Cdm Titanium Forging, Casting, Titanium Stamping

Titanium is a metal needed to make a variety of high-performance alloys. Most of the Titanium ore mined worldwide is used to manufacture titanium dioxide an important pigment, whiting, and polishing abrasive.

We are instrumental in exporting and supplying of premium quality Titanium ore. It is basically a black heavy ore of iron and titanium.

We can supply 3000-5000mt of Titanium ore per month to any destination.

We are involved in trading of titanium alloys and all type of titanium contain material like,Rulite, Ilemenite sand, Titanium slag etc

Titanium granite is a luxurious black natural stone with bold swirls of gold, white, and gray veins. Its high durability, striking contrast, and resistance to heat and scratches make it a popular choice for countertops, vanities, and accent walls.

Description
1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration.
2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal.
3. Good oxidation resistance, low tin slag and cost savings.
4. Solder joint is bright, full and uniform.
5. Economical and can produce the lowest consumption of the solid solder joints.

Application
Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

Product Details:
Grade Gr. 1,Gr. 2,Gr. 3,Gr. 4,Gr. 5,Gr. 7,Gr. 9,Gr. 13
Usage/Application Surgery
Single Piece Length 3 meter, 6 meter
Shape Round, Rectangular, Square
Test Pressure Ultimate Tensile Strength,psi 138,000
Product Type Rockwell Hardness 36
Diameter 5 mm to 100 mm
Pipe Range 1/4\" NB to 6\" NB
Elongation 14%
Application Chemical Handling, Gas Handling, Utilities Water
Size/Diameter 3 inch, 1 inch, 1/2 inch, 2 inch
Titanium Pipes
Product Details:

Minimum Order Quantity 10 Kilogram
Size/Diameter 1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch
Single Piece Length 6 meter
Application Drinking Water, Utilities Water, Chemical Handling, Gas Handling
Titanium Pipes
We offer wide range of titanium products in form of titanium pipes, pipe fittings, flanges, in all forms, shapes and sizes.
Grades - Titanium (Grade I & II)
titanium uses
titanium is as strong as steel but much less dense. It is therefore important as an alloying agent with many metals including aluminium, molybdenum and iron. These alloys are mainly used in aircraft, spacecraft and missiles because of their low density and ability to withstand extremes of temperature. They are also used in golf clubs, laptops, bicycles and crutches.

power plant condensers use titanium pipes because of their resistance to corrosion. Because titanium has excellent resistance to corrosion in seawater, it is used in desalination plants and to protect the hulls of ships, submarines and other structures exposed to seawater.

titanium metal connects well with bone, so it has found surgical applications such as in joint replacements (especially hip joints) and tooth implants.

the largest use of titanium is in the form of titanium(iv) oxide. It is extensively used as a pigment in house paint, artistsâ?? paint, plastics, enamels and paper. It is a bright white pigment with excellent covering power. It is also a good reflector of infrared radiation and so is used in solar observatories where heat causes poor visibility.

titanium(iv) oxide is used in sunscreens because it prevents uv light from reaching the skin. Nanoparticles of titanium(iv) oxide appear invisible when applied to the skin.

Product name:Titanium nitride
Formula:TiN
CAS No.:25583-20-4
EINECS No.:247-117-5
Melting point:2950 �ºC
Appearance:Brown powder


Application:

There are all kinds of surface treatments - TiN coating (titanium nitride) being one of them. Industries such as energy, food processing, aerospace, medical, and automotive use this coating on a regular basis.
The following industries frequently use TiN coatings:
1.Food processing equipment
2.Extrusion dies
3.Plastic molds
4.Dental instruments and implants
5.Surgical implants and medical devices
6.Aerospace components
The Properties of Titanium Nitride:
Used to prevent material buildup, the material has a nonstick surface. It protects sliding surfaces when used as a coating. For welding applications and hot stamping, this is particularly critical
Because of its corrosion resistance and strength, popular uses for titanium nitride include end mills and drill bits. Cutting edges are kept intact by the coating. Also for that reason, it is frequently used in medical devices. Studies are currently being done as to the use of titanium nitride for hip replacements and other surgical implants

Titanium Forging, Titanium ring, Titanium disc, Titanium flange
CDM Titanium is an approved ISO9001:2008 & PED 97/23 EC by TUV and a professional manufacturer and exporter of titanium material and product.
CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381
Material: GR1, GR2, GR5

Titanium Casting
We specialize in the production of titanium and titanium alloys Casting products:
Titanium investment casting of vacuum furnace,
Material: GR2 GR5 (Ti6Al4V),
Minimal thickness of casting can be: 0.8mm
Max size can be: 1200 mm×600mm
Roughness of casting: Ra3.2-6.3um
Standard: ASTM B367, BMS 7-310, BMS 7-336, AMS4911C-2002, MIL-T-81915A

Titanium Stamping
We manufacture Titanium Stamping:
Grade: GR2 GR5 (Ti6Al4V),
Size: According to drawing or sample

Titanium Forging, Titanium ring, Titanium disc, Titanium flange
CDM supply titanium forging such as Titanium ring, titanium disc, titanium shaft etc As Per ASTM B381
Material: GR1, GR2, GR5