Best application assistant for digital simulator system
Extremely low harmonic distortion - Even underÎ
Short Input/Output delay:
Pav series four-quadrant simulation power amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions.
It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc.
It is also the ideal r&d device of wind power, pv, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc.
It can directly connect to the popular simulation platform.
Best application assistant for real-time digital simulation system
With around 13 various power amplifier models and countless customized solution models, ponovos power amplifier could be able to suit for different real-time simulation sysmtem application requirements.
PAC60Cip is the portable six phase real time simulation amplifier.This current amplifier is similar to PAC60Ci but it has lower output power and less weight.
PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage.
PA30Bip-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bip but it has higher voltage output and power output.
PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight.
PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight.
Pav series four-quadrant simulation power amplifier based on linear power amplifier technology and integrated advanced technical performance and rich functions.
It is vastly used by the institutes in the area of power, new energy, aerospace, rail transport, mining, petrochemical etc.
It is also the ideal r&d device of wind power, pv, electric car, large power charging device, aerospace power system, marine power system, distribute energy, micro grid etc.
It can directly connect to the popular simulation platform.
PAC2000 amplifier is high quality linear power amplifier specially designed for power system simulation.It realized the high accuracy of the high power and high current successfully.It meets all kinds of capacitive load and inductive load.
Features
1 Channels current outputs. The output current of each channel can reach 200A RMS. The maximum output power can reach 2400VA.
PAC60Ci is the six-phase real time simulation amplifier. This current amplifier is possessed of high accuracy and fast liner response.
PA60Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher current output and power output.
PA30Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher voltage output and power output.
PA30Bi-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bi but it has higher voltage output and power output.
PAC60Ti is the six-phase real time simulation amplifier with high accuracy and fast liner response. This current amplifier can generate high power. For static status, the maximum output power can reach 600VA; for transient status, the maximum output power can be 800VA.
PAV250Bi is six-phase real time simulation amplifier. Each phase of this voltage amplifier can output 250V RMS.
PAV120Bi is a six-phase real time simulation amplifier.Each phase of this voltage amplifier can output 120V RMS.
Best application assistant for real-time digital simulation system
With around 13 various power amplifier models and countless customized solution models, ponovos power amplifier could be able to suit for different real-time simulation sysmtem application requirements.
Best application assistant for digital simulator system
Extremely low harmonic distortion - Even under
Short Input/Output delay:
PCT200Ai is the current transformer test set can finish various tests of different transformers. Compared with PCT200i,its accuracy is higher.This CT analyzer can test the 0.2s class CT.Only this CT analyzer - the high-accuracy current transformer test set has passed the tests held by Wuhan High Voltage Research Institute.The max permissible error of ratio measurement is �0.05% and max phase measurement is �2min.
Features
Can test M/P/TP type CTand PT
Ratio check up to 35000:1 and 45000:5
Knee point check up to 45000 V
Standards: IEC 60044-1, IEC 60044-6, IEC 61869-2, ANSI/IEEE C 57.13
Result saved directly in Excel format
Report can be transferred to flash disk via USB port.
Weight : 14kg
PW336i(6*15A,4*150V)is a powerful secondary injection relay tester with 6-currents and 4-voltages sources.This advanced relay testing set is capable of testing differential relay easily without changing cable connection.Optional upgrade is available to support the test of IEC61850 relay.
Features
6*15A, 4*150V
Aux DC (0-300V), DC measuring inputs
8 binary inputs, 4 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
PCT200i is specially designed for current transformer characteristic test. PCT200i owns more test items and higher technical parameters.This CT analyzer can finish the measurement class CT and TYP class CT.The additional functions include ratio and angle differential tests (the measurement points in the GB standard),FS and inductance,steady-state parameters,peak error and transient parameters,etc.
Features
Test CT according to IEC60044-1/6, IEC61869-2, C57.13
Can test all types of CT, including bushing and GIS type CT
One test can get all CT parameters
Fast test time for excitation test
10kV knee point test: 50s
1kV knee point test: 15s
Ratio check up to 30,000:1
Knee point check up to 30,000V
PT test functions are also in-built
Test results can be saved to flash disk
Optional Excel format report generation
Large color LCD display
Weight : 10kg
PAC60Cip is the portable six phase real time simulation amplifier.This current amplifier is similar to PAC60Ci but it has lower output power and less weight.
PA30Bip is real time simulation amplifier with three-phase current and four-phase voltage.
PA30Bip-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bip but it has higher voltage output and power output.
PAV250Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV250Bi but it has small size and less weight.
PAV120Bip is the portable six-phase real time simulation amplifier. This voltage amplifier is similar to PAV120Bi but it has small size and less weight.
Phpc01 current booster is specifically designed to supply high compliance voltage even at small current range. It is suitable for testing high burden electromagnetic current relays.
PGPS02 It provides GPS synchronization signal in PPS (pulse per second) or PPM (pulse per minute) for synchronized test. Trigger time can be set for end-to-end test application.
