Specifications
Description: Very fast-acting, currentlimiting fuse.
Dimensions: See page 12 for Class Tdimensions.
Construction: Melamine tube with silverfuse element.
Ratings:
Volts 300Vac (or less)
160Vdc (15-600A)
170Vdc (601-1200A)
Amps 1-1200A
IR 200,000 RMS Sym.
20,000A dc @ 160Vdc
100,000A dc @ 170Vdc
Agency Information: CE, Std. 248-15, Class T, UL Listed,
Guide JDDZ, File E4273, CSA Certified, Class 1422-02, File
53787.
Features and Benefits
Series combination ratings with branch circuit breakers
allows broad range of coverage, independent of breaker
manufacturer.
Current limitation for non-inductive circuits provides Class T
current-limiting response to maximum ground fault and
short-circuit conditions.
200,000A interrupting rating provides high ratings at all
circuit locations.
Small footprint allows more efficient use of available space.
Typical Applications
Large Apartment Complexes
Multi-Family Meter Stacks
VFD Line Protection
JJN-1
JJN-2
JJN-3
JJN-6
JJN-10
JJN-15
JJN-20
JJN-25
JJN-30
JJN-35
JJN-40
JJN-45
JJN-50
JJN-60
JJN-70
JJN-80
JJN-90
JJN-100
JJN-110
JJN-125
JJN-150
JJN-175
JJN-200
JJN-225
JJN-250
JJN-300
JJN-350
JJN-400
JJN-450
JJN-500
JJN-600
JJN-700
JJN-800
JJN-1000
JJN-1200
F 200 A type with neutral pole on the left
Function: protection against the effects of sinusoidal alternating and direct pulsating earth fault currents; protection against indirect contacts and additional protection against direct contacts (with In=30 mA). Product helpful where for installation habits, for wiring with busbars or cables, for special needs neutral on the left is needed.
Application: residential, commercial, industrial.
Standard: IEC/EN 61008-1; IEC/EN 61008-2-1
Marking: according to EN 61008-1; EN 61008-2-1
F204 A-25/0.03
F204 A-40/0.03
F204 A-63/0.03
F204 A-80/0.03
F204 A-100/0.03
F204 A-125/0.03
F204 A-25/0.1
F204 A-40/0.1
F204 A-63/0.1
F204 A-25/0.3
F204 A-40/0.3
F204 A-63/0.3
F204 A-80/0.3
F204 A-100/0.3
F204 A-125/0.3
F204 A-25/0.5
F204 A-40/0.5
F204 A-63/0.5
General Information
Extended Product Type : RT6 24DC
Product ID : 2TLA010026R0000
EAN : 7350024431858
Catalog Description : Safety Relay RT6 24DC
Long Description : A universal safety relay for many safety applications. Relay outputs 3NO/1NC
Popular Downloads
Instructions and Manuals 2TLC172028M9801
Dimensions
Product Net Depth / Length : 120 mm
Product Net Height : 84 mm
Product Net Width : 45 mm
Product Net Weight : 0.33 0 kg
Certificates and Declarations (Document Number)
Declaration of Conformity - CE : 2TLC172078D0201
Instructions and Manuals : 2TLC172028M9801
Main
Range : TeSys
Product name : TeSys D
Product or component type : Contactor
Device short name : LC1D
Contactor application : Motor control
Resistive load
Utilisation category : AC-3
AC-1
AC-4
Poles description : 3P
Pole contact composition : 3 NO
[Ue] rated operational voltage :
Main
Range : TeSys
Product name : TeSys D
Product or component type : Contactor
Device short name : LC1D
Contactor application : Motor control
Resistive load
Utilisation category : AC-3
AC-4
AC-1
Poles description : 3P
Pole contact composition : 3 NO
[Ue] rated operational voltage :
Bussmann is the world leading manufaturer for circuit protection.
170 series product is used widely in high power inverter, rectifier, convertors which need to protect the semiconductor.
The product part no:
20
170m8 series, e.G:170m8056
170t7020
170e2091
170e2093
170e2095
170e2097
170e2098
170e2161
170e3579
170e3581
170e3586
170e3949
170e4276
170e5417
170e5420
170e5421
170e6143
170f3002
170f3003
170f3004
170f3005
170h3003
170h3004
170h3005
170h3006
170l7278
170l7290
170l7299-h
170l9572
170l9576
170l9578
170l9581
170l9583
170l9665
170l9868
170t8073
1~10pcs/box;
Standard lot size: size000~size4
Weight: depends on products
Dimensions: depends on products
Ratings
Volts
690 Vac/500 Vdc (IEC)
700 Vac/500 Vdc (UL)
Amps 6-200 A
IR
CT: IEC 90 kA RMS Sym., 40 kA at 500 Vdc,
UL 200 kA RMS Sym., 50 kA at 500 Vdc
ET, EET, FE and FEE: 200 kA RMS Sym.,50 kA at 500 Vdc
Operating class aR
Agency information
Designed and tested to BS88 part 4 and IEC 60269 Part 4
UL Recognized*
CCC for ET, FE, EET, FEE
CE
35FE
40FE
35FE
45FE
50FE
63FE
71FE
80FE
90FE
100FE
D16, D27, D33, D125 DIN Type D Diazed fuses
DIN style Type D ceramic body low voltage fuses.
Ratings
Volts 500 Vac
Amps 2-100 A
IR 50 kA
Agency information
IEC 60269 and DIN 49515, CE
2D16
4D16
6D16
10D16
16D16
20D16
25D16
2D27
4D27
6D27
10D27
16D27
20D27
25D27
35D33
50D33
63D33
80D125
100D125
500 Vac/dc (UL), 35 to 1600 A
North American style bolted tags high speed fuses, for the protection
of DC common bus, power converters/rectifiers and reduced rated
voltage starters.
