LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
* GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
* High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
* 52 track verification chann els
* SBAS (WAAS or EGNOS,MSAS)
* Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
* Tracks up to 8 CW jammers
* Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
* Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
* SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
* Reacquisition Time : 0.1 second
* RF Metal Shield for best performance in noisy environments
Hardware and Software
* Based on the high performance features of the SiRFstarV low power single core logic.
* Adaptive micropower controller
* Only 50 to 500�¼A maintains hot start capability (core logic)
* < 10mW required for TricklePower mode
* RoHS compliant (lead-free)
* SMT pads allow fully automatic assembly processes equipment and reflow soldering
* Advanced navigation features
* Smart sensor supported by I�²C interface
* External interrupt input for context change detection
Advantages
* Built-in LNA.
* Built-in internal ROM and based on Firmware 5.5.X
* It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
* Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
* Support SiRFaware technology
* Support adaptive Micro Power Controller power management mode.
* < 10mW TricklePower, so user can leave power on all day instead of power off.
* Suitable for battery drive devices that need lower power consumption application
* Cost saving through elimination of RF and board to board digital connectors
* Flexible and cost effective hardware design for different application
Main Technical Specification
- Frequency Range (MHz) : 434
- Bandwidth (MHz) : ±3
- VSWR : 2.0
- Gain(dBi) : 1.80
- Max Input power (W) : 50
- Input Impedance () : 50
- Polarization Type : Vertical
- Antenna Length(mm) : 88mm(90) / 108mm (180)
- Connector Type : SMA
This antenna system consists of two functional blocks, the LNA portion and the patch antenna.
CONFIGURATION
RF Cable
- RF Coaxial Cable, 2.7± 0.2mm
- Cable Length : 5M ± 5cm
- RF Connector : SMA 180(M) / MCX 90 (M)
GENERAL
ENVIRONMENTAL CONDITIONS
- Operation Temperature : -40 to + 85
- Storage Temperature : -40 to + 85
- Relative Humidity : 40% to 95%
ELECTRICAL SPECIFICATIONS
- Input Voltage : Min:2.5V Typ:3.0V Max:5.5V
- Power Consumption : Typ: 10mA. Max: 15mA. @3.0V
ANTENNA
- Antenna Dimensions : 25 x 25 x 4 mm
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- GAIN : 1575.42MHZ : -3dBi Typ. @zenith
1602MHZ : -5dBi Typ. @zenith
- Polaration : RHCP
LNA and FILTER
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5)
1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5)
- Noise Figure : 2.0 dB Typ. ( + 25 ± 5 ) / 2.6 dB Max. ( + 85 )
- Out Band Rejection : 1587.5 ±140MHz 15dB Min
- Output Impedance : 50
- Output VSWR : 2.0 Max
TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector)
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain : 1575.42MHZ: 27± 3dBi @zenith
1602MHZ: 29.5± 3dBi @zenith
- Output Impedance : 50
- Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna.
CONFIGURATION
RF Cable
- RF Coaxial Cable, 2.7± 0.2mm
- Cable Length : 5M ± 5cm
- RF Connector : SMA 180(M) / MCX 90 (M)
GENERAL
ENVIRONMENTAL CONDITIONS
- Operation Temperature : -40 to + 85
- Storage Temperature : -40 to + 85
- Relative Humidity : 40% to 95%
ELECTRICAL SPECIFICATIONS
- Input Voltage : Min:2.5V Typ:3.0V Max:5.5V
- Power Consumption : Typ: 10mA. Max: 15mA. @3.0V
ANTENNA
- Antenna Dimensions : 25 x 25 x 4 mm
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- GAIN : 1575.42MHZ : -3dBi Typ. @zenith
1602MHZ : -5dBi Typ. @zenith
- Polaration : RHCP
LNA and FILTER
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5)
1602MHz:28 dB Min.30 dB Typ.( + 25 ± 5)
- Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 )
- Out Band Rejection : 1587.5 ±140MHz 15dB Min
- Output Impedance : 50
- Output VSWR : 2.0 Max
TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector)
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain : 1575.42MHZ: 27± 3dBi @zenith
1602MHZ: 29.5± 3dBi @zenith
- Output Impedance : 50
- Output VSWR : 2.0 Max
This antenna system consists of two functional blocks, the LNA portion and the patch antenna.
