The device is powered by suction pump machine attached to handle and suction tubing.It is power assisted liposuction procedure,it can shape the body by removing fat safely with less bruising. Special type of cannula along with tumescent process is used altogether to reduce bruising.
Rapidly vibrating Cannula breaks fat area easily and then sucked out of the body easily by suction. It can reduces the fat safely with less risk possible.
Which ensure faster recovery period with less complication. Doctor also can reduce liposuction surgery time with the device.
Features
1.There is less plugging and congestion of the cannula due to constant motion and vibration of the suction cannula.
2.High resonant frequency and high speed of fat absorbing with high efficiency, as well as convenient operation and labor-saving.The process to be less labor intensive and operative times can be decreased.
3.The Power Assisted Liposuction technique uses a mechanized cannula which may reduce trauma for the patient and make the surgeon's job easier.
4.Use the device,the cannula is mechanized so that it can move on its own and break up fat cells. The movements are small and reduce the need for the surgeon to push the cannula around manually as often.
5.Makes the process safer and less traumatic.This may reduce damage to the surrounding tissues and prevent complications.
The device is only with vibration function,no vacuum funcion.It's used with the liposuction suction pump machine.Liposuction cannulas 10 pieces are included in one set of the machine.
Configuration:
- machine 1 piece
- vibration handpiece with hose 1 piece
- cannulas 10 pieces
- manual suction handle 2 pieces
- foot switch 1 piece
Specifictions
Voltgec220v±22v frequency50hz±1 hz
Power20v the output voltge12v
The monopolr microsurgery electrocogultor is n idel tool for stopping bleeding.It's effective nd esy to operte.It is smll nd light in weight, convenient to tke nd hndle.
Min pplictions: pplicble to stnch in the superficil surgeries, the cogultion of tissue nd burning of neoplsm, etc.
Ccessories:
Electric pen 1 pcs,
Electric cogultion hed 5 pcs,
The power cble 1 pcs.
Specifications:
It has two level filter equipments,combined
with liposuction aspirator which has hydrodynamic function.
Fat transplantation filter system
The fat transplantation filter system has two level filter equipments,combined with liposuction aspirator which has hydrodynamic function,would be better option,not necessory using centrifuge,the fat can be transplanted safely without infection hazards.Capacity for the system is 1000ml,stainless steel material,.autoclavable, after first level filter and second level.the fat granule can be transplanted.
The operation of the system video is available.
Standard list:
1.base:solid stainless steel,it is stable, This window if for observing liquid deposition at the bottom of the tank
2.cover:stainless steel
3.primary filter:2mm filter space design,Used to filter membrane and large fat particles.
4.Useless Liquid suction tube:the suction tubes connected to the bottom of the collecting tank,to ensure the fat particles can not be sucked by tube. It is designed by special size to filter the fat
5.Suction plug: the design of the suction hole on the cover has two functions, one,use the suction pump to suck all of the useless liquid from the bottom after liposcution, Secondly, use liposuction cannula to suck the useful fat from the bottle after useless liquid suction, the fat sucked out of collecting tank.
6.The hole design can ensure the whole fat absorption process are carried out in a sealed sterile container, high security
7. one handle with 4 cannulas
Application
Is mainly used for autogenous fat transplantation for breast augmentation, hip etc. Large amount of fat transplantation of plastic surgery, it can be used with the Hydrodynamic liposuction equipment, also can be used with general liposuction machine or vacuum machine
The advantages
The whole suction, filter collection, useless liquid suction procedure can be proceed in the sealed sterile bottle that can effectively prevent cross infection; This fat filter design is good for transplanting fat particles; It is Introduced by Germany fat filtering system design idea, with exquisite technology, it is the ideal equipment autogenous fat transplantation.
The FUE hair transplant equipment is an automatic motorized punching device to extracts grafts for FUE technique.
Variable speed 0 to 3000 RPM
Reverse & Forward rotation option.
Easy to install and carry
Low heat
Foot switch
Speed Control
Punch is durable
Quick change for FUE punches system without using auxiliary tool can improve work efficiency greatly.