Ratings
Volts
500 Vac (UL)
500 Vdc (35-800 A only)
Amps 35-1600 A
IR
200 kA RMS Sym.
50 kA at 500 Vdc
Agency information
UL Recognized, JFHR2, E91958, FWH-_B (35-200 A) and FWH-_A
(1000 and 1200 A), JFHR2, E56412 FWH-_A (225-800 A)
CSA Class 1422-30, File 53787 (35-1600 A)
CE
FWH-35B
FWH-40B
FWH-45B
FWH-50B
FWH-60B
FWH-70B
FWH-80B
FWH-90B
FWH-100B
FWH-125B
FWH-150B
FWH-175B
FWH-200B
FWH-225A
FWH-250A
FWH-275A
FWH-300A
FWH-325A
FWH-350A
FWH-400A
FWH-450A
FWH-500A
FWH-600A
FWH-700A
FWH-800A
FWH-1000A
FWH-1200A
FWH-1400A
FWH-1600A
FNQ-R Class CC Limitronâ?¢ time-delay,
rejection-type fuse
Time-delay, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading FNQ-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions.
Ratings
Volts
600 Vac (or less)
300 Vdc (15-20 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR
200 kA RMS Sym.
20 kA DC (15 and 20 A only)
Agency information
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
Time-delay compatible with inrush characteristic of small control
transformers
Current limitation at Class CC levels provides maximum
component short-circuit current rating protection
200 kA interrupting rating provides high ratings for control circuit
locations
Typical applications
Line protection, small control transformers
Industrial controls and panels
Isolated, in-line fuse holders
FNQ-R-1/4
FNQ-R-3/10
FNQ-R-4/10
FNQ-R-1/2
FNQ-R-6/10
FNQ-R-3/4
FNQ-R-8/10
FNQ-R-1
FNQ-R-1-1/8
FNQ-R-1-1/4
FNQ-R-1-3/10
FNQ-R-1-4/10
FNQ-R-1-1/2
FNQ-R-1-6/10
FNQ-R-1-8/10
FNQ-R-2
FNQ-R-2-1/4
FNQ-R-2-1/2
FNQ-R-2-8/10
FNQ-R-3
FNQ-R-3-2/10
FNQ-R-3-1/2
FNQ-R-4
FNQ-R-4-1/2
FNQ-R-5
FNQ-R-5-6/10
FNQ-R-6
FNQ-R-6-1/4
FNQ-R-7
FNQ-R-7-1/2
FNQ-R-8
FNQ-R-9
FNQ-R-10
FNQ-R-12
FNQ-R-15
FNQ-R-17-1/2
FNQ-R-20
FNQ-R-25
FNQ-R-30
KTK fast-acting 13/32" x 1-1/2"supplemental fuse
Fast-acting supplemental fuse.
Black color code (600 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses.
Agency information
â?¢ UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS
compliant, CE
Features
â?¢ Black color code for 600 Vac rating
â?¢ Fast-acting for resistive loads
â?¢ Melamine tube construction with nickel-plated bronze endcaps
Typical applications
â?¢ Control circuits
â?¢ Lighting circuit protection
â?¢ Meter circuits
KTK-1/10
KTK-1/8
KTK-2/10
KTK-1/4
KTK-3/10
KTK-4/10
KTK-1/2
KTK-6/10
KTK-3/4
KTK-1
KTK-1-1/4
KTK-1-1/2
KTK-2
KTK-2-1/2
KTK-3
KTK-3-1/2
KTK-4
KTK-5
KTK-6
KTK-7
KTK-7-1/2
KTK-8
KTK-9
KTK-10
KTK-12
KTK-15
KTK-20
KTK-25
KTK-30
Catalog symbols:
EV20-(amp) 20 mm diameter
EV25-(amp) 25 mm diameter
EV30-(amp) 30 mm diameter
Description:
Eatons Bussmann® series Electric Vehicle (EV)
fuses for the protection of high power battery
charging and management systems up to 500 Vdc
in ratings from 50 to 400 amps.
Specifications:
Ratings
Volts - 500 Vdc
Amps 50-400 A
Interrupting rating
Max DC 20 kA
Min DC 200%
Agency information
Designed to:
JASO D622
ISO 8820-8
Manufactured under a TS16949 quality system
for compliance with automotive requirements
RoHS compliant
REACH declaration available upon request
Packaging
20 mm fuses: 250 fuses per box
25 mm fuses: 100 fuses per box
30 mm fuses: 100 fuses per box
Features:
Higher voltage rating provides overall system efficiency using smaller, more economical
conductors while meeting the needs of higher voltage battery packs.
Higher interrupting rating protects high capacity battery packs needed for vehicle acceleration and range requirements.
Up to ten times faster opening under high fault current conditions helps assure reliable
protection of circuits and components.
Requires up to 48% less space than conventional high speed fuses to help reduce
space and weight.
Data logging system marks each fuse with a serial number and date code for traceability of Critical to Quality characteristics.
To help project the life of the fuse in your application, unique driving profiles and
conditions can be simulated to verify proper fuse size and performance under a wide range of driving behaviors.
Operation as low as 200% overload provides back up protection to the battery management system.
Can be applied in parallel to realize greater ampacity within sizing guidelines.
