casting stamping machining parts
Titanium bar, Titanium rod
We manufacture Titanium bar and titanium rod:
Grade : GR1, GR2 , GR3, GR4, GR5, GR7, GR9,GR12,GR16,GR17 etc
Forged Bar: diameter (26-200) × less than or equal to 4000
Rolled Bars: diameter (8-25) × less than or equal to 1500
Standard: ASTMB348, AMS4928, ASTM F67,ASTM F136, H7/h7 tolerance is available.
Titanium fasteners, Titanium machining parts, Titanium screw, Titanium bolt
We supply large volume fastener to chemical industry, distributor, racing motor industry.
Grade: GR2,Ti-6AL-4V, GR7
Titanium Bolt, Screw, nut and washer can be American, Metric(M0.8-M24 or bigger), and Imperial standard, also can as per drawing.
Cdm titanium plate/sheet/coil/foil
1.Titanium plate/sheet
Thickness:0.5mm-150mm maximun width:2500mm maximum length:12000mm
Ams 4911:gr5(t-i-6al-4v)for aerospace ams4916:ti-811, ti-15333 for military
Astm b265, asme sb265:gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17 for industrial
2.Titanium coil
Astm b265, asme sb265:gr1, gr2 for industrial use
Astm f67:gr1, gr2, etc.For medical astm f136 gr5(ti-6al-4v) for medical use
Thickness:0.5mm-3.0mm maximum width:1250mm lenghth as per specific request
S
Plywood outside, plastic film in side;or as per request
Titanium sheet, Titanium plate, Titanium coil, Titanium strip
We manufacture titanium sheet and titanium plate
Grade:GR1, GR2, GR4, GR5, GR7,GR9,GR12,GR16,GR17 Ti-8-1-1 etc
Size (mm): (0.5 to 150mm) thk ×Max 2500 width× Max 12000 length
Standard width and Length (mm): 1000 width× 2000 Length
Standard: ASTM B265, AMS 4911, AMS 4916.
Titanium cold coil / titanium strip: GR1 GR2,
Size(mm):0.5mm-3mmThk × max1250Width × Coil with ASTM B265.
Titanium clad (steel) tube sheet, Titanium tube sheet,Titanium clad plate
We manufacture Titanium metal clad material / Explosive clad metal material / Titanium tube sheet for process equipment. Such as Ti Gr2 as clad material, Steel A516 GR70 as base material. Standard as per ASTM B898.
Titanium Forging, Titanium ring, Titanium disc, Titanium flange
CDM Titanium is an approved ISO9001:2008 & PED 97/23 EC by TUV and a professional manufacturer and exporter of titanium material and product.
CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381
Material: GR1, GR2, GR5
Titanium Elliptical Head and Spherical Head
CDM Titanium is an approved ISO9001:2008 & PED 97/23 EC by TUV and a professional manufacturer and exporter of titanium material and product.
We manufacture Titanium Elliptical Head and Spherical Head for process equipment.
According to ASME VIII-I Standard or DIN 28013.
Titanium Foil
We manufacture titanium Foil from 0.02mm to 0.1mm
Grade: GR1 GR2 Gr5
Standard: ASTM B265
Titanium Wire, Titanium Welding Wire
We manufacture Titanium Wire and Welded Wire:
Titanium wire: GR1, GR2, Ti-6AL-4V
Diameter (0.03-6.0mm) × Straight length/Spool/Coil with ASTM B863
Titanium welded wire:
ERTi1, ERTi2, ERTi3, ERTi4, ERTi5, ERTi7, ERTi9, ERTi12, ERTi23,
Diameter: 0. 05mm~10mm (0.002inch-0.4inch) ×Straight length/Spool/Coil with AWS A5.16 standard.
