Specifications :
Application:Belong to a turbine the diversion centrifugal pump can extract the liqiud of the vacuum tank under the pressure of negative pressure 0.09Mpa .
Spec:3T-180T,0.75KW-75KW
Material:SUS304 SUS316L (the pump body,pump cover,impellerwhich is contact with medium material ,made of stainless steel SUS316L and SUSI304
Standard:DIN, SMS
Impeller:Open type impeller ,semi-close type impeller
Surface treatment:The parts contacted with medium is polished
Working condition;sanitary centrifugal pumps is a high and low level transmission ,as well as the level transmission ,and has a amount of suction .
The max pressure of inlet:0.5MPa
Temperature range:-10C to +140C(EPDM)
washable mechanical sealing:
water pressure:Max 0.1MPa
flow rate:0.25-0.5L/min
Motor:
I. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electro-technical CommissionIEC60034.IEC60072 standard design comply with European "CE" marking requirements
II. The explosion-proof motor also available ,that can meet with the requirement of different applications .
III.It with excellent electric performance ,and with low noise,low vibration,the protection grade is IP55,insulation grade is F.
IIII.Operate in voltage:
3Kw,220-240V/380-420V,
¡Ý3Kw,380-420V/660-690V,
IV.frequency:50Hz/60Hz
V. working method:continuous(SI)
VI.rotate speed:the standard rotate speed is 2900r/min.
wood box.
Application
The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is instable,and the liquid level is lower than that of inlet to draw the material ,and also used as return in the CIP system .And it is the necessary convey equipment in the food,chemical ,pharmacy field.
Functions and specifications
The design adopt the side channel principle leading to the excellent suction,sanitariality ,low
power ,lower noise ,easy to clean ,and low cost to maintenance .
shaft sealing
YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel embedded in graphite structure ,and the movable ring made of silicon carbide .
Material
All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless steel .
The part contact with medium:AISI316L stainless steel
Other parts:AISI304 stainless steel
The sealing contact with medium:EPDM
Surface treatment
The part contact with medium is polished ,and other part is glass painted or sand blasted treatment.
Data sheet
Max Inlet Pressure:0.5Mpa
Temperature Range:-10¡ãC to +140¡ãC(EPDM)
flushed mechanical seal:
water pressure:Max0.1MPa
water consumption:0.25-0.5L/min
Motor
I)According to the configuration ,we adapt three phase¡°ABB¡±brand AC motor. The motor design according to the International Electronic Commission IEC 60034.IEC60072,and comply with the EC requirements of ¡°CE¡±marking requirement .
II).The explosion-proof motor also available ,that can meet with the requirement of different
applications .
III)It with excellent electric performance ,and with low noise,low vibration,the protection grade is
IP55,insulation grade is F.
Iv) The operate in voltage
¡Ü3Kw,220-240V/380-420V,
3Kw,380-420V/660-690V,
v)Frequency
50Hz/60Hz
VI)Operate way :Continuously
VII)Running Speed : 2900r/min
wood box.
Application
The pump is mainly used to deal with the convey of gas-bearing materials. So it is widely used in the occasions that the liquid level is instable,and the liquid level is lower than that of inlet to draw the material ,and also used as return in the CIP system .And it is the necessary convey equipment in the food,chemical ,pharmacy field.
Functions and specifications
The design adopt the side channel principle leading to the excellent suction,sanitariality ,low
power ,lower noise ,easy to clean ,and low cost to maintenance .
shaft sealing
YUY sanitary priming pump seal is mechanical seal ,include the stationary ring SUS316L steel embedded in graphite structure ,and the movable ring made of silicon carbide .
Material
All the part contact with medium ,pump case.pump cover and impeller are made of AISI316L stainless steel .
The part contact with medium:AISI316L stainless steel
Other parts:AISI304 stainless steel
The sealing contact with medium:EPDM
Surface treatment
The part contact with medium is polished ,and other part is glass painted or sand blasted treatment.
Data sheet
Max Inlet Pressure:0.5Mpa
Temperature Range:-10¡ãC to +140¡ãC(EPDM)
flushed mechanical seal:
water pressure:Max0.1MPa
water consumption:0.25-0.5L/min
Motor
I)According to the configuration ,we adapt three phase¡°ABB¡±brand AC motor. The motor design according to the International Electronic Commission IEC 60034.IEC60072,and comply with the EC requirements of ¡°CE¡±marking requirement .
II).The explosion-proof motor also available ,that can meet with the requirement of different
applications .
III)It with excellent electric performance ,and with low noise,low vibration,the protection grade is
IP55,insulation grade is F.
Iv) The operate in voltage
¡Ü3Kw,220-240V/380-420V,
3Kw,380-420V/660-690V,
v)Frequency
50Hz/60Hz
VI)Operate way :Continuously
VII)Running Speed : 2900r/min
wood box.