PSS01 This accessory can work together with PONOVO relay testing device. PSS01 is to be used to simulate the circuit breaker operation to check the relay scheme performance. Complicated software can be avoided by using this simple accessory.
PACB108 The passive optical scanning head PACB108 detects the status of an LED. That can be an optical pulse output from an energy meter, the binary status of protective relay or other similar optical source.
The PGPS04 is a multi-functional time synchronization device that integrates with GPS time synchronization, IRIG-B outputs (DC-TTL / DC-RS422 / optical), IRIG-B pulse input(DC-TTL / DC-RS422 / fiber), 1PPS/1PPM pulse outputDC- TTL / DC-RS232 / fiber),
timing set of whole trigger points, real-time clock auto-generating and other relevant functions.
NF802 is the new generation of digital relay test equipment with local control. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF802 integrated some unique functions including: the abnormal SVGOOSE simulation, virtual terminal test, the optical power testing and so on
Features
8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power
Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently.
Local control with quick control buttons
Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send.
Can check the GOOSE communication link
SV, GOOSE configure message can be saved and recall repeatedly
With the IEEE1588 synchronization function, deviation of the time is less than ±80ns
With GPS, IRIG-B code synchronization interface.
PNS630 portable analyzer was designed for smart substation maintenance.
IEC61850-8-1(Goose),IEC61850-92, IEC60044-7/8 msssage can be monitored and analyzed, digital relay test function also equipped. SMV GOOSE message numerical and status analysis were realized and dispalyed visually by its numerical analyzing function.
Features
1) Support IEC 61850-9-2, IEC 60044-7/8 (FT3), GOOSE, IRIG-B and IEEE1588 standards.
2) Support SCD, ICD, CID files analysis to get sampling value, sampling channel and GOOSE signal configuration.
3) Support SCD displayed in graphics.
4) Support SMV ang GOOSE monitor, and record the abnormal messages.
5) Support IEC60044-7/8 (FT3) receving and sending. The baud rates 2.5Mbps, 5Mbps, 10Mbps is available.
6) Support IEC 61850-9-2/9-2LE receiving and sending. ASDU 1-8 is available.
7) Support message monitor and record (PCAP format) for analysis.
8) Support network load analysis.
9) Support phase check.
10) Support IRIG-B and IEEE 1588 synchronization to provide time synchronization and clock source.
11) Simulate MU to output IEC61850-9-2, IEC 60044-7/8 to test digital relays.
12) Support IED time delay and SOE test.
13) Support MU time delay test, synchronization and time test.
14) Support to output messages in different flow.
15) Support SMV in different status in maximum 10.
16) Support DC testing to test digital voltage, CT and PT�??s polarity.
17) Support dBm test within -31dbm~-14dbm at wavelength 1310nm.
18) Large LCD screen to operate.
19) Chargeable battery for continuous working 6 hours above.
Precisely and automatically complete power filter amplitude frequency and phase frequency characteristic measurement.Automatically measure power filter by parameters of reactor, capacitor and resistor.Compensate and measure capacitor group unbalanced current 0.01 mA�10 mA
Features
Quickly and accurately test all parameters of power filter by this single device
High precision: field test accuracy can reach 5�.
High efficiency: compared to the traditional testing methods it saves much time and labor force.
Safe and reliable: using high-frequency low-level signal does not generate dangerous high voltage. Thus no safety issue is in the picture in the field.
NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on.
Features
8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power
Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently.
Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send.
Can check the GOOSE communication link
SV, GOOSE configure message can be saved and recall repeatedly
With the IEEE1588 synchronization function, deviation of the time is less than ±80ns
With GPS, IRIG-B code synchronization interface
PW336i(6*15A,4*150V)is a powerful secondary injection relay tester with 6-currents and 4-voltages sources.This advanced relay testing set is capable of testing differential relay easily without changing cable connection.Optional upgrade is available to support the test of IEC61850 relay.
Features
6*15A, 4*150V
Aux DC (0-300V), DC measuring inputs
8 binary inputs, 4 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
PW466i (6*20A, 6*150V) is a powerful secondary injection test set with 6-currents and 6-voltages sources.This advanced secondary injection kit is capable of testing differential relay and synchronizing relay. Optional upgrade is available to support the test of IEC61850 relay.
Features
6*20A, 6*150V
Aux DC (0-300V)
8 binary inputs, 4 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
PW460 (6*15A, 4*300V) is the 3 phase relay test equipment can test all types of protective relays.This relay test kit has in-built output monitoring and recording function and also supports testing kit IEC 61850 IED.Optional accessories include external amplifier,GPS,Circuit Breaker Simulator,Current Booster,etc.