CONFIGURATION
RF Cable
- RF Coaxial Cable, 2.7± 0.2mm
- Cable Length : 5M ± 5cm
- RF Connector : SMA 180(M) / MCX 90 (M)
GENERAL
ENVIRONMENTAL CONDITIONS
- Operation Temperature : -40to + 85
- Storage Temperature : -40 to + 80
- Relative Humidity : 40% to 95%
ELECTRICAL SPECIFICATIONS
- Input Voltage : Min:2.5V Typ:3.0V Max:5.5V
- Power Consumption : Typ: 10mA. Max: 15mA. @3.0V
ANTENNA
- Antenna Dimensions : 25 x 25 x 4 mm
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- GAIN : 1575.42MHZ : -3dBi Typ. @zenith
1602MHZ : -5dBi Typ. @zenith
- Polaration : RHCP
LNA and FILTER
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain (without Cable) : 1575.42MHz:28 dB Min.30 dB Typ.( + 25 ± 5)
1602MHz:28 dB Min.30 dB Typ.( + 25± 5)
- Noise Figure : 2.0 dB Typ. ( + 25 ± 5) / 2.6 dB Max. ( + 85 )
- Out Band Rejection : 1587.5 ±140MHz 15dB Min
- Output Impedance : 50
- Output VSWR : 2.0 Max
TOTAL SPECIFICATIONS (Through Antenna, LNA, Cable and Connector)
- Frequency Range : 1575.42 ± 10 MHz. / 1602 ± 8MHz
- Gain : 1575.42MHZ: 27± 3dBi @zenith
1602MHZ: 29.± 3dBi @zenith
- Output Impedance : 50
- Output VSWR : 2.0 Max
SS5-1315 is the GPS module of CSR SiRFstarV. The module is powered by
latest CSR SiRFstarV 5e-based chip, multi-GNSS platform and able to
track GPS and Glonass constellation at the same time.
With DS-Tech proprietary navigation technology that provides you
stable and accurate navigation data. The suitable form factor and
miniature design is the best choice to be embedded in a device such
as portable navigation device, personal locator, speed camera
detector and vehicle locator.
Applications
- Automotive navigation
- Personal positioning and navigation
- Mobile gaming
- Cameras
- Asset Tracking
- Others location-aware consumer devices
Features
- 52 track verification channels.
- Support GPS, GLONASS, QZSS and being deployed for Compass and Galileo.
- Support client-based and server-based SiRF InstantFix TM Extended Ephemeris (EE),
- Embedded CGEE / SGEE (With back-end server support) to speed up TTFF performance.
- Power supply 3.3V voltage.
- SMT type with stamp holes
- Small form factor with embedded SiRF Star V technology.
- Removes in-band jammers up to 80 dB-Hz, tracks up to 8 CW jammers
- Excellent sensitivity for urban canyon and foliage environments.
- Dimension : 13 x 15.2 x 2.2 mm
GPS/GLONASS/GALILEO/QZSS/SBAS MODULE
The GNSS Module is based on the high performance GNSS engine designed
by our company. The GNSS Module is capable of tracking and processing
with four GNSS (GLONASS, GPS, GALILEO, QZSS) and SBAS (WAAS, EGNOS,
MSAS, GAGAN, SDCM) signals concurrently, which is especially
beneficial in difficult environments such as urban canyons or under
tree canopy. Extended ephemeris® technology allows the user to get
position fix quickly after power-up (within 10 s) with acceptable
accuracy. The GNSS Module features auxiliary functionality such as
Data logger, Odometer and Geo-fencing for easy integration to
customer applications. Communication with the module is accomplished
through a dual serial interface (DUART) that supports NMEA 0183 v4.10
and GSN binary data protocol. 1PPS output enables the use of the
module in precise t iming applications. Modules are offered in
14.3x13.7 mm 24 -pad LCC package.
Key Features
- Concurrent processing of 4 GNSS (GLONASS, GPS, GALILEO, QZSS)
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM)
- Standalone and code-differential (RTCM SC104 v2.3) modes
- 1PPS output for precise timing applications
- Positioning update rate up to 10 Hz
- 3 options for different fields of application
- Tracking and positioning sensitivity: -163dBm
- Power consumption:
Features:
- SiRF Star V ultra low power chipset
- GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
- Compact module size for easy integration : 15 x 14 x 2.8 mm
The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART).
