Features
Core to core alignment by pas technology ( pas:profile alignment system)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch tft color lcd monitor with clear digital image display
Usb & vga interface
Software upgrade via usb interface
Specifications
Model Kl-300t
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µm)
16mm(coating diameter: 250 ~ 1000µm)
Fiber diameterCladding diameter:80 ~150µm coating diameter:100~ 1000¦ìm
Fiber countSingle
Fiber aligning methodCore or clad aligning
Image processing methodDigital
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing timeTypical 9 sec, with standard sm fiber
Splicing mode53(templet), 40(user)
Splice loss estimateMore accurate
Return loss>60db
Storage of splice result4000 results, 20 parameter per result
Fiber display and magnification300x(x or y view), 150x(x and y view)
Tube heating timeTypical 30 sec
Tube heating mode9(templet), 24(user)
Tube heating temperatureCan be adjusted
Applicable protection sleeve length60mm, 40mm and a series of micro sleeves
Tension test2n
Electrode life2500
No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery
Display screen5.6 tft inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsUsb 1.1 and vga
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10¡«50¡æ, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x150mm (h)
Weight2.7 kg excluding battery, 3.2 kg including battery.
Features
Rugged construction providing shock, dust and moisture resistance
Dual monitor position with automatic image orientation
Automatic arc calibration and iber identiication
User-selectable iber clamping method sheath clamp or fiber holders
Auto-start tube heater feature
Color LCD display with anti-relective coating for excellent visibility in bright sunlight
Simultaneous battery charge and splicer operation
Long life battery (up to 160 splice/heat cycles per charge)
Detachable work table incorporated into the transit case
Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet
Green friendly RoHS & WEEE compliant
Specifications
Model FSM-60S
Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655)
Cladding Diameter 80 um to150 um
Coating Diameter 100 um to 1000 um
Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter
Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS
Splicing Time Typical 9 seconds with standard single-mode fiber
Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 300X for single X or Y view, or 187X for X and Y view
Viewing method Dual cameras with 4.1 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively
mechanical Proof Test 1.96 to 2.25N
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves
Protection Sleeve Length 60mm, 40mm, micro
Splice Cycles with Battery Typical 160 cycles with power save functions activated
Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery
Terminals USB 1.1 (USB-B type) for PC communication.
Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection Max. wind velocity of 15m/s. (34 mph)
Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches
Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Features
Fiber core can be display clearly
Single x or y view and x & y view simultaneously
Auto check quality of , cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color lcd monitor with clear digital image display
Simple operation menu
Specifications
ModelKl-280
Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655)
Fiber cleaved length8~16mm(coating diameter: 250µ,m)
16mm(coating diameter: 250 ~ 1000µ,m)
Fiber diameterCladding diameter: 80 ~150µ,m coating diameter: 100~ 1000¦ìm
Fiber countSingle
Fiber aligning method Core , aligning
Return loss>60db
Actual average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Splicing modeAuto
Splicing mode12(templet), 188(user)
Typical splicing timeTypical 9 sec, with standard sm fiber
Protection sleeve length60mm, 40mm and a series of micro sleeves
Storage of splice result5000 results, 3 parameter per result
Tension test2n
Fiber display and magnification400x(x or y view), 200x(x and y view)
Tube heating timeTypical 30 sec
Electrode life2500
No.Of splice/heating with batteryTypical 130 cycles (splice/tube heat) with inner li-battery
Display screen5 inch color lcd monitor
Image change overThe fiber image is turned upside down
TerminalsRs 232
Operating condition0 ~ 5000m above sea level, 0 ~ 95%rh and -10 50c, respectively, max. Wind velocity of 15m/s
Power supplyAc 100-240v with ac adapter,inner li-battery(6600mah)
Dimensions150mm(l) x150mm (w) x160mm (h)
Weight3.52 kg including battery.
Features
Color LCD monitor & 256 magnification
Compact & light weight
Reversible monitor with control panel on each side
Max. Wind velocity of 15m/s.