Titanium Casting
We specialize in the production of titanium and titanium alloys Casting products:
Titanium investment casting of vacuum furnace,
Material: GR2 GR5 (Ti6Al4V),
Minimal thickness of casting can be: 0.8mm
Max size can be: 1200 mm×600mm
Roughness of casting: Ra3.2-6.3um
Standard: ASTM B367, BMS 7-310, BMS 7-336, AMS4911C-2002, MIL-T-81915A
Titanium Stamping
We manufacture Titanium Stamping:
Grade: GR2 GR5 (Ti6Al4V),
Size: According to drawing or sample
Titanium Forging, Titanium ring, Titanium disc, Titanium flange
CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381
Material: GR1, GR2, GR5
Titanium fasteners, Titanium machining parts, Titanium screw, Titanium bolt
CDM Titanium supply large volume fastener to chemical industry, distributor, racing motor industry.
Grade: GR2,Ti-6AL-4V, GR7
Titanium Bolt, Screw, nut and washer can be American, Metric(M0.8-M24 or bigger), and Imperial standard, also can as per drawing.
Titanium seamless tube, Titanium tube, Titanium pipe, Titanium tubing, Titanium alloy tube
CDM Titanium produce titanium seamless tube to world-wide clients, who specializing in process equipment such as heat exchanger, also for power generation, thermal, and oil and gas exploration etc.
Grade: GR1 GR2 GR3 GR7 GR9 GR12 GR16 GR17.
Size (mm): OD1.5~ 620, Wall Thickness: 0.4 ~ 20, Maximum length: 18000mm.
Standard: ASTM B338, ASME SB338, ASTM B861, DIN17861 etc.
Titanium welded tube, Titanium coil tube
CDM titanium welded tubes are processed from titanium coil, and longitudinally welded by TIG process without metal filler, so it guarantees the homogeneity of the welded area.
Grade: GR1, GR2,
Size(mm): OD(8-102)×WT(0.5-1.2)×L, at random Length, coil tube, U-Tube.
Standard: ASTM B338 , ASME SB338.
EMAIL: cdm at cdmtitan dot com
Grade: GR1, GR2, GR7,GR12 etc.
Size(mm): OD(114-1220)×WT(2.1-12.7)×L, manual welded from titanium plate.
Standard: ASME SB862.
Titanium pipe fittings,Titanium elbow,Titanium reducer ,Titanium tee,Titanium stub end,Titanium cap,Titanium outlet
We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings :
Titanium Elbow (45°, 90°, 180°)
Titanium Reducer (Concentric, Eccentric).
Titanium Tee (Straight, Reducing).
Also stub ends, caps, flanges etc.
Standard: ASME B16.5, ASME B16.9, ASME 16.11
Titanium forging, titanium ring, titanium disc, titanium flange
Cdm titanium is an approved iso9001:2008 & ped 97/23 ec by tuv and a professional manufacturer and exporter of titanium material and product.
Cdm supply titanium forging such as titanium ring, titanium disc, titanium shaft etc as per astm b381
Material: gr1, gr2, gr5
We specialize in the production of titanium and titanium alloys casting products:
Titanium investment casting of vacuum furnace,
Material: gr2 gr5 (ti6al4v),
Minimal thickness of casting can be: 0.8mm
Max size can be: 1200 mm×600mm
Roughness of casting: ra3.2-6.3um
Standard: astm b367, bms 7-310, bms 7-336, ams4911c-2002, mil-t-81915a
We manufacture titanium stamping:
Grade: gr2 gr5 (ti6al4v),
Size: according to drawing or sample
Titanium seamless tube, welded tube for heat exchanger, condenser, etc
Titanium seamless tube/pipe:
Standard:astm b337, astm b338, asme sb861, asme sb338, asme sb337
Grade:gr1, gr2, gr3, gr5, gr7, gr9, gr12, gr16, gr17, etc
Size:od 1.5-420mm wall thickness:0.4-16mm maximum length 18000mm
Titanium welded tube/pipe:
Astm b338 asme sb338 gr1, gr2 od 8-114mm wall thickness:0.5-1.2mm
Astm b337 asme sb337, asme sb862 gr1, gr2, gr7, gr12, etc. Od114-1220mm wall thickness:2.1-12.7mm
Titanium commercially pure - cp grades
Titanium ti6al4v
Titanium bars/rods
Titanium plates/sheets
Titanium tubes, pipes & fittings
Titanium foil titanium heads Titanium bars&rods, forging&casting
Heat exchanger tubes- seamless & welded
Fin tubes for process equipments
Titanium bolts, nuts & screws
