Approvals
VDE 40007630, TUV R 50139166, UL E82292, CQC03001007764
Contact Data
Contact arrangement : 1 form A, 1 NO
Rated voltage : 30VDC, 250VAC
Max. switching voltage : 30VDC, 277VAC
Rated current : 3 to 10A
Contact material : AgNi, AgSnO, AgCdO
Min. recommended contact load : 100mA, 5VDC
Initial contact resistance : 100mohms at 1A, 5VDC
Frequency of operation : 360 ops./h
Operate time max. :
OJ/OJE-L: 15ms
OJ/OJE-D/H: 10ms
Release time max. : 4ms
Electrical endurance :
LM 3A, 250VAC, res., -30°C to +95°C 100x103 ops.
DM 5A, 250VAC, res, -30°C to +85°C 60x103 ops.
LMH(2) 8A, 250VAC, res., -30°C to +70°C 50x103 ops.
LMH2 8A, 250VAC,res., -30°C to +85°C 30x103 ops.
HM 10A, 250VAC, res., -30°C to +70°C 10x103 ops.
HM2 10A, 250VAC, res., -30°C to +85°C 10x103 ops.
HM6 10A, 250VAC, res., -30°C to +85°C 50x103 ops.
Contact ratings :
LM 3A, 250VAC
DM 5A 250VAC
LMH(2) 8A 250VAC
HM(2), HM6 10A 250VAC
Mechanical endurance, DC coil : 10x106 operations
Product code /Part Number
OJ-SH-105LM,000 / 1461404-1
OJE-SH-112LM,000 / 1461401-5
OJE-SS-112LM,000/ 4-1419128-6
OJ-SH-112LM,000 / 1461404-6
OJ-SS-112LM,000 / 2-1419129-1
OJ-SS-124LM,000 /3-1419129-1
OJ-SH-124LM,000 / 1461404-4
OJE-SH-105DM,000 /1461400-1
OJE-SS-105DM,000/2-1419128-8
OJE-SH-112DM,000 / 1461400-4
OJE-SS-112DM,000 /4-1419128-2
OJ-SH-112DM,000 / 1461406-4
OJ-SS-112DM,000 / 1-1419129-8
OJE-SH-124DM,000 / 1461400-5
OJE-SS-124DM,000 /6-1419128-2
OJ-SS-124DM,000/ 2-1419129-9
OJE-SH-105LMH,000/ 1461403-3
OJE-SH-105LMH-WG /1721875-2
OJE-SS-105LMH,000/1461034-2
OJ-SH-105LMH,000 /8-1419128-1
OJ-SH-106LMH,000/ 1461247-1
OJE-SH-109LMH,000 /1461403-2
OJE-SS-109LMH,000 /5-1419144-3
OJ-SH-109LMH,000 / 1461247-2
OJ-SS-109LMH2-WG/1721874-4
OJ-SS-109LMHF,000 / 1721083-5
OJE-SH-112LMH,000 / 1461403-4
OJE-SH-112LMH-WG/ 1721875-5
OJE-SS-112LMH,000 /5-1419128-0
OJE-SS-112LMH2 / 1721261-5
OJ-SH-112LMH,000 / 9-1419128-8
OJ-SH-112LMH2 /1-1721260-1
OJ-SS-112LMH,000 / 2-1419129-5
OJ-SS-112LMH2 / 1721260-5
OJ-SS-112LMHF,000 /1721083-1
OJE-SH-124LMH,000 /1461403-5
OJE-SH-124LMH-WG / 1721875-6
OJE-SS-124LMH,000 / 7-1419128-1
OJ-SH-124LMH,000 / 1461247-3
OJ-SS-124LMH,000 / 4-1419144-4
OJ-SS-124LMH2 / 1721260-6
OJ-SS-124LMH2-WG / 1721874-6
OJ-SS-124LMHF,000 /1461014-2
OJ-SH-105HM,000/1461405-3
OJE-SH-112HM,000/ 1461402-6
OJE-SS-112HM,000/ 4-1419128-3
OJE-SS-112HM2,000 / 1721539-5
OJ-SH-112HM,000 / 1461405-5
OJ-SS-112HM,000/1419135-3
OJ-SS-112HMF,000 / 1461078-5
OJ-SS-112HM6-WG / 2071398-1
OJE-SS-124HM,000/ 6-1419128-4
OJ-SS-124HM,000/ 1440007-2
OJ-SS-124HM2,000/ 1721538-7
Supplier: Medical cable, extrusion, cable, wire, connector, cable assembly, wire harness, pvc, hdpe, pp, ldpe, pcb, pcba, injection mold, injection molding, fixture, machining part, stamping part, tube, catheter, wire harness, release paper, release liner, flim, tape, silicone foam, sponge
Services: Export and shipping
Supplier: Food products, fruit and recreational plants, palm trees, generators, transformers, household electronics, ev charging stations, accumulators and battery systems, cooling appliances and frigotic systems for vehicles, furnitures (office and household types), copper tubes, powder metals for 3d printers, electrical equipment, defense products most notably drones (strategic /tactical), carrying boxes.
Services: Trade, sourcing and investment intelligence, supply chain development services, trade facilitation, inspection, operations support, full fledged trade/supply chain agency services
Buyer: High grade lead, zinc, antimony, manganese, iron ores.
Power Modules are Point of Load (POL) DC-DC converters integrating controller chips, chokes and I/O capacitors into a single power management package for step-down(buck) applications. The low profile and compact size enables significant saving of board space, high efficiency enhances application performance, and design structure allows automated assembly by standard surface mount equipment
The most common use for capacitors is energy storage. Additional uses include power conditioning, signal coupling or decoupling, electronic noise filtering, and remote sensing. Because of its varied applications, capacitors are used in a wide range of industries and have become a vital part of everyday life. We can supply different range of capacitors For more details please contact us
RF inductors are special inductors designed to be used in radio frequency (RF) and microwave applications. Inductors are basic passive components which serve to oppose changes in current flow. When current is applied from a battery or power source, the inductor temporarily stores it using a magnetic field. For price, specification and other details please contact us
Maltodextrin consists of Dglucose units connected in chains of variable length. The glucose units are primarily linked with(1 - 4) glycosidic bonds. Maltodextrin is typically composed of a mixture of chains that vary from three to 17 glucose units long. Maltodextrins are classified by DE (dextrose equivalent) and have a DE between 3 and 20. The higher the DE value, the shorter the glucose chains, the higher the sweetness, the higher the solubility, and the lower heat resistance. Above DE 20, the European Union's CN code calls it glucose syrup; at DE 10 or lower the customs CN code nomenclature classifies maltodextrins as dextrins. For price, specification and other details please contact us
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: 1. semiconductor / display material, part, equipment
2. electrical/electronic material, part, equipment
3. medical / biomaterial, equipment
4. machine metal part
5. chemical materials
6. power parts
7. car parts
8. cosmetic
9. consumer goods
Services: Consulting and advisory services:
offering expertise and support for businesses engaging in international trade, such as compliance with trade regulations, market entry strategies, and risk management.
Buyer: Material, parts and equipment