Packing including:
1. Motor: 1pcs
2.Handle Piece: 1pcs
3.FUE Punches: 10pcs
4.Tweezer: 2pcs (straight and curved)
5.Hair Implanter Pen: 3pcs (dia:0.8mm/1.0mm/1.2mm)
6.Silicon block for hair: 1pcs
7.Implantation knife handle and blade : 1 set
8. Foot Pedal: 1pcs
Hair transplant operating instructions:
Hand piece
1.Can adjust intermediate silvery white part,turn to the upper rotating, head clip mouth open, at this time, put accessory into the gap, and then spin to the right, the gap closed, will clamp tight, then can supply power to work.
2.When turning the handle to the upper middle silver parts, head clip mouth open, at this time cannot turn on the power.
3.Handle part only adjustable intermediate silver part, black and gray part cannot be adjusted.
Main operating instructions:
1.All parts are one-on-one interface
2.If use foot switch, must step foot that can work.
3.The power supply of main control button, before they leave the factory has been adjusted, red plate have shown that 220 v voltage, please don't change without permission. If your country voltage is 110 v, you can change it till red plate show 110v.
Sterilization method:
accessories can be high temperature and high pressure sterilization, for other part,use fumigation or with alcohol disinfection,then pack in one-time sterilization bag seal. Ban soak.
Specification:
Rotating Speed Range:2000-2500RPM
Weight:150g (including battery)
Size:183*20mm
Punch:0.8mm1.0mm 1.3mm
Autoclavable to 132
The extractor is suitable for all kinds of hair transplant clinical application,not only can increase the follicles dissociation rate so that increase the obtained rate,saving operation time,but also reduces the cost.
The extractor is made of medical grade alloy material, can be autoclavable.Put into the autoclave sterilizer cabinet after remove the battery and rear cover switch.It is ergonomic design,enhance the flexibility,increase the follicles dissociation rate one time in a short time.
Usage Method:
1.Angle:use the magnifying glass in the operation,aim the follicle,adjust the angle of punch,make the punch and hair growth angle parallel,insert the punch into the scalp 2.5-3.0mm then extract quickly,that is a free follicle.
2.Depth: the best depth is 2.5-3.0mm, avoid causing trauma to the hair loss patients.
3.Density:make proper extraction in the hirsute areas,avoid serious outcome in hair recovery.
Sterilization Method:
a.remove the battery and rear cover switch,wipe the handle with alcohol cotton
b.put in the sterilization bag
c.sterilize in autoclave less than 132,such as 20 minutes with 121,or 15 minutes with 132.
Packing list:
1. electric handle 1 pcs
2.punch 0.8mm 1 pcs,0.9mm 1 pcs,1.0mm 1 pcs
3.tweezer 1 pcs
4. knife handle and blade
5.battery 2 pcs
6.charger 1 pcs
Hair implanter pen for FUE hair transplant
One set including 3 pieces.
Size:0.8mm, 1mm, 1.2mm
The implanter can be used for taking hair follical and implant hair follicle.The needle is not changeable,the implanter pen and needle can not be separated.
Material:silicone
Minimum order:20 pieces
The silicone nasal implants are made by medical grade silicone materials-elastomer with exceptional physical and biocompatibility characteristics.
We have more than 20 models and different sizes now, and we can also make the order as your design.
Medical grade silicone tempus implants
Two sizes:
Item 502: 52mm*42mm
Item 503: 76mm*60mm
Material: silicone
Color: white and skin tone
The silicone tempus implants are made by medical grade silicone materials-elastomer with exceptional physical and biocompatibility characteristics.
We have silicone nasal and chin implants more than 20 models and different sizes, and we can also make the order as your design.
Silicone Ocular Shield With Suction Cup
Material: Silicone
One pair: 2 pieces
Function: Protect eyes for eyelid surgery
Medical grade silicone forehead implant
Size: 198mm*75mm*95mm
Material: silicone
Color: white
The silicone forehead implant is made by medical grade silicone materials-elastomer with exceptional physical and biocompatibility characteristics.
We have silicone nasal and chin implants more than 20 models and different sizes, and we can also make the order as your design.
Vacuum aspirator for fat grafting,use with syringe tube,connect with cannula.It is used for small area liposuction independently,not need any other device.
