1. Suitable for gross ribbon width: 2000mm-5400mm
2. Suitable for gross ribbon thickness: 1.5mm-20mm
3. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation)
4. Diameter of annealing lehr roller: 216mm-365mm.
. Linear speed of annealing lehr roller: 80-1500m/h (stepless speed variation)
4. Diameter of annealing lehr roller: 216mm-365m.
After a dozen times of improvements by our engineers and technicians, our cold end equipment has already become well-received by our customers and has been installed onto several production lines. It adopts frequency modulation and speed regulation system and servo system and has stepless transmitting speed variation and stable operation. Electronic touch screen is adopted and easy to operate.
Main technical index:
1. The radial direction run-out of the conveying roller is 0.1 mm.
2. The static balance of the conveying roller is 1kg.
3. The deflection of the roller is 1mm.
4. The error of center line balance of any roller is 1mm.
5. The whole length relative error of level wave is l ¡à1mm.
6. The whole length glass deviation of the cold end roller is 20mm.
1000*1000*1000
Longitudinal cutting machine
Main technical index:
1. The cutting accuracy: 0.5mm
2. The cutting thickness: 1.19mm
3. The accuracy of auto positioning:0.5mm
4. The biggest ribbon width: 4800mm
5. The range for pressure regulating: 100n.
1000*1000*1000
Description: it is applied to large size doghouse. A couple of chargers are linked together so as to reduce their distance. In this way, it can well solve the batch off-track problem and cancel the water drum in the middle of batch tank. The batch could be evenly charged and its operation is very stable and continuous. By absorbing the batch charger technology at home and abroad, our company has tried some innovation on the batch charger in terms of its shovel plate quality and structure, thus improved its high temperature resistance in production, working stability and continuity. There are two types of batch chargers, namely arc blanket charger and inclining blanket charger.
1000*1000*1000
Description:
Horizontal drawing machine is a very important equipment made by our company and is a widely used complete operation system in sheet glass forming by drawing, annealing, conveying, cold end cutting, sheet picking up etc. Based on belgian horizontal drawing machine technology of colburn process, we have re-designed and re-formed it by combining the domestic production and working conditions in one furnace three lines and one furnace four lines. It emphasizes on the functions of producing wide ribbon, ultra thin, high quality sheet glass and has the characteristics of high speed, stability and precision. It can produce sheet glass as thin as 1 mm.
Main technical index:
1. Thickness of glass sheet: 0.7mm8mm
2. Width of glass sheet: 1000mm4300mm
3. Pulling speed: 50300 m/h.
1000*1000*1000.
The top roller installed at the both sides of the tin bath can effectively control the width and thickness of the gross glass ribbon.
The main technical index:
1. The thickness of glass sheet:1.0-25mm
2. The horizontal oscillative angle of head:
3. The accuracy of head's oscillative angle:
4. The speed of rotating coil of head: 10-1500m/h
5. The accuracy of coil-speed of head: 0.01%
6. The radial direction run-out should be no more than 0.2mm
7. The accuracy of head's pressed-depth: 0.1mm
8. The biggest depth for head (inside the bath): 2000mm
9. The longest distance of machine frame for lifting up and down: 100mm
10. The accuracy of machine frame for lifting up and down: 0.1mm
11. All the above index can be customer-designed.
1000*1000*1000