CH modular, IP20 finger-safe DIN-Rail holders for Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and
without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and
threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CHM1DIU
CHM1DU
CHM2DIU
CHM2DU
CHM3DIU
CHM3DU
CHM4DIU
CHM4DU
CHM1DNIU
CHM1DNU
CHM1DNXU
CHM1DCIU
CHM1DCU
CHM2DCIU
CHM2DCU
CHM3DCIU
CHM3DCU
CHM4DCIU
CHM4DCU
CHCC1DIU
CHCC1DU
CHCC2DIU
CHCC2DU
CHCC3DIU
CHCC3DU
CHCC1DI-48U
CHPV1IU
CHPV1U
CHPV2IU
CHPV2U
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged
together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Wire range
75°C and 90°C Cu
18-4 AWG (0.8-21.1mm2)
Solid, stranded and fine stranded*
* See data sheet 10430 for application details.
Terminals
Single or dual conductors
Comb busbar
Terminal screws
Standard phil-slot
Optional hex head (order by adding -H suffix to the catalog
number, e.g., CHM1DU-H)
Torque
30 lb-in (3.4 Nâ?¢m) maximum
Flammability
UL 94V0, self-extinguishing
Storage and operating temperature
-4°F (-20°C) to +194°F (90°C) indicating
-4°F (-20°C) to +248°F (120°C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75°C or 90°C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90°C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CHCC1DIU
CHCC1DU
CHCC2DIU
CHCC2DU
CHCC3DIU
CHCC3DU
CHCC1DI-48U
Features/Benefits
600 V 110 -30 A Class CC and Midget fuse cover puller
that offers increased protection when removing fuses.
Simple removal without the need for a separate puller.
Meets Dead Front requirements.
Easily gangable with 1 8" diameter wire.
For use with all 600 V Class CC and Midget 1
10 -30 A fuses.
Label provided for easy fuse identification.
Recommended Fuse Blocks
L60030C and L60030M
Ordering Information
Poles Pack Quantity Catalog Number Ordering Number
1 10 SPL001 0SPL0001T
1 100 SPL001 0SPL0001H
2 5 DSPL001 DSPL0001Z
2 100 DSPL001 DSPL0001H
1 10 SPL001PCB SPL0001PCBT
BMfuse-a 15 years Bussmann distributor.
Bussmann is the world leading brand in fuse industry with 100+
years as a professional fuse manufacturer.
PN list are:
FWH-100C
FWH-125C
FWH-150C
FWH-175C
FWH-200C
FWH-225C
FWH-250C
FWH-275C
FWH-300C
FWH-325C
FWH-350C
FWH-35C
FWH-400C
FWH-40C
FWH-450C
FWH-45C
FWH-500C
FWH-50C
FWH-600C
FWH-60C
FWH-700C
FWH-70C
FWH-800C
FWH-80C
FWH-90C
Indicators
High speed square body fuses are available with the following
indicators.
Visual indicator
The indicator situated in one end plate is clearly visible as soon as
the fuse has operated. The minimum rated voltage for operating the
indicator is 20 V.
Type T indicator
The indicator is situated on one cover plate with a cover plate tag
to accommodate an auxiliary switch. The minimum rated voltage for
operating the indicator is 20 V. A special low rated voltage indicator
(1.5 V) is available on request.
Type K indicator
The indicator is situated on the fuse body. It is covered by an adapter
for snap-on mounting of a microswitch. The rated operating voltage
of the indicator is 1.5 V. As a matter of safety, the factory mounted
adapter must not be removed from the fuse.
Microswitches
High speed square body fuses with either Type T or K indicators
can be equipped with a microswitch for remote signaling of fuse
operation. All microswitches have one normally open (NO) and one
normally closed (NC) contact.
Ratings
Volts 250 Vac
Amps 5 A
170H0235
170H0236
170H0237
170H0238
170H0069
Description
The Littelfuse Class CC, CD and midget blocks offer
generous space savings and enhanced value. DIN-rail
mounting and universal mounting holes are available as
well as an indication feature on all Class CD fuse blocks.
Features/Benefits
Space-saving design
Universal mounting holes for easy replacement.
Indication offered on CD blocks.
One hand release from DIN rail optional.
Rejection feature that prevents the insertion of fuses
with lower interrupting rating or voltage ratings.
Clip design reduces resistance and heat .
Non DIN-rail fuse blocks have interlocking feature
allowing ganging for any number of poles.
Covers available for all amperages to enhance safety.
Specifications
Voltage Rating 600 Vac/dc
Ampere Ratings L600M Midget (10x38): 30 A
L600C Class CC: 30 A
LFC Class CD: 60 A
L600CM Class CC & Midget: 30 A
Dielectric strength 1200 V minimum
Materials Clip/terminals: Tin-plated copper alloy
Box lug: Copper
Screw & captive pressure plate: Zinc-plated steel
Base: Thermoplastic
UL94 V-0 flammability rating
Withstand Rating L60030C: 200kA
(SCCR) L60030M:10kA, 20kA or 100kA based on the
Midget fuse used
LFC600: 200kA
Approvals L600M: UL Recognized (File: E14721)
CSA Certified (File: LR7316)
L600C: UL Listed (File: E14721)
CSA Certified (File: LR7316)
LFC: UL Listed (File: E14721)
CSA Certified (File: LR7316)
L600CM: UL Recognized (File: E14721)
CSA Certified (File: LR7316)
Environmental RoHS Compliant, Lead (Pb) Free
Recommended Fuses
Class CC Blocks: CCMR, KLDR, KLKR
Class CM Block: Fuses same as CC & Midget Blocks
Class CD Blocks: CCMR
Midget Blocks: BLF, BLN, BLS, FLA, FLM, FLQ,
FLU, KLK, KLKD, KLQ
L60030C1C
L60030C2C
L60030C3C
L60030C1PQ
L60030C2PQ
L60030C3PQ
L60030C1SQ
L60030C2SQ
L60030C3SQ
L60030C1CDINR
L60030C2CDINR
L60030C3CDINR
L60030C1PQDINR
L60030C2PQDINR
L60030C3PQDINR
L60030C1SQDINR
L60030C2SQDINR
L60030C3SQDINR
L60030M1C
L60030M2C
L60030M3C
L60030M1PQ
L60030M2PQ
L60030M3PQ
L60030M1SQ
L60030M2SQ
L60030M3SQ
L60030M1CDINR
L60030M2CDINR
L60030M3CDINR
L60030M1PQDINR
L60030M2PQDINR
L60030M3PQDINR
L60030M1SQDINR
L60030M2SQDINR
L60030M3SQDINR
Approvals
VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764
Contact Data
Contact arrangement : 1 form A, 1 NO
Rated voltage : 30VDC, 250VAC
Max. switching voltage : 30VDC, 277VAC
Rated current : 3 to 10A
Contact material : AgNi, AgSnO, AgCdO
Min. recommended contact load : 100mA, 5VDC
Initial contact resistance : 100mohms at 1A, 5VDC
Frequency of operation : 360 ops./h
Operate time max. :
OJ/OJE-L: 15ms
OJ/OJE-D/H: 10ms
Release time max. : 4ms
Electrical endurance :
LM 3A, 250VAC, res., -30°C to +95°C 100x103 ops.