Size:10ml,20ml and 50ml
3 pieces in one set(10ml 1 piece,20ml 1 piece,50ml 1 piece)
Specifications
Voltageïac220v±22v frequencyï50hz±1 hz
Power20va the output voltag12v
The monopolar microsurgery electrocoagulator is an ideal tool for stopping bleeding.It's effective and easy to operate.It is small and light in weight, convenient to take and handle.
Main applications: applicable to stanch in the superficial surgeries, the coagulation of tissue and burning of neoplasm, etc.
Accessories:
Electric pen 1 pcs,
Electric coagulation head 5 pcs,
The power cable 1 pcs.
Manicure Pedicure Kit nail art machine
For main power supply&control part
Rated voltage range: 220-240v-50hz
Rated power input: 15w
Output rated voltage: DC 0-18V
Output current: 1.0A
For handpiece(motor) part:
Working voltage: DC 0-18V
Rated current: 1.0A
No load speed: 2900-3000rpm
Load speed: 27000-28000rpm
Instructions:
Don't change the turning directions too frequently, otherwise it will damage the grinding head.
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
After operation, put the grinding head on the top of the main panel.
While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.
For long idle time, please disconnect the source power.
Any unauthorized disassembling of the prohibited. In case of any breakdown, please contact the agent or authorized repair center, we promise swift, high-quality and satisfactory service.
If the supply cord if damaged, it must be replaced by the manufacturer, its service agent or similarly persons in order avoid a hazard.
The apparatus is not ready for the physically weak, slow response or a mental disorder of persons(including children) to use, except in the security responsibility of the guidance or assistance.
Surgical instrument double eyelid blepharoplasty
one set:14 piece
Material:stainless steel
14 Rhinoplasty silicone nasal implants
Specifications of Blepharoplasty double eyelid surgery instruments kit
Material: high quality stainless steel
One set:16 pcs
The following items in one set:
10cm curved fine scissor (sharp head) - 1pcs
10cm straight fine scissor (sharp head) - 1pcs
10cm toothed forceps - 1pcs
10cm smooth forceps - 1pcs
12.5cm curved mosquito forceps - 1pcs
12.5cm needle holder - 1pcs
13cm single claw eyelid retractor - 1pcs
13cm double claw eyelid retractor - 1pcs
15cm lid retractor (8mm) - 1pcs
eye lid plate - 1pcs
castroviejo caliper (0-20mm) - 1pcs
eyelid prop up - 2pcs
measuring plate - 1pcs
curved shaft hook - 1pcs
sterilization box - 1pcs
1000ml Fat collection autoclavable canister
High quality glass material, can be sterilized by high temperature high pressure, can be autoclavable,unique fat collection canister for use with liposuction procedures.
Size: 1000ml
Specifications of Rhinoplasty nose surgery instruments kit
Material: high quality stainless steel
One set:16 pcs
The following items in one set:
12.5cm straight scissor with teeth (blunt head) - 1pcs
12.5cm curved scissor with teeth (blunt head) - 1pcs
14cm scissor for dissecting - 1pcs
12.5cm needle holder - 1pcs
15cm double claw retractor - 1pcs
15cm double ball claw retractor - 1pcs
19cm nose freer elevator (semi-circle 7mm) - 1pcs
19cm nose freer elevator (dual blades 7mm) - 1pcs
18cm nasal freer septum elevator - 1pcs
21cm ballenger swivel knife - 1pcs
17cm implant forceps - 1pcs
19cm bone curette - 1pcs
Nasal Elevator (thin) - 1pcs
L shape nasal retractor - 1pcs
Nose graver - 1pcs
sterilization box - 1pcs
Specifications of rhytidectomy face lift surgical instrument set
Material: high quality stainless steel
One set: 11 pcs
The following items in one set:
19cm puncture needle - 1pcs
27cm puncture needle - 1pcs
27cm face lift needle (round hole) - 1pcs
27cm dissector face lift hook - 1pcs
27cm dissector long blade - 1pcs
27cm dissector short blade - 1pcs
27cm right hook knife - 1pcs
27cm left hook knife - 1pcs
27cm knife - 1pcs
27cm saw - 1pcs
Sterilization box - 1pcs
Tumescent infiltration liposuction cannula
These cannula are used specifically for the infusion of tumescent solution. The configuration of the ports allows even distribution of the fluid.