The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as:
-Mobile gaming
-Cellular handsets
-Cameras
-Asset tracking
-Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing
-Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power
-Full support for client-based and server-based SiRFInstantFixTM
-Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance
-Use of software control modules to achieve power saving state
SiRF V GPS Module Features
Performance
-Highest performance Solution:
-GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
-High sensitivity navigation engine (PVT) tracks as low as
- GPS:-164dBm
- GLONASS:-161dBm
-48 track verification channels
-SBAS (WAAS or EGNOS,MSAS)
-Active Jammer Remover:
-Removes in-band jammers up to 80 dB-Hz
-Tracks up to 8 CW jammers
-Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support
-Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
-SiRFGeoRecovTM Reverse EE makes positioning process being done under power
saving mode.
-Reacquisition Time: 0.1 second
-RF Metal Shield for best performance in noisy environments
Hardware and Software
-Based on the high performance features of the SiRF Star V low power single chipset.
-Adaptive Micropower Controller:
-Only 50 to 500gA maintains hot start capability
-
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P
The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix.
Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as:
- Fleet Management / Asset Tracking
- AVL and Location-Based Services
Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- 52 track verification channels
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
- RF Metal Shield for best performance in noisy environments
- High sensitivity navigation engine (PVT) tracks as low as
- GPS: -165dB,
- GLONASS: -161dBm
- SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN)
- Tracks up to 8 CW jammers
- Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- Reacquisition Time: 0.1 second
Hardware and Software
- Based on the high performance features of the SiRFstarVâ?¢ low power single core logic.
- Adaptive micropower controller
- Only 50 to 500 A maintains hot start capability (core logic)
-
DS-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset.
DS-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies.
Thanks to the low power consumption technology, the DS-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc.
Features
- 72 channel Ublox M8 positioning engine.
- Ultra high sensitivity to -167 dBm.
- GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support.
- Supports GLONASS and is ready for Galileo.
- Supports UART, USB and RS232 interface.
- Up to 10 Hz update rate.
- LED indicate location fix.
- Ultra low power consumption.
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm
â?¢ 52 track verification channels
â?¢ SBAS (WAAS or EGNOS,MSAS)
â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
â?¢ Tracks up to 8 CW jammers
â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support
â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
â?¢ Reacquisition Time: 0.1 second
â?¢ RF Metal Shield for best performance in noisy environments
Hardware and Software
â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic.
â?¢ Adaptive micropower controller
â?¢ Only 50 to 500�¼A maintains hot start capability (core logic)
â?¢ < 10mW required for TricklePowerâ?¢ mode
â?¢ RoHS compliant (lead-free)
â?¢ Advanced navigation features
â?¢ Smart sensor supported by I�²C interface
â?¢ External interrupt input for context change detection
â?¢ MMCX RF Connector
â?¢ Dimension : 36 x 24 x 10.5 mm
The SIM7000C is Multi-Band LTE-TDD/LTE-FDD and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT M1(eMTC) and NB-IoT up to 375kbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. the module provides much flexibility and ease of integration for customer's application.
The biggest advantage of the product is low power consumption.
General features
* Single-Band TDD-LTE B39
* Three-Band FDD-LTE B3/B5/B8
* GSM/GPRS/EDGE 900/1800 MHz
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V, Typ:3.8V
* Operation temperature: -40â?? to +85â??
* Dimension: 24*24*2.6 mm
* Weight: 3.0g
* GNSS
Specifications for Data transfer
* LTE CAT M1
- Uplink up to 375kbps,
- Downlink up to 375kbps
* NB-IoT
- Uplink up to 72kbps,
- Downlink up to 32kbps
* EDGE Class
- Max. 236.8Kbps(DL/UL)
* GPRS
- Max. 85.6Kbps(DL/UL)
Other features
* USB Driver for Microsoft Windows2000/XP/Vista/Win7/Win8/Win10
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/WindowsCE/Mobile
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* DTMF*
* Gobi SDK to the Win7/Win8/Linux
* MBIM to Win8
* Source code of the PC manager of the device for reference
Interfaces
* USB2.0
* UART
* SIM card
* GPIO
* ADC
* PCM*
This antenna is designed for LTE/GSM/UMTS/3G/WiFi wireless.
* Operating Frequency:700-960/1700-2700 MHz
* Antenna Type:Rectangle Patch antenna
* Relative Humidity:Double-side tape
* Gain:1-3 dBi
* VSWR:
SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board.
Target market: EMEA/Korea/Thailand
SIM7600E-H-PCIE
* Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41
* Support 3G UMTS/HSPA+ B1/B5/B8
* Support 2G GSM/GPRS/EDGE B3/B8
* GSM/GPRS/EDGEB3/B8
General features
* Mini PCIE package
* Control Via AT Commands
* Supply voltage range: 3.0V~ 3.6V, 3.3V Typical
* Operation temperature: -40â??to +85â??
* Bandwidth: 1.4/3/5/10/15/20MHz
* 3GPP E-UTRA Release 11
* Dimensions: 50.8*31*5.35mm
* Weight: 12.6g
Specifications for Data transfer
* LTE Downlink up to 150Mbps, Uplink up to 50Mbps
* HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps
* WCDMA Downlink/Uplink up to 384Kbps
* EDGE Downlink/Uplink up to 236.8Kbps
* GPRS Downlink/Uplink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10
* USB Driver for Linux /Android
* RIL supporting for Android 2.4/4.0/5.0/6.0/7.0
* MBIM to Win8
* Firmware update via USB
* TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS
* SSL3.0/TLS1.0/TLS1.2
* DTMF (Sending and Receiving)
* Audio Playing
* USB Audio and VoLTE
* FOTA
* eCall*
Interfaces
* USB2.0 with High speed up to 480Mbps
* UART
* GPIO
* Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas
* (U)SIM card (1.8V/3.0V)
* Digital Audio through PCM
* Analog Audio (Optional)
* Embedded SIM card socket (Optional)
* GNSS: GPS/GLONASS/Beidou/Galileo*
4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network.
On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network.
4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc.
General features:
EDGE multi-slot class 33
GPRS multi-slot class 33
Compliant to GSM phase 2/2+
Output power:
- Class 3 (0.25W) for LTE/UMTS
- Class 4 (2 W) for GSM 900
- Class 1 (1 W) for GSM 1800
Control via AT commands
(3GPP TS27.005/3GPP TS27.007 )
Supply voltage range 3.3V- 4.2V
Low Power consumption
- Sleep mode: 3mA
- Power down: 16 �¼A
Dimensions: 51.0Ã??30.0Ã??4.6mm
Operation Temperature: -40�°C to +85�°C
MSL : 3
Band Configuration
LTE-FDD Band 1/3/5/7/8/20/28
LTE-TDD Band 38/40
UMTS Band 1/5/8
GSM Band 3/8
Specifications for GNSS
GPS frequency: 1575.42MHz
At least support 44 channels
Sensitivity
- Acquisition: -158dBm
- Tracking: -162dBm
TTFF
- Cold Start: 28s
- Warm Start: 18s
- Hot Start: 1s
Specifications for data
Support Release 11 Category 4
LTE-FDD up to 150 Mbps DL,50 Mbps UL
LTE-TDD up to 130 Mbps DL,35 Mbps UL
DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL
EDGE class 33: 296Kbps DL,236.8Kbps UL
GPRS class 33: 107kbps DL,85.6kbps UL
CSD up to 14.4 kbps
Non transparent mode
PBCCH support
PPP-stack
Coding schemes CS 1,2,3,4
FOTA
TCP/IP
NDIS
Specifications for SMS
Point-to-point Mo and MT
SMS cell broadcast
Text and PDU mode
Protocols
TCP/ UDP/ PPP/ FTP/ HTTP/ HTTPS/
SMTP*/ SMTPS*/ MMS/ FTPS*/ NTP/
PING/ QMI/ SSL/ NITZ/ CMUX/ MQTT*
Additional features
VoLTE
Phone book
PCM
DTMF
Interfaces:
RF connector
PCI Express�® Mini Card Interface
- Power supply
- USB 2.0 high speed
- UICC/SIM/UIM card interface 3V, 1.8V
- UART
- Analog Audio
- PCM
Antenna connector
SIM Card Holder
Approvals:
RoHS / CE / GCF / RCM / NCC
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network.
To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application.
General features
* NB-IoT Tri-bandB3/B5/B8
* EGPRS Dual-bandB5/B8
* Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands)
* Supply voltage range 3.1V-4.2V
* Low Power consumption
- eDRX mode:
The SIM7600CE is Multi-Band LTE-TDD/LTE-FDD/HSPA+/TD-SCDMA/EVDO and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT4up to 150Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, SPI, I2C,GPIOetc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module providesmuch flexibility and ease of integration for customer's application.