DM 5A, 250VAC, res, -30°C to +85°C 60x103 ops.
LMH(2) 8A, 250VAC, res., -30°C to +70°C 50x103 ops.
LMH2 8A, 250VAC,res., -30°C to +85°C 30x103 ops.
HM 10A, 250VAC, res., -30°C to +70°C 10x103 ops.
HM2 10A, 250VAC, res., -30°C to +85°C 10x103 ops.
HM6 10A, 250VAC, res., -30°C to +85°C 50x103 ops.
Contact ratings :
LM 3A, 250VAC
DM 5A 250VAC
LMH(2) 8A 250VAC
HM(2), HM6 10A 250VAC
Mechanical endurance, DC coil : 10x106 operations
Product code /Part Number
OJ-SH-105LM,000 / 1461404-1
OJE-SH-112LM,000 / 1461401-5
OJE-SS-112LM,000/ 4-1419128-6
OJ-SH-112LM,000 / 1461404-6
OJ-SS-112LM,000 / 2-1419129-1
OJ-SS-124LM,000 /3-1419129-1
OJ-SH-124LM,000 / 1461404-4
OJE-SH-105DM,000 /1461400-1
OJE-SS-105DM,000/2-1419128-8
OJE-SH-112DM,000 / 1461400-4
OJE-SS-112DM,000 /4-1419128-2
OJ-SH-112DM,000 / 1461406-4
OJ-SS-112DM,000 / 1-1419129-8
OJE-SH-124DM,000 / 1461400-5
OJE-SS-124DM,000 /6-1419128-2
OJ-SS-124DM,000/ 2-1419129-9
OJE-SH-105LMH,000/ 1461403-3
OJE-SH-105LMH-WG /1721875-2
OJE-SS-105LMH,000/1461034-2
OJ-SH-105LMH,000 /8-1419128-1
OJ-SH-106LMH,000/ 1461247-1
OJE-SH-109LMH,000 /1461403-2
OJE-SS-109LMH,000 /5-1419144-3
OJ-SH-109LMH,000 / 1461247-2
OJ-SS-109LMH2-WG/1721874-4
OJ-SS-109LMHF,000 / 1721083-5
OJE-SH-112LMH,000 / 1461403-4
OJE-SH-112LMH-WG/ 1721875-5
OJE-SS-112LMH,000 /5-1419128-0
OJE-SS-112LMH2 / 1721261-5
OJ-SH-112LMH,000 / 9-1419128-8
OJ-SH-112LMH2 /1-1721260-1
OJ-SS-112LMH,000 / 2-1419129-5
OJ-SS-112LMH2 / 1721260-5
OJ-SS-112LMHF,000 /1721083-1
OJE-SH-124LMH,000 /1461403-5
OJE-SH-124LMH-WG / 1721875-6
OJE-SS-124LMH,000 / 7-1419128-1
OJ-SH-124LMH,000 / 1461247-3
OJ-SS-124LMH,000 / 4-1419144-4
OJ-SS-124LMH2 / 1721260-6
OJ-SS-124LMH2-WG / 1721874-6
OJ-SS-124LMHF,000 /1461014-2
OJ-SH-105HM,000/1461405-3
OJE-SH-112HM,000/ 1461402-6
OJE-SS-112HM,000/ 4-1419128-3
OJE-SS-112HM2,000 / 1721539-5
OJ-SH-112HM,000 / 1461405-5
OJ-SS-112HM,000/1419135-3
OJ-SS-112HMF,000 / 1461078-5
OJ-SS-112HM6-WG / 2071398-1
OJE-SS-124HM,000/ 6-1419128-4
OJ-SS-124HM,000/ 1440007-2
OJ-SS-124HM2,000/ 1721538-7
Approvals
UL E82292, TUV R50138967
Contact Data Contact arrangement :
1 form A, 1 NO
1 form C, 1 CO
Rated voltage : 28VDC, 277VAC
Max. switching voltage : 28VDC, 277VAC
Rated current : 10A
Contact material : AgZnO, AgCdO, AgNi
Min. recommended contact load :' 100mA, 5VDC
Frequency of operation : 600 ops./h
Operate/release time max. : 10ms/5ms
Electrical endurance :
AgZnO: form A, 10A, 250VAC, res., +85°C, Class B or F only 100x103 ops.
AgCdO: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
AgNi: form A, 10A, 250VAC, res., +85°C, Class B or F only 50x103 ops.