6 pieces in one set,luer lock
One set:6 pieces
The sizes as following in one set:
Diameter x Length
1.5mm x 15cm 3 pieces
1.5mm x 20cm 2 pieces
2.0mm x 25cm 1 pieces
We also can produce the following sizes of cannulas:
Diameter: 0.8mm(21G),1.0mm(20G),1.2mm(18G),1.5mm,2mm,2.5mm,3mm,3.5mm,4mm.
Length: from 5cm to 40cm.
Specifications
bipolar electrocoagulator.
(bipolar coagulation): the electric current would not release to the neutral electrode which promises only mini surgical damage, it's applicable to the surgeries on the sensitive tissue and the mini invasive surgeries due to its avoidance of electric art,There will be no carbonization phenomenon nor smoke or smell in the whole process.
Blepharoplasty Tweezer Double Eyelid Forceps Set
one set:4 piece
Material: titanium
One for design,one for setting, two for drill.
Fine multiple teeth which precisely interdigitate to provide secure, atraumatic grip of delicate tissue.Especially useful for eyelid retraction during blepharoplasty.
Functions:
1.lighting is provided by high quality and long life light source.
2.high definition radiation light spot.
3.power supply and charging by wide voltage(AC-90V-242V)
4.after charging,it can be used for 4 hours continuously.
5.the weight of the lamp bulb is only 80g.
Specifications
Voltage: 90V-240V 50Hz-60Hz
Color Temp:6000k
bulb power: 3W
Input power: less than 5W
Charging time:5 hours
Power on time:4 hours
Operating Environment
Nvironment Temperature:-10 degree to 40 degree
Atmosphere pressure:86 kPa to 106 kPa
Products List
Headlight 1 piece
A-3 Power Supply 1 piece
power cable 1 piece
Please contact with me to discuss ordering options.
graceliu019 at hotmail.com.Whatsapp:+86 15902040684,Skype: grace.llq
You can take a look on my online shop https://www.dhgate.com/store/17977191
The liposuction machine is a new generation power assisted liposuction system, which integrated high-speed vibrating power assisted liposuction function, aspirator, and infusion function. With the single machine, it is feasible to implement a vibro liposuction surgery, without depending on other devices. It enhances the operation efficiency, and surgeons experience less fatigue during power liposuction with easier penetration and removal of adipose tissue. Microcomputer calculates and provides precise to-and-fro movement.
Features
1.One-way oil-free vacuum pump, with excellent and quick pressure boosting, and no countercurrent when engine stopping.
2.With portable cool-air inner-circulation frequency modulation can be easily connected to any common negative-pressure machines and fat-absorbers.
3.Hard parts frosted system is both good at milling bone structures and absorbing its fragments and powders as well as cleaning, which greatly reduces the surgeon's working intensity and saves operation time
4.Adjustable peristaltic water-injection system can not only be used as swelling anaesthetic injection, but also as the water-resource of hard parts frosted-absorbing system, with simple and convenient operation.
5.No heat generation during operation, no radiation and scald.
6.Handle-made choice to crack emulsified lipocytes, which can effectively protect skin nerves and blood vessels.
7.High resonant frequency and high speed of fat absorbing with high efficiency, as well as convenient operation and labor-saving.
8.Well-distributed fat-absorbing process, flat operation positions, very light pains and quick recovery.
Configuration:
- Vibration handpiece (electric)
- Suction needle kit (5 different size cannulas as 1 kit)
- Manual suction handle
- Injecting system (including tubing & needle)
- Storage bottle (2000ml x 2pcs)
- Pedal switch
- Power cable
v
The fat grafting liposuction cannula kit used for during fat grafting, fat transfer,injection. This cannula comes with a standard luer lock end and can be re-used once sterilized.This is a long-lasting and very durable single port cannula.
Specifications
The cannulas are luer lock hub.
In one set:
multi-hole cannulas: 2pcs
liposuction and fat grafting cannulas:15pcs
infiltration cannulas:3pcs
aspirator: 3pcs
injection tube:1 pcs
connect tube: 1 set
luer lock to luer lock: 2 pcs
stopper: 6 pcs
We also can produce the following sizes of cannulas:
Diameter: 0.8mm(21G),1.0mm(20G),1.2mm(18G),1.5mm,2.0mm,2.5mm,3.0mm,3.5mm,4mm.