Features
6*15A, 4*300V
Aux DC (0-300V), DC measuring inputs
8 binary inputs, 8 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
PW460 (6*15A, 4*300V) is the 3 phase relay test equipment can test all types of protective relays.This relay test kit has in-built output monitoring and recording function and also supports testing kit IEC 61850 IED.Optional accessories include external amplifier,GPS,Circuit Breaker Simulator,Current Booster,etc.
Features
6*15A, 4*300V
Aux DC (0-300V), DC measuring inputs
8 binary inputs, 8 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
PW466i (6*20A, 6*150V) is a powerful secondary injection test set with 6-currents and 6-voltages sources.This advanced secondary injection kit is capable of testing differential relay and synchronizing relay. Optional upgrade is available to support the test of IEC61850 relay.
Features
6*20A, 6*150V
Aux DC (0-300V)
8 binary inputs, 4 binary outputs
Adjustable threshold (0-400V) for binary inputs
In-built analog monitoring and recording function
Can be upgraded to support the test of IEC61850 complied relay
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
NF801 is the new generation of digital relay tester. This digital relay tester is equipped with 8 optical ports, and its powerful data processing capability can achieve the full functional test of the IEC61850 devices. Support GPS\ IRIG-B\ IEEE 1588 synchronization, it makes the substation internal debugging and substation to substation combine debugging available. NF801 integrated some unique functions including: the abnormal SV\GOOSE simulation, virtual terminal test, the optical power testing and so on.
Features
8 fiber optical ports for:Receiving and sending IEC61850-9-2 format SV and GOOSE message;Receiving and sending IEE1588 message;Measuring received fiber optical power
Provide flexibility to configure both SV (IEC61850-9-2) and GOOSE ports independently.
Each port can be configured as Receive and Send at the same time or it can be configured as Receive or Send.
Can check the GOOSE communication link
SV, GOOSE configure message can be saved and recall repeatedly
With the IEEE1588 synchronization function, deviation of the time is less than ±80ns
With GPS, IRIG-B code synchronization interface
TD series testing equipment consists of control unit and DC high current output unit.TD2000,the DC test equipment outputs 0-2000A with 0.1% high accuracy DC current used in HVDC convertor station and testing DC current transformer characteristics.
Features
Manual and auto test by software
Output DC current waveform by USB port
Multi high current connector for busbar
Easy panel control with LCD display and rotary encoder
T1000 primary injection test set is the model featured with light weight and 2 minutes output time at 1000a. This ideal primary injection test set with lcd display, quick control button and rotating mouse is very easy and convenient to operate.
Features
2 minutes continuous output at 1000a
Flexible control over output, such as manual, ramp, etc
Independent aux dc supply
In-built multi-meter facility
Typical ct testing functions are also included
Weight : 30kg
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
T1000 primary injection test set is the model featured with light weight and 2 minutes output time at 1000A. This ideal primary injection test set with LCD display,quick control button and rotating mouse is very easy and convenient to operate.
Features
2 minutes continuous output at 1000A
Flexible control over output, such as manual, ramp, etc
Independent Aux DC supply
In-built multi-meter facility
Typical CT testing functions are also included
Weight : 30kg
PAC2000 amplifier is high quality linear power amplifier specially designed for power system simulation.It realized the high accuracy of the high power and high current successfully.It meets all kinds of capacitive load and inductive load.
Features
1 Channels current outputs. The output current of each channel can reach 200A RMS. The maximum output power can reach 2400VA.
PAC60Ci is the six-phase real time simulation amplifier. This current amplifier is possessed of high accuracy and fast liner response.
PA60Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher current output and power output.
PA30Bi is real time simulation amplifier with three-phase current and four-phase voltage.This digital power amplifier is similar with PA30Bi but it has higher voltage output and power output.
PA30Bi-H is digital power amplifier with three-phase current and four-phase voltage. It is similar with PA30Bi but it has higher voltage output and power output.
PAC60Ti is the six-phase real time simulation amplifier with high accuracy and fast liner response. This current amplifier can generate high power. For static status, the maximum output power can reach 600VA; for transient status, the maximum output power can be 800VA.
PAV250Bi is six-phase real time simulation amplifier. Each phase of this voltage amplifier can output 250V RMS.
PAV120Bi is a six-phase real time simulation amplifier.Each phase of this voltage amplifier can output 120V RMS.
Your best testing accessory with PCT200 CT/PT tester
for multi-ratio CT testing
/No need for rewiring
/Automatic check wiring connection
/Shorter commissioning times
/Up to six connections for the secondary side of the current transformer
/Max 6 combined multi-taps results showing in one report
/Measure the secondary burden
/No software upgrade or hardware upgrade with PCT200i/PCT200Ai in use
T1000 primary injection test set is the model featured with light weight and 2 minutes output time at 1000A. This ideal primary injection test set with LCD display,quick control button and rotating mouse is very easy and convenient to operate.
Features
2 minutes continuous output at 1000A
Flexible control over output, such as manual, ramp, etc
Independent Aux DC supply
In-built multi-meter facility
Typical CT testing functions are also included
Weight : 30kg