Contact ratings, form A/form B :
10A/6A 250VAC resistive
10A/6A 28VDC resistive
Mechanical endurance, DC coil : 10x106 operations
Product code/Part number
ORWH-SH-105D1F,000 / 1-1721150-0
ORWH-SS-105D1F,000 / 2071448-5
ORWH-SH-105DM1F,000 / 2071448-3
ORWH-SS-109D1F,000 / 2071448-4
ORWH-SH-112D1F,000 / 1-1721150-3
ORWH-SS-112D1F,000 / 1721150-5
ORWH-SH-112DM1F,000 / 2071448-8
ORWH-SS-112DM1F,000/2071448-2
ORWH-SH-124D1F,000 /1-1721150-5
ORWH-SS-124D1F,000 / 2-2071448-0
ORWH-SH-124DM1F,000 / 1-2071448-5
ORWH-SS-124DM1F,000 /1-2071448-8
ORWH-SH-105H3F,000 /2071448-6
ORWH-SS-105H3F,000 /2071448-7
ORWH-SH-112H3F,000 / 2071448-9
ORWH-SS-112H3F,000 /1-2071448-2
ORWH-SH-112HM3F,000 / 1-2071448-0
ORWH-SS-112HM3F,000 / 1-2071448-3
ORWH-SS-118H3FH,000 / 1721948-6
ORWH-SH-124H3F,000 /1-2071448-6
ORWH-SS-124H3F,000 / 1-2071448-9
ORWH-SH-124HM3F,000 /1-2071448-4
ORWH-SS-124HM3F,000 / 1-2071448-7
ABC ferrule and ABC-V axial leads fast-acting 1/4" x 1-1/4Ë? ceramic tube fuse
Ratings
Volts
250 Vac/125 Vdc (1/4-15 A, 20-30 A)*
250 Vac (18 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR**
35 A (1/4-1 A @ 250 Vac)
100 A (11/2-3 A @ 250 Vac)
200 A (4-10 A @ 250 Vac)
750 A (12-15 A @ 250 Vac)
400 A (18-20 A @ 250 Vac)
10 kA (1/4-15 A @ 125 Vac)
1 kA (18-30 A @ 125 Vac)
10 kA (1/4-15, 20 A @ 125 Vdc)
400 A (25-30 A @ 125 Vdc)
200 A (25-30 A @ 250 Vac)
* CSA approvals for 25 A and 30 A are at 125 Vac IR 1000 A and Vdc IR 400 A
(IR 1000 A at 75 Vdc)
** Interrupting ratings measured at 70% 80% power factor on AC. The
interrupting ratings for 18 A and 20 A were measured at 85%-95% power factor on AC. The interrupting ratings for 25 A and 30 A were measured at 89% power factor on AC.
Agency information
UL Listed, Std. 248-14, Guide JDYX File E19180 up to 15 A; UL
Recognized, Guide JDYX2, File E19180, 18-30 A; CSA Certified,
Class 1422-01 and 1422-30, File 53787, RoHS compliant, CE
Features
Ceramic body allows for higher amp/volt rating combinations
Typical applications
Electronic circuits
Catalog no. Material* Finish
1A1907-02 Cartridge brass None/bright dipped
1A1907-03-R High performance copper Bright tin
1A1907-05 High performance copper Silver
1A1907-06-R Cartridge brass Bright tin
PV 1000 Vdc 10x38mm PV fuses
A range 10x38mm, 1000 Vdc PV fuses
for the protection and isolation of
photovoltaic strings that are specifically
designed for use in PV systems with
extreme ambient temperature, high
cycling and low fault current conditions
(reverse current, multi-array fault)
string arrays. For application flexibility,
the PV 10x38mm fuse is available as
a cylindrical fuse as well as bolt-on,
single and dual PCB tab and in-line
crimp terminal versions.
Ratings
Volts 1000 Vdc
Amps 1-20 A
IR 50 kA
Terminals and conductors
Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG
PV wire
Agency information
UL Listed to 248-19, Guide JFGA, File E335324, IEC 60269-6
(gPV), CSA File 53787, Class 1422-30 (1-15A), 20 A Pending, CCC
(1-20 A), RoHS Compliant
Features
Meets UL and IEC photovoltaic standards for global acceptance
Low watts loss performance for energy efficiency
Low temperature rise performance for more precise sizing
In-line crimp terminal version is easy to apply in wire harness construction
Typical applications
Combiner boxes
Inverters
PV wire harnesses
Recommended fuse blocks, holders and fuseclips
BPVM modular fuse block with optional cover.
CHPV 1- and 2-pole modular fuse holders with optional open fuse indication.
1A3400-09 PCB fuseclip.
HPV in-line fuse holder assembly.
PV-1A10F
PV-2A10F
PV-3A10F
PV-3-5A10F
PV-4A10F
PV-5A10F
PV-6A10F
PV-8A10F
PV-10A10F
PV-12A10F
PV-15A10F
PV-20A10F
PV-1A10-T
PV-2A10-T
PV-3A10-T
PV-3-5A10-T
PV-4A10-T
PV-5A10-T
PV-6A10-T
PV-8A10-T
PV-10A10-T
PV-12A10-T
PV-15A10-T
PV-20A10-T
PV-1A10-1P
PV-2A10-1P
PV-3A10-1P
PV-3-5A10-1P
PV-4A10-1P
PV-5A10-1P
PV-6A10-1P
PV-8A10-1P
PV-10A10-1P
PV-12A10-1P
PV-15A10-1P
PV-20A10-1P
PV-1A10-2P
PV-2A10-2P
PV-3A10-2P
PV-3-5A10-2
PV-4A10-2P
PV-5A10-2P
PV-6A10-2P
PV-8A10-2P
PV-10A10-2P
PV-12A10-2P
PV-15A10-2P
PV-20A10-2P
PV-1A10F-CT
PV-2A10F-CT
PV31A10F-CT
PV-3.5A10F-CT
PV-4A10F-CT
PV-5A10F-CT
PV-6A10F-CT
PV-8A10F-CT
PV-10A10F-CT
PV-12A10F-CT
PV-15A10F-CT
PV-20A10F-CT
PVS-R 600 Vac/dc Class RK5 PV fuse
A range of UL 248-19 fastacting 600 Vdc Class RK5 fuses specifically designed to protect photovoltaic power systems in extreme ambient temperature, high cycling and low level fault current conditions (reverse
current, multi-array fault).
