With advanced equipment, new technology, our home lifts are perfect combination with technology and art. They can be found in many famous villas in china, and it has been accepted by overseas markets, as europe, america, australia, south-east asia. A national gold palm and patent are also awarded for it.
For more details, please feel free to contact us.
Packing in containers
This tubular stranding machine is applied to copper wire, steel core, al wire or steel cable twisting. And it is also suitable for al-clad steel and al alloy twisting.
This machine has high mechanical, high reliable, high production efficiency with low energy consumption. It is with compact composition, easy to operation and low running noise.
Main technical specification
1.Single wire diameter: 1.3-5.0mm
2.Max. Stranding dia.: 21mm
3.Max. Rotating speed of the tubular: 600r/min
4.Drawing wheel diameter: 1250 (duel wheel )mm
5.Pulling wire speed: 15.7-246m/min
6.Pitch range: 40.22-448.07mm
7.Direction of stranding: two directions, left and right
8.Main motor (alternation frequency conversion motor frequency conversion adjusting speed) y280-8b3 740r/min 45kw (ac vs)
9.Take-up motor bpy132s-4, 5.5kw frequency conversion motor
10.Outlet wire speed 15-110m/min
11.Front pay-off reel 630 x 355 x 475 (hole 127)mm
1000 x 490 x 710 (hole 80) mm
12.Pay-off reel in the tubular 630 x 355 x 475 (hole 127)mm
13.Take-up bobbin pn800-pn2000mm
14.Overall size 23850 x 2680 x 1626mm
Nude packing in container
This continuous lead-sheathing extruder system is for lead sheath extrusion of cables and lead covering of vulcanization of rubber tubes.
Diameter range of lead sheath extruded is from 10mm to 110mm. There are two types of die rack. One is for dia. Between 10mm to 80mm, and another is for dia. Between 40mm to 110mm. Customer could choose one type or both types.
Both pure lead and lead alloy could be extruded properly by the machine. There are generally 4 types of lead alloys like the following:
A.Alloy of lead and antimony, percentage of antimony 0.5%-0.6%.
B.Alloy of lead, tin and antimony:
Percentage of tin: 0.4%, percentage of antimony: 0.2%
C.Alloy of lead, tellurium and copper
Percentage of tellurium: 0.04%
D.Alloy of lead, tin and cadmium
Percentage of tin: 0.2%
1.Main composition:
18-ton lead smelter
10-ton holding & cleansing furnace
Vertical type lead sheath stripper
Lead strip conveyor & feeder
Main engine and extruder
Take-up
Control panel
2.Main technical data:
Diameter of lead sheath extruder screw: 150mm
Cooling water capacity: 6.8t/h
Rotate speed of screw: 5-150rpm
Total power: 145kw
Turnout of lead extruder:
Pure lead (13-15rpm): 30-35kgs/min
Soft alloy (11-12rpm): 20-22kgs/min
Hard alloy (9-10rpm): 15-16kgs/min
Power of 18-ton lead smelter: 141.1kw
Power of 10-ton holding cleansing furnace: 101.1kw
Power of vertical type lead sheath stripper: 15kw
Power of lead strip conveyor & feeder: 1.5kw
Diameter range of lead sheath: a die stator fame 10-80mm
B die stator fame 40-110mm
Dia. Range of drum of take-up: Ф250-Ф2500
Capacity of 18-ton lead smelter: 18ton
Overall size: 22000 x 13340 x 5100mm
Capacity of 10-ton holding & cleansing furnace: 10ton
Total weight: 41100kgs
Nude packing in contains
This tubular stranding machine is applied to copper wire, steel core, al wire or steel cable twisting. And it is also suitable for al-clad steel and al alloy twisting.
This machine has high mechanical, high reliable, high production efficiency with low energy consumption. It is with compact composition, easy to operation and low running noise.
Main technical specification
1. Single wire diameter: .0mm
2. Max. Stranding dia.: 21mm
3. Max. Rotating speed of the tubular: 600r/min
4. Drawing wheel diameter: 1250 (duel wheel )mm
5. Pulling wire speed: 15.7-246m/min
6. Pitch range: 40.22-448.07mm
7. Direction of stranding: two directions, left and right
8. Main motor (alternation frequency conversion motor frequency conversion adjusting speed) y280-8b3 740r/min 45kw (ac vs)
9. Take-up motor bpy132s-4, 5.5kw frequency conversion motor
10. Outlet wire speed 15-110m/min
11. Front pay-off reel 630 x 355 x 475 (hole 127)mm
1000 x 490 x 710 (hole 80) mm
12. Pay-off reel in the tubular 630 x 355 x 475 (hole 127)mm
13. Take-up bobbin pn800-pn2000mm
14. Overall size 23850 x 2680 x 1626mm
Nude packing in container
This line is designed to produce 8mm low oxygen and bright copper rods by means of continuous casting and rolling. The raw material is cathode copper or red copper scraps. This line is composed of one or two 6-100 ton stationary reverberatory furnace(s), five-wheel casting machine, pulling machine, rolling shearer, straightener & angle shaver, cast bar brushing machine, rolling machine, bright rod orbital coiler, electrical control system, etc. The 12t/h melting shaft furnace and 12t holding furnace are provided when copper cathode are used.
4. Main technical data
1) Outlet copper rod dia. 8mm
2) Production capacity around 16t/h
3) Coil’s weight 3.0-5.0 ton
4) Main equipment total size: 42x7.8x5.1m
(melting furnace and recycling cooler & filter excluded)
5) Main equipment total weight( melting furnace excluded) 82 ton
6) Main equipment total power(melting furnace excluded) 600kw
5. Line composition
1) Five-wheel continuous casting machine (patent no. Zl00244512.3) 1 set
2) Automatic shearer 1 set
3) Straightening & shaving machine 1 set
4) Cast bar brushing machine 1 set
5) Automatic feeding continuous rolling mill 1 set
6) Continuous rolling mill emulsion lubrication system 1 set
7) Rolling mill oil lubrication system 1 set
8) Coiler 1 set
9) Electrical control system 1 set
Nude packing in container
1. Application:
The line is mainly used to draw from dia.8mm copper rod to dia.1.3-4.0mm copper wire. And it also can continuously anneal when the drawing. The products produced from this line accord with gb3953 requirements.
2. Main data:
1) diameter of inlet wire: 8 mm (cool rolling solid copper rod)
2) diameter of outlet wire: 1.3-4.0mm
3) no. Of drawing mold: 13
4) diameter of drawing wheel: 450mm x 400mm x 65mm
5) max speed of outlet wire: 25m/s
6) annealing method: dc annealing
7) main motor: 280kw (dc), 1000r/min
8) motor z4-200-31 for capstan with fixed speed: 90kw(dc), 1500r/min
9) power of motor for take-up with double reels: z4-132-3, 22kw (dc, 2 sets)
10) annealing power: 360kva (max.)
3. Composition of the equipment
1) pay-off frame with column and rocker 1 set
2) main machine for drawing with horizontal sliding 1 set
3) device for horizontal continuous annealing 1 set
4) device for tension controlling of accumulator 1 set
5) take-up machine with double reels 1 set
6) take-up machine in the way of loop 1 set
7) machine for crushing head through mold 1 set
8) electrical control system 1 set
9) steam generator 1 set
10) lubricating system for gear box 1 set
Nude packing in container