General features
* Quad-Band TDD-LTE B38/B39/B40/B41
* Tri-Band FDD-LTE B1/B3/B8
* Dual-Band TD-SCDMA B34/B39
* Dual-Band UMTS/HSDPA/HSPA+ B1/B8
* CDMA 1X/EVDO BC0
* GSM/GPRS/EDGE900/1800 MHz
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢??to +85�¢??
* Dimension: 50.80*31*5.35mm
* Weight: 5.5g
* GNSS gpsOneGen 8B;standalone;assisted,XTRA;
Specifications for Data transfer
* LTE CAT4-Uplink up to 50Mbps, -Downlink up to 150Mbps
* TD-SCDMA-Uplink up to 128Kbps, -Downlink up to 384Kbps
* TD-HSDPA/HSUPA -Uplink up to 2.2 Mbps, -Downlink up to 2.8 Mbps
* HSPA+ -Uplink up to 5.76Mbps, -Downlink up to 42 Mbps
* UMTS-Uplink/Downlink up to 384Kbps
* EDGE Class-Uplink/Downlink up to 236.8Kbps
* GPRS -Uplink/Downlink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installationfor windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
Interfaces
* USB2.0
* UART
* SIM card
* SPI
* I2C
* Constant current sink
* GPIO
* ADC
* PCM
* SDIO
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.
The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market.
It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike.
General features
* Tri-Band FDD-LTE B3/B8/B20
* GPRS/EDGE 900/1800Mhz
* Output power
- GSM900: 2W
- DCS1800: 1W
* Control Via AT Commands
* Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V
* Operation temperature: -40â?? to +85â??
* Dimensions: 24 X 24 X 2.6mm
* Weight: 3.0g
* GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS)
Specifications for Data transfer
* LTE CAT-M1(eMTC)
- Uplink up to 375kbps, Downlink up to 300kbps
* NB-IoT
- Uplink up to 66kbps, Downlink up to 34kbps
* EDGE Class
- Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
* GPRS
- Uplink up to 85.6Kbps, Downlink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows XP/Vista/7/8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux/Android
* Firmware update via USB
* TCP/IP
* PPP
* SMS
* EMAIL
* FTP/HTTP/SSL
* VoLTE*
* FOTA*
Interfaces
* USB2.0 x1 (high-speed)
* UART x2 (7-wire UART and 2-wire UART interface multiplex from GPIO)
* SIM card x1 (1.8V and 3V)
* I2C x1
* GPIO x5
* ADC x1
Consumption
* Power off: 7uA
* PSM: 9uA
* Sleep: 1mA
* Idle: 11mA
The SIM7500SA is Multi-Band LTE-FDD/HSPA module solution in a LGA type which supports LTE CAT1 up to 10Mbps for downlink data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, I2C, GPIO etc. With abundant application capability like TCP/UDP/FTP/FTPS/HTTP/HTTPS/SMTP/POP3 and MMS, the module provides much flexibility and ease of integration for customer's application.
General features
* FDD-LTE B1/B3/B5/B7/B8/B28
* Dual-Band UMTS/HSDPA/HSPA+ B1/B5
* Control Via AT Commands
* Supply voltage range: 3.4V~ 4.2V
* Operation temperature: -40�¢?? to +85�¢??
* Dimension: 24*27*2.75mm
* Weight: 4.0g
Specifications for Data transfer
* LTE CAT1
- Uplink up to 5Mbps,
- Downlink up to 10Mbps
* HSPA+
- Uplink up to 5.76 Mbps,
- Downlink up to 42 Mbps
* WCDMA
- Uplink/Downlink up to 384Kbps
* CSD
- WCDMA data rate 57.6Kbps
- WCDMA 64kbps CSD for Video call
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux /Android
* RIL supporting for Android/Windows CE/Mobile
* Automatic installation for windows
* Linux API SDK
* Firmware update via USB
* TCP/IP/IPV4/V6 Multi-PDP,MT PDP
* FTP/FTPS/HTTP/HTTPS/SMTP/POP3/DNS/MMS
* DTMF
* MBIM to Win8
* Source code of the PC manager of the device for reference
Interfaces
* USB2.0
* UART
* SIM card
* I2C
* GPIO
* ADC
* PCM