Ratings
Volts
600 Vac to UL 248-12
600 Vdc to UL 248-19
Amps 20-400 A
IR
200 kA RMS Sym. AC
20 kA DC (20-60 A)
10 kA DC (70-400 A)
Agency information
UL Listed, Std. 248-12, Class RK5, Guide JFGA, File E335324.
Photovoltaic to UL 248-19, CSA Component Certified C22.2, CE
Features
Current limitation for non-inductive circuits provides Class
RK5 current-limiting response to ground fault and short-circuit
conditions
Designed for the protection and isolation of photovoltaic systems
Typical applications
Photovoltaic systems
Inverters
Photovoltaic system DC safety switches
Recombiner boxes
PVS-R-20
PVS-R-25
PVS-R-30
PVS-R-35
PVS-R-40
PVS-R-50
PVS-R-60
PVS-R-70
PVS-R-80
PVS-R-90
PVS-R-100
PVS-R-110
PVS-R-125
PVS-R-150
PVS-R-175
PVS-R-200
PVS-R-225
PVS-R-250
PVS-R-300
PVS-R-350
PVS-R-400
150 Vac/dc (UL), 70 to 1000 A
North American style bolted tag high speed fuses used for the
protection of DC common bus, DC drives, power converters /
rectifiers and reduced rated voltage starters.
Ratings
Volts
150 Vac/dc (UL)
80 Vdc 1000 A only
Amps 70-1000 A
IR
100 kA RMS Sym. (70-400 A)
200 kA RMS Sym. (450-1000 A)
20 kA at 150 Vdc (70-800 A)
100 kA at 80 Vdc (70-1000 A)
Agency information
UL Recognized JFHR2, E91958
CE
FWJ North American
1000 Vac /800 Vdc (UL), 35 to 2000 A
North American style bolted tags high speed fuses for the protection
of DC common bus, DC drives power converters/rectifiers, reduced
rated voltage starters and high voltage traction inverters.
Ratings
Volts
1000 Vac
800 Vdc
Amps 35-2000 A
IR
25 kA RMS Sym. (35-200 A)
100 kA RMS Sym. (250-2000 A)
50 kA at 800 Vdc (35-200 A and 450-600 A)
Agency information
UL Recognized, JFHR8, E91958 on 50-600 A only
CE
FWJ-35A
FWJ-40A
FWJ-50A
FWJ-60A
FWJ-70A
FWJ-80A
FWJ-90A
FWJ-100A
FWJ-125A
FWJ-150A
FWJ-175A
FWJ-200A
FWJ-250A
FWJ-300A
FWJ-350A
FWJ-400A
FWJ-500A
FWJ-600A
FWJ-800A
FWJ-1000A
FWJ-1200A
FWJ-1400A
FWJ-1600A
FWJ-1800A
FWJ-2000A
FNQ-R Class CC Limitron time-delay,
rejection-type fuse
Time-delay, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading FNQ-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions.
Ratings
Volts
600 Vac (or less)
300 Vdc (15-20 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR
200 kA RMS Sym.
20 kA DC (15 and 20 A only)
Agency information
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
Time-delay compatible with inrush characteristic of small control
transformers
Current limitation at Class CC levels provides maximum
component short-circuit current rating protection
200 kA interrupting rating provides high ratings for control circuit
locations
Typical applications
Line protection, small control transformers
Industrial controls and panels
Isolated, in-line fuse holders
FNQ-R-1/4
FNQ-R-3/10
FNQ-R-4/10
FNQ-R-1/2
FNQ-R-6/10
FNQ-R-3/4
FNQ-R-8/10
FNQ-R-1
FNQ-R-1-1/8
FNQ-R-1-1/4
FNQ-R-1-3/10
FNQ-R-1-4/10
FNQ-R-1-1/2
FNQ-R-1-6/10
FNQ-R-1-8/10
FNQ-R-2
FNQ-R-2-1/4
FNQ-R-2-1/2
FNQ-R-2-8/10
FNQ-R-3
FNQ-R-3-2/10
FNQ-R-3-1/2
FNQ-R-4
FNQ-R-4-1/2
FNQ-R-5
FNQ-R-5-6/10
FNQ-R-6
FNQ-R-6-1/4
FNQ-R-7
FNQ-R-7-1/2
FNQ-R-8
FNQ-R-9
FNQ-R-10
FNQ-R-12
FNQ-R-15
FNQ-R-17-1/2
FNQ-R-20
FNQ-R-25
FNQ-R-30
FNM time-delay 13/32" x 1-1/2" supplemental fuse
Time-delay supplemental fuse. Color code green (250 Vac max). For superior protection, Eaton recommends upgrading to Bussmann series Low-Peak Class CC fuses.