8 sec. Splice time, 40 sec. Tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8000 groups of splice results
Multiple language options
Specifications
ModelDvp-730
Applicable fibersSm, mm, ds, nz-ds, edf
Cladding diameter100 to 150um
Coating diameter100 to 1000um
Fiber cleaved length8-22mm (standard)
Splicing modeAuto & manual
Average splice loss0.02db(sm), 0.01db(mm), 0.04db(ds), 0.04db(nzds)
Return loss 60db
Environment conditions-25-+50(operation temperature), 0-95%rh(humidity), 0-5000m (altitude)
Storage environment-40-+80(temperature), 0-95rh (humidity)
Protection sleeve length20mm, 40mm, 60mm
Tension test2.0n (standard)
LanguageEnglish, chinese, korea, russian, spanish etc.
InterfaceRs232 interface & video output
Power supplyAc adaptor: 85-260v input voltage
Internal battery: 12v voltage, 10ah, up to 200 times of continuous splices and heatsdc adaptor: 12v voltage, optional multipurpose external battery
Dimensions170(w)140(h)170(d)mm
Weight3.3kg.
Features
High-resolution true color 5.7 inch LCD display
The advanced core to core fiber profile alignment system(PAS)
Real time calibrating system, parameter needn't be adjusted
X/Y axes were displayed meanwhile, Magnification up to 304 times
8 seconds splicing time, 30 seconds Heat-Shrinking
Battery capacity was display in real time, precisely
Built-in high capacity battery, support 220 times splicing and heating, to meet one days'work
Long Electrode Lifetime, up to 4000 times
The new wind-cover design, enhance the ability to prevent the dust & wind, Max. wind velocity of 15m/s
Three Splicing modes: auto, half-auto, manual
Built-in super high-brightness LED supply convenience for night work
Auto calculate splicing loss
Small bulk and light weight, only 2.8kg include battery
4000 results Storage
USB data interface &VGA
One button operation to finish results download or software update
Close shield splice automatically, Close heater lid heat automatically
One year Warranty
Specifications
Model M-50
Fiber Types SM(ITU-T G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655)
Average Splicing Loss 0.02dB with G.652, 0.01dB with G.651, 0.04dB with G.653 and G.655
Splicing & Heating Time Typical splicing time:8s Typical heating time:30s
Return Loss 60dB or greater
Fiber Coating 100 m to 1000 m
Fiber Cladding 80 m to 150m
Fiber Cleave Length 8-16mm(coating diameter<250 m), 16mm(coating diameter 250-1000 m)
Program 10 units factory setting SM program, 10 units factory setting MM program,30 units user setting SM program,30 units user setting MM program
Align Mode Advanced profile alignment system(PAS)
Storage 4000 results
Data Transmission USB port &VGA
Heater Auto Heat Mode, the typical heating time is 30 seconds
Heat-Shrinkable Tube 40mm, 60mm and a series of micro Heat-Shrinkable Tubing
Screen Display Two CMOS cameras,5.7 inch 640*480 LCD., core of the fiber is clearly visible
Lighting for Construction Built-in super High-brightness LED supply convenience for night work
Magnifications Vertical 152 times, horizontal 304 times
Work mode Automatic, Half Automatic, Manual
strong>General Specifications
Power Supply Alternating Current:100-240 50Hz/60Hz 30W, Direct current:13.5V/4.5A
Built in 11.1V Li-ion battery charger and AC adaptor
Battery Life Support 220 times splicing and heating on one charge(3.5hours) at least
Battery Lifetime Cycle life up to 300-500 times, replaceable
Tension Test 2N
Electrode Lifetime >4000 times, replaceable
Operating Temperature -25 -50
Storage Temperature -40 -80 sing)
Work Altitude 0~5000 meters
Instrument Weight 2.3kg(no battery ), 2.8kg(including battery)
Dimensions(L x W x H) 160mm¡Á150mm 140mm
Package G.W/N.W 8.0/7.0kg
Package (L x W x H) 500mm 350mm 400mm.