Length: from 5cm to 40cm.
Vacuum aspirator for fat grafting,use with syringe tube,connect with cannula.It is used for small area liposuction independently,not need any other device.
Size:10ml,20ml and 50ml
3 pieces in one set(10ml 1 piece,20ml 1 piece,50ml 1 piece)
Material: stainless steel
The NanoTransfer is a device designed to uniformly size harvested adipose tissue so that it is easily injected with micro needles. A cartridge is housed in the NanoTransfer.It's used for filtering fat during liposuction and fat transfer surgery.
Configuration in one set:
- NanoTransfer 1 piece
- Nano Fat Transfer Cartridges 1 piece
- Transfer Mesh 20 pieces
- Transfer Luer to Luer 3x1.1mm holes 1 piece
- Transfer Luer to Luer 3x1.2mm hole 1 piece
- Transfer Luer to Luer 2x1.5mm hole 1 piece
Thermoplastic External Nasal Splint
Three sizes:5cm * 5cm, 7.5cm * 7.5cm,10cm * 10cm
It is softened by immersion in warm temperature water, making it more closely conform to nasal dorsum of an individual user.
Benefit
It becomes soft faster when soaked in hot water of 65-70 degree, and also hardens faster when the temperature is lowered.
Instruction for Use:
1.Apply skin closure tapes to the dorsum of the nose
2.Trim splint to correspond to the nose
3.Place a sheet in a hot water bath to make splint soft
4.Apply splint to the dorsum of nose
5.Apply skin tape to the splint to hold it to the skin
6.Keep the splint for 5days
7.Remove the splint and apply new splint for 2weeks
Specifications of Hump nose augmentation rhinoplasty apparatus kit
Material: high quality stainless steel
One set:15 pcs
The following items in one set:
15cm bone chisel (left, blade width 6mm) - 1pcs
15cm bone chisel (right,blade width 6mm) - 1pcs
15cm bone chisel (blade width 6mm) - 1pcs
15cm bone chisel (left, blade width 8mm) - 1pcs
15cm bone chisel (right, blade width 8mm) - 1pcs
15cm bone chisel (blade width 8mm) - 1pcs
15cm bone chisel (gun shape) - 1pcs
15cm bone chisel (shovel shape) - 1pcs
19cm curved bone rasp - 1pcs
19cm straight curved bone rasp - 1pcs
20cm curved bone saw (left) - 1pcs
20cm curved bone saw (right) - 1pcs
21cm D shape nasal dissector double ended - 1pcs
18cm hammer - 1pcs
sterilization box - 1pcs
Material:medical grade silicone
Color:Skin Tone and white
The silicone chin implants are made by medical grade silicone materials-elastomer with exceptional physical and biocompatibility characteristics.
We have more than 20 models and different sizes now, and we can also make the order as your design.
Silicone carving blocks for orthopaedics, can used for nasal, lower jaw and other body part, can be carve as you need.Carvable into individual implant shapes.
Material: Silicone
Color:Skin Tone and white
Durometer: soft meduim and hard
Size: 12cm*6cm*2cm
We can also make any size of the silicone block as you demand.
The features of fiber illuminator xenon light source
1. Working life of the bulb: 50h
2. Small and light
3. Switch power circuit design
4. Stable
5. Applicable with endoscope, microscope and ingeniously constructed testing
Product Description
This light source is small and light, stable, witch power circuit design, can be applicable with endoscope, micrscope and ingeniously constructed testing. The bulb can be used for 50hours.
Technology data:
Voltage: AC220V50Hz
Input power:470VA
bulb power: 250W
FUSE:F5AL 250V*2
product size:30x29x12cm
image plane illuminance: 5800000lx
working life of bulb:50-200h
Cable length:1.8 meters
The quoation is including light guiding cable 1 piece and breast retractor 1 piece.
Medical grade silicone malar implants
Size: 52mm*25mm*1mm
Material: silicone
Color: yellow
The silicone malar implants are made by medical grade silicone materials-elastomer with exceptional physical and biocompatibility characteristics.
We have silicone nasal and chin implants more than 20 models and different sizes, and we can also make the order as your design.