Agency information
UL Listed, Std. 248-14, Guide JDYX; File E19180, CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Color coded for 250 Vac maximum
Melamine tube construction with nickel-plated brass endcaps
Typical applications
Circuits with high inrush currents (motor/transformer loads)
Supplemental protection for 125 Vac and 250 Vac inductive circuits
FNM-1/10
FNM-1/8
FNM-15/100
FNM-2/10
FNM-1/4
FNM-3/10
FNM-4/10
FNM-1/2
FNM-6/10
FNM-3/4
FNM-8/10
FNM-1
FNM-1-1/8
FNM-1-1/4
FNM-1-4/10
FNM-1-1/2
FNM-1-6/10
FNM-1-8/10
FNM-2
FNM-2-1/4
FNM-2-1/2
FNM-2-8/10
FNM-3
FNM-3-2/10
FNM-3-1/2
FNM-4
FNM-4-1/2
FNM-5
FNM-5-6/10
FNM-6
FNM-6-1/4
FNM-7
FNM-8
FNM-9
FNM-10
FNM-12
FNM-15
FNM-20
FNM-25
FNM-30
FWJ North American
1000 Vac /800 Vdc (UL), 35 to 2000 A
North American style bolted tags high speed fuses for the protection
of DC common bus, DC drives power converters/rectifiers, reduced
rated voltage starters and high voltage traction inverters.
Ratings
Volts
1000 Vac
800 Vdc
Amps 35-2000 A
IR
25 kA RMS Sym. (35-200 A)
100 kA RMS Sym. (250-2000 A)
50 kA at 800 Vdc (35-200 A and 450-600 A)
Agency information
UL Recognized, JFHR8, E91958 on 50-600 A only
CE
LCT, LET BS88
240 Vac/150 Vdc (IEC), 250-280 Vac/150 Vdc (UL), 6 to 180 A
BS88 style bolted tag high speed fuses for the protection of DC
common bus, DC drives, power converters/rectifiers and reduced
rated voltage starters. Low watts loss in a compact size.
Ratings
Volts
LCT 240 Vac/150 Vdc (IEC), 250 Vac/150 Vdc (UL)
LET 280 Vac/150 Vdc (UL, 25-160 A), 250 Vac/150 Vdc (UL 180 A)
Amps 6-180 A
IR
200 kA RMS Sym.
50 kA DC at 125 Vdc
100 kA at 80 Vdc (70-1000 A)
Operating class aR.
Agency information
Designed and tested to BS88 Part 4 and IEC 60269 Part 4
UL Recognized*
CCC (LCT only)
CE
* All fuses have been tested at 318 Vac. Consult Bussmann series product
representative for UL Recognized status.
6LCT
10LCT
12LCT
16LCT
20LCT
25LET
32LET
5LET
50LET
63LET
80LET
100LET
125LET
160LET
180LET
FNQ-R Class CC Limitron time-delay,
rejection-type fuse
Time-delay, branch circuit, rejection-type fuse. For superior electrical
protection, Eaton recommends upgrading FNQ-R fuse applications
to Bussmann series Low-Peak LP-CC fuses, see page 1-5. For
dimensions.
Ratings
Volts
600 Vac (or less)
300 Vdc (15-20 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR
200 kA RMS Sym.
20 kA DC (15 and 20 A only)
Agency information
UL Listed, Std 248-4, Class CC, Guide JDDZ, File E4273,
CSA Certified, Class 1422-01, File 53787, RoHS compliant, CE
Features
Class CC rejection feature, with appropriate fuse block, prevents
inserting lesser-rated supplementary fuses
Time-delay compatible with inrush characteristic of small control
transformers
Current limitation at Class CC levels provides maximum
component short-circuit current rating protection
200 kA interrupting rating provides high ratings for control circuit
locations
Typical applications
Line protection, small control transformers
Industrial controls and panels
Isolated, in-line fuse holders
FNQ-R-1/4
FNQ-R-3/10
FNQ-R-4/10
FNQ-R-1/2
FNQ-R-6/10
FNQ-R-3/4
FNQ-R-8/10
FNQ-R-1
FNQ-R-1-1/8
FNQ-R-1-1/4
FNQ-R-1-3/10
FNQ-R-1-4/10
FNQ-R-1-1/2
FNQ-R-1-6/10
FNQ-R-1-8/10
FNQ-R-2
FNQ-R-2-1/4
FNQ-R-2-1/2
FNQ-R-2-8/10
FNQ-R-3
FNQ-R-3-2/10
FNQ-R-3-1/2
FNQ-R-4
FNQ-R-4-1/2
FNQ-R-5
FNQ-R-5-6/10
FNQ-R-6
FNQ-R-6-1/4
FNQ-R-7
FNQ-R-7-1/2
FNQ-R-8
FNQ-R-9
FNQ-R-10
FNQ-R-12
FNQ-R-15
FNQ-R-17-1/2
FNQ-R-20
FNQ-R-25
FNQ-R-30
KTK fast-acting 13/32" x 1-1/2"supplemental fuse
Fast-acting supplemental fuse.
Black color code (600 Vac max).
For superior protection, Eaton
recommends upgrading to
Bussmann series Low-Peak Class
CC fuses.
