Sirf V Gps/glonass Module Ss5-1315

Features: - SiRF Star V ultra low power chipset - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration : 15 x 14 x 2.8 mm The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART). The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as: -Mobile gaming -Cellular handsets -Cameras -Asset tracking -Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing -Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power -Full support for client-based and server-based SiRFInstantFixTM -Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance -Use of software control modules to achieve power saving state SiRF V GPS Module Features Performance -Highest performance Solution: -GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy -High sensitivity navigation engine (PVT) tracks as low as - GPS:-164dBm - GLONASS:-161dBm -48 track verification channels -SBAS (WAAS or EGNOS,MSAS) -Active Jammer Remover: -Removes in-band jammers up to 80 dB-Hz -Tracks up to 8 CW jammers -Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support -Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. -SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. -Reacquisition Time: 0.1 second -RF Metal Shield for best performance in noisy environments Hardware and Software -Based on the high performance features of the SiRF Star V low power single chipset. -Adaptive Micropower Controller: -Only 50 to 500gA maintains hot start capability -

Ct-G551 3.3V utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as : - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments

GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm

SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -

The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm â?¢ 52 track verification channels â?¢ SBAS (WAAS or EGNOS,MSAS) â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz â?¢ Tracks up to 8 CW jammers â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. â?¢ Reacquisition Time: 0.1 second â?¢ RF Metal Shield for best performance in noisy environments Hardware and Software â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic. â?¢ Adaptive micropower controller â?¢ Only 50 to 500�¼A maintains hot start capability (core logic) â?¢ < 10mW required for TricklePowerâ?¢ mode â?¢ RoHS compliant (lead-free) â?¢ Advanced navigation features â?¢ Smart sensor supported by I�²C interface â?¢ External interrupt input for context change detection â?¢ MMCX RF Connector â?¢ Dimension : 36 x 24 x 10.5 mm

GPS/GLONASS/GALILEO/QZSS/SBAS MODULE The GNSS Module is based on the high performance GNSS engine designed by our company. The GNSS Module is capable of tracking and processing with four GNSS (GLONASS, GPS, GALILEO, QZSS) and SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) signals concurrently, which is especially beneficial in difficult environments such as urban canyons or under tree canopy. Extended ephemeris® technology allows the user to get position fix quickly after power-up (within 10 s) with acceptable accuracy. The GNSS Module features auxiliary functionality such as Data logger, Odometer and Geo-fencing for easy integration to customer applications. Communication with the module is accomplished through a dual serial interface (DUART) that supports NMEA 0183 v4.10 and GSN binary data protocol. 1PPS output enables the use of the module in precise t iming applications. Modules are offered in 14.3x13.7 mm 24-pad LCC package. Key Features - Concurrent processing of 4 GNSS (GLONASS, GPS, GALILEO, QZSS) - Support SBAS (WAAS, EGNOS, MSAS, GAGAN, SDCM) - Standalone and code-differential (RTCM SC104 v2.3) modes - 1PPS output for precise timing applications - Positioning update rate up to 10 Hz - 3 options for different fields of application - Tracking and positioning sensitivity: -163dBm - Power consumption:

Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.

GPS/GNSS/GALILEO/SBAS Module The Ct-G354 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm 52 track verification channels SBAS (WAAS or EGNOS,MSAS) Active Jammer Remover, removes in-band jammers up to 80 dB-Hz Tracks up to 8 CW jammers Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) �?�¢?? Need operator support Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. Reacquisition Time: 0.1 second RF Metal Shield for best performance in noisy environments Hardware and Software Based on the high performance features of SiRFstarV low power single core logic. Adaptive micropower controller Only 50 to 500�¯�¿�½?�?�¼A maintains hot start capability (core logic) < 10mW required for TricklePower mode RoHS compliant (lead-free) Advanced navigation features Smart sensor supported by interface External interrupt input for context change detection MMCX RF Connector Dimension : 3

Ct-G340 S5 of products utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks then old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic)