After a dozen times of improvements by our engineers and technicians, our cold end equipment has already become well-received by our customers and has been installed onto several production lines. It adopts frequency modulation and speed regulation system and servo system and has stepless transmitting speed variation and stable operation. Electronic touch screen is adopted and easy to operate.
Main technical index:
1. The radial direction run-out of the conveying roller is 0.1 mm.
2. The static balance of the conveying roller is 1kg.
3. The deflection of the roller is 1mm.
4. The error of center line balance of any roller is 1mm.
5. The whole length relative error of level wave is l ¡à1mm.
6. The whole length glass deviation of the cold end roller is 20mm.
1000*1000*1000
Supplier: Glass machinery for glass production lines such as batch charger, tin bath, annealing lehr, cold end, glass cutting machine, stacker, air table
Cooling section of the front-end using the high-pressure air quenching cold, low-pressure air cooled rear section, so that degree of tempered glass particles to be greatly enhanced, and have energy-saving effect. Mainly for the production of construction, decoration, household appliances, industrial with flat tempered glass. Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change. ÐͺŠModel ×î´ó¹æ¸ñMax..Size ×îйæ¸ñMin.Size ºñ¶È Thickness ²úÁ¿(Ãײ/Ðʱ) Capacity(m²/h) ¹©µç¹¦ÂÊKVA Transtormer Power QYP-T2004 2000Á400 50Á50 3-15 48 110 QYP-T2006 2000Á600 100Á100 3-15 64 140 QYP-T2010 2000Á1000 100Á100 3-19 77 200 QYP-T2510 2500Á1000 200Á100 3-19 96 300. Model ×î´ó¹æ¸ñMax..Size ×îйæ¸ñMin.Size ºñ¶È Thickness ²úÁ¿(Ãײ/Ðʱ) Capacity(m²/h) ¹©µç¹¦ÂÊKVA Transtormer QYP-T3015 3000Á1500 300Á100 4-19 58 400 QYP-T3020 3000Á2000 300Á100 4-19 78 500 QYP-T3620 3660Á2000 300Á100 4-19 92 630 QYP-T3624 3660Á2440 300Á100 4-19 114 700 QYP-T4224 4220Á2440 300Á100 4-19 131 850 QYP-T5024 5000Á2440 300Á100 4-19 155 1000 QYP-T6024 6000Á2440 350Á150 5-19 187 1100 QYP-T8024 8000Á2440 350Á150 5-19 248 1380. Packing:wooden boxes.
It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved. This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required. How to introduce the materials: A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions. Mixing ratio: A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16 Mixing system: The mixers by the end of the extension output hoses mixes the materials homogenously and completely. Cleaning: It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided. Technical specifications: Mixing ratio: 1:6 / 1:16 Material output: approx 2.7 kg./min. Which may deviate according to material used Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.) Operating pressure: between 250 - 450 bar Air pressure: max. 6 bar Power supply: 3 kw (380 v 59 hz.Expect the heaters) Controlling system: plc controlled Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm In wooden case
JOEO horizontal thermal shock test chamber,horizontal thermal shock machine,thermal cycling chambers,thermal cycle test chamber are ideal for batch testing and larger test loads. The chamber is designed for custom environmental stress screening of components and board level electronic components. The carrier basket transfers the load between the hot and cold zones in a two - or three-zone configuration. In the horizontal three zones, the product moves through the carrying basket between the cold zone and the environmental zone, and the hot zone moves to surround the carrying basket. A dual-effect thermal test systems (DTS) consists of three zones: a hot chamber at each end and a cold chamber in the middle. This design allows products to be moved between areas simultaneously through two product baskets - exposing twice as much product in one system to maximize your investment.
Temperature Cycling Test Chambers Fast change rates test chamber Temperature Cycle Test Chamber Fast change rates testing chamber is suitable for testing the changes of instruments,electrical,electronic products,machine�and�parts�under�the�rapid�temperature change�or�the�the�gradient�conditions, takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. Temperature cycling rates from 5 to 20�C/min. are possible. Two different ultimate low temperatures are available: -40�C or -70�C. The faster cycle times can be used to meet more aggressive test methods that require thermal stress during transitions. Significant test time can be saved in completing tests, as well. To demonstrate performance, Grande uses the international standard IEC 60068 3-5 measured at the supply air. Temperature cycles are run from hot to cold extremes, and the middle 80% of the transition is timed to determine performance. Your actual cycling results will vary depending on methodology, including the start and end temperatures, and the amount of samples loaded. Features QUALITY CONSTRUCTION Stainless steel exterior and interior Rounded interior corners for easy cleaning Full thermal break around doorframe and door Rotating door latch is easy and secure Dual-layer insulation of fiberglass and expanded foam for thermal integrity One 2" (50mm) to One 4" (100mm) diameter cable port on the left, with an impervious, flexible silicone plug Easy lift-off service panels Pressure relief port to allow air volume changes due to rapid temperature changes Three levels of overheat protection FTF PROGRAMMER/CONTROLLER Popular PID controller with touch-screen operation Stores 120 different profiles�with up to 1200 steps each (ramp, soak, jump, auto-start, end) Step types include: ramp, soak, jump, auto-start, and end Ethernet interface for remote monitoring and operation RECOMMENDED OPTIONS Dry air purge, to compensate for quickly shrinking air during cooling, as well as to reduce risk of condensation. Product temperature control, allows feedback from a second sensor on the product. Ensures faster completion of transition steps.
Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief introduction of jacketed glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features of jacketed glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250C for high temperature experiments, and limit temperature of -60C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
Brief about glass reactor: The kettle body is designed by double glazing glass reactor, the inner layer into the reaction solution to do the reaction was stirred interlayer can pass into the type of the cold heat source circulating heating or cooling the reaction can also be used in high temperature, low temperature, or vacuum experiment reflux and distillation of the reaction solution. It is the ideal equipment for primary and secondary schools of modern chemistry experiments, biopharmaceutical and synthesis of new materials. Features about glass reactor: 1. A full set of glassware with GG3.3 borosilicate glass production with good chemical and physical properties 2. Limit temperature of 250°C for high temperature experiments, and limit temperature of -60°C for low temperature experiments. 3. Titanium ring, new titanium alloy mechanical seal, sealing 0.098Mpa. 4. The PT100 temperature, and is a liquid crystal display. More accurate temperature measurement and more convenient. 5. Frequency control, AC induction motor. Constant speed, brushless, no spark, security and stability, and continuous work. 6. Quality 304 stainless steel all-inclusive PTFE stirring rod and a three-bladed propeller structure. 7. The bottom flanged discharge port with a Teflon value, aluminum parts flange fixed container no dead ends.