Agency information
UL Listed, Std. 248-14, Guide JDYX, File E19180, CSA Certified,
C22.2 No. 248.14, Class 1422-01, File 53787, HRC-MISC, RoHS
compliant, CE
Features
Black color code for 600 Vac rating
Fast-acting for resistive loads
Melamine tube construction with nickel-plated bronze endcaps
Typical applications
Control circuits
Lighting circuit protection
Meter circuits
KTK-1/10
KTK-1/8
KTK-2/10
KTK-1/4
KTK-3/10
KTK-4/10
KTK-1/2
KTK-6/10
KTK-3/4
KTK-1
KTK-1-1/4
KTK-1-1/2
KTK-2
KTK-2-1/2
KTK-3
KTK-3-1/2
KTK-4
KTK-5
KTK-6
KTK-7
KTK-7-1/2
KTK-8
KTK-9
KTK-10
KTK-12
KTK-15
KTK-20
KTK-25
KTK-30
CH modular, IP20 finger-safe DIN-Rail holders for Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and
without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Storage and operating temperature
-4F (-20C) to +194F (90C) indicating
-4F (-20C) to +248F (120C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75C or 90C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and
threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CHM1DIU
CHM1DU
CHM2DIU
CHM2DU
CHM3DIU
CHM3DU
CHM4DIU
CHM4DU
CHM1DNIU
CHM1DNU
CHM1DNXU
CHM1DCIU
CHM1DCU
CHM2DCIU
CHM2DCU
CHM3DCIU
CHM3DCU
CHM4DCIU
CHM4DCU
CHCC1DIU
CHCC1DU
CHCC2DIU
CHCC2DU
CHCC3DIU
CHCC3DU
CHCC1DI-48U
CHPV1IU
CHPV1U
CHPV2IU
CHPV2U
ABC ferrule and ABC-V axial leads fast-acting 1/4" x 1-1/4 ceramic tube fuse
Ratings
Volts
250 Vac/125 Vdc (1/4-15 A, 20-30 A)*
250 Vac (18 A)
32 Vdc (self certified)
Amps 1/4-30 A
IR**
35 A (1/4-1 A @ 250 Vac)
100 A (11/2-3 A @ 250 Vac)
200 A (4-10 A @ 250 Vac)
750 A (12-15 A @ 250 Vac)
400 A (18-20 A @ 250 Vac)
10 kA (1/4-15 A @ 125 Vac)
1 kA (18-30 A @ 125 Vac)
10 kA (1/4-15, 20 A @ 125 Vdc)
400 A (25-30 A @ 125 Vdc)
200 A (25-30 A @ 250 Vac)
* CSA approvals for 25 A and 30 A are at 125 Vac IR 1000 A and Vdc IR 400 A
(IR 1000 A at 75 Vdc)
** Interrupting ratings measured at 70% 80% power factor on AC. The
interrupting ratings for 18 A and 20 A were measured at 85%-95% power factor on AC. The interrupting ratings for 25 A and 30 A were measured at 89% power factor on AC.
Agency information
UL Listed, Std. 248-14, Guide JDYX File E19180 up to 15 A; UL
Recognized, Guide JDYX2, File E19180, 18-30 A; CSA Certified,
Class 1422-01 and 1422-30, File 53787, RoHS compliant, CE
Features
Ceramic body allows for higher amp/volt rating combinations
Typical applications
Electronic circuits
CH modular, IP20 finger-safe DIN-Rail holders for
Class CC, midget and PV fuses
Bussmann series CH DIN-Rail fuse holders are for UL Class CC and
midget fuses, and IEC 10x38mm fuses. They are available with and without indication in 1-, 2- and 3-pole IP20 finger-safe versions. A variety of accessories extends their application flexibility and they may be ganged
together to meet specific application requirements.
Ratings
Volts
600 V (or less) UL
690 V (or less) IEC
1000 Vdc (or less) photovoltaic (PV)
Amps
30 A UL
32 A IEC
SCCR
33 kA photovoltaic
200 kA RMS Sym. (CHCC, CHM*)
* CHM SCCR is fuse interrupting rating dependent.
Agency information
CHCC, CHM; UL Listed Guide IZLT, Recognized Guide IZLT2, File
E14853
CHPV, UL Listed to 4248-19, Guide IZMR, File E348242
CSA File 47235, CHPV and CHM - Class 6225-30, CHCC - Class
6225-01
IEC 60269-2 (CHM, CHPV)
CCC
RoHS compliant
CE
Wire range
75C and 90C Cu
18-4 AWG (0.8-21.1mm2)
Solid, stranded and fine stranded*
* See data sheet 10430 for application details.
Terminals
Single or dual conductors
Comb busbar
Terminal screws
Standard phil-slot
Optional hex head (order by adding -H suffix to the catalog
number, e.g., CHM1DU-H)
Torque
30 lb-in (3.4 Nm) maximum
Flammability
UL 94V0, self-extinguishing
Storage and operating temperature
-4F (-20C) to +194F (90C) indicating
-4F (-20C) to +248F (120C) non-indicating
Features
High SCCR rated, UL Listed Class CC holder with optional open
fuse indication for 600 V and 48 Vdc (see catalog number table for
details)
Enhanced safety with IP20 finger-safe construction
UL Recognized midget and IEC 10x38mm holders with factory
assembled neutral pole option
Agency ratings up to 1000 Vdc for use with PV fuses.
Available remote PLC fuse indication module
Wiring flexibility with terminals rated for use with 75C or 90C
solid, stranded and fine stranded wire, and fork terminals and
comb busbars. (Use any higher temperature insulations at the
90C ampacity with appropriate derating.)
Complete range of UL Listed and high SCCR rated one- and threephase finger-safe comb busbars and power feed lugs
Optional hex head terminal screw makes it easier to achieve
necessary torque values
CHCC1DIU
CHCC1DU
CHCC2DIU
CHCC2DU
CHCC3DIU
CHCC3DU
CHCC1DI-48U
150 Vac/dc (UL), 70 to 1000 A
North American style bolted tag high speed fuses used for the
protection of DC common bus, DC drives, power converters /
rectifiers and reduced rated voltage starters.
Ratings
Volts
150 Vac/dc (UL)
80 Vdc 1000 A only
Amps 70-1000 A
IR
100 kA RMS Sym. (70-400 A)
200 kA RMS Sym. (450-1000 A)
20 kA at 150 Vdc (70-800 A)
100 kA at 80 Vdc (70-1000 A)
Agency information
UL Recognized JFHR2, E91958
CE
FWA-70B
FWA-80B
FWA-100B
FWA-125B
FWA-150B
FWA-200B
FWA-250B
FWA-300B
FWA-350B
FWA-400B
FWA-500A
FWA-600A
FWA-700A
FWA-800A
FWA-1000